LabMal specialises in online distribution of life science products & services, lab consumables and general lab equipment.

FEATURED PRODUCTS

Visit our shop to see amazing products.

Salt-T4® DNA Ligase

Price range: RM390.00 through RM1,390.00
Brand:

New England Biolabs

Characteristics of Salt-T4 DNA Ligase:

Dermasel Agar Base 500g

RM693.00
Brand:

Thermo ScientificTM OxoidTM

  • Oxoid Dermasel Agar Base is used for primary isolation and identification of dermatophyte fungi.
  • Also available Dermasel Selective Supplement, Part No. SR0075E.

Dermasel Agar Base, Oxoid Composition

Typical Formula*

gm/litre

Mycological peptone

10.0

Glucose

20.0

Agar

14.5

pH 6.9 ± 0.2 @ 25°C

 

Dermasel Agar, Oxoid Preparation:
Suspend 44.5g in 1 litre of distilled water and heat gently to dissolve completely. Add the contents of 1 vial of Dermasel Selective Supplement SR0075, reconstituted as directed in the product insert, to each 500ml of medium to give a level of cycloheximide 0.4g/l and chloramphenicol 0.05g/l. Mix gently and sterilise by autoclaving at 121°C for 10 minutes. Avoid overheating at any time.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared agar plates at 2-8°C.

Precautions
This medium should not be used if agents causing systemic mycoses are being sought9. If such agents are suspected e.g. cryptococcushistoplasma etc., either Dermasel Agar Base without antibiotic supplement must be used in parallel or Brain Heart Infusion Agar CM0375.
If the fungal agent sought is suspected to be nutritionally fastidious, the use of Brain Heart Infusion Agar is particularly helpful.

Sabouraud Dextrose Liquid Medium 500g

RM247.00
Brand:

Thermo ScientificTM OxoidTM

Oxoid Sabouraud Liquid Medium is an USP formulation for mycological sterility testing.

Sabouraud Liquid Medium, Oxoid Composition

Formula

gm/litre

Dextrose

20.0

Pancreatic digest of casein

5.0

Peptic digest of animal tissue

5.0

pH 5.6 ± 0.2 @ 25°C

 

Sabouraud Liquid Medium, Oxoid Preparation:
Dissolve 30g in 1 litre of water (purified as required). Mix well, distribute into final containers and sterilise by autoclaving at 121°C for 15 minutes.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium away from light between 2-25°C.

BactiDrop Oxidase PK/50

RM527.00
Brand:

Thermo Scientific™ Remel™

Remel BactiDrop Oxidase is used for detection of the presence of oxidase enzyme.

Ordering Alerts:

BactiDrop reagents are supplied in crushable ampules encased in a protective plastic sheath with a convenient dropper dispenser tip.

Luna Universal One-Step RT-qPCR Kit

Brand:

New England Biolabs

Make a simpler choice

  • One product per application simplifies selection
  • Convenient master mix formats and user-friendly protocols simplify reaction setup
  • Non-interfering, visible tracking dye helps to eliminate pipetting errors

Experience best-in-class performance

  • All Luna® products have undergone rigorous testing to optimize specificity, sensitivity, accuracy and reproducibility
  • Products perform consistently across a wide variety of sample sources
  • A comprehensive evaluation of commercially-available qPCR and RT-qPCR reagents demonstrates superior performance of Luna products

Optimize your RT-qPCR with Luna WarmStart® Reverse Transcriptase

  • Novel, thermostable reverse transcriptase (RT) improves performance
  • WarmStart RT paired with Hot Start Taq increases reaction specificity and robustness

Ctx30 Cefotaxime

RM80.00
Brand:

Thermo ScientificTM OxoidTM

Manually determine the antibiotic susceptibility of microorganisms using Antimicrobial Susceptibility Testing (AST) methods in conjunction with reliable, easy-to-use Thermo Scientific™ Oxoid™ Cefotaxime Antimicrobial Susceptibility Disks.

Va5 Vancomycin

RM80.00
Brand:

Thermo ScientificTM OxoidTM

Manually determine the antibiotic susceptibility of microorganisms using Antimicrobial Susceptibility Testing (AST) methods in conjunction with reliable, easy-to-use Thermo Scientific™ Oxoid™ Vancomycin Antimicrobial Susceptibility Disks.

Quick Ligation Kit

Brand:

New England Biolabs

The Quick Ligation™ Kit enables ligation of cohesive end or blunt end DNA fragments in 5 minutes at room temperature. (25°C )

  • Fast – 5 minutes for cohesive or blunt ends
  • Convenient – ligation performed at room temperature
  • Flexible – suitable for all common ligation reactions
  • Not sure which ligase to choose? Refer to our DNA and RNA Ligase Properties Chart

CampyGen Compact 20/Pck

RM272.00
Brand:

Thermo ScientificTM OxoidTM

  • Produce suitable gaseous atmosphere for growth of microaerophilic microorganisms with the Oxoid CampyGen Compact Sachet.
  • For use in Compact Plastic Pouch.
  • Each pouch holds 2 standard size petri dishes.
  • No water or catalyst required.
  • No hydrogen gas produced.
  • Use with Compact Plastic Pouch Part No. AG0020C and AnaeroGen™ Compact Sealing Clip, Part No. AN0005C.

Precautions
This product is for in vitro use only
As soon as the CampyGen paper sachet is exposed to air, the reaction will start. It is therefore essential that the paper sachet is placed in the jar and the jar sealed within one minute.
The reaction of the ascorbic acid with oxygen is exothermic. However, the temperature of the CampyGen paper sachet will not exceed 65°C.

Storage
Store at 2-25°C. Under these conditions, the CampyGen sachets will retain their reactivity until the expiry date given on the outer box and on the foil sachet.

Methylammonium iodide, 98% – Sigma Aldrich

RM1,309.00
Brand:

Sigma-Aldrich

Synonyms
Methanamine hydriodide

Application
Methanamine hydriodide is an important precursor for the preparation of perovskite photoactive layers for solar energy conversion. Methylammonium iodide (MAI) is extensively used as a precursor material for the fabrication of perovskite solar cells. These solar cells offer high conversion efficiencies.

Methylammonium iodide can be used as a precursor in combination with lead iodide to change the morphology of the resulting perovskite materials. Perovskite materials can further be utilized in the fabrication of alternative energy devices such as light emitting diodes (LEDs), and perovskite solar cells (PSCs).

Other Notes
We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product has been enhanced for energy efficiency. Find details here.

CAS Number

14965-49-2

Molecular Weight

158.97

MDL number

MFCD28100833

UNSPSC Code

12352302

NACRES

Na.23

Greener alternative product characteristics

Design for Energy Efficiency
Learn more about the Principles of Green Chemistry.

 

Mannitol Salt Agar 500g

RM230.00
Brand:

Thermo ScientificTM OxoidTM

Presumptively detect, isolate and enumerate pathogenic staphylococci in milk, food, fish and other specimens with Thermo Scientific™ Oxoid™ Mannitol Salt Agar (Dehydrated). Due to high concentrations of salt in the medium, most unwanted bacteria are inhibited with the exception of some halophilic marine organisms. Presumptive coagulase-positive staphylococci produce colonies surrounded by bright yellow zones while non-pathogenic staphylococci produce colonies with reddish purple zones.

Mannitol Salt Agar, Oxoid Composition

Typical Formula*

gm/litre

`Lab-Lemco’ powder

1.0

Peptone

10.0

Mannitol

10.0

Sodium chloride

75.0

Phenol red

0.025

Agar

15.0

pH 7.5 ± 0.2 @ 25°C

 

Mannitol Salt Agar, Oxoid Preparation:
Suspend 111g in 1 litre of distilled water and bring to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared plates at 2-8°C.

Perovskite quantum dots oleic acid and oleylamine coated, fluorescence λem 450 nm, 10 mg/mL in toluene – Sigma-Aldrich

RM992.00
Brand:

Sigma-Aldrich

Synonyms
Cadmium free QDs, Fluorescent nanocrystals, Perovskite nanocrystals, QDs

Applications
For Perovskite quantum dots:
Perovskite quantum dots (QDs) of common formula CsPbX3 (X = Cl, Br, I) possess high photoluminescence efficiency and narrow emission and emit in the visible spectral regime. Perovskite QDs are cadmium free and the aforementioned properties render them suitable for applications in light emitting diodes (LEDs), lasers, liquid crystal displays (LCDs) etc.

OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L

RM143.00
Brand:

Merck

** This product has been discontinued.

OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.

It is suitable to be used in:

  • Cell Biology
    • Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
    • Diluent for live cells staining
  • Sterile solution preparation Microbiology Sample Preparation
    • Diluent and rinsing reagent in Microbial Membrane Filtration

Key Specification:

  1. Sterile by USP Standard
  2. DNase, RNase, Protease-Free
  3. < 500 ppb Total Organic Carbon
  4. < 0.025 EU/ml Bacterial Endotoxin

COA for Omnipur Sterile Water

Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form

Price range: RM395.00 through RM627.00
Brand:

Sigma-Aldrich

This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!

Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form Brochure

OEM SeaKem® LE Agarose

RM1,514.00
Brand:

Lonza

Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.

Benefits

  • All Lonza Agarose is quality tested to certify performance
  • High gel strength
  • Low EEO
  • Standard melting temperature

Applications

  • Standard DNA/RNA Electrophoreisis

Content & Storage

  • SeaKem® LE Agarose 500 g

1 kb DNA Ladder, NEB

Brand:

New England Biolabs

This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.

1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.

  • Size range: 500 bp to 10 kb
  • Value pricing
  • Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
  • Easy to identify reference bands
  • Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes

Q5 Hot Start High-Fidelity 2X Master Mix

Brand:

New England Biolabs

Fidelity at its finest

Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.

  • Highest fidelity amplification (~280X higher than Taq)
  • Ultra-low error rates
  • Superior performance for a broad range of amplicons (from high AT to high GC)
  • Hot start and master mix formats available

FEATURED PRODUCTS

Visit our shop to see amazing products.

Salt-T4® DNA Ligase

Price range: RM390.00 through RM1,390.00
Brand:

New England Biolabs

Characteristics of Salt-T4 DNA Ligase:

Dermasel Agar Base 500g

RM693.00
Brand:

Thermo ScientificTM OxoidTM

  • Oxoid Dermasel Agar Base is used for primary isolation and identification of dermatophyte fungi.
  • Also available Dermasel Selective Supplement, Part No. SR0075E.

Dermasel Agar Base, Oxoid Composition

Typical Formula*

gm/litre

Mycological peptone

10.0

Glucose

20.0

Agar

14.5

pH 6.9 ± 0.2 @ 25°C

 

Dermasel Agar, Oxoid Preparation:
Suspend 44.5g in 1 litre of distilled water and heat gently to dissolve completely. Add the contents of 1 vial of Dermasel Selective Supplement SR0075, reconstituted as directed in the product insert, to each 500ml of medium to give a level of cycloheximide 0.4g/l and chloramphenicol 0.05g/l. Mix gently and sterilise by autoclaving at 121°C for 10 minutes. Avoid overheating at any time.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared agar plates at 2-8°C.

Precautions
This medium should not be used if agents causing systemic mycoses are being sought9. If such agents are suspected e.g. cryptococcushistoplasma etc., either Dermasel Agar Base without antibiotic supplement must be used in parallel or Brain Heart Infusion Agar CM0375.
If the fungal agent sought is suspected to be nutritionally fastidious, the use of Brain Heart Infusion Agar is particularly helpful.

Sabouraud Dextrose Liquid Medium 500g

RM247.00
Brand:

Thermo ScientificTM OxoidTM

Oxoid Sabouraud Liquid Medium is an USP formulation for mycological sterility testing.

Sabouraud Liquid Medium, Oxoid Composition

Formula

gm/litre

Dextrose

20.0

Pancreatic digest of casein

5.0

Peptic digest of animal tissue

5.0

pH 5.6 ± 0.2 @ 25°C

 

Sabouraud Liquid Medium, Oxoid Preparation:
Dissolve 30g in 1 litre of water (purified as required). Mix well, distribute into final containers and sterilise by autoclaving at 121°C for 15 minutes.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium away from light between 2-25°C.

BactiDrop Oxidase PK/50

RM527.00
Brand:

Thermo Scientific™ Remel™

Remel BactiDrop Oxidase is used for detection of the presence of oxidase enzyme.

Ordering Alerts:

BactiDrop reagents are supplied in crushable ampules encased in a protective plastic sheath with a convenient dropper dispenser tip.

Luna Universal One-Step RT-qPCR Kit

Brand:

New England Biolabs

Make a simpler choice

  • One product per application simplifies selection
  • Convenient master mix formats and user-friendly protocols simplify reaction setup
  • Non-interfering, visible tracking dye helps to eliminate pipetting errors

Experience best-in-class performance

  • All Luna® products have undergone rigorous testing to optimize specificity, sensitivity, accuracy and reproducibility
  • Products perform consistently across a wide variety of sample sources
  • A comprehensive evaluation of commercially-available qPCR and RT-qPCR reagents demonstrates superior performance of Luna products

Optimize your RT-qPCR with Luna WarmStart® Reverse Transcriptase

  • Novel, thermostable reverse transcriptase (RT) improves performance
  • WarmStart RT paired with Hot Start Taq increases reaction specificity and robustness

Ctx30 Cefotaxime

RM80.00
Brand:

Thermo ScientificTM OxoidTM

Manually determine the antibiotic susceptibility of microorganisms using Antimicrobial Susceptibility Testing (AST) methods in conjunction with reliable, easy-to-use Thermo Scientific™ Oxoid™ Cefotaxime Antimicrobial Susceptibility Disks.

Va5 Vancomycin

RM80.00
Brand:

Thermo ScientificTM OxoidTM

Manually determine the antibiotic susceptibility of microorganisms using Antimicrobial Susceptibility Testing (AST) methods in conjunction with reliable, easy-to-use Thermo Scientific™ Oxoid™ Vancomycin Antimicrobial Susceptibility Disks.

Quick Ligation Kit

Brand:

New England Biolabs

The Quick Ligation™ Kit enables ligation of cohesive end or blunt end DNA fragments in 5 minutes at room temperature. (25°C )

  • Fast – 5 minutes for cohesive or blunt ends
  • Convenient – ligation performed at room temperature
  • Flexible – suitable for all common ligation reactions
  • Not sure which ligase to choose? Refer to our DNA and RNA Ligase Properties Chart

CampyGen Compact 20/Pck

RM272.00
Brand:

Thermo ScientificTM OxoidTM

  • Produce suitable gaseous atmosphere for growth of microaerophilic microorganisms with the Oxoid CampyGen Compact Sachet.
  • For use in Compact Plastic Pouch.
  • Each pouch holds 2 standard size petri dishes.
  • No water or catalyst required.
  • No hydrogen gas produced.
  • Use with Compact Plastic Pouch Part No. AG0020C and AnaeroGen™ Compact Sealing Clip, Part No. AN0005C.

Precautions
This product is for in vitro use only
As soon as the CampyGen paper sachet is exposed to air, the reaction will start. It is therefore essential that the paper sachet is placed in the jar and the jar sealed within one minute.
The reaction of the ascorbic acid with oxygen is exothermic. However, the temperature of the CampyGen paper sachet will not exceed 65°C.

Storage
Store at 2-25°C. Under these conditions, the CampyGen sachets will retain their reactivity until the expiry date given on the outer box and on the foil sachet.

Methylammonium iodide, 98% – Sigma Aldrich

RM1,309.00
Brand:

Sigma-Aldrich

Synonyms
Methanamine hydriodide

Application
Methanamine hydriodide is an important precursor for the preparation of perovskite photoactive layers for solar energy conversion. Methylammonium iodide (MAI) is extensively used as a precursor material for the fabrication of perovskite solar cells. These solar cells offer high conversion efficiencies.

Methylammonium iodide can be used as a precursor in combination with lead iodide to change the morphology of the resulting perovskite materials. Perovskite materials can further be utilized in the fabrication of alternative energy devices such as light emitting diodes (LEDs), and perovskite solar cells (PSCs).

Other Notes
We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product has been enhanced for energy efficiency. Find details here.

CAS Number

14965-49-2

Molecular Weight

158.97

MDL number

MFCD28100833

UNSPSC Code

12352302

NACRES

Na.23

Greener alternative product characteristics

Design for Energy Efficiency
Learn more about the Principles of Green Chemistry.

 

Mannitol Salt Agar 500g

RM230.00
Brand:

Thermo ScientificTM OxoidTM

Presumptively detect, isolate and enumerate pathogenic staphylococci in milk, food, fish and other specimens with Thermo Scientific™ Oxoid™ Mannitol Salt Agar (Dehydrated). Due to high concentrations of salt in the medium, most unwanted bacteria are inhibited with the exception of some halophilic marine organisms. Presumptive coagulase-positive staphylococci produce colonies surrounded by bright yellow zones while non-pathogenic staphylococci produce colonies with reddish purple zones.

Mannitol Salt Agar, Oxoid Composition

Typical Formula*

gm/litre

`Lab-Lemco’ powder

1.0

Peptone

10.0

Mannitol

10.0

Sodium chloride

75.0

Phenol red

0.025

Agar

15.0

pH 7.5 ± 0.2 @ 25°C

 

Mannitol Salt Agar, Oxoid Preparation:
Suspend 111g in 1 litre of distilled water and bring to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared plates at 2-8°C.

Perovskite quantum dots oleic acid and oleylamine coated, fluorescence λem 450 nm, 10 mg/mL in toluene – Sigma-Aldrich

RM992.00
Brand:

Sigma-Aldrich

Synonyms
Cadmium free QDs, Fluorescent nanocrystals, Perovskite nanocrystals, QDs

Applications
For Perovskite quantum dots:
Perovskite quantum dots (QDs) of common formula CsPbX3 (X = Cl, Br, I) possess high photoluminescence efficiency and narrow emission and emit in the visible spectral regime. Perovskite QDs are cadmium free and the aforementioned properties render them suitable for applications in light emitting diodes (LEDs), lasers, liquid crystal displays (LCDs) etc.

OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L

RM143.00
Brand:

Merck

** This product has been discontinued.

OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.

It is suitable to be used in:

  • Cell Biology
    • Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
    • Diluent for live cells staining
  • Sterile solution preparation Microbiology Sample Preparation
    • Diluent and rinsing reagent in Microbial Membrane Filtration

Key Specification:

  1. Sterile by USP Standard
  2. DNase, RNase, Protease-Free
  3. < 500 ppb Total Organic Carbon
  4. < 0.025 EU/ml Bacterial Endotoxin

COA for Omnipur Sterile Water

Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form

Price range: RM395.00 through RM627.00
Brand:

Sigma-Aldrich

This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!

Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form Brochure

OEM SeaKem® LE Agarose

RM1,514.00
Brand:

Lonza

Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.

Benefits

  • All Lonza Agarose is quality tested to certify performance
  • High gel strength
  • Low EEO
  • Standard melting temperature

Applications

  • Standard DNA/RNA Electrophoreisis

Content & Storage

  • SeaKem® LE Agarose 500 g

1 kb DNA Ladder, NEB

Brand:

New England Biolabs

This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.

1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.

  • Size range: 500 bp to 10 kb
  • Value pricing
  • Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
  • Easy to identify reference bands
  • Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes

Q5 Hot Start High-Fidelity 2X Master Mix

Brand:

New England Biolabs

Fidelity at its finest

Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.

  • Highest fidelity amplification (~280X higher than Taq)
  • Ultra-low error rates
  • Superior performance for a broad range of amplicons (from high AT to high GC)
  • Hot start and master mix formats available

PRODUCT CATEGORIES

Shop by Categories

Plastic Consumables (35)

General Lab Equipment (107)

Microbiology (704)

Molecular Biology (138)

Protein (29)

Cell Biology (24)

Chemical (161)

Cleansing (15)

OUR BRANDS

DISTRIBUTION PARTNERS

LabMal is the online distribution of life science and biotechnology products, including microbiology, molecular biology, cell biology, general lab equipment, plastic consumables, chemical, cleansing solution and protein. If you are interested in the products from our distribution partners that are not available in Labmal, please contact us at 03-8051 5106 or info@labmal.com.