LabMal specialises in online distribution of life science products & services, lab consumables and general lab equipment.
FEATURED PRODUCTS
R.P.F. Supplement, Oxoid
RM3,915.00Brand:
Thermo ScientificTM OxoidTM
Oxoid RPF Supplement (Rabbit Plasma Fibrinogen) is used for the isolation and enumeration of coagulase positive staphylococci from food.
- Use only with Baird-Parker Agar Base, RPF, Part No. CM0961B
- Each vial supplements 100mL of medium
RPF Supplement (Rabbit Plasma Fibrinogen), Oxoid Composition
| Vial contents (each vial is sufficient for 100ml of medium) | |
| Fibrinogen |
0.375 g |
| Rabbit plasma |
2.5 ml |
| Trypsin inhibitor |
2.5 mg |
| Potassium tellurite |
2.5 mg |
RPF Supplement Medium Preparation:
Reconstitute one vial as directed, aseptically add the contents to 90 ml of sterile Baird-Parker Agar Base (RPF) CM0961 cooled to 48°C. Mix well and use immediately.
Precautions
Colonies of some contaminating organisms growing in close proximity to the coagulase positive colonies may partially digest the coagulase halo reaction.
CampyGen Compact 20/Pck
RM272.00Brand:
Thermo ScientificTM OxoidTM
- Produce suitable gaseous atmosphere for growth of microaerophilic microorganisms with the Oxoid CampyGen Compact Sachet.
- For use in Compact Plastic Pouch.
- Each pouch holds 2 standard size petri dishes.
- No water or catalyst required.
- No hydrogen gas produced.
- Use with Compact Plastic Pouch Part No. AG0020C and AnaeroGen™ Compact Sealing Clip, Part No. AN0005C.
Precautions
This product is for in vitro use only
As soon as the CampyGen paper sachet is exposed to air, the reaction will start. It is therefore essential that the paper sachet is placed in the jar and the jar sealed within one minute.
The reaction of the ascorbic acid with oxygen is exothermic. However, the temperature of the CampyGen paper sachet will not exceed 65°C.
Storage
Store at 2-25°C. Under these conditions, the CampyGen sachets will retain their reactivity until the expiry date given on the outer box and on the foil sachet.
Water Plate Count Agar (ISO) 500g
RM919.00Brand:
Thermo ScientificTM OxoidTM
Numerate all culturable microorganisms from water using colony count technique with Thermo Scientific™ Oxoid™ Water Plate Count Agar (Dehydrated). This nutritious, non-selective medium conforms to ISO 6222: 1999 (E) Water quality ― Enumeration of culturable microorganisms ― Colony count by inoculation in a nutrient agar culture medium1.
Water Plate Count Agar (Dehydrated), Oxoid Composition
| Typical Formula* |
gm/litre |
| Tryptone |
6.0 |
| Yeast Extract |
3.0 |
| Agar |
15.0 |
| pH 7.2 ± 0.2 @ 25°C |
|
Water Plate Count Agar (Dehydrated), Oxoid Preparation:
Suspend 24g of Water Plate Count Agar (ISO) in 1 litre of distilled water and bring gently to the boil to dissolve. If desired, distribute volumes of 15ml to 20ml in tubes, bottles or other containers. Sterilise by autoclaving at 121°C for 15 minutes. After sterilisation, allow to cool and maintain at 45 ± 1°C using a water bath.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared plates of medium at 2-8°C.
Tris-(8-hydroxyquinoline)aluminum, 98% trace metals basis – Sigma-Aldrich
RM841.00Brand:
Sigma-Aldrich
Synonyms
8-Hydroxyquinoline aluminum salt, Alq3, Aluminum 8-hydroxyquinolinate, Aluminum oxinate, Tris-(8-hydroxyquinolinato)aluminum
Cas No.
2085-33-8
Application
Key green-light emitting and electron transport material for OLEDs.
OLED Device Performance
ITO/MoO3/NPD/Alq3/BPhen/LiF/Al
Color: green
Max. Luminance: 20000 Cd/m2
Max. EQE: 1.2 %
Turn-On Voltage: 2.8 V
ITO/NPD/CBP:Ir(ppy)3/BCP/Alq3/Mg:Al
Color: green
Max. Luminance: 100000 Cd/m2
Max. EQE: 8 %
Turn-On Voltage: 4.3 V
ITO/NPD/TCTA/BCPO:Ir(piq)3 (7-8%)/BCP/Alq3/LiF/Al
Color: red
Max. Luminance: 24529 Cd/m2
Max. EQE: 17 %
Turn-On Voltage: 2.7 V
ITO/NPD/TCTA/BCPO:Ir(ppy)3 (7-8%)/BCP/Alq3/LiF/Al
Color: green
Max. Luminance: 207839 Cd/m2
Max. EQE: 21.6 %
Turn-On Voltage: 2.1 V
ITO/m-MTDATA/NPD/TTPhPhB/Alq3/LiF/Al
Color: blue
Max. Luminance: 9100 Cd/m2
Max. EQE: 2.5 %
Turn-On Voltage: 3.2 V
Neomycin Selective Supplement 1 x 10 Vials
RM849.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Neomycin Selective Supplement (150mg/vial) allows the growth of clostridia and other anaerobes.
- Add to Blood Agar, Wilkins-Chalgren Anaerobe Agar, Part No. CM0619B, or Columbia Blood Agar, Part No. CM0331B
- Each vial supplements 2L of medium
Neomycin Selective Supplement, Oxoid Composition
| Vial contents (each vial is sufficient for 2 litres of medium) | |
| Neomycin |
150.0 mg |
Neomycin Selective Medium Preparation:
Reconstitute one vial as directed, aseptically add the contents to 2 litres of Wilkins Chalgren Agar Base CM0619 or another appropriate medium cooled to approximately 50° C. Mix well and pour into sterile Petri dishes.
One Broth-Salmonella Supplement 10x225ML
RM176.00Brand:
Thermo ScientificTM OxoidTM
Thermo Scientific™ Oxoid™ ONE Broth-Salmonella Supplement is for the selective enrichment of Salmonella spp. from food samples in 24 hours in a single enrichment step.
- Add to ONE Broth-Salmonella Part No. CM1091B
- Each vial supplements 500mL of medium
ONE Broth Salmonella Selective Supplement, Oxoid Composition
| Vial Contents (each vial is sufficient for 500ml of medium) |
per vial |
per litre |
| Novobiocin |
2.7mg |
12mg |
ONE Broth Salmonella Selective Medium Preparation:
Suspend 5.6g of ONE Broth-Salmonella Base in 225ml of distilled water. Sterilize by autoclaving at 121°C for 15 minutes. Cool to below 50°C and add the contents of 1 vial of ONE Broth-Salmonella Supplement (SR0242), resuspended as directed.
Storage conditions and Shelf life
The ONE Broth-Salmonella Selective Supplement should be stored in the dark at 2-8ºC. When stored as directed, the unopened products will remain stable until the expiry date printed on the packaging.
Once prepared, ONE Broth-Salmonella can be stored for up to 2 weeks when made from CM1091 and SR0242 according to the manufacturer’s instructions and stored at 2-8ºC, in the dark. A longer shelf life may be attainable, but should be validated under the relevant, local manufacturing and storage conditions.
Gelatin Porcine Skin 90-110 Bloom
RM328.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Gelatin Bacteriological is a special bacteriological grade readily soluble in water to give a clear solution free from sulphite and preservatives.
- Firm gel obtained from 15% solution
Blank Antimicrobial
RM0.00Brand:
Thermo ScientificTM OxoidTM
Cfp30 Cefoperazone
RM0.00Brand:
Thermo ScientificTM OxoidTM
Lithium cobalt oxide, 99.8% trace metals basis – Sigma-Aldrich
RM1,079.00Brand:
Sigma-Aldrich
Synonyms
LCO, Lithium cobalt(III) oxide, Lithium cobaltite
General Description
Lithium cobalt(III) oxide is a class of electrode material that can be used in the fabrication of lithium-ion batteries. Lithium-ion batteries consist of anode, cathode, and electrolyte with a charge-discharge cycle. These materials enable the formation of greener and sustainable batteries for electrical energy storage.
We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product has been enhanced for energy efficiency. Find details here.
Applications
Critical substance in the quest for high performance, advanced batteries.
Lithium cobalt(III) oxide (LiCoO2) can be used as a cathode material with a specific capacity of ~274 mAhg−1 for the fabrication of lithium-ion batteries. Commercially, these LiCoO2 fabricated Li-ion batteries can be used in a majority of smartphones. LiCoO2 can also be used in the formation of fuel cells.
Anti-phospho Histone H2A.X (Ser139), clone JBW301, Alexa Fluor® 647 Conjugate
RM2,663.00Brand:
Merck
Description
As a member of the histone H2A family, histone H2A.x (H2A.x) is a variant histone H2A which replaces conventional H2A in a subset of nucleosomes. H2A.x is involved in the DNA repair of double-strand breakage (DSB) damage on nuclear DNA. After a double strand DNA break, H2A.x is rapidly phosphorylated at serine 139 by ATM kinase and becomes gamma-H2AFX. This phosphorylation step can extend up to several thousand nucleosomes from the actual site of the DSB and may mark the surrounding chromatin for recruitment of proteins required for DNA damage signaling and repair. As a part of posttranslational modifications during apoptosis caused by severe DNA damage, high expression of phosphorylated H2A.x is considered as an accurate indicator of apoptosis.
Amies Transport Medium 250g
RM0.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Amies Transport Medium is used for the preservation of microorganisms in transit.
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM152.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
Price range: RM424.00 through RM673.00Brand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
OEM SeaKem® LE Agarose
RM1,514.00Brand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
Applications
Content & Storage
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Brand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available
FEATURED PRODUCTS
R.P.F. Supplement, Oxoid
RM3,915.00Brand:
Thermo ScientificTM OxoidTM
Oxoid RPF Supplement (Rabbit Plasma Fibrinogen) is used for the isolation and enumeration of coagulase positive staphylococci from food.
- Use only with Baird-Parker Agar Base, RPF, Part No. CM0961B
- Each vial supplements 100mL of medium
RPF Supplement (Rabbit Plasma Fibrinogen), Oxoid Composition
| Vial contents (each vial is sufficient for 100ml of medium) | |
| Fibrinogen |
0.375 g |
| Rabbit plasma |
2.5 ml |
| Trypsin inhibitor |
2.5 mg |
| Potassium tellurite |
2.5 mg |
RPF Supplement Medium Preparation:
Reconstitute one vial as directed, aseptically add the contents to 90 ml of sterile Baird-Parker Agar Base (RPF) CM0961 cooled to 48°C. Mix well and use immediately.
Precautions
Colonies of some contaminating organisms growing in close proximity to the coagulase positive colonies may partially digest the coagulase halo reaction.
CampyGen Compact 20/Pck
RM272.00Brand:
Thermo ScientificTM OxoidTM
- Produce suitable gaseous atmosphere for growth of microaerophilic microorganisms with the Oxoid CampyGen Compact Sachet.
- For use in Compact Plastic Pouch.
- Each pouch holds 2 standard size petri dishes.
- No water or catalyst required.
- No hydrogen gas produced.
- Use with Compact Plastic Pouch Part No. AG0020C and AnaeroGen™ Compact Sealing Clip, Part No. AN0005C.
Precautions
This product is for in vitro use only
As soon as the CampyGen paper sachet is exposed to air, the reaction will start. It is therefore essential that the paper sachet is placed in the jar and the jar sealed within one minute.
The reaction of the ascorbic acid with oxygen is exothermic. However, the temperature of the CampyGen paper sachet will not exceed 65°C.
Storage
Store at 2-25°C. Under these conditions, the CampyGen sachets will retain their reactivity until the expiry date given on the outer box and on the foil sachet.
Water Plate Count Agar (ISO) 500g
RM919.00Brand:
Thermo ScientificTM OxoidTM
Numerate all culturable microorganisms from water using colony count technique with Thermo Scientific™ Oxoid™ Water Plate Count Agar (Dehydrated). This nutritious, non-selective medium conforms to ISO 6222: 1999 (E) Water quality ― Enumeration of culturable microorganisms ― Colony count by inoculation in a nutrient agar culture medium1.
Water Plate Count Agar (Dehydrated), Oxoid Composition
| Typical Formula* |
gm/litre |
| Tryptone |
6.0 |
| Yeast Extract |
3.0 |
| Agar |
15.0 |
| pH 7.2 ± 0.2 @ 25°C |
|
Water Plate Count Agar (Dehydrated), Oxoid Preparation:
Suspend 24g of Water Plate Count Agar (ISO) in 1 litre of distilled water and bring gently to the boil to dissolve. If desired, distribute volumes of 15ml to 20ml in tubes, bottles or other containers. Sterilise by autoclaving at 121°C for 15 minutes. After sterilisation, allow to cool and maintain at 45 ± 1°C using a water bath.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared plates of medium at 2-8°C.
Tris-(8-hydroxyquinoline)aluminum, 98% trace metals basis – Sigma-Aldrich
RM841.00Brand:
Sigma-Aldrich
Synonyms
8-Hydroxyquinoline aluminum salt, Alq3, Aluminum 8-hydroxyquinolinate, Aluminum oxinate, Tris-(8-hydroxyquinolinato)aluminum
Cas No.
2085-33-8
Application
Key green-light emitting and electron transport material for OLEDs.
OLED Device Performance
ITO/MoO3/NPD/Alq3/BPhen/LiF/Al
Color: green
Max. Luminance: 20000 Cd/m2
Max. EQE: 1.2 %
Turn-On Voltage: 2.8 V
ITO/NPD/CBP:Ir(ppy)3/BCP/Alq3/Mg:Al
Color: green
Max. Luminance: 100000 Cd/m2
Max. EQE: 8 %
Turn-On Voltage: 4.3 V
ITO/NPD/TCTA/BCPO:Ir(piq)3 (7-8%)/BCP/Alq3/LiF/Al
Color: red
Max. Luminance: 24529 Cd/m2
Max. EQE: 17 %
Turn-On Voltage: 2.7 V
ITO/NPD/TCTA/BCPO:Ir(ppy)3 (7-8%)/BCP/Alq3/LiF/Al
Color: green
Max. Luminance: 207839 Cd/m2
Max. EQE: 21.6 %
Turn-On Voltage: 2.1 V
ITO/m-MTDATA/NPD/TTPhPhB/Alq3/LiF/Al
Color: blue
Max. Luminance: 9100 Cd/m2
Max. EQE: 2.5 %
Turn-On Voltage: 3.2 V
Neomycin Selective Supplement 1 x 10 Vials
RM849.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Neomycin Selective Supplement (150mg/vial) allows the growth of clostridia and other anaerobes.
- Add to Blood Agar, Wilkins-Chalgren Anaerobe Agar, Part No. CM0619B, or Columbia Blood Agar, Part No. CM0331B
- Each vial supplements 2L of medium
Neomycin Selective Supplement, Oxoid Composition
| Vial contents (each vial is sufficient for 2 litres of medium) | |
| Neomycin |
150.0 mg |
Neomycin Selective Medium Preparation:
Reconstitute one vial as directed, aseptically add the contents to 2 litres of Wilkins Chalgren Agar Base CM0619 or another appropriate medium cooled to approximately 50° C. Mix well and pour into sterile Petri dishes.
One Broth-Salmonella Supplement 10x225ML
RM176.00Brand:
Thermo ScientificTM OxoidTM
Thermo Scientific™ Oxoid™ ONE Broth-Salmonella Supplement is for the selective enrichment of Salmonella spp. from food samples in 24 hours in a single enrichment step.
- Add to ONE Broth-Salmonella Part No. CM1091B
- Each vial supplements 500mL of medium
ONE Broth Salmonella Selective Supplement, Oxoid Composition
| Vial Contents (each vial is sufficient for 500ml of medium) |
per vial |
per litre |
| Novobiocin |
2.7mg |
12mg |
ONE Broth Salmonella Selective Medium Preparation:
Suspend 5.6g of ONE Broth-Salmonella Base in 225ml of distilled water. Sterilize by autoclaving at 121°C for 15 minutes. Cool to below 50°C and add the contents of 1 vial of ONE Broth-Salmonella Supplement (SR0242), resuspended as directed.
Storage conditions and Shelf life
The ONE Broth-Salmonella Selective Supplement should be stored in the dark at 2-8ºC. When stored as directed, the unopened products will remain stable until the expiry date printed on the packaging.
Once prepared, ONE Broth-Salmonella can be stored for up to 2 weeks when made from CM1091 and SR0242 according to the manufacturer’s instructions and stored at 2-8ºC, in the dark. A longer shelf life may be attainable, but should be validated under the relevant, local manufacturing and storage conditions.
Gelatin Porcine Skin 90-110 Bloom
RM328.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Gelatin Bacteriological is a special bacteriological grade readily soluble in water to give a clear solution free from sulphite and preservatives.
- Firm gel obtained from 15% solution
Blank Antimicrobial
RM0.00Brand:
Thermo ScientificTM OxoidTM
Cfp30 Cefoperazone
RM0.00Brand:
Thermo ScientificTM OxoidTM
Lithium cobalt oxide, 99.8% trace metals basis – Sigma-Aldrich
RM1,079.00Brand:
Sigma-Aldrich
Synonyms
LCO, Lithium cobalt(III) oxide, Lithium cobaltite
General Description
Lithium cobalt(III) oxide is a class of electrode material that can be used in the fabrication of lithium-ion batteries. Lithium-ion batteries consist of anode, cathode, and electrolyte with a charge-discharge cycle. These materials enable the formation of greener and sustainable batteries for electrical energy storage.
We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product has been enhanced for energy efficiency. Find details here.
Applications
Critical substance in the quest for high performance, advanced batteries.
Lithium cobalt(III) oxide (LiCoO2) can be used as a cathode material with a specific capacity of ~274 mAhg−1 for the fabrication of lithium-ion batteries. Commercially, these LiCoO2 fabricated Li-ion batteries can be used in a majority of smartphones. LiCoO2 can also be used in the formation of fuel cells.
Anti-phospho Histone H2A.X (Ser139), clone JBW301, Alexa Fluor® 647 Conjugate
RM2,663.00Brand:
Merck
Description
As a member of the histone H2A family, histone H2A.x (H2A.x) is a variant histone H2A which replaces conventional H2A in a subset of nucleosomes. H2A.x is involved in the DNA repair of double-strand breakage (DSB) damage on nuclear DNA. After a double strand DNA break, H2A.x is rapidly phosphorylated at serine 139 by ATM kinase and becomes gamma-H2AFX. This phosphorylation step can extend up to several thousand nucleosomes from the actual site of the DSB and may mark the surrounding chromatin for recruitment of proteins required for DNA damage signaling and repair. As a part of posttranslational modifications during apoptosis caused by severe DNA damage, high expression of phosphorylated H2A.x is considered as an accurate indicator of apoptosis.
Amies Transport Medium 250g
RM0.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Amies Transport Medium is used for the preservation of microorganisms in transit.
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM152.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
Price range: RM424.00 through RM673.00Brand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
OEM SeaKem® LE Agarose
RM1,514.00Brand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
Applications
Content & Storage
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Brand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available
PRODUCT CATEGORIES
OUR BRANDS
DISTRIBUTION PARTNERS
LabMal is the online distribution of life science and biotechnology products, including microbiology, molecular biology, cell biology, general lab equipment, plastic consumables, chemical, cleansing solution and protein. If you are interested in the products from our distribution partners that are not available in Labmal, please contact us at 03-8051 5106 or info@labmal.com.
