LabMal specialises in online distribution of life science products & services, lab consumables and general lab equipment.
FEATURED PRODUCTS
Maximum Recovery Diluent 500g
RM231.00Brand:
Thermo ScientificTM OxoidTM
Achieve maximum recovery of microorganisms during dilution with this protective, isotonic Thermo Scientific™ Oxoid™ Maximum Recovery Diluent (Dehydrated).
Maximum Recovery Diluent combines the protective effect of peptone in the diluting solution1 with the osmotic support of physiological saline. The low peptone concentration in the diluent reduces organism multiplication in the sample for at least 45 minutes during the dilution stage.
Maximum Recovery Diluent, Oxoid Composition
| Typical Formula* |
gm/litre |
| Peptone |
1.0 |
| Sodium chloride |
8.5 |
| pH 7.0 ± 0.2 @ 25°C |
Maximum Recovery Diluent, Oxoid Preparation:
Dissolve 9.5g in 1 litre of distilled water. Dispense into the final containers and sterilise by autoclaving at 121°C for 15 minutes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at room temperature.
N30 Neomycin
RM0.00Brand:
Thermo ScientificTM OxoidTM
Tryptone Soya Agar 500g, Oxoid
RM291.00Brand:
Thermo ScientificTM OxoidTM
Tryptone Soya Agar, Oxoid (dehydrated) is suitable to grow a wide variety of microorganisms. It’s a general-purpose agar medium containing two peptones, which supports the growth of both aerobes and anaerobes, the latter being grown either in deep cultures or by incubation under anaerobic conditions. Tryptone Soya Agar is recommended as a reference medium when testing selective media to measure the degree of inhibition.
| Typical Formula |
gm/litre
|
| Pancreatic digest of casein |
15.0 |
| Enzymatic* digest of soya bean |
5.0 |
| Sodium chloride |
5.0 |
| Agar |
15.0 |
| pH 7.3 ± 0.2 @ 25°C |
*Contains papain
Preparation of Tryptone Soya Agar, Oxoid
First, you add 40g of tryptone soya agar to 1 litre of distilled water (purified as required). You can boil to dissolve the powder completely. After dissolved, you can sterilise the medium by autoclaving at 121°C for 15 minutes.
Storage Condition and Shelf Life of Tryptone Soya Agar, Oxoid
You can store the dehydrated tryptone soya agar at 10-30°C and use before the expiry date on the label or store the prepared plates of a medium at 2-8°C.
(M-CP) Agar Base 500g
RM1,539.00Brand:
Thermo ScientificTM OxoidTM
- Oxoid Membrane Clostridium Perfringens Agar Base (m-CP Agar Base) is a chromogenic medium for rapid isolation and presumptive identification of Clostridium perfringens from water samples.
- Also available: Membrane Clostridium Perfringens Selective Supplement, Part No. SR0188E.
Membrane Clostridium Perfringens (M-CP) Agar Base, Oxoid Composition
| Typical Formula * |
gm/litre
|
| Tryptose |
30.0 |
| Yeast extract |
20.0 |
| Sucrose |
5.0 |
| L-cysteine hydrochloride |
1.0 |
| Magnesium sulphate.7H2O |
0.1 |
| Agar |
15.0 |
| Bromocresol purple |
0.04 |
| pH 7.6 ± 0.2 @ 25°C |
(M-CP) Agar Base, Oxoid Preparation:
Suspend 35.55g of m-CP Agar Base in 500ml of distilled water Mix well and sterilise by autoclaving at 121°C for 15 minutes. Cool to 50°C and aseptically add the contents of one vial of m-CP Selective Supplement reconstituted as directed. Aseptically add the following sterile solutions dissolved in distilled water:
| Component | Solution Strength | Volume (ml) |
| Phenolphthalein biphosphate tetrasodium salt |
0.5% |
10.0 |
| Ferric chloride hexahydrate |
4.5% |
1.0 |
| Indoxyl b-D-glucoside |
0.75% |
4.0 |
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Prepared medium may be stored for up to 5 days at 2-8°C in the dark.
Haemophilus Testing Medium 500g
RM599.00Brand:
Thermo ScientificTM OxoidTM
- Oxoid Haemophilus Test Medium Base (HTM) is used for the susceptibility testing of Haemophilus influenzae.
- Also available HTM Supplement, Part No. SR0158E. Store at -20° to 0°C.
Haemophilus Test Medium Base (HTM), Oxoid Composition
| Typical Formula* |
gm/litre |
| Mueller-Hinton Agar |
38.0 |
| Yeast extract (specifically selected for low antagonist levels) |
5.0 |
| pH 7.3 ± 0.1 @ 25°C |
Haemophilus Test Medium (HTM), Oxoid Preparation:
Suspend 21.5g of Haemophilus Test Medium Base in 500ml of distilled water. Bring to the boil to dissolve. Sterilise by autoclaving at 121° C for 15 minutes. Cool to 50°C and aseptically add the contents of 1 vial of Haemophilus Test Medium Supplement SR0158, as directed. Mix well and pour into sterile Petri dishes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared plates of medium at 2-8°C.
When stored as directed the supplement is stable until the expiry date stated on the label.
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
2-Propanol, for analysis EMSURE® ACS,ISO,Reag. Ph Eur (Merck)
Price range: RM62.00 through RM141.00Brand:
Merck
CAS no.: 67-63-0
Grade: ACS,ISO,Reag. Ph Eur
Chemical Formula: CH₃CH(OH)CH₃
Synonym: Isopropyl alcohol, Isopropanol, iso-Propanol, IPA
Quality level: MQ300
Nickel oxide Ni(II), 99.99% trace metals basis – Sigma-Aldrich
Price range: RM800.00 through RM3,064.00Brand:
Sigma-Aldrich
Synonyms
Nickel monoxide, Nickel(II) oxide, Nickelous oxide
Cas No.
1313-99-1
Application
Nickel(II) oxide can be used for a variety of sustainable applications such as:
non-enzymatic glucose sensor[1][2]
hydrogen production[3]
dye-sensitized solar cells (DSSCs)[4]
Malt Extract Broth 500g
RM325.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Malt Extract Broth is used for the identification of yeast and molds in sterility testing.
Malt Extract Broth, Oxoid Composition
| Typical Formula* |
gm/litre |
| Malt extract |
17.0 |
| Mycological peptone |
3.0 |
| pH 5.4 ± 0.2 |
|
Malt Extract Broth, Oxoid Preparation:
Add 20g to 1 litre of distilled water. Mix well, distribute into final containers and sterilise by autoclaving at 115°C for 10 minutes. This liquid medium is recommended for the cultivation of moulds and yeasts, during tests for sterility, etc.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
Luna Universal Probe One-Step RT-qPCR Kit
Brand:
New England Biolabs
Make a simpler choice
- One product per application simplifies selection
- Convenient master mix formats and user-friendly protocols simplify reaction setup
- Non-interfering, visible tracking dye helps to eliminate pipetting errors
Experience best-in-class performance
Optimize your RT-qPCR with Luna WarmStart® Reverse Transcriptase
Taq DNA Polymerase with Standard Taq Buffer, NEB
Brand:
New England Biolabs
Taq DNA Polymerase, NEB is a thermostable DNA polymerase that possesses 5′ to 3′ polymerase activity, that makes it an excellent industry standard for PCR.
Key features of Taq DNA Polymerase, NEB:
- Isolated from a recombinant source
- Robust and reliable reaction
- Incorporates dUTP, dITP and fluorescently -labeled nucleotides
- Ideal for routine PCR applications
- Exceptional value in terms of cost per unit
- Hot start version available
Taq DNA Polymerase, NEB is supplied with 10X Standard Taq Reaction Buffer, which is detergent-free and designed to be compatible with existing assay systems.
Lzd30 Linezolid
RM0.00Brand:
Thermo ScientificTM OxoidTM
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM152.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
Price range: RM395.00 through RM627.00Brand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
OEM SeaKem® LE Agarose
RM1,514.00Brand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
Applications
Content & Storage
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Brand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available
FEATURED PRODUCTS
PEDOT:PSS, conductive grade, 1.3 wt. % aqueous dispersion – Sigma-Aldrich
RM1,317.00Brand:
Sigma-Aldrich
Synonyms
PEDOT:PSS, Poly(2,3-dihydrothieno-1,4-dioxin)-poly(styrenesulfonate)
CAS No
–
General Description
A conducting polymer such as poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate) anions (PEDOT/PSS) is widely used in various organic optoelectronic devices. High electrical conductivity and good oxidation resistance of such polymers make it suitable for electromagnetic shielding and noise suppression. Thus, the polymer film was found to possess high transparency throughout the visible light spectrum and even into near IR and near UV regions, virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend. Impact of small electric and magnetic fields on the polymer was studied.
We are committed to bringing you Greener Alternative Products, which adhere to one or more of the 12 Principles of Green Chemistry. This product is used in energy conversion and storage, thus has been enhanced for energy efficiency. Click here for more information.
Applications
PEDOT:PSS polymeric films have been used as a charge dissipation layer in electron-beam lithography and focused ion beam milling. Sample preparation has been reported to be easier and quicker for various substrates, including gallium nitride (GaN) on sapphire (Al2O3) substrates, zinc oxide (ZnO), fused silica, lithium niobate (LiNbO3), silicon carbide (SiC) and diamond (C), spin-coated onto the ITO coated glass substrate. PEDOT: PSS layers have also been reported to be used as anode buffer layer for organic solar cells and as replacements for the transparent conductive coatings of organic solar cells. Various studies report the use of metal modified conductive grade PEDOT: PSS as an anode buffer layer in solar cells, example: copper phthalocyanine/fullerene-based solar cells 4 Conductive PEDOT:PSS combined with polyvinylidene fluoride (PVDF) membranes may be used to prepare PEDOT:PSS-PVDF ionic liquid soft actuators. The function of PEDOT:PSS as a pseudocapacitive material was investigated.
Virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend.
Features & Benefits
Antistat coating for plastic and glass.
Packaging
Packaged in glass bottles
SCF105 Sulbactam/Cefoperazone
RM0.00Brand:
Thermo ScientificTM OxoidTM
Lap Disk w/Reagent 50Tst/Kt
RM0.00Brand:
Thermo Scientific™ Remel™
Thermo Scientific™ Remel LAP Disc w/Reagent Test is used for rapid
differentiation of Aerococcus and Leuconostoc from Streptococcus,
Enterococcus, Lactococcus and Pediococcus using reagent impregnated disc.
Includes:
LAP disc and color developer included
Sodium sulfate anhydrous for analysis EMSURE® ACS,ISO,Reag. Ph Eur (Merck)
Price range: RM85.00 through RM105.00Brand:
Merck
Description
CAS number: 7757-82-6
Chemical Formula: Na₂SO₄
Molar Mass: 142.04 g/mol
Synonyms: –
EMSURE® grade solvents are suitable for a broad spectrum of classical lab applications and are frequently used in regulated and highly demanding lab applications. EMSURE® provides worldwide best and most extensive product specifications. We declare our EMSURE® range to be in compliance with the ACS, with the reagent part of the European Pharmacopoeia (Reag. Ph Eur) and also with the ISO standards.
Product Specification and MSDS for Sodium sulfate EMSURE® (Merck).
P1 Penicillin G
RM79.00Brand:
Thermo ScientificTM OxoidTM
Immobilized T4 DNA Ligase
RM1,470.00Brand:
New England Biolabs
Characteristics of Immobilized T4 DNA Ligase:
- Immobilized T4 DNA Ligase (IM T4 DNA Ligase) consists of T4 DNA Ligase covalently bound to magnetic beads.
- Easily remove enzyme from reaction using a magnet
- Avoid heat inactivation step, which may interfere with downstream applications
- Re-use immobilized enzymes
- Enable new workflows and applications
Gold nanoparticles, 50 nm, NHS ester functionalized, conjugation kit – Sigma-Aldrich
RM1,178.00Brand:
Sigma-Aldrich
Synonyms
NHS-activated gold nanoparticles
Cas No.
–
General description
Gold nanoparticles, 50 nm, NHS ester functionalized, conjugation kit is a comprehensive kit that enables easy, one-step conjugation of your amine-containing ligands to 50 nm gold nanoparticles. The kit includes pre-made mixtures of lyophilized (freeze-dried) NHS-activated gold nanoparticles, along with all the necessary materials for three independent conjugation reactions. The kit components comprise:
- 3 vials of 50 nm NHS-Activated Gold Nanoparticles (lyophilized)
- Protein Resuspension Buffer – 1.5ml
- Reaction Buffer – 1.5ml
- Quencher Solution – 1.5ml
- Reaction protocol
The gold nanoparticles in this kit are supplied as a lyophilized (freeze-dried) mixture. The conjugation reaction is initiated by simply reconstituting the freeze-dried nanoparticles with the protein of interest, which attaches to the nanoparticle surface via lysine residues.
The gold conjugation procedure has a quick hands-on time of around 10 minutes, and the conjugate is fully ready for use within 3 hr. Researchers only need to pipette the biomolecule into a vial containing the nanoparticles, quench the reaction, and perform product washing through microcentrifugation.
The provided protocol is optimized for highly efficient covalent conjugation, resulting in stable gold nanoparticle conjugates. Optional protocol steps involve additional materials, such as 10% aqueous BSA (126615) and Tris saline resuspension buffer (PPB002), which are sold separately.
Application
This gold conjugation kit streamlines the process of conjugating your proteins or biomolecules to 50 nm gold nanoparticles. Gold conjugation helps researchers to visualize and assay a specific protein or antibody of interest. Gold conjugates are useful in a wide range of applications like lateral flow testing, immunoblotting, immuno-electron microscopy, immunohistochemical staining, and other bio-assays.
Different sizes of gold nanoparticles perform better in specific applications. For lateral flow and flow cytometry, we recommend using gold nanoparticles with diameters between 20 nm and 100 nm. For immunoblotting or immuno-electron microscopy, the optimal range is 5 nm to 40 nm. For bioassays utilizing dynamic light scattering, gold nanoparticles with diameters ranging from 60 nm to 100 nm are suggested.
Features and Benefits
- The resulting covalent conjugates offer greater stability compared to those prepared using passive adsorption methods.
- Fast and convenient conjugation reaction with no need for pre-activation.
- A spacer between the gold nanoparticle surface and the conjugated ligand minimizes the impact on the tertiary protein structure. This reduces the likelihood of poor performing conjugates, a common issue encountered with conjugates prepared by passive adsorption.
- Gold surface coating is precisely engineered to minimize non-specific protein binding in biological assays.
Legal Information
Product of CytoDiagnostics, Inc.
Brilliance Bacillus Cereus Selective Supplement
RM547.00Brand:
Thermo ScientificTM OxoidTM
- Brilliance is a chromogenic medium for the isolation and differentiation of Bacillus cereus in food samples.
- Add to Brilliance Bacillus Cereus Agar Base, Part No. CM1036A and CM1036B. Each vial supplements 500mL of medium.
Brilliance Bacillus Cereus Selective Supplement, Oxoid Composition
| Vial contents (each vial is sufficient for 500ml of medium) |
per vial
|
per litre
|
| Polymyxin B |
53,000IU |
106,000IU |
| Trimethoprim |
5.0mg |
10.0mg |
Brilliance Bacillus Cereus Agar, Oxoid Preparation:
Suspend 20.5g in 500ml of distilled water. Mix well and bring to the boil to dissolve completely. Sterilize by autoclaving at 121°C for 15 minutes. Cool the medium to 50°C and aseptically add 1 vial of Brilliance Bacillus cereus Selective Supplement. Mix well and pour into sterile Petri dishes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Brilliance Bacillus cereus Selective Supplement must be stored at 2-8°C.
Store the prepared medium for up to 2 weeks at 2-8°C.
Legionella BMPA-α Selective Supplement 1X10 Vials
RM0.00Brand:
Thermo ScientificTM OxoidTM
Thermo Scientific™ Oxoid Legionella BMPA-α Selective Supplement is a selective supplement for the isolation of legionellae when used with Legionella BCYE Growth Supplement (SR0010) and Legionella CYE Agar Base (CM0655).
Legionella BMPA-α Selective Supplement, Oxoid Composition
| Vial contents |
SR0111E |
per litre |
| Cefamandole |
400µg |
4.0mg |
| Polymyxin |
8,000IU |
80,000IU |
| Anisomycin |
8.0mg |
80.0mg |
Legionella BMPA-α Selective Medium Preparation:
Reconstitute one vial SR0111E per 100ml medium as directed. Aseptically add the vial contents to BCYE-a Medium prepared from Legionella CYE Agar Base (CM0655) and Legionella BCYE Supplement (SR0110) and cooled to 50°C. Mix well and pour into sterile Petri dishes.
PEDOT:PSS, high-conductivity grade, 1.5% aqueous dispersion, neutral pH – Sigma-Aldrich
RM2,115.00Brand:
Sigma-Aldrich
Synonyms
Orgacon™ N-1005, PEDOT:PSS, Poly(2,3-dihydrothieno-1,4-dioxin)-poly(styrenesulfonate)
CAS No
–
General Description
Aqueous surfactant-free dispersion of PEDOT:PSS neutralized to pH >5. Suitable for preparation of pH-neutral transparent conductive films printed electronics applications (e.g. hole injection layers). A conducting polymer such as poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate) anions (PEDOT/PSS) is widely used in various organic optoelectronic devices. PEDOT: PSS is a blend of cationic polythiopene derivative, doped with a polyanion. High electrical conductivity and good oxidation resistance of such polymers make it suitable for electromagnetic shielding and noise suppression. Thus, the polymer film was found to possess high transparency throughout the visible light spectrum and even into near IR and near UV regions, virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Impact of small electric and magnetic fields on the polymer was studied.
Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) is a conductive polymer that is formed by electropolymerizing 3,4-ethylenedioxythiophene in a solution of poly(styrenesulfonate) (PSS). PEDOT is doped with positive ions and PSS with negative ions. PEDOT:PSS is majorly used in organic electronics due to the properties such as:
- low band gap
- good optical properties
- high conductivity
- low redox potential
- easy processing
- tunable film forming ability
We are committed to bringing you Greener Alternative Products, which adhere to one or more of the 12 Principles of Green Chemistry. This product is used in energy conversion and storage, thus has been enhanced for energy efficiency. Click here for more information.
Applications
PEDOT:PSS can be used as an electrode material that forms a layered structure with a high mobility for charge carriers. It can be used for a wide range of energy based applications, such as organic photovoltaics (OPVs), dye sensitized solar cells (DSSCs), organic light emitting diodes (OLEDs) and supercapacitors.
Virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend.
Features & Benefits
Reduced mean particle size with a tighter distribution of sizes allows for the creation of a smooth surface on the ITO electrode, and so electric “shorts” in LED devices can be reduced. Greatly reduced inherent conductivity reduces the occurrence of “cross-talk” in very small pixel (less than 10 micron) matrix array displays.
Legal Information
Product of Agfa
Orgacon is a trademark of Agfa-Gevaert N.V.
Ceftriaxone 32 M.I.C.E. (50 Pack)
RM0.00Brand:
Thermo ScientificTM OxoidTM
**This product is not available at the moment.
Effortlessly establish accurate Minimum Inhibitory Concentration (MIC) values manually using Thermo Scientific™ Oxoid™ Ceftriaxone M.I.C.Evaluator Strips (M.I.C.E.™).
C30 Chloramphenicol
RM0.00Brand:
Thermo ScientificTM OxoidTM
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM152.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
Price range: RM395.00 through RM627.00Brand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
OEM SeaKem® LE Agarose
RM1,514.00Brand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
Applications
Content & Storage
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Brand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available
PRODUCT CATEGORIES
OUR BRANDS
DISTRIBUTION PARTNERS
LabMal is the online distribution of life science and biotechnology products, including microbiology, molecular biology, cell biology, general lab equipment, plastic consumables, chemical, cleansing solution and protein. If you are interested in the products from our distribution partners that are not available in Labmal, please contact us at 03-8051 5106 or info@labmal.com.
