LabMal specialises in online distribution of life science products & services, lab consumables and general lab equipment.
FEATURED PRODUCTS
Listeria Enrichment Broth Base UVM 500g
RM547.00Brand:
Thermo ScientificTM OxoidTM
- Oxoid Listeria Enrichment Broth Base (UVM Formulation) is a two-step selective enrichment (USDA-FSIS) method.
- Also available Listeria Primary Enrichment Supplement-UVM I, Part No. SR0142E or SR0142B and Listeria Secondary Selective Enrichment Supplement-UVM II, Part No. SR0143E.
Listeria Enrichment Broth Base (UVM formulation) is to be used with the appropriate supplement for UVMI broth or UVMII broth.
Listeria Enrichment Broth Base (UVM formulation), Oxoid Composition
| Typical Formula* |
gm/litre |
| Proteose peptone |
5.0 |
| Tryptone |
5.0 |
| `Lab-Lemco’ powder |
5.0 |
| Yeast extract |
5.0 |
| Sodium chloride |
20.0 |
| Disodium hydrogen phosphate |
12.0 |
| Potassium dihydrogen phosphate |
1.35 |
| Aesculin |
1.0 |
| pH 7.4 ± 0.2 @ 25°C |
|
Listeria Enrichment Broth, Oxoid Preparation:
Suspend 27.2g in 500ml of distilled water. Sterilise by autoclaving at 121°C for 15 minutes. Cool to 50°C.
To Prepare Listeria Primary Selective Enrichment Medium (UVM I):
Aseptically add the contents of 1 vial of Listeria Primary Selective Enrichment Supplement (UVM I) SR0142 reconsituted as directed. Mix well and distribute into sterile containers.
To Prepare Listeria Secondary Selective Enrichment Medium (UVM II):
Aseptically add the contents of 1 vial of Listeria Secondary Selective Enrichment Supplement (UVM II) SR0143 reconsituted as directed. Mix well and distribute into sterile containers.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
Precautions
Note the precautions stated under Listeria Selective Medium (Oxford) CM0856 and SR0140.
Broth cultures are more dangerous than colonies on agar plates.
Store prepared medium away from light. Acriflavine can photo-oxidise to form inhibitory compounds against listeriae.
Deoxynucleotide Solution Set – 25 umol of each
RM0.00Brand:
New England Biolabs
- Enhance your PCR reaction with our ultrapure dNTPs
- Compatible with all NEB DNA polymerases in a variety of applications
- Ultrapure: ≥ 99% as determined by HPLC analysis
- Exceptional stability
Tris-(8-hydroxyquinoline) aluminum – Sigma-Aldrich
RM357.00Brand:
Sigma-Aldrich
Synonyms
8-Hydroxyquinoline aluminum salt, Alq3, Aluminum 8-hydroxyquinolinate, Aluminum oxinate, Tris-(8-hydroxyquinolinato)aluminum
Cas No.
2085-33-8
General description
Alq3 crystals exist in two isomeric states, meridional and facial isomers. A third isomeric state ( γ) was studied by X-ray diffraction, the δ-Alq3 transforms into γ-form at ~180°C. Mechanism of the Alq3 phosphorescence has been studied.
Application
Key green-light emitting and electron transport material for OLEDs.
Tungsten disulfide, nanopowder, 90 nm avg. part. size (SEM) – Sigma-Aldrich
RM566.00Brand:
Sigma-Aldrich
Synonyms
Monotungsten disulfide, Tungsten disulfide, Tungsten(IV) sulfide
Cas No.
12138-09-9
Application
Tungsten sulfide possesses a pseudo 2 dimensional structure with applications in the Petrochemical industry as a desulfurization catalyst. Tungsten Sulfide nanoparticles have drawn research interest due to their potential in solid-state lubricants; coatings and photocatalysts.
Parafilm M® All-Purpose Laboratory Film
RM129.00Brand:
VWR
Parafilm, a semi-transparent, flexible film that adheres quickly and firmly. It can be sealed to itself, culture tubes or flasks and petri dish edges.
- Waterproof sheet interwound with paper to prevent adhering
- Flexible, odourless and tasteless
- Resistant to air, gases, alcohol, acids and alkalies
Benzene Anhydrous, 99.8% – Sigma-Aldrich
RM977.00Brand:
Sigma-Aldrich
Description
CAS Number: 71-43-2
Empirical Formula: C6H6
Molecular Weight: 78.11
Synonyms: –
Assay: 99.8%
Benzene is a six-membered aromatic compound that can undergo ionization induced by superhalogens, according to ab initio calculations. This compound is a frequently used industrial solvent but is also considered an air pollutant and a powerful carcinogen.
Benzene may be used in the formation of phenyl acetate by aerobic oxidation using Pd catalyst and acetic acid as solvent, formation of phenol by hydroxylation in the presence of mesoporous carbon nitride supported on vanadium catalyst and as a solvent to prepare nanoparticles of gallium nitride (GaN) by reacting Li3N and GaCl3 at 280°C.
Lithium nickel manganese cobalt oxide, powder, <0.5 μm particle size, >98% – Sigma-Aldrich
RM1,318.00Brand:
Sigma-Aldrich
Synonyms
NMC
General Description
Lithium nickel manganese cobalt oxide (NMC) is a class of electrode material that can be used in the fabrication of lithium-ion batteries. Lithium-ion batteries consist of anode, cathode, and electrolyte with a charge-discharge cycle. These materials enable the formation of greener and sustainable batteries for electrical energy storage.
We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product has been enhanced for energy efficiency. Find details here.
Applications
NMC is a novel lithium insertion electrode material for advanced lithium-ion batteries. Mn doping significantly increases the thermal stability besides increasing the electrochemical charge-discharge behavior.
NMC111 (lithium nickel-manganese-cobalt oxide with a stoichiometry of 1:1:1) is a promising cathode material used in advanced lithium-ion batteries, particularly for electric vehicle applications, due to its high energy density and long cycle life. NMC111 powder has a layered crystal structure that enables efficient, reversible lithium-ion diffusion, which is essential for good electrochemical performance. Manganese doping improves the thermal stability of the material while enhancing its electrochemical charge-discharge behavior. Compared to other NMC materials, NMC111 has a higher thermal stability and is less prone to thermal runaway, making it a safer option for battery applications.
Features & Benefits
Our NMC111 has engineered improvements over other LiNMC materials including thermal stability and high conductivity:
- More Reliable
- Longer Cycle Life
- Bulk and Pilot Scale Available
Legal Information
Product of Engi-Mat Co.
OmniPAGE Mini
Brand:
Cleaver Scientific
Cleaver Scientific Mini Vertical systems are predominantly used for protein electrophoresis. They include the OmniPAGE CVS10TETRAD systems equipped with enough combs and glass plates to run 4 gels, and the standard OmniPAGE CVS10 systems, which accommodate up to 2 handcast or commercial precast gels.
Dimethyl Sulfoxide, Anhydrous, ≥99.9% (Sigma-Aldrich)
RM657.00 – RM1,844.00Price range: RM657.00 through RM1,844.00Brand:
Sigma-Aldrich
Description
CAS number: 67-68-5
Linear Formula: (CH3)2SO
Molecular Weight 78.13
Synonym: DMSO
General description
Dimethyl Sulfoxide (DMSO) is an apolar protic solvent that is generally used as a reaction medium and reagent in organic reactions.
Application
Dimethyl Sulfoxide may be used as an oxidant for the conversion of isonitriles into isocyanates. DMSO activated by oxalyl chloride can be used in the oxidation of long-chain alcohols to carbonyls.
Desoxycholate Citrate Agar 500g
RM609.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Desoxycholate Citrate Agar is a differential medium for enumeration of coliforms and the isolation of enteric pathogens.
Desoxycholate Citrate Agar, Oxoid Composition
| Typical Formula* |
gm/litre |
| Lab-Lemco’ powder |
5.0 |
| Peptone |
5.0 |
| Lactose |
10.0 |
| Sodium citrate |
5.0 |
| Sodium thiosulphate |
5.0 |
| Ferric citrate |
1.0 |
| Sodium desoxycholate |
2.5 |
| Neutral red |
0.025 |
| Agar |
15.0 |
| pH 7.0 ± 0.2 |
Desoxycholate Citrate Agar, Oxoid Preparation:
Suspend 48.5g in 1 litre of distilled water. With frequent agitation bring to the boil over a gauze and flame to dissolve completely. Mix well and pour plates immediately. Dry the agar surface before use.
THIS MEDIUM IS HEAT SENSITIVE. AVOID EXCESSIVE OR PROLONGED HEATING DURING RECONSTITUTION. DO NOT AUTOCLAVE, OR REMELT.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared agar plates at 2-8°C.
Precautions
The medium is best used freshly prepared.
Stock cultures of Shigella species may become predominantly in the R-phase when subcultured away from DCA media. Such cultures are difficult to use for control purposes without first heavily streaking the cultures on DCA plates and picking off the few S-phase colonies i.e. the macro-colonies on the agar surface, for further subculture.
When making biochemical tests on colonies picked from the surface of DCA plates, purity subcultures should be carried out because the colony may be contaminated with Escherichia coli present as micro-colonies.
Glutathione, Certified Reference Material (Sigma-Aldrich)
RM628.00Brand:
Sigma-Aldrich
Description
CAS number: 70-18-8
Chemical Formula: H2NCH(CO2H)CH2CH2CONHCH(CH2SH)CONHCH2CO2H
Molar Mass: 307.32g/mol
Synonyms: γ-L-Glutamyl-L-cysteinyl-glycine, L-Glutathione reduced, GSH
Amino Acid Sequence
γ-Glu-Cys-Gly
General description
Glutathione (GSH) is the most important nonprotein thiol widely distributed in animal tissues, plants, and microorganisms. GSH is also a key determinant of redox signalling and protection against oxidative stress.
Pharmaceutical secondary standards for application in quality control, provide pharma laboratories and manufacturers with a convenient and cost-effective alternative to the preparation of in-house working standards.
Application
HPLC: suitable
Gas Chromatography (GC): suitable
These Secondary Standards are qualified as Certified Reference Materials. These are suitable for use in several analytical applications including but not limited to pharma release testing, pharma method development for qualitative and quantitative analyses, food and beverage quality control testing, and other calibration requirements.
May be used at 5-10 mM to elute glutathione S-transferase (GST) from glutathione agarose.
Biochem/physiol Actions
Endogenous antioxidant that plays a major role in reducing reactive oxygen species formed during cellular metabolism and the respiratory burst. Glutathione-S-transferase catalyzes the formation of glutathione thioethers with xenobiotics, leukotrienes, and other molecules that have an electrophilic center. Glutathione also forms disulfide bonds with cysteine residues in proteins. Via these mechanisms, it can have the paradoxical effect of reducing the efficacy of anti-cancer agents.
MacConkey Broth (Purple) (CM5a) 500g
RM517.00Brand:
Thermo ScientificTM OxoidTM
Detect coliform organisms in water and milk examination with Thermo Scientific™ Oxoid™ MacConkey Broth Purple (Dehydrated). Bromocresol purple indicator in the medium provides more sensitive and definite indications of acid production as compared to neutral red indicator and is less inhibitory to Escherichia coli. The use of bromocresol purple corresponds to the alternative formulations recommended in ‘The Bacteriological Examination of Water Supplies’ and ‘International Standard for Drinking Water’.
MacConkey Broth Purple, Oxoid Composition
| Typical Formula* |
gm/litre |
| Peptone |
20.0 |
| Lactose |
10.0 |
| Bile salts |
5.0 |
| Sodium chloride |
5.0 |
| Bromocresol purple |
0.01 |
| pH 7.4 ± 0.2 @ 25°C |
MacConkey Broth Purple, Oxoid Preparation:
To prepare single strength broth add 40g to 1 litre of distilled water. Distribute into containers fitted with fermentation (Durham) tubes. Sterilise by autoclaving at 121°C for 15 minutes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at room temperature.
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM152.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
RM424.00 – RM673.00Price range: RM424.00 through RM673.00Brand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form Brochure
OEM SeaKem® LE Agarose
RM1,514.00Brand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
- All Lonza Agarose is quality tested to certify performance
- High gel strength
- Low EEO
- Standard melting temperature
Applications
- Standard DNA/RNA Electrophoreisis
Content & Storage
- SeaKem® LE Agarose 500 g
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Brand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available

FEATURED PRODUCTS
Alkaline Peptone Water (ISO) 500g
RM328.00Brand:
Thermo ScientificTM OxoidTM
Enrich and recover Vibrio species from food and water samples with Thermo Scientific™ Oxoid™ Alkaline Saline Peptone Water (ISO) (Dehydrated), while adhering to ISO/TS 21872-1&2:2007. This medium is selective by exploiting the ability of Vibrio species to tolerate alkaline conditions and high sodium chloride levels. The peptone content provides the conditions for growth and recovery of Vibrio species, supplying vitamins, minerals, and nitrogen in the form of amino acids.
Alkaline Saline Peptone Water (ISO), Oxoid Composition
| Typical Formula * |
gm/litre
|
| Peptone |
20.0 |
| Sodium chloride |
20.0 |
| pH 6.6 ± 0.2 @ 25°C |
Alkaline Saline Peptone Water (ISO), Oxoid Preparation:
Dissolve 40g in 1 litre of distilled water. Mix well and distribute into final containers. Sterilize by autoclaving at 121°C for 15 minutes.
FastPrep®-24 Classic Instrument
RM0.00Brand:
MP Biomedicals
Description
The FastPrep-24™ Classic Instrument is a high-speed benchtop homogenizer offering the ultimate in speed and performance for the lysis of biological samples. Simultaneous homogenization of up to 24 samples takes place within 40 seconds.
The FastPrep-24™ Classic uses a unique, optimized motion to disrupt cells through the multidirectional, simultaneous beating of specialized Lysing Matrix beads on the sample material. Developed for difficult and resistant samples, the FastPrep-24™ Classic lyses thoroughly and quickly any tissues and cells and thus allows easy and reproducible isolation of stable RNA, active proteins and full-length genomic DNA.
Samples and buffers are added to a 2.0 mL Lysing Matrix tube containing specialized Lysing Matrix beads. The ergonomic design of the instrument ensures an easy loading of the sample tubes that remains securely sealed during the processing. The homogenization speed and duration times are manually programmed or accessed from onboard memory. After setting your speed and time with the touch of a button, just push “run”, and in less than a minute your samples are completely lysed!
The FastPrep-24™ Classic is the only available homogenizer with 9 interchangeable adapters which allows a unique versatility in sample number, size and temperature conditions. All optional adapters stand stable on the benchtop and are commonly used as tube racks for sample storage at -20°C or -80°C.
A wide range of specialized Lysing Matrix tubes containing beads of different materials, sizes and shapes have been tailored to guarantee thorough homogenization of any sample. High performance purification kits, when used in conjunction with the FastPrep-24™ Classic, provide simple, ready-to-use methods for the release and subsequent purification of DNA, RNA and proteins.
FastPrep®-24 Classic Instrument Brochure
Please contact us for pricing and availability.
Cycloheximide from microbial, ≥94% (TLC) (Sigma-Aldrich)
RM424.00Brand:
Sigma-Aldrich
Description
CAS number: 66-81-9
Chemical Formula: C15H23NO4
Molar Mass: 281.35 g/mol
Synonyms: 3-[2-(3,5-Dimethyl-2-oxocyclohexyl)-2-hydroxyethyl]glutarimide, Actidione, Naramycin A
Application
In yeast strains, cycloheximide has been used as a protein synthesis inhibitor in the cycloheximide chase experiment. It has been used to inhibit translation in mammalian cells and suppress fungal growth.
Biochem/physiol Actions
Cycloheximide (CHX) is an antibiotic produced by S. griseus. Its main biological activity is translation inhibition in eukaryotes resulting in cell growth arrest and cell death. CHX is widely used for selection of CHX-resistant strains of yeast and fungi, controlled inhibition of protein synthesis for detection of short-lived proteins and super-induction of protein expression, and apoptosis induction or facilitation of apoptosis induction by death receptors.
Sodium Chloride Peptone Broth (Buffered) 500g
RM321.00Brand:
Thermo ScientificTM OxoidTM
Carry out microbial limit testing by harmonized methodology of pharmaceutical products in accordance with USP/EP/BP/JP with Thermo Scientific™ Oxoid™ Buffered Sodium Chloride Peptone Solution (Dehydrated). The combination of phosphate buffer, sodium chloride and peptone increases the viability of sensitive microorganisms by providing an isotonic environment. This is of particular importance when trying to recover cells that may be stressed or sensitive to osmotic pressure.
Buffered Sodium Chloride Peptone Solution (Dehydrated), Oxoid Composition
| ypical Formula |
gm/litre |
| Potassium dihydrogen phosphate |
3.56 |
| Disodium hydrogen phosphate anhydrous |
5.77† |
| Sodium chloride |
4.3 |
| Peptone (meat) |
1.0 |
| pH 7.0 ± 0.2 @ 25°C |
Buffered Sodium Chloride Peptone Solution (Dehydrated), Oxoid Preparation:
Suspend 14.63g of Sodium Chloride Peptone Broth (Buffered) in 1 litre of water (purified as required). If required, add 1-10ml Tween® 20 or 80 per litre of medium. Mix well and distribute into final containers. Sterilize by autoclaving at 121°C for 15 minutes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store prepared media at room temperature.
Monarch® Total RNA Miniprep Kit
RM0.00Brand:
New England Biolabs
Quickly and easily purify up to 100 µg of high quality total RNA from multiple sample types – all with Monarch Total RNA Miniprep kit!
- For use with blood, cells and tissues
- Also works with tough to lyse samples (bacteria, yeast, plant)
- Effectively purifies total RNA of all sizes, including small RNAs >20 nt
- Efficient genomic DNA removal (column and DNase I-based)
- Contains Proteinase K for processing of tissues and blood samples
- Includes RNA Protection Reagent for sample preservation
- Excellent value
- Kit components available separately
** You may also interest in RNA Purification from Buccal Swabs, Nasopharyngeal Samples (swab or aspirate) and Saliva using the Monarch Total RNA Miniprep Kit.
Buffer tablets pH 6.8, Merck
RM409.00Brand:
Merck
Description
Buffer tablets with a pH of 6.8 are recommended for the preparation of buffer solutions according to WEISE for the staining of blood smears. These tablets are used to make buffer solutions and pH-buffered staining solutions, specifically phosphate buffer solutions, which are commonly used in hematology. They are also used to dilute staining solutions and rinse stained samples during the staining process.
100 buffer tablets are sufficient for preparing 100 liters of buffer solution, and each solution can remain stable for up to four weeks. The buffer tablets according to WEISE are in vitro diagnostic products that are CE registered.
Ot30 Oxytetracycline
RM84.00Brand:
Thermo ScientificTM OxoidTM
TRI Reagent® for processing tissues, cells cultured in monolayer or cell pellets (Sigma-Aldrich)
RM1,343.00Brand:
Sigma
Description:
Synonyms : DNA/RNA/protein extraction reagent, DNA/RNA/protein isolation reagent, DNA/RNA/protein purification reagent, TRI Reagent® cell pellet solution, cell pellet RNA extraction, cell pellet RNA isolation, cell pellet RNA purification, single step RNA extraction reagent, single step RNA isolation reagent, single step RNA purification reagent, total RNA extraction solution, total RNA isolation solution, total RNA purification solution, TRI Reagent® RNA Isolation Reagent.
TRI reagent® is a quick and convenient ready-to-use reagent useful for efficient total RNA extraction or for the simultaneous isolation of RNA, DNA and protein. TRI reagent® is a mixture of guanidine thiocyanate and phenol in a monophasic solution.
Homogenization or lysis of the tissue sample in TRI reagent® dissolves RNA, DNA and protein. The addition of chloroform or 1-bromo-3-chloropropane followed by centrifugation results in the separation of the mixture into three phases: an aqueous phase containing the RNA, the interphase containing DNA, and an organic phase containing proteins. Each of the components can then be isolated after separating the phases.
SARS-CoV-2 Rapid Colorimetric LAMP Assay Kit – 96 rxns
RM0.00Brand:
New England Biolabs
This product, SARS-CoV-2 Rapid Colorimetric LAMP Assay Kit (NEB) is intended for research purposes only.
- Colorimetric LAMP enables simple, visual detection (pink-to-yellow) of amplification of SARS-CoV-2 nucleic acid
- Set up reactions quickly and easily, using a simple heat source and unique WarmStart® technology
- Reduce risk of carryover contamination, with UDG and dUTP included in the master mix
- Assay targets N and E regions of the SARS-CoV-2 genome, for optimized sensitivity and specificity
- Bring confidence to your results using the provided controls
- Learn more about LAMP and other isothermal amplification methods
- Learn more about how NEB is supporting COVID-19 research
- Need assistance designing LAMP primers? Use the NEB LAMP Primer Design Tool
- Learn more about how RT-LAMP is being used for rapid COVID-19 screening
Salmonella Rapid Test Medium 500g
RM0.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Salmonella Rapid Test Elective Medium (SRTEM) is a selective enrichment broth medium specifically formulated for use with the Oxoid Salmonella Rapid Test Kit, Part No. FT0201A.
Salmonella Rapid Test Elective Medium (SRTEM), Oxoid Composition
| Typical Formula* |
gm/litre |
| Tryptone |
10.0 |
| Sodium chloride |
5.0 |
| Di-sodium hydrogen phosphate |
9.0 |
| Potassium dihydrogen phosphate |
1.5 |
| Casein |
5.0
|
| Malachite green |
0.0025
|
| pH 7.2 ± 0.2 @ 25°C |
Salmonella Rapid Test Elective Medium (SRTEM), Oxoid Preparation:
Add 61g to 1 litre of distilled water (double strength medium). Sterilize by autoclaving at 121°C for 15 minutes. Cool to 18-25°C and use as described in the Oxoid Salmonella Rapid Test (Code FT0201) instruction leaflet.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at room temperature.
Tin(II) iodide, AnhydroBeads™, −10 mesh, 99.99% trace metals basis (Sigma-Aldrich)
RM1,062.00 – RM3,314.00Price range: RM1,062.00 through RM3,314.00Brand:
Sigma-Aldrich
Synonyms
Stannous iodide, Tin diiodide
General Description
Tin(II) iodide AnhydroBeads™−10 mesh, 99.99% trace metals basis, comes as beads with red to purple in colour with applications in semiconductor research, solar cells, material science, chemical synthesis, catalysis, and photonics. Tin (II) iodide is widely used as a precursor to prepare lead-free, non-toxic hybrid perovskite materials. Tin-based perovskites show excellent electrical and optical properties such as high charge carrier mobility, absorption coefficient, and small exciton binding energies.
Applications
Tin(II) iodide (SnI₂) is a versatile compound with a range of applications in research, particularly in semiconductor technology, solar cells, chemical synthesis, catalysis, etc. SnI₂ is used in perovskite solar cells as a precursor for tin-based perovskites or as an additive to improve device stability and performance. The addition of a small amount of 2D tin film induces well-defined orientation and superior crystallinity in formamidinium tin iodide (FASnI3) films. This results in the longer life of charge carriers and improves the performance of the hybrid perovskite solar cell (HPSC). It can also be used to prepare solution-processable lamellar hybrid
[CH3(CH2)11NH3]SnI3semiconductor.Its catalytic properties can be leveraged to develop new synthetic methodologies such as reductions, cyclisations, and coupling reactions. It is suitable to be use in photonic applications, including sensors and photovoltaic devices. It is used as a deposition material for preparing thin films for use in electronic and optoelectronic devices. Techniques like chemical vapour deposition (CVD) and physical vapour deposition (PVD) are explored for creating high-quality films. In a study, it is found that when a novel catalytic system comprised of tin sulfide (SnS) nanoflakes as a solid catalyst and tin iodide (SnI2) as a dual-functional electrolyte additive, the Li-air battery enables operating at high current rates up to 10 000 mA g−1 (corresponding to 1 mA cm−2). Also it has been observed that that the role of the SnI2 is not only reacting with the lithium anode to provide protection but reducing the charge potential by promoting catalytic decomposition of the Li2O2.
Features & Benefits
Tin(II) iodide AnhydroBeads™, −10 mesh, 99.99% trace metals basis is designed and tested under stringent dry manufacturing conditions to ensure low water content, trace metal purity of 99.99%, and low surface area-to-volume ratio. The salt possesses excellent electrical and optical properties such as high charge carrier mobility, absorption coefficient, and small exciton binding energies. The advantages of our AnhydroBeads™ salts are as follows:
1) Reduced uptake rate of environmental moisture minimises caking, dusting, and static buildup for repeated easy handling.
2) Higher crucible packing densities and lower volatility in high-temperature solid-state procedures.
3) Easier pneumatic loading of salts to sample chambers due to fewer clogging issues associated with powdered salt counterparts.
Legal Information
AnhydroBeads is a trademark of Sigma-Aldrich Co. LLC
| CAS Number |
10294-70-9 |
| Empirical Formula |
SnI2 |
| Molecular Weight |
372.52 |
| Reaction suitability |
Core: Tin |
| Assay |
99.99% trace metals basis |
| Impurities |
≤150.0 ppm Trace Metal Analysis |
| Particle size |
−10 mesh |
Defibrinated Horse Blood (100ML)
RM0.00Brand:
Thermo ScientificTM OxoidTM
Thermo Scientific™ Oxoid Defibrinated Horse Blood is a blood product.
**This product is not available at the moment.
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM152.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
RM424.00 – RM673.00Price range: RM424.00 through RM673.00Brand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form Brochure
OEM SeaKem® LE Agarose
RM1,514.00Brand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
- All Lonza Agarose is quality tested to certify performance
- High gel strength
- Low EEO
- Standard melting temperature
Applications
- Standard DNA/RNA Electrophoreisis
Content & Storage
- SeaKem® LE Agarose 500 g
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Brand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available
PRODUCT CATEGORIES
DISTRIBUTION PARTNERS
LabMal is the online distribution of life science and biotechnology products, including microbiology, molecular biology, cell biology, general lab equipment, plastic consumables, chemical, cleansing solution and protein. If you are interested in the products from our distribution partners that are not available in Labmal, please contact us at 03-8051 5106 or info@labmal.com.












