LabMal specialises in online distribution of life science products & services, lab consumables and general lab equipment.
FEATURED PRODUCTS
Mxf5 Moxifloxacin
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
C L E D Medium 500g
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
Isolate, enumerate and differentiate urinary pathogens with Thermo Scientific™ Oxoid™ C.L.E.D. Medium (Dehydrated). Cystine-Lactose-Electrolyte-Deficient (CLED) Medium which provides good colonial differentiation, clear diagnostic characteristics and prevents swarming of Proteus spp. due to the electrolyte deficiency in the formulation.
C.L.E.D. Medium, Oxoid Composition
Typical Formula* | gm/litre |
Peptone | 4.0 |
`Lab-Lemco’ powder | 3.0 |
Tryptone | 4.0 |
Lactose | 10.0 |
L-cystine | 0.128 |
Bromothymol blue | 0.02 |
Agar | 15.0 |
pH 7.3 ± 0.2 @ 25°C |
C.L.E.D. Medium, Oxoid Preparation:
Suspend 36.2g in 1 litre of distilled water. Bring to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes. Mix well before pouring.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°Cand use before the expiry date on the label.
Store the prepared medium at 2-8°C.
Cro5 Ceftriaxone
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
Quercetin, ≥95% (Sigma-Aldrich)
Login to see pricesBrand:
Sigma-Aldrich
Description
CAS number: 117-39-5
Chemical Formula: C15H10O7
Molar Mass: 302.24g/mol
Synonyms: 2-(3,4-Dihydroxyphenyl)-3,5,7-trihydroxy-4H-1-benzopyran-4-one, 3,3′,4′,5,6-Pentahydroxyflavone
Application
• Quercetin has been used as an antioxidant which reversed the immunosuppressive effects of high glucose and hyperglycemic sera in type 2 diabetic patients.
• It has been used as a detoxifying phytochemical in Apis mellifera.
• It has been used as a positive control in DPPH (2,2- diphenyl-1-picryhydrazyl) radical scavenging assay. It has also been used for the preparation of calibration curve to determine total flavonoid content.
McFarland Turb Standard 3.0
Login to see pricesBrand:
Thermo Scientific™ Remel™
- Thermo Scientific™ Remel McFarland Equivalence Turbidity Standard is packaged in plastic case with a visual comparison card.
- Tube size is 15 x 103mm and fits in most spectrophotometers.
- Polystyrene technology allows longer shelf life.
ONE Broth Salmonella Selective Supplement 10X2.25L
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
Thermo Scientific™ Oxoid ONE Broth Salmonella Selective Supplement is a selective supplement for use with ONE Broth-Salmonella Base.
ONE Broth Salmonella Selective Supplement, Oxoid Composition
Vial Contents (each vial is sufficient for 500ml of medium) | per vial | per litre |
Novobiocin | 2.7mg | 12mg |
ONE Broth Salmonella Selective Medium Preparation:
Suspend 5.6g of ONE Broth-Salmonella Base in 225ml of distilled water. Sterilize by autoclaving at 121°C for 15 minutes. Cool to below 50°C and add the contents of 1 vial of ONE Broth-Salmonella Supplement (SR0242), resuspended as directed.
Storage conditions and Shelf life
The ONE Broth-Salmonella Selective Supplement should be stored in the dark at 2-8ºC. When stored as directed, the unopened products will remain stable until the expiry date printed on the packaging.
Once prepared, ONE Broth-Salmonella can be stored for up to 2 weeks when made from CM1091 and SR0242 according to the manufacturer’s instructions and stored at 2-8ºC, in the dark. A longer shelf life may be attainable, but should be validated under the relevant, local manufacturing and storage conditions.
Q5 Hot Start High-Fidelity DNA Polymerase
Login to see pricesBrand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available
Mycoplasma Agar Base 500g
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
- Oxoid Mycoplasma Agar Base is used for the selective isolation of Mycoplasma pneumoniae.
- Also available Mycoplasma Supplement P, Part No. SR0060C and Mycoplasma Supplement G, Part No. SR0059C.
Mycoplasma Agar Base, Oxoid Composition
Typical Formula* | gm/litre |
Bacteriological peptone | 10.0 |
`Lab-Lemco’ powder | 10.0 |
Sodium chloride | 5.0 |
Mineral supplement | 0.5 |
Agar | 10.0 |
pH 7.8 ± 0.2 @ 25°C |
Mycoplasma Agar, Oxoid Preparation:
Add 35.5g to 1 litre of distilled water. Boil to dissolve the agar and distribute in 80ml volumes. Sterilise by autoclaving at 121°C for 15 minutes. Cool to approximately 50°C and add one vial of Mycoplasma Supplement SR0059 reconstituted as directed.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
Precautions
Thallous acetate is toxic, observe the precautions in the HAZARDS section.
Do not use thallous acetate media to isolate Ureaplasma urealyticum.
Mycoplasmas may be suspected if (1) typical morphology (2) no growth in media without serum (3) colonies are embedded below the agar surface.
Enr5 Enrofloxacin
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
Tryptose Blood Agar Base 500g
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
Cultivate and isolate fastidious microorganisms and determine their hemolytic reactions using Thermo Scientific™ Oxoid™ Tryptose Blood Agar Base (Dehydrated) with supplementation of blood. This highly nutritious medium is specially developed by Casman for the preparation of a blood agar which will support the growth of many fastidious organisms.
The original formulation included 0.3g dextrose per litre which interfered with the hemolytic reactions. It is now used without dextrose as a standard medium.
Tryptose Blood Agar Base (Dehydrated), Oxoid Composition
Typical Formula* | gm/litre |
Tryptose | 10.0 |
`Lab-Lemco’ powder | 3.0 |
Sodium chloride | 5.0 |
Agar | 12.0 |
pH 7.2 ± 0.2 @ 25°C |
Tryptose Blood Agar Preparation:
Suspend 30g in 1 litre of distilled water. Bring to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes.
For blood agar, cool the basal medium to 45-50°C and add 7% of sterile blood. Mix thoroughly, taking care to avoid incorporation of air bubbles, and dispense into Petri dishes or other containers.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared plates of medium at 2-8°C.
PCR Marker
Login to see pricesBrand:
New England Biolabs
- Size range: 50 bp to 766 bp
- Value pricing
- Supplied with free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 100 gel lanes; large size suitable for 500 gel lanes
Pre-Supplemented DRBC (ISO) Agar
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
Isolate and enumerate yeasts and molds associated with food spoilage with Thermo Scientific™ Oxoid™ Pre-supplemented Dichloran Rose-Bengal Chloramphenicol (DRBC) (ISO) Agar Base (Dehydrated) while adhering to ISO 21527-1: 2008. Due to the presence of antibiotic Chloramphenicol in the formulation, the medium provides selectivity against bacteria as well as reducing harmful chemical handling in the laboratory.
Pre-supplemented Dichloran Rose-Bengal Chloramphenicol (DRBC) (ISO) Agar Base (Dehydrated), Oxoid Composition
Typical Formula* | gm/litre |
Peptone | 5.0 |
Glucose | 10.0 |
Potassium dihydrogen phosphate | 1.0 |
Magnesium sulphate | 0.5 |
Dichloran | 0.002 |
Rose-bengal | 0.025 |
Agar | 15.0 |
Chloramphenicol | 0.1 |
pH 5.6 ± 0.2 @ 25°C |
Pre-supplemented Dichloran Rose-Bengal Chloramphenicol (DRBC) (ISO) Agar, Oxoid Preparation:
Suspend 15.75g per 500ml (31.5g/l) of distilled water and heat to dissolve completely. Sterilize by autoclaving at 121°C for 15 minutes. Cool to 50°C, mix well and pour into sterile Petri dishes. It is advised to dispense the powdered medium into containers under an extraction hood due to the chloramphenicol in the medium base.
Storage instructions
Store the dehydrated medium at 10–30°C and use before the expiry date
Precautions
ROSE-BENGAL PHOTO-OXIDIZES TO FORM TOXIC COMPOUNDS. STORE PLATES OF THE MEDIUM IN THE DARK AND AVOID EXPOSURE TO LIGHT.
Some strains of fungi may be inhibited on this medium.
The dichloran compound used in this medium is Botran® 2,6-Dichloro-4-Nitro-Analine (CAS: 99-30-9).
Pre-supplemented DRBC (ISO) Agar (CM1149) contains Chloramphenicol in the base powder and is therefore considered a toxic compound which should be handled in accordance with good industrial hygiene and safety practice. Always consult the MSDS before handling the powder.
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
Login to see pricesBrand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
Login to see pricesBrand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form Brochure
OEM SeaKem® LE Agarose
Login to see pricesBrand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
- All Lonza Agarose is quality tested to certify performance
- High gel strength
- Low EEO
- Standard melting temperature
Applications
- Standard DNA/RNA Electrophoreisis
Content & Storage
- SeaKem® LE Agarose 500 g
1 kb DNA Ladder, NEB
Login to see pricesBrand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Login to see pricesBrand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available
FEATURED PRODUCTS
Breast Cancer Genetics – Electrophoresis Education kit
Login to see pricesBrand:
Cleaver Scientific
Breastcancer is the most common type of cancer. About 5-10% of all breast cancers areinherited. Mutations in the breast cancer 1 (BRCA1) gene greatly increase therisk of developing breast and ovarian cancer. This gene is found on chromosome17 and is normally responsible for DNA repair. It is therefore called a tumoursuppressor gene. Mutations in BRCA1 are dominant and so the presence of onecopy of a mutated form can cause an increased risk of cancer.
This experiment will test DNA of members of a family where the grandmother (generation 2) and her daughter(generation 3) both died of breast cancer. The deceased women had a mutation intheir BRCA1 gene.
Each kit included enough DNA, agarose gel, electrophoesis buffer and DNA stain for up to 8 groups of students (8 gels).
Key Features
- Whole experiment takes less that 1 hour.
- Great for introducing genetic diseases and genetic screening to students
- Works perfectly with Cleaver Scientific electrophoresis equipment
FOX10 Cefoxitin
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
** This item is not available at the moment. Please contact us for more information.
Manually determine the antibiotic susceptibility of microorganisms using Antimicrobial Susceptibility Testing (AST) methods in conjunction with reliable, easy-to-use Thermo Scientific™ Oxoid™ Cefoxitin Antimicrobial Susceptibility Disks.
Disk Dispenser 8 Place 90mm Skirt
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
Accurately place antimicrobial susceptibility disks onto your media of choice when carrying out manual Antimicrobial Susceptibility Testing methods using a self-tamping Thermo Scientific™ Oxoid™ Antimicrobial Susceptibility Disk Dispenser.
Brom Thymol Blue (1%) BTL/25ml
Login to see pricesBrand:
Thermo Scientific™ Remel™
Thermo Scientific™ Remel Brom Thymol Blue is a pH indicator for use with microbiological culture media and for confirmation of negative reactions in C-H-O Carbohydrates.
McFarland Turb Standard 5.0
Login to see pricesBrand:
Thermo Scientific™ Remel™
- Thermo Scientific™ Remel McFarland Equivalence Turbidity Standard is packaged in plastic case with a visual comparison card.
- Tube size is 15 x 103mm and fits in most spectrophotometers.
- Polystyrene technology allows longer shelf life.
Salmonella Selective Supplement
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
Oxoid Salmonella Selective Supplement is used for the presumptive identification of Salmonella species from clinical and food samples.
- Add to Chromogenic Salmonella Agar Base, Part No. CM1007B or Brilliance™ Salmonella Agar Base, Part No. CM1092B
- Each vial supplements 500mL of medium
Salmonella Selective Supplement, Oxoid Composition
Vial Contents (each vial is sufficient for 500ml of medium) | per vial | per litre |
Novobiocin | 2.5mg | 5mg |
Cefsulodin | 6mg | 12mg |
Chromogenic Salmonella Agar, Oxoid Preparation:
Suspend 25g in 500ml of distilled water and add the contents of one vial of Salmonella Selective Supplement (SR0194) reconstituted as directed. Mix well and bring to the boil with frequent agitation. DO NOT AUTOCLAVE. DO NOT HOLD AT BOILING TEMPERATURE. Cool to 50°C, mix well and pour into sterile Petri dishes.
Brilliance Salmonella Agar, Oxoid Preparation:
Suspend 27g of Brilliance Salmonella Agar Base in 500ml of distilled water. Add the contents of 1 vial of Salmonella Selective Supplement, resuspended as directed. Mix well and sterilise by bringing to the boil with frequent agitation. Cool to around 50ºC, mix well and pour into sterile Petri dishes.
NOTE: It is critical that the selective supplement is added prior to heating. When preparing volumes greater than 1 litre contact Oxoid Technical Support for directions.
Storage conditions and Shelf life
Salmonella Selective Supplement should be stored in the dark at 2-8ºC. When stored as directed, the un-opened products will remain stable until the expiry date printed on the packaging.
Dor10 Doripenem 10µg
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
Streptomycin 300 (S300)
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
Cary-Blair Medium 500g
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
Oxoid Cary-Blair Transport Medium is a transport medium for gram-negative and anaerobic microorganisms.
Cary-Blair Transport Medium, Oxoid Composition
Typical Formula* | gm/litre |
Disodium hydrogen phosphate | 1.1 |
Sodium thioglycollate | 1.5 |
Sodium chloride | 5.0 |
Calcium chloride | 0.09 |
Agar | 5.6 |
pH 8.4 ± 0.2 @ 25°C |
Cary-Blair Transport Medium, Oxoid Preparation:
Suspend 13.3g in 1 litre of distilled water and bring gently to the boil to dissolve the agar. Distribute into small, screw-cap bottles and sterilise by immersing in free-steam for 15 minutes. Allow to cool and tighten the screw caps to prevent water loss.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
The prepared medium should be stored away from light at 2-8°C or at room temperature (22-25°C) up to 19 months.
Precautions
The medium should not be incubated to check sterility, prior to use. This should be carried out on separate quality control samples.
The medium can maintain the viability of fastidious organisms for transport purposes but it should not be used as a storage or enrichment medium.
The results obtained from the medium are dependent on the quality of the specimen material. Commensal anaerobic organisms may overgrow in the medium and cause misleading results.
Complete 2-D Systems – Mini to Maxi
Login to see pricesBrand:
Cleaver Scientific
The omniPAGE 2-D Systems include both modules required for Slab Gel and First Dimension Electrophoresis and accessories, to provide a complete Mini, Mini Wide or Maxi 2-D system. The Tube Gel Module includes a rapid release gasket for easy tube extraction. Focusing can be accomplished in as little as three hours in the Mini Unit. Disposable capillary tubes are included for added convenience, plus 2-D combs and spacers which are colour coded according to thickness for easy identification.
Package includes:
- 1x omniPAGE Mini Vertical Unit which includes: 2x2mm thick notched glass plates, 2x2mm thick plain glass plates with 1mm thick bonded spacers, 1x dummy plate, 2x combs (1mm thick 12 samples), 1x casting base, silicone mat, cooling pack
- 1x Capillary electrophoresis module which includes: internal running module for tube gels, capillary tubes, blanking plugs, 2-D combs and spacers
Anaerojar Base, Oxoid
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
Oxoid AnaeroJar Base is a polycarbonate jar base for use with AnaeroJar 2.5L, Part No. AG0025A.
Trypsin from Porcine Pancreas (Sigma)
Login to see pricesBrand:
Sigma
Description
Product line: BioReagent
Biological source: Porcine pancreas
Specific activity: 1,000-2,000 BAEE units/mg solid
Trypsin is applicable for tissue disaggregation, due to its effective action and tolerance towards different cell types and serum-induced neutralization.[1]
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
Login to see pricesBrand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
Login to see pricesBrand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form Brochure
OEM SeaKem® LE Agarose
Login to see pricesBrand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
- All Lonza Agarose is quality tested to certify performance
- High gel strength
- Low EEO
- Standard melting temperature
Applications
- Standard DNA/RNA Electrophoreisis
Content & Storage
- SeaKem® LE Agarose 500 g
1 kb DNA Ladder, NEB
Login to see pricesBrand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Login to see pricesBrand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available
PRODUCT CATEGORIES
DISTRIBUTION PARTNERS
LabMal is the online distribution of life science and biotechnology products, including microbiology, molecular biology, cell biology, general lab equipment, plastic consumables, chemical, cleansing solution and protein. If you are interested in the products from our distribution partners that are not available in Labmal, please contact us at 03-8051 5106 or info@labmal.com.