LabMal specialises in online distribution of life science products & services, lab consumables and general lab equipment.
FEATURED PRODUCTS
PEDOT:PSS, conductive grade, 1.3 wt. % aqueous dispersion – Sigma-Aldrich
RM1,317.00Brand:
Sigma-Aldrich
Synonyms
PEDOT:PSS, Poly(2,3-dihydrothieno-1,4-dioxin)-poly(styrenesulfonate)
CAS No
–
General Description
A conducting polymer such as poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate) anions (PEDOT/PSS) is widely used in various organic optoelectronic devices. High electrical conductivity and good oxidation resistance of such polymers make it suitable for electromagnetic shielding and noise suppression. Thus, the polymer film was found to possess high transparency throughout the visible light spectrum and even into near IR and near UV regions, virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend. Impact of small electric and magnetic fields on the polymer was studied.
We are committed to bringing you Greener Alternative Products, which adhere to one or more of the 12 Principles of Green Chemistry. This product is used in energy conversion and storage, thus has been enhanced for energy efficiency. Click here for more information.
Applications
PEDOT:PSS polymeric films have been used as a charge dissipation layer in electron-beam lithography and focused ion beam milling. Sample preparation has been reported to be easier and quicker for various substrates, including gallium nitride (GaN) on sapphire (Al2O3) substrates, zinc oxide (ZnO), fused silica, lithium niobate (LiNbO3), silicon carbide (SiC) and diamond (C), spin-coated onto the ITO coated glass substrate. PEDOT: PSS layers have also been reported to be used as anode buffer layer for organic solar cells and as replacements for the transparent conductive coatings of organic solar cells. Various studies report the use of metal modified conductive grade PEDOT: PSS as an anode buffer layer in solar cells, example: copper phthalocyanine/fullerene-based solar cells 4 Conductive PEDOT:PSS combined with polyvinylidene fluoride (PVDF) membranes may be used to prepare PEDOT:PSS-PVDF ionic liquid soft actuators. The function of PEDOT:PSS as a pseudocapacitive material was investigated.
Virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend.
Features & Benefits
Antistat coating for plastic and glass.
Packaging
Packaged in glass bottles
SCF105 Sulbactam/Cefoperazone
RM0.00Brand:
Thermo ScientificTM OxoidTM
Lap Disk w/Reagent 50Tst/Kt
RM0.00Brand:
Thermo Scientific™ Remel™
Thermo Scientific™ Remel LAP Disc w/Reagent Test is used for rapid
differentiation of Aerococcus and Leuconostoc from Streptococcus,
Enterococcus, Lactococcus and Pediococcus using reagent impregnated disc.
Includes:
LAP disc and color developer included
Sodium sulfate anhydrous for analysis EMSURE® ACS,ISO,Reag. Ph Eur (Merck)
Price range: RM85.00 through RM105.00Brand:
Merck
Description
CAS number: 7757-82-6
Chemical Formula: Na₂SO₄
Molar Mass: 142.04 g/mol
Synonyms: –
EMSURE® grade solvents are suitable for a broad spectrum of classical lab applications and are frequently used in regulated and highly demanding lab applications. EMSURE® provides worldwide best and most extensive product specifications. We declare our EMSURE® range to be in compliance with the ACS, with the reagent part of the European Pharmacopoeia (Reag. Ph Eur) and also with the ISO standards.
Product Specification and MSDS for Sodium sulfate EMSURE® (Merck).
P1 Penicillin G
RM79.00Brand:
Thermo ScientificTM OxoidTM
Immobilized T4 DNA Ligase
RM1,470.00Brand:
New England Biolabs
Characteristics of Immobilized T4 DNA Ligase:
- Immobilized T4 DNA Ligase (IM T4 DNA Ligase) consists of T4 DNA Ligase covalently bound to magnetic beads.
- Easily remove enzyme from reaction using a magnet
- Avoid heat inactivation step, which may interfere with downstream applications
- Re-use immobilized enzymes
- Enable new workflows and applications
Gold nanoparticles, 50 nm, NHS ester functionalized, conjugation kit – Sigma-Aldrich
RM1,178.00Brand:
Sigma-Aldrich
Synonyms
NHS-activated gold nanoparticles
Cas No.
–
General description
Gold nanoparticles, 50 nm, NHS ester functionalized, conjugation kit is a comprehensive kit that enables easy, one-step conjugation of your amine-containing ligands to 50 nm gold nanoparticles. The kit includes pre-made mixtures of lyophilized (freeze-dried) NHS-activated gold nanoparticles, along with all the necessary materials for three independent conjugation reactions. The kit components comprise:
- 3 vials of 50 nm NHS-Activated Gold Nanoparticles (lyophilized)
- Protein Resuspension Buffer – 1.5ml
- Reaction Buffer – 1.5ml
- Quencher Solution – 1.5ml
- Reaction protocol
The gold nanoparticles in this kit are supplied as a lyophilized (freeze-dried) mixture. The conjugation reaction is initiated by simply reconstituting the freeze-dried nanoparticles with the protein of interest, which attaches to the nanoparticle surface via lysine residues.
The gold conjugation procedure has a quick hands-on time of around 10 minutes, and the conjugate is fully ready for use within 3 hr. Researchers only need to pipette the biomolecule into a vial containing the nanoparticles, quench the reaction, and perform product washing through microcentrifugation.
The provided protocol is optimized for highly efficient covalent conjugation, resulting in stable gold nanoparticle conjugates. Optional protocol steps involve additional materials, such as 10% aqueous BSA (126615) and Tris saline resuspension buffer (PPB002), which are sold separately.
Application
This gold conjugation kit streamlines the process of conjugating your proteins or biomolecules to 50 nm gold nanoparticles. Gold conjugation helps researchers to visualize and assay a specific protein or antibody of interest. Gold conjugates are useful in a wide range of applications like lateral flow testing, immunoblotting, immuno-electron microscopy, immunohistochemical staining, and other bio-assays.
Different sizes of gold nanoparticles perform better in specific applications. For lateral flow and flow cytometry, we recommend using gold nanoparticles with diameters between 20 nm and 100 nm. For immunoblotting or immuno-electron microscopy, the optimal range is 5 nm to 40 nm. For bioassays utilizing dynamic light scattering, gold nanoparticles with diameters ranging from 60 nm to 100 nm are suggested.
Features and Benefits
- The resulting covalent conjugates offer greater stability compared to those prepared using passive adsorption methods.
- Fast and convenient conjugation reaction with no need for pre-activation.
- A spacer between the gold nanoparticle surface and the conjugated ligand minimizes the impact on the tertiary protein structure. This reduces the likelihood of poor performing conjugates, a common issue encountered with conjugates prepared by passive adsorption.
- Gold surface coating is precisely engineered to minimize non-specific protein binding in biological assays.
Legal Information
Product of CytoDiagnostics, Inc.
Brilliance Bacillus Cereus Selective Supplement
RM547.00Brand:
Thermo ScientificTM OxoidTM
- Brilliance is a chromogenic medium for the isolation and differentiation of Bacillus cereus in food samples.
- Add to Brilliance Bacillus Cereus Agar Base, Part No. CM1036A and CM1036B. Each vial supplements 500mL of medium.
Brilliance Bacillus Cereus Selective Supplement, Oxoid Composition
| Vial contents (each vial is sufficient for 500ml of medium) |
per vial
|
per litre
|
| Polymyxin B |
53,000IU |
106,000IU |
| Trimethoprim |
5.0mg |
10.0mg |
Brilliance Bacillus Cereus Agar, Oxoid Preparation:
Suspend 20.5g in 500ml of distilled water. Mix well and bring to the boil to dissolve completely. Sterilize by autoclaving at 121°C for 15 minutes. Cool the medium to 50°C and aseptically add 1 vial of Brilliance Bacillus cereus Selective Supplement. Mix well and pour into sterile Petri dishes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Brilliance Bacillus cereus Selective Supplement must be stored at 2-8°C.
Store the prepared medium for up to 2 weeks at 2-8°C.
Legionella BMPA-α Selective Supplement 1X10 Vials
RM0.00Brand:
Thermo ScientificTM OxoidTM
Thermo Scientific™ Oxoid Legionella BMPA-α Selective Supplement is a selective supplement for the isolation of legionellae when used with Legionella BCYE Growth Supplement (SR0010) and Legionella CYE Agar Base (CM0655).
Legionella BMPA-α Selective Supplement, Oxoid Composition
| Vial contents |
SR0111E |
per litre |
| Cefamandole |
400µg |
4.0mg |
| Polymyxin |
8,000IU |
80,000IU |
| Anisomycin |
8.0mg |
80.0mg |
Legionella BMPA-α Selective Medium Preparation:
Reconstitute one vial SR0111E per 100ml medium as directed. Aseptically add the vial contents to BCYE-a Medium prepared from Legionella CYE Agar Base (CM0655) and Legionella BCYE Supplement (SR0110) and cooled to 50°C. Mix well and pour into sterile Petri dishes.
PEDOT:PSS, high-conductivity grade, 1.5% aqueous dispersion, neutral pH – Sigma-Aldrich
RM2,115.00Brand:
Sigma-Aldrich
Synonyms
Orgacon™ N-1005, PEDOT:PSS, Poly(2,3-dihydrothieno-1,4-dioxin)-poly(styrenesulfonate)
CAS No
–
General Description
Aqueous surfactant-free dispersion of PEDOT:PSS neutralized to pH >5. Suitable for preparation of pH-neutral transparent conductive films printed electronics applications (e.g. hole injection layers). A conducting polymer such as poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate) anions (PEDOT/PSS) is widely used in various organic optoelectronic devices. PEDOT: PSS is a blend of cationic polythiopene derivative, doped with a polyanion. High electrical conductivity and good oxidation resistance of such polymers make it suitable for electromagnetic shielding and noise suppression. Thus, the polymer film was found to possess high transparency throughout the visible light spectrum and even into near IR and near UV regions, virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Impact of small electric and magnetic fields on the polymer was studied.
Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) is a conductive polymer that is formed by electropolymerizing 3,4-ethylenedioxythiophene in a solution of poly(styrenesulfonate) (PSS). PEDOT is doped with positive ions and PSS with negative ions. PEDOT:PSS is majorly used in organic electronics due to the properties such as:
- low band gap
- good optical properties
- high conductivity
- low redox potential
- easy processing
- tunable film forming ability
We are committed to bringing you Greener Alternative Products, which adhere to one or more of the 12 Principles of Green Chemistry. This product is used in energy conversion and storage, thus has been enhanced for energy efficiency. Click here for more information.
Applications
PEDOT:PSS can be used as an electrode material that forms a layered structure with a high mobility for charge carriers. It can be used for a wide range of energy based applications, such as organic photovoltaics (OPVs), dye sensitized solar cells (DSSCs), organic light emitting diodes (OLEDs) and supercapacitors.
Virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend.
Features & Benefits
Reduced mean particle size with a tighter distribution of sizes allows for the creation of a smooth surface on the ITO electrode, and so electric “shorts” in LED devices can be reduced. Greatly reduced inherent conductivity reduces the occurrence of “cross-talk” in very small pixel (less than 10 micron) matrix array displays.
Legal Information
Product of Agfa
Orgacon is a trademark of Agfa-Gevaert N.V.
Ceftriaxone 32 M.I.C.E. (50 Pack)
RM0.00Brand:
Thermo ScientificTM OxoidTM
**This product is not available at the moment.
Effortlessly establish accurate Minimum Inhibitory Concentration (MIC) values manually using Thermo Scientific™ Oxoid™ Ceftriaxone M.I.C.Evaluator Strips (M.I.C.E.™).
C30 Chloramphenicol
RM0.00Brand:
Thermo ScientificTM OxoidTM
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM152.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
Price range: RM395.00 through RM627.00Brand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
OEM SeaKem® LE Agarose
RM1,514.00Brand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
Applications
Content & Storage
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Brand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available
FEATURED PRODUCTS
KAA Agar Base 500g
RM843.00Brand:
Thermo ScientificTM OxoidTM
- Oxoid Kanamycin Aesculin Azide Agar Base is a selective medium for the isolation of Enterococci in foodstuffs.
- Also available Kanamycin Sulphate Selective Supplement, Part No. SR0092E.
Kanamycin Aesculin Azide Agar Base, Oxoid Composition
| Typical Formula* |
gm/litre |
| Tryptone |
18.8 |
| Yeast extract |
5.0 |
| Sodium chloride |
5.0 |
| Sodium citrate |
1.0 |
| Aesculin |
1.0 |
| Ferric ammonium citrate |
0.5 |
| Sodium azide |
0.15 |
| Starch | 0.6 |
| Mix for Streptococci | 0.6 |
| Agar | 10.0 |
| Final pH 7.0 ± 0.2 @ 25°C |
Kanamycin Aesculin Azide Agar, Oxoid Preparation:
Suspend 21.3g in 500ml of distilled water. Add one vial of Kanamycin Supplement (SR0092) reconstituted as directed. Bring to the boil. Sterilise by autoclaving at 121°C for 15 minutes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared media at 2-8°C.
Precautions
Observe the hazard precautions regarding sodium azide when disposing of the medium.
There is no universal medium which will isolate all strains of enterococci.
Unless a presumptive count is acceptable all isolates should have their identity confirmed with further tests.
CCDA Selective Supplement 1 x 10 Vials
RM855.00Brand:
Thermo ScientificTM OxoidTM
Oxoid CCDA Selective Supplement is used for the isolation of Campylobacter spp., especially C. upsaliensis or Arcobacter.
- For the isolation of Arcobacter spp., add to Arcobacter Broth Base, Part No. CM0965B
- For the isolation of Campylobacter spp., especially C. upsaliensis, add to Campylobacter Blood-Free Selective Agar Base (CCDA Preston), Part No. CM0739B
CCDA Selective Supplement, Oxoid Composition
| Vial contents (each vial is sufficient for 500ml of medium) |
per vial
|
per litre
|
| Cefoperazone |
16mg |
32mg
|
| Amphotericin B |
5mg |
10mg
|
Campylobacter Blood-Free Selective Agar, Oxoid Preparation:
Suspend 22.75g of Campylobacter Blood-Free Selective Agar Base in 500ml of distilled water and bring to the boil to dissolve. Sterilise by autoclaving at 121°C for 15 minutes. Cool to 50°C. Aseptically add 1 vial of CCDA Selective Supplement SR0155 reconstituted as directed. Mix well and pour into sterile Petri dishes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the selective supplement in the dark at 2-8°C and use before the expiry date on the label.
The prepared medium may be stored for up to 2 weeks at 2-8°C .
Brilliance™ UTI 500g
RM0.00Brand:
Thermo ScientificTM OxoidTM
Thermo Scientific™ Oxoid Brilliance™ UTI Agar (formerly Chomogenic UTI Agar ) is a chromogenic medium for the presumptive identification and differentiation of all the main micro-organisms that cause urinary tract infections (UTIs).
Brilliance UTI Agar, Oxoid Composition
| Typical Formula* |
gm/litre |
| Peptone |
15.0 |
| Chromogenic mix |
26.3 |
| Agar |
15.0 |
| Final pH 6.8 ± 0.2 @ 25°C |
Brilliance UTI Agar, Oxoid Preparation:
Suspend 56.3g of Brilliance UTI Agar in 1 litre of distilled water, mix well and sterilise by autoclaving at 121°C for 15 minutes. Cool to 50°C and mix well before pouring plates.
Storage conditions and Shelf life
Dehydrated Brilliance UTI Agar must be stored tightly capped in the original container at 10-30ºC.
Oxoid Brilliance UTI Agar plates should be stored in the original packaging, at the temperature stated on the pack or product specification, and protected from direct light.
When stored as directed, the unopened product will remain stable until the expiry date on the label. Locally prepared media can be stored for up to 2 weeks when made from CM0949 according to the manufacturer’s instructions and stored at 2-8ºC, in the dark. A longer shelf life may be attainable, but should be validated under the relevant, local manufacturing and storage conditions.
Buffered oxide etchant (BOE) 10:1 – Sigma-Aldrich
RM660.00Brand:
Sigma-Aldrich
Synonyms
BHF, Buffered HF
Cas No.
–
General Descriptions
Buffered oxide etchant (BOE) is a wet etchant used in microfabrication. Its primary use is in etching thin films of silicon dioxide (SiO2) or silicon nitride (Si3N4). It is a mixture of a buffering agent, such as ammonium fluoride (NH4F), and hydrofluoric acid (HF). Concentrated HF etches silicon dioxide too quickly for good process control and also peels the photoresist used in lithographic patterning.
Application
Buffered oxide etchant (BOE) 10:1 can be used in the etching of titanium carbide, which can be used in microelectromechanical systems (MEMS). It can also be used in the etching of spin-on-dopant (SOD) for the development of conductor-insulator-conductor tunnelling diodes. It can also be used to enhance the surface of fused quartz devices.
Clostridium Difficile Selective Supplement 1 x 10 Vials
RM1,673.00Brand:
Thermo ScientificTM OxoidTM
- Oxoid Clostridium Difficile Selective Supplement is added to Clostridium Difficile Agar Base, Part No. CM0601B.
- Each vial supplements 500mL of medium.
Clostridium Difficile Selective Supplement, Oxoid Composition
| Vial contents (each vial is sufficient for 500mls of medium) |
per vial
|
per litre
|
| D-cycloserine |
125.0mg
|
250.0mg |
| Cefoxitin |
4.0mg
|
8.0mg |
Clostridium Difficile Agar, Oxoid Preparation:
Suspend 34.5g in 500ml of distilled water and bring gently to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes. Allow to cool to 50°C and add aseptically the contents of 1 vial of Oxoid Clostridium Difficile Supplement (SR0096) reconstituted as directed, together with 7% (v/v) Defibrinated Horse Blood (SR0050). Sheep Blood (SR0051) may be used in place of Horse Blood but some strains of the organism will show a slightly reduced growth recovery. Mix well and pour into sterile Petri dishes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C no longer than 5-7 days.
Tinsdale Medium 500g
RM0.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Tinsdale Agar Base is used for the isolation and identification of Corynebacterium diphtheriae.
Tinsdale Agar Base, Oxoid Composition
| Typical Formula* |
gm/litre
|
| Proteose peptone |
20.0 |
| Yeast extract |
5.0 |
| Sodium chloride |
5.0 |
| L-cystine |
0.24 |
| Agar |
15.0
|
| pH 7.9 ± 0.2 @ 25°C |
Tinsdale Agar, Oxoid Preparation:
Suspend 9g of agar base in 200ml of distilled water. Bring to the boil and dissolve completely. DO NOT AUTOCLAVE. Allow to cool to approximately 50°C and add the contents of one vial of Oxoid Tinsdale Supplement SR0065 reconstiuted as directed. Mix throughly and pour into sterile Petri dishes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C for not more than 4 days.
Precautions
Further tests must be carried out on colonies suspected as Corynebacterium diphtheriae, including cell morphology after sub-culture to Loeffler’s Medium and examination for toxin production.
Do not incubate Tinsdale’s Agar plates in enhanced CO2 atmosphere (5-10% v/v).
N,N-Dimethylacetamide, ReagentPlus®, 99% (Sigma-Aldrich)
RM843.00Brand:
Sigma-Aldrich
General Description
CAS number: 127-19-5
Chemical Formula: CH3CON(CH3)2
Molar Mass: 87.12 g/mol
50 bp DNA Ladder, NEB
Brand:
New England Biolabs
This product is available in our Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
- Size range: 50 bp – 1350 bp
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025)
- Easy-to-identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
PEDOT:PSS, high-conductivity grade, 3.0-4.0% aqueous dispersion – Sigma-Aldrich
Price range: RM297.00 through RM1,187.00Brand:
Sigma-Aldrich
Synonyms
PEDOT:PSS, Poly(2,3-dihydrothieno-1,4-dioxin)-poly(styrenesulfonate)
CAS No
–
General Description
Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) is an organic semiconductor prepared by doping cationic poly(3,4-ethylenedioxythiophene) and poly(4-styrenesulfonate) anion. Its high electrical conductivity and good oxidation resistance make it suitable for electromagnetic shielding and noise suppression. PEDOT:PSS based polymeric films have a high transparency throughout the visible light spectrum and even in near IR and near UV regions, with virtually 100% absorption from 900-2000 nm. PEDOT provides the conduction properties and PSS forms a hydrated colloidal solution.
We are committed to bringing you Greener Alternative Products, which adhere to one or more of the 12 Principles of Green Chemistry. This product is used in energy conversion and storage, thus has been enhanced for energy efficiency. Click here for more information.
Applications
Electrical conductivity measurements herewith reported were on a film deposited by spin-coating on a clean glass, then dried (130 °C for 15 minutes on a hotplate). The layer thickness was determined by scratching the layer and measuring the profile/height of the scratch by a stylus profilometer. Electrodes for the measurement were by evaporating metal contacts (four-point probes).
PEDOT:PSS is an intrinsically conductive polymer (ICP) that can be coated on various substrates and nanostructures like fullerenes (C60) to form composites with high electrochemical properties for applications like low-cost printed electronics, optoelectronics, and polymeric solar cells. It can be used as a conductive hydrogel with polyethylene glycol-diacrylate (PEG-DA) for potential applications in tissue engineering. PEDOT:PSS also finds use in other organic electronic applications like organic thin film transistors (OTFTs) and dye sensitized solar cells (DSSCs).
Ready-to-use high conductivity coating formulation.
Virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend.
Packaging
Packaged in poly bottles
E10 Erythromycin
RM0.00Brand:
Thermo ScientificTM OxoidTM
Gentamycin 1024 M.I.C.E. (10 Pack)
RM0.00Brand:
Thermo ScientificTM OxoidTM
**This product is not available at the moment.
Effortlessly establish accurate Minimum Inhibitory Concentration (MIC) values manually using Thermo Scientific™ Oxoid™ Gentamycin M.I.C.Evaluator Strips (M.I.C.E.™).
Tryptone Soya Broth (acc. to EP/USP)
RM336.00Brand:
Thermo ScientificTM OxoidTM
Thermo Scientific™ Oxoid Tryptone Soya Broth is tested according to EP/USP.
Tryptone Soya Broth, Oxoid Composition
| Formula |
gm/litre |
| Pancreatic digest of casein |
17.0 |
| Enzymatic digest of soya bean* |
3.0 |
| Sodium chloride |
5.0 |
| Dipotassium hydrogen phosphate |
2.5 |
| Glucose |
2.5 |
| pH 7.3 ± 0.2 @ 25°C |
*Contains papain
Tryptone Soya Broth, Oxoid Preparation:
Add 30g to 1 litre of water (purified as required), mix well and distribute into final containers. Sterilise by autoclaving at 121°C for 15 minutes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium away form the light at room temperature.
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM152.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
Price range: RM395.00 through RM627.00Brand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
OEM SeaKem® LE Agarose
RM1,514.00Brand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
Applications
Content & Storage
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Brand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available
PRODUCT CATEGORIES
OUR BRANDS
DISTRIBUTION PARTNERS
LabMal is the online distribution of life science and biotechnology products, including microbiology, molecular biology, cell biology, general lab equipment, plastic consumables, chemical, cleansing solution and protein. If you are interested in the products from our distribution partners that are not available in Labmal, please contact us at 03-8051 5106 or info@labmal.com.
