LabMal specialises in online distribution of life science products & services, lab consumables and general lab equipment.
FEATURED PRODUCTS
KAA Agar Base 500g
RM843.00Brand:
Thermo ScientificTM OxoidTM
- Oxoid Kanamycin Aesculin Azide Agar Base is a selective medium for the isolation of Enterococci in foodstuffs.
- Also available Kanamycin Sulphate Selective Supplement, Part No. SR0092E.
Kanamycin Aesculin Azide Agar Base, Oxoid Composition
| Typical Formula* |
gm/litre |
| Tryptone |
18.8 |
| Yeast extract |
5.0 |
| Sodium chloride |
5.0 |
| Sodium citrate |
1.0 |
| Aesculin |
1.0 |
| Ferric ammonium citrate |
0.5 |
| Sodium azide |
0.15 |
| Starch | 0.6 |
| Mix for Streptococci | 0.6 |
| Agar | 10.0 |
| Final pH 7.0 ± 0.2 @ 25°C |
Kanamycin Aesculin Azide Agar, Oxoid Preparation:
Suspend 21.3g in 500ml of distilled water. Add one vial of Kanamycin Supplement (SR0092) reconstituted as directed. Bring to the boil. Sterilise by autoclaving at 121°C for 15 minutes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared media at 2-8°C.
Precautions
Observe the hazard precautions regarding sodium azide when disposing of the medium.
There is no universal medium which will isolate all strains of enterococci.
Unless a presumptive count is acceptable all isolates should have their identity confirmed with further tests.
CCDA Selective Supplement 1 x 10 Vials
RM855.00Brand:
Thermo ScientificTM OxoidTM
Oxoid CCDA Selective Supplement is used for the isolation of Campylobacter spp., especially C. upsaliensis or Arcobacter.
- For the isolation of Arcobacter spp., add to Arcobacter Broth Base, Part No. CM0965B
- For the isolation of Campylobacter spp., especially C. upsaliensis, add to Campylobacter Blood-Free Selective Agar Base (CCDA Preston), Part No. CM0739B
CCDA Selective Supplement, Oxoid Composition
| Vial contents (each vial is sufficient for 500ml of medium) |
per vial
|
per litre
|
| Cefoperazone |
16mg |
32mg
|
| Amphotericin B |
5mg |
10mg
|
Campylobacter Blood-Free Selective Agar, Oxoid Preparation:
Suspend 22.75g of Campylobacter Blood-Free Selective Agar Base in 500ml of distilled water and bring to the boil to dissolve. Sterilise by autoclaving at 121°C for 15 minutes. Cool to 50°C. Aseptically add 1 vial of CCDA Selective Supplement SR0155 reconstituted as directed. Mix well and pour into sterile Petri dishes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the selective supplement in the dark at 2-8°C and use before the expiry date on the label.
The prepared medium may be stored for up to 2 weeks at 2-8°C .
Brilliance™ UTI 500g
RM0.00Brand:
Thermo ScientificTM OxoidTM
Thermo Scientific™ Oxoid Brilliance™ UTI Agar (formerly Chomogenic UTI Agar ) is a chromogenic medium for the presumptive identification and differentiation of all the main micro-organisms that cause urinary tract infections (UTIs).
Brilliance UTI Agar, Oxoid Composition
| Typical Formula* |
gm/litre |
| Peptone |
15.0 |
| Chromogenic mix |
26.3 |
| Agar |
15.0 |
| Final pH 6.8 ± 0.2 @ 25°C |
Brilliance UTI Agar, Oxoid Preparation:
Suspend 56.3g of Brilliance UTI Agar in 1 litre of distilled water, mix well and sterilise by autoclaving at 121°C for 15 minutes. Cool to 50°C and mix well before pouring plates.
Storage conditions and Shelf life
Dehydrated Brilliance UTI Agar must be stored tightly capped in the original container at 10-30ºC.
Oxoid Brilliance UTI Agar plates should be stored in the original packaging, at the temperature stated on the pack or product specification, and protected from direct light.
When stored as directed, the unopened product will remain stable until the expiry date on the label. Locally prepared media can be stored for up to 2 weeks when made from CM0949 according to the manufacturer’s instructions and stored at 2-8ºC, in the dark. A longer shelf life may be attainable, but should be validated under the relevant, local manufacturing and storage conditions.
Buffered oxide etchant (BOE) 10:1 – Sigma-Aldrich
RM660.00Brand:
Sigma-Aldrich
Synonyms
BHF, Buffered HF
Cas No.
–
General Descriptions
Buffered oxide etchant (BOE) is a wet etchant used in microfabrication. Its primary use is in etching thin films of silicon dioxide (SiO2) or silicon nitride (Si3N4). It is a mixture of a buffering agent, such as ammonium fluoride (NH4F), and hydrofluoric acid (HF). Concentrated HF etches silicon dioxide too quickly for good process control and also peels the photoresist used in lithographic patterning.
Application
Buffered oxide etchant (BOE) 10:1 can be used in the etching of titanium carbide, which can be used in microelectromechanical systems (MEMS). It can also be used in the etching of spin-on-dopant (SOD) for the development of conductor-insulator-conductor tunnelling diodes. It can also be used to enhance the surface of fused quartz devices.
Clostridium Difficile Selective Supplement 1 x 10 Vials
RM1,673.00Brand:
Thermo ScientificTM OxoidTM
- Oxoid Clostridium Difficile Selective Supplement is added to Clostridium Difficile Agar Base, Part No. CM0601B.
- Each vial supplements 500mL of medium.
Clostridium Difficile Selective Supplement, Oxoid Composition
| Vial contents (each vial is sufficient for 500mls of medium) |
per vial
|
per litre
|
| D-cycloserine |
125.0mg
|
250.0mg |
| Cefoxitin |
4.0mg
|
8.0mg |
Clostridium Difficile Agar, Oxoid Preparation:
Suspend 34.5g in 500ml of distilled water and bring gently to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes. Allow to cool to 50°C and add aseptically the contents of 1 vial of Oxoid Clostridium Difficile Supplement (SR0096) reconstituted as directed, together with 7% (v/v) Defibrinated Horse Blood (SR0050). Sheep Blood (SR0051) may be used in place of Horse Blood but some strains of the organism will show a slightly reduced growth recovery. Mix well and pour into sterile Petri dishes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C no longer than 5-7 days.
Tinsdale Medium 500g
RM0.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Tinsdale Agar Base is used for the isolation and identification of Corynebacterium diphtheriae.
Tinsdale Agar Base, Oxoid Composition
| Typical Formula* |
gm/litre
|
| Proteose peptone |
20.0 |
| Yeast extract |
5.0 |
| Sodium chloride |
5.0 |
| L-cystine |
0.24 |
| Agar |
15.0
|
| pH 7.9 ± 0.2 @ 25°C |
Tinsdale Agar, Oxoid Preparation:
Suspend 9g of agar base in 200ml of distilled water. Bring to the boil and dissolve completely. DO NOT AUTOCLAVE. Allow to cool to approximately 50°C and add the contents of one vial of Oxoid Tinsdale Supplement SR0065 reconstiuted as directed. Mix throughly and pour into sterile Petri dishes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C for not more than 4 days.
Precautions
Further tests must be carried out on colonies suspected as Corynebacterium diphtheriae, including cell morphology after sub-culture to Loeffler’s Medium and examination for toxin production.
Do not incubate Tinsdale’s Agar plates in enhanced CO2 atmosphere (5-10% v/v).
N,N-Dimethylacetamide, ReagentPlus®, 99% (Sigma-Aldrich)
RM843.00Brand:
Sigma-Aldrich
General Description
CAS number: 127-19-5
Chemical Formula: CH3CON(CH3)2
Molar Mass: 87.12 g/mol
50 bp DNA Ladder, NEB
Brand:
New England Biolabs
This product is available in our Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
- Size range: 50 bp – 1350 bp
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025)
- Easy-to-identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
PEDOT:PSS, high-conductivity grade, 3.0-4.0% aqueous dispersion – Sigma-Aldrich
Price range: RM297.00 through RM1,187.00Brand:
Sigma-Aldrich
Synonyms
PEDOT:PSS, Poly(2,3-dihydrothieno-1,4-dioxin)-poly(styrenesulfonate)
CAS No
–
General Description
Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) is an organic semiconductor prepared by doping cationic poly(3,4-ethylenedioxythiophene) and poly(4-styrenesulfonate) anion. Its high electrical conductivity and good oxidation resistance make it suitable for electromagnetic shielding and noise suppression. PEDOT:PSS based polymeric films have a high transparency throughout the visible light spectrum and even in near IR and near UV regions, with virtually 100% absorption from 900-2000 nm. PEDOT provides the conduction properties and PSS forms a hydrated colloidal solution.
We are committed to bringing you Greener Alternative Products, which adhere to one or more of the 12 Principles of Green Chemistry. This product is used in energy conversion and storage, thus has been enhanced for energy efficiency. Click here for more information.
Applications
Electrical conductivity measurements herewith reported were on a film deposited by spin-coating on a clean glass, then dried (130 °C for 15 minutes on a hotplate). The layer thickness was determined by scratching the layer and measuring the profile/height of the scratch by a stylus profilometer. Electrodes for the measurement were by evaporating metal contacts (four-point probes).
PEDOT:PSS is an intrinsically conductive polymer (ICP) that can be coated on various substrates and nanostructures like fullerenes (C60) to form composites with high electrochemical properties for applications like low-cost printed electronics, optoelectronics, and polymeric solar cells. It can be used as a conductive hydrogel with polyethylene glycol-diacrylate (PEG-DA) for potential applications in tissue engineering. PEDOT:PSS also finds use in other organic electronic applications like organic thin film transistors (OTFTs) and dye sensitized solar cells (DSSCs).
Ready-to-use high conductivity coating formulation.
Virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend.
Packaging
Packaged in poly bottles
E10 Erythromycin
RM0.00Brand:
Thermo ScientificTM OxoidTM
Gentamycin 1024 M.I.C.E. (10 Pack)
RM0.00Brand:
Thermo ScientificTM OxoidTM
**This product is not available at the moment.
Effortlessly establish accurate Minimum Inhibitory Concentration (MIC) values manually using Thermo Scientific™ Oxoid™ Gentamycin M.I.C.Evaluator Strips (M.I.C.E.™).
Tryptone Soya Broth (acc. to EP/USP)
RM336.00Brand:
Thermo ScientificTM OxoidTM
Thermo Scientific™ Oxoid Tryptone Soya Broth is tested according to EP/USP.
Tryptone Soya Broth, Oxoid Composition
| Formula |
gm/litre |
| Pancreatic digest of casein |
17.0 |
| Enzymatic digest of soya bean* |
3.0 |
| Sodium chloride |
5.0 |
| Dipotassium hydrogen phosphate |
2.5 |
| Glucose |
2.5 |
| pH 7.3 ± 0.2 @ 25°C |
*Contains papain
Tryptone Soya Broth, Oxoid Preparation:
Add 30g to 1 litre of water (purified as required), mix well and distribute into final containers. Sterilise by autoclaving at 121°C for 15 minutes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium away form the light at room temperature.
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM152.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
Price range: RM395.00 through RM627.00Brand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
OEM SeaKem® LE Agarose
RM1,514.00Brand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
Applications
Content & Storage
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Brand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available
FEATURED PRODUCTS
Maximum Recovery Diluent 500g
RM231.00Brand:
Thermo ScientificTM OxoidTM
Achieve maximum recovery of microorganisms during dilution with this protective, isotonic Thermo Scientific™ Oxoid™ Maximum Recovery Diluent (Dehydrated).
Maximum Recovery Diluent combines the protective effect of peptone in the diluting solution1 with the osmotic support of physiological saline. The low peptone concentration in the diluent reduces organism multiplication in the sample for at least 45 minutes during the dilution stage.
Maximum Recovery Diluent, Oxoid Composition
| Typical Formula* |
gm/litre |
| Peptone |
1.0 |
| Sodium chloride |
8.5 |
| pH 7.0 ± 0.2 @ 25°C |
Maximum Recovery Diluent, Oxoid Preparation:
Dissolve 9.5g in 1 litre of distilled water. Dispense into the final containers and sterilise by autoclaving at 121°C for 15 minutes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at room temperature.
N30 Neomycin
RM0.00Brand:
Thermo ScientificTM OxoidTM
Tryptone Soya Agar 500g, Oxoid
RM291.00Brand:
Thermo ScientificTM OxoidTM
Tryptone Soya Agar, Oxoid (dehydrated) is suitable to grow a wide variety of microorganisms. It’s a general-purpose agar medium containing two peptones, which supports the growth of both aerobes and anaerobes, the latter being grown either in deep cultures or by incubation under anaerobic conditions. Tryptone Soya Agar is recommended as a reference medium when testing selective media to measure the degree of inhibition.
| Typical Formula |
gm/litre
|
| Pancreatic digest of casein |
15.0 |
| Enzymatic* digest of soya bean |
5.0 |
| Sodium chloride |
5.0 |
| Agar |
15.0 |
| pH 7.3 ± 0.2 @ 25°C |
*Contains papain
Preparation of Tryptone Soya Agar, Oxoid
First, you add 40g of tryptone soya agar to 1 litre of distilled water (purified as required). You can boil to dissolve the powder completely. After dissolved, you can sterilise the medium by autoclaving at 121°C for 15 minutes.
Storage Condition and Shelf Life of Tryptone Soya Agar, Oxoid
You can store the dehydrated tryptone soya agar at 10-30°C and use before the expiry date on the label or store the prepared plates of a medium at 2-8°C.
(M-CP) Agar Base 500g
RM1,539.00Brand:
Thermo ScientificTM OxoidTM
- Oxoid Membrane Clostridium Perfringens Agar Base (m-CP Agar Base) is a chromogenic medium for rapid isolation and presumptive identification of Clostridium perfringens from water samples.
- Also available: Membrane Clostridium Perfringens Selective Supplement, Part No. SR0188E.
Membrane Clostridium Perfringens (M-CP) Agar Base, Oxoid Composition
| Typical Formula * |
gm/litre
|
| Tryptose |
30.0 |
| Yeast extract |
20.0 |
| Sucrose |
5.0 |
| L-cysteine hydrochloride |
1.0 |
| Magnesium sulphate.7H2O |
0.1 |
| Agar |
15.0 |
| Bromocresol purple |
0.04 |
| pH 7.6 ± 0.2 @ 25°C |
(M-CP) Agar Base, Oxoid Preparation:
Suspend 35.55g of m-CP Agar Base in 500ml of distilled water Mix well and sterilise by autoclaving at 121°C for 15 minutes. Cool to 50°C and aseptically add the contents of one vial of m-CP Selective Supplement reconstituted as directed. Aseptically add the following sterile solutions dissolved in distilled water:
| Component | Solution Strength | Volume (ml) |
| Phenolphthalein biphosphate tetrasodium salt |
0.5% |
10.0 |
| Ferric chloride hexahydrate |
4.5% |
1.0 |
| Indoxyl b-D-glucoside |
0.75% |
4.0 |
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Prepared medium may be stored for up to 5 days at 2-8°C in the dark.
Haemophilus Testing Medium 500g
RM599.00Brand:
Thermo ScientificTM OxoidTM
- Oxoid Haemophilus Test Medium Base (HTM) is used for the susceptibility testing of Haemophilus influenzae.
- Also available HTM Supplement, Part No. SR0158E. Store at -20° to 0°C.
Haemophilus Test Medium Base (HTM), Oxoid Composition
| Typical Formula* |
gm/litre |
| Mueller-Hinton Agar |
38.0 |
| Yeast extract (specifically selected for low antagonist levels) |
5.0 |
| pH 7.3 ± 0.1 @ 25°C |
Haemophilus Test Medium (HTM), Oxoid Preparation:
Suspend 21.5g of Haemophilus Test Medium Base in 500ml of distilled water. Bring to the boil to dissolve. Sterilise by autoclaving at 121° C for 15 minutes. Cool to 50°C and aseptically add the contents of 1 vial of Haemophilus Test Medium Supplement SR0158, as directed. Mix well and pour into sterile Petri dishes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared plates of medium at 2-8°C.
When stored as directed the supplement is stable until the expiry date stated on the label.
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
2-Propanol, for analysis EMSURE® ACS,ISO,Reag. Ph Eur (Merck)
Price range: RM62.00 through RM141.00Brand:
Merck
CAS no.: 67-63-0
Grade: ACS,ISO,Reag. Ph Eur
Chemical Formula: CH₃CH(OH)CH₃
Synonym: Isopropyl alcohol, Isopropanol, iso-Propanol, IPA
Quality level: MQ300
Nickel oxide Ni(II), 99.99% trace metals basis – Sigma-Aldrich
Price range: RM800.00 through RM3,064.00Brand:
Sigma-Aldrich
Synonyms
Nickel monoxide, Nickel(II) oxide, Nickelous oxide
Cas No.
1313-99-1
Application
Nickel(II) oxide can be used for a variety of sustainable applications such as:
non-enzymatic glucose sensor[1][2]
hydrogen production[3]
dye-sensitized solar cells (DSSCs)[4]
Malt Extract Broth 500g
RM325.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Malt Extract Broth is used for the identification of yeast and molds in sterility testing.
Malt Extract Broth, Oxoid Composition
| Typical Formula* |
gm/litre |
| Malt extract |
17.0 |
| Mycological peptone |
3.0 |
| pH 5.4 ± 0.2 |
|
Malt Extract Broth, Oxoid Preparation:
Add 20g to 1 litre of distilled water. Mix well, distribute into final containers and sterilise by autoclaving at 115°C for 10 minutes. This liquid medium is recommended for the cultivation of moulds and yeasts, during tests for sterility, etc.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
Luna Universal Probe One-Step RT-qPCR Kit
Brand:
New England Biolabs
Make a simpler choice
- One product per application simplifies selection
- Convenient master mix formats and user-friendly protocols simplify reaction setup
- Non-interfering, visible tracking dye helps to eliminate pipetting errors
Experience best-in-class performance
Optimize your RT-qPCR with Luna WarmStart® Reverse Transcriptase
Taq DNA Polymerase with Standard Taq Buffer, NEB
Brand:
New England Biolabs
Taq DNA Polymerase, NEB is a thermostable DNA polymerase that possesses 5′ to 3′ polymerase activity, that makes it an excellent industry standard for PCR.
Key features of Taq DNA Polymerase, NEB:
- Isolated from a recombinant source
- Robust and reliable reaction
- Incorporates dUTP, dITP and fluorescently -labeled nucleotides
- Ideal for routine PCR applications
- Exceptional value in terms of cost per unit
- Hot start version available
Taq DNA Polymerase, NEB is supplied with 10X Standard Taq Reaction Buffer, which is detergent-free and designed to be compatible with existing assay systems.
Lzd30 Linezolid
RM0.00Brand:
Thermo ScientificTM OxoidTM
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM152.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
Price range: RM395.00 through RM627.00Brand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
OEM SeaKem® LE Agarose
RM1,514.00Brand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
Applications
Content & Storage
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Brand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available
PRODUCT CATEGORIES
OUR BRANDS
DISTRIBUTION PARTNERS
LabMal is the online distribution of life science and biotechnology products, including microbiology, molecular biology, cell biology, general lab equipment, plastic consumables, chemical, cleansing solution and protein. If you are interested in the products from our distribution partners that are not available in Labmal, please contact us at 03-8051 5106 or info@labmal.com.
