LabMal specialises in online distribution of life science products & services, lab consumables and general lab equipment.
FEATURED PRODUCTS
Fot200 Fosfomycin Trometamol
RM82.00Brand:
Thermo ScientificTM OxoidTM
BactiCard E. coli 25TST/KT
RM0.00Brand:
Thermo Scientific™ Remel™
Thermo Scientific™ Remel BactiCard E. coli is used for presumptive identification of Escherichia coli using enzyme technology.
Malt Extract Agar 500g
RM337.00Brand:
Thermo ScientificTM OxoidTM
Detect, isolate and enumerate yeasts and molds with Thermo Scientific™ Oxoid™ Malt Extract Agar (Dehydrated). Mycological peptone in the medium gives a luxuriant growth of yeasts and molds with typical morphology and pigmentation.
Malt Extract Agar, Oxoid Composition
| Typical Formula* |
gm/litre |
| Malt extract |
30.0 |
| Mycological peptone |
5.0 |
| Agar |
15.0 |
| pH 5.4 ± 0.2 |
|
Malt Extract Agar, Oxoid Preparation:
Suspend 50g in 1 litre of distilled water and boil to dissolve. Sterilise by autoclaving at 115°C for 10 minutes.
If it is desired to adjust the medium to pH 3.5, cool to 55°C and add approximately 2-3ml of 10% Lactic Acid SR0021 to 100ml Malt Extract Agar. Once acidified with lactic acid, the medium should not be re-heated.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
PEDOT:PSS, conductive grade, 1.3 wt. % aqueous dispersion – Sigma-Aldrich
RM1,317.00Brand:
Sigma-Aldrich
Synonyms
PEDOT:PSS, Poly(2,3-dihydrothieno-1,4-dioxin)-poly(styrenesulfonate)
CAS No
–
General Description
A conducting polymer such as poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate) anions (PEDOT/PSS) is widely used in various organic optoelectronic devices. High electrical conductivity and good oxidation resistance of such polymers make it suitable for electromagnetic shielding and noise suppression. Thus, the polymer film was found to possess high transparency throughout the visible light spectrum and even into near IR and near UV regions, virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend. Impact of small electric and magnetic fields on the polymer was studied.
We are committed to bringing you Greener Alternative Products, which adhere to one or more of the 12 Principles of Green Chemistry. This product is used in energy conversion and storage, thus has been enhanced for energy efficiency. Click here for more information.
Applications
PEDOT:PSS polymeric films have been used as a charge dissipation layer in electron-beam lithography and focused ion beam milling. Sample preparation has been reported to be easier and quicker for various substrates, including gallium nitride (GaN) on sapphire (Al2O3) substrates, zinc oxide (ZnO), fused silica, lithium niobate (LiNbO3), silicon carbide (SiC) and diamond (C), spin-coated onto the ITO coated glass substrate. PEDOT: PSS layers have also been reported to be used as anode buffer layer for organic solar cells and as replacements for the transparent conductive coatings of organic solar cells. Various studies report the use of metal modified conductive grade PEDOT: PSS as an anode buffer layer in solar cells, example: copper phthalocyanine/fullerene-based solar cells 4 Conductive PEDOT:PSS combined with polyvinylidene fluoride (PVDF) membranes may be used to prepare PEDOT:PSS-PVDF ionic liquid soft actuators. The function of PEDOT:PSS as a pseudocapacitive material was investigated.
Virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend.
Features & Benefits
Antistat coating for plastic and glass.
Packaging
Packaged in glass bottles
Ampicillin Selective Supplement 1 x 10 Vials
RM479.00Brand:
Thermo ScientificTM OxoidTM
- Oxoid Ampicillin Selective Supplement is used for the isolation of Aeromonas hydrophila.
- Add to to Aeromonas Medium Base, Part No. CM0833B.
Ampicillin Selective Supplement, Oxoid Preparation:
Suspend 29.5g in 500ml of distilled water. Bring gently to the boil. DO NOT AUTOCLAVE. Cool to 50°C and aseptically add one vial of Ampicillin Selective Supplement SR0136 reconsituted as directed. Mix well and pour plates.
| Vial contents (each vial is sufficient for 500 ml of medium) | per vial | per litre |
| Ampicillin |
2.5mg |
5.0mg |
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared plates of medium 2-8°C.
Amoxycillin/Clavulanic Acid 256 M.I.C.E. 10pk
RM0.00Brand:
Thermo ScientificTM OxoidTM
**This product is not available at the moment.
Effortlessly establish accurate Minimum Inhibitory Concentration (MIC) values manually using Thermo Scientific™ Oxoid™ Amoxycillin/ Clavulanic acid M.I.C.Evaluator Strips (M.I.C.E.™).
gelONE Gel Documentation System with built in touch screen
RM0.00Brand:
Cleaver Scientific
The gelONE is the ultimate in simplicity, with automated acquisition through an intuitive touch screen interface. Compatible with both traditional DNA stains and safe stains, the gelONE is suitable for any lab. 5 Megapixel camera gives excellent low light sensitivity for clear resolution of closely spaced DNA bands and ensures even low levels of fluorescence are detected. The 20 x 24 cm imaging area means even large gels can be imaged with ease. Images are captured using the built in software, and saved direct to USB memory stocks for transfer to PC. The geneQUANT advanced image analysis package is included with all systems license free.
Key application includes:
DNA – Image Agarose gels stained with EtBr, SYBR stains and runSAFE
AutoRads – the gelONE™ high resolution camera makes it ideal for capturing Autorads
Visible Light – Image Coomassie stained gels, tissues, slides and films
Product Includes: gelONE Imaging System, UV Transilluminator, UV filter, software USB with gelQUANT software, power cable and Instruction manuals
Please contact us for pricing and availability.
Titanium dioxide, mixture of rutile and anatase nanoparticles, <150 nm particle size - Sigma-Aldrich
Price range: RM522.00 through RM1,713.00Brand:
Sigma-Aldrich
Synonyms
Titania, Titanium(IV) oxide, mixture of rutile and anatase, Titanium dioxide
CAS No
13463-67-7
General Description
Titanium(IV) oxide, mixture of rutile and anatase (TiO2) is a titania based nanoparticle solution that is dispersed in water.
Application
TiO2 suspensions can be used for a variety of applications such as:
- photo-catalytic applications
- cosmetics, textile, and paints
- fabrication of flexible humidity sensors
Trichrome Stain,Wheatley BTL/250ml
RM2,411.00Brand:
Thermo Scientific™ Remel™
Thermo Scientific™ Remel Trichrome is for detection and differentiation of intestinal parasites.
McFarland Turb Standard 2.0
RM443.00Brand:
Thermo Scientific™ Remel™
- Thermo Scientific™ Remel McFarland Equivalence Turbidity Standard is packaged in plastic case with a visual comparison card.
- Tube size is 15 x 103mm and fits in most spectrophotometers.
- Polystyrene technology allows longer shelf life.
Etp10 Ertapenem
RM80.00Brand:
Thermo ScientificTM OxoidTM
Simmons Citrate Agar 500g
RM333.00Brand:
Thermo ScientificTM OxoidTM
Simmons Citrate Agar (Dehydrated), Oxoid Composition
| Typical Formula* |
gm/litre |
| Magnesium sulphate |
0.2 |
| Ammonium dihydrogen phosphate |
0.2 |
| Sodium ammonium phosphate |
0.8 |
| Sodium citrate, tribasic |
2.0 |
| Sodium chloride |
5.0 |
| Bromothymol blue |
0.08 |
| Agar |
15.0 |
| pH 7.0 ± 0.2 @ 25°C |
|
Simmons Citrate Agar (Dehydrated), Oxoid Preparation:
Suspend 23g in 1 litre of distilled water. Bring to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
Precautions
It is important not to carry over any nutrients into the citrate medium because this will result in false positive tests. Dilute the inoculum in saline before inoculating the citrate medium to avoid a carry-over of other carbon sources.
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM143.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
Price range: RM395.00 through RM627.00Brand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
OEM SeaKem® LE Agarose
RM1,514.00Brand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
Applications
Content & Storage
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Brand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available
FEATURED PRODUCTS
Fot200 Fosfomycin Trometamol
RM82.00Brand:
Thermo ScientificTM OxoidTM
BactiCard E. coli 25TST/KT
RM0.00Brand:
Thermo Scientific™ Remel™
Thermo Scientific™ Remel BactiCard E. coli is used for presumptive identification of Escherichia coli using enzyme technology.
Malt Extract Agar 500g
RM337.00Brand:
Thermo ScientificTM OxoidTM
Detect, isolate and enumerate yeasts and molds with Thermo Scientific™ Oxoid™ Malt Extract Agar (Dehydrated). Mycological peptone in the medium gives a luxuriant growth of yeasts and molds with typical morphology and pigmentation.
Malt Extract Agar, Oxoid Composition
| Typical Formula* |
gm/litre |
| Malt extract |
30.0 |
| Mycological peptone |
5.0 |
| Agar |
15.0 |
| pH 5.4 ± 0.2 |
|
Malt Extract Agar, Oxoid Preparation:
Suspend 50g in 1 litre of distilled water and boil to dissolve. Sterilise by autoclaving at 115°C for 10 minutes.
If it is desired to adjust the medium to pH 3.5, cool to 55°C and add approximately 2-3ml of 10% Lactic Acid SR0021 to 100ml Malt Extract Agar. Once acidified with lactic acid, the medium should not be re-heated.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
PEDOT:PSS, conductive grade, 1.3 wt. % aqueous dispersion – Sigma-Aldrich
RM1,317.00Brand:
Sigma-Aldrich
Synonyms
PEDOT:PSS, Poly(2,3-dihydrothieno-1,4-dioxin)-poly(styrenesulfonate)
CAS No
–
General Description
A conducting polymer such as poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate) anions (PEDOT/PSS) is widely used in various organic optoelectronic devices. High electrical conductivity and good oxidation resistance of such polymers make it suitable for electromagnetic shielding and noise suppression. Thus, the polymer film was found to possess high transparency throughout the visible light spectrum and even into near IR and near UV regions, virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend. Impact of small electric and magnetic fields on the polymer was studied.
We are committed to bringing you Greener Alternative Products, which adhere to one or more of the 12 Principles of Green Chemistry. This product is used in energy conversion and storage, thus has been enhanced for energy efficiency. Click here for more information.
Applications
PEDOT:PSS polymeric films have been used as a charge dissipation layer in electron-beam lithography and focused ion beam milling. Sample preparation has been reported to be easier and quicker for various substrates, including gallium nitride (GaN) on sapphire (Al2O3) substrates, zinc oxide (ZnO), fused silica, lithium niobate (LiNbO3), silicon carbide (SiC) and diamond (C), spin-coated onto the ITO coated glass substrate. PEDOT: PSS layers have also been reported to be used as anode buffer layer for organic solar cells and as replacements for the transparent conductive coatings of organic solar cells. Various studies report the use of metal modified conductive grade PEDOT: PSS as an anode buffer layer in solar cells, example: copper phthalocyanine/fullerene-based solar cells 4 Conductive PEDOT:PSS combined with polyvinylidene fluoride (PVDF) membranes may be used to prepare PEDOT:PSS-PVDF ionic liquid soft actuators. The function of PEDOT:PSS as a pseudocapacitive material was investigated.
Virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend.
Features & Benefits
Antistat coating for plastic and glass.
Packaging
Packaged in glass bottles
Ampicillin Selective Supplement 1 x 10 Vials
RM479.00Brand:
Thermo ScientificTM OxoidTM
- Oxoid Ampicillin Selective Supplement is used for the isolation of Aeromonas hydrophila.
- Add to to Aeromonas Medium Base, Part No. CM0833B.
Ampicillin Selective Supplement, Oxoid Preparation:
Suspend 29.5g in 500ml of distilled water. Bring gently to the boil. DO NOT AUTOCLAVE. Cool to 50°C and aseptically add one vial of Ampicillin Selective Supplement SR0136 reconsituted as directed. Mix well and pour plates.
| Vial contents (each vial is sufficient for 500 ml of medium) | per vial | per litre |
| Ampicillin |
2.5mg |
5.0mg |
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared plates of medium 2-8°C.
Amoxycillin/Clavulanic Acid 256 M.I.C.E. 10pk
RM0.00Brand:
Thermo ScientificTM OxoidTM
**This product is not available at the moment.
Effortlessly establish accurate Minimum Inhibitory Concentration (MIC) values manually using Thermo Scientific™ Oxoid™ Amoxycillin/ Clavulanic acid M.I.C.Evaluator Strips (M.I.C.E.™).
gelONE Gel Documentation System with built in touch screen
RM0.00Brand:
Cleaver Scientific
The gelONE is the ultimate in simplicity, with automated acquisition through an intuitive touch screen interface. Compatible with both traditional DNA stains and safe stains, the gelONE is suitable for any lab. 5 Megapixel camera gives excellent low light sensitivity for clear resolution of closely spaced DNA bands and ensures even low levels of fluorescence are detected. The 20 x 24 cm imaging area means even large gels can be imaged with ease. Images are captured using the built in software, and saved direct to USB memory stocks for transfer to PC. The geneQUANT advanced image analysis package is included with all systems license free.
Key application includes:
DNA – Image Agarose gels stained with EtBr, SYBR stains and runSAFE
AutoRads – the gelONE™ high resolution camera makes it ideal for capturing Autorads
Visible Light – Image Coomassie stained gels, tissues, slides and films
Product Includes: gelONE Imaging System, UV Transilluminator, UV filter, software USB with gelQUANT software, power cable and Instruction manuals
Please contact us for pricing and availability.
Titanium dioxide, mixture of rutile and anatase nanoparticles, <150 nm particle size - Sigma-Aldrich
Price range: RM522.00 through RM1,713.00Brand:
Sigma-Aldrich
Synonyms
Titania, Titanium(IV) oxide, mixture of rutile and anatase, Titanium dioxide
CAS No
13463-67-7
General Description
Titanium(IV) oxide, mixture of rutile and anatase (TiO2) is a titania based nanoparticle solution that is dispersed in water.
Application
TiO2 suspensions can be used for a variety of applications such as:
- photo-catalytic applications
- cosmetics, textile, and paints
- fabrication of flexible humidity sensors
Trichrome Stain,Wheatley BTL/250ml
RM2,411.00Brand:
Thermo Scientific™ Remel™
Thermo Scientific™ Remel Trichrome is for detection and differentiation of intestinal parasites.
McFarland Turb Standard 2.0
RM443.00Brand:
Thermo Scientific™ Remel™
- Thermo Scientific™ Remel McFarland Equivalence Turbidity Standard is packaged in plastic case with a visual comparison card.
- Tube size is 15 x 103mm and fits in most spectrophotometers.
- Polystyrene technology allows longer shelf life.
Etp10 Ertapenem
RM80.00Brand:
Thermo ScientificTM OxoidTM
Simmons Citrate Agar 500g
RM333.00Brand:
Thermo ScientificTM OxoidTM
Simmons Citrate Agar (Dehydrated), Oxoid Composition
| Typical Formula* |
gm/litre |
| Magnesium sulphate |
0.2 |
| Ammonium dihydrogen phosphate |
0.2 |
| Sodium ammonium phosphate |
0.8 |
| Sodium citrate, tribasic |
2.0 |
| Sodium chloride |
5.0 |
| Bromothymol blue |
0.08 |
| Agar |
15.0 |
| pH 7.0 ± 0.2 @ 25°C |
|
Simmons Citrate Agar (Dehydrated), Oxoid Preparation:
Suspend 23g in 1 litre of distilled water. Bring to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
Precautions
It is important not to carry over any nutrients into the citrate medium because this will result in false positive tests. Dilute the inoculum in saline before inoculating the citrate medium to avoid a carry-over of other carbon sources.
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM143.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
Price range: RM395.00 through RM627.00Brand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
OEM SeaKem® LE Agarose
RM1,514.00Brand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
Applications
Content & Storage
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Brand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available
PRODUCT CATEGORIES
OUR BRANDS
DISTRIBUTION PARTNERS
LabMal is the online distribution of life science and biotechnology products, including microbiology, molecular biology, cell biology, general lab equipment, plastic consumables, chemical, cleansing solution and protein. If you are interested in the products from our distribution partners that are not available in Labmal, please contact us at 03-8051 5106 or info@labmal.com.
