LabMal specialises in online distribution of life science products & services, lab consumables and general lab equipment.
FEATURED PRODUCTS
n-Hexane EMPLURA® (Merck)
RM0.00Brand:
Merck
Description
CAS number: 110-54-3
Linear Formula: CH₃(CH₂)₄CH₃
Molecular Weight 86.18 g/mol
EMPLURA® is our low-cost alternative to high-purity qualities. With EMPLURA® we offer a range of solvents for a plurality of basic applications in non-regulated industries and for less demanding applications, preparative laboratory work and cleaning purposes. EMPLURA® solvents provide adequate specifications with the most important parameters.
Application
For basic applications in non-regulated industries and for less demanding applications, preparative laboratory work and cleaning purposes.
Tetracycline 256 M.I.C.E. (10 Pack)
RM0.00Brand:
Thermo ScientificTM OxoidTM
**This product is not available at the moment.
Effortlessly establish accurate Minimum Inhibitory Concentration (MIC) values manually using Thermo Scientific™ Oxoid™ Tetracycline M.I.C.Evaluator Strips (M.I.C.E.™).
VRE Broth Base 500g
RM0.00Brand:
Thermo ScientificTM OxoidTM
This product has been discontinued. Please contact us for more information.
- Oxoid VRE Broth Base (Vancomycin Resistant Enterococci Broth Base) is for selective isolation of vancomycin-resistant enterococci and high Level aminoglycoside-resistant enterococci.
- Also available Meropenem Selective Supplement, Part No. SR0184E; Gentamicin Selective Supplement, Part No. SR0185E; and Vancomycin Selective Supplement, Part No. SR0186E.
VRE Broth Base, Oxoid Composition
| Typical Formula* |
gm/litre |
| Calf brain infusion solids |
12.5 |
| Beef heart infusion solids |
5.0 |
| Proteose peptone |
10.0 |
| Glucose |
2.0 |
| Sodium chloride |
5.0 |
| Disodium phosphate |
2.5 |
| pH 7.4 ± 0.2 @ 25°C |
|
VRE Broth, Oxoid Preparation:
Suspend 37.0g of VRE Broth Base in 1 litre of distilled water. Warm to dissolve completely, sterilise by autoclaving at 121°C for 15 minutes and cool to 50°C. Supplement the medium as shown in the table below. Then mix well and distribute into final sterile containers.
|
Supplement (mg per vial) |
Reconstitution Volume Sterile distilled water |
VRE Broth (per litre) |
|
Meropenem |
2ml |
2 vials |
|
Gentamicin |
3ml |
– |
|
Vancomycin |
2ml |
– |
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Prepared medium may be stored for up to two weeks at 2-8°C in the dark.
Precautions
VRE Broth Base, VRE Agar Base , Meropenem Supplement SR0184, Gentamicin Supplement SR0185 and Vancomycin Supplement SR0186 should only be used for in vitro diagnostic purposes. Do not use any of these beyond expiry date or if the products show any signs of deterioration.
Tigecycline 256 MICE (pack of 10)
RM0.00Brand:
Thermo ScientificTM OxoidTM
**This product is not available at the moment.
Effortlessly establish accurate Minimum Inhibitory Concentration (MIC) values manually using Thermo Scientific™ Oxoid™ Tigecycline M.I.C.Evaluator Strips (M.I.C.E.™).
Salmonella Selective Supplement
RM486.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Salmonella Selective Supplement is used for the presumptive identification of Salmonella species from clinical and food samples.
- Add to Chromogenic Salmonella Agar Base, Part No. CM1007B or Brilliance™ Salmonella Agar Base, Part No. CM1092B
- Each vial supplements 500mL of medium
Salmonella Selective Supplement, Oxoid Composition
| Vial Contents (each vial is sufficient for 500ml of medium) | per vial | per litre |
| Novobiocin |
2.5mg |
5mg |
| Cefsulodin |
6mg |
12mg |
Chromogenic Salmonella Agar, Oxoid Preparation:
Suspend 25g in 500ml of distilled water and add the contents of one vial of Salmonella Selective Supplement (SR0194) reconstituted as directed. Mix well and bring to the boil with frequent agitation. DO NOT AUTOCLAVE. DO NOT HOLD AT BOILING TEMPERATURE. Cool to 50°C, mix well and pour into sterile Petri dishes.
Brilliance Salmonella Agar, Oxoid Preparation:
Suspend 27g of Brilliance Salmonella Agar Base in 500ml of distilled water. Add the contents of 1 vial of Salmonella Selective Supplement, resuspended as directed. Mix well and sterilise by bringing to the boil with frequent agitation. Cool to around 50ºC, mix well and pour into sterile Petri dishes.
NOTE: It is critical that the selective supplement is added prior to heating. When preparing volumes greater than 1 litre contact Oxoid Technical Support for directions.
Storage conditions and Shelf life
Salmonella Selective Supplement should be stored in the dark at 2-8ºC. When stored as directed, the un-opened products will remain stable until the expiry date printed on the packaging.
Cefotaxime 32 M.I.C.E. (10 Pack)
RM0.00Brand:
Thermo ScientificTM OxoidTM
**This product is not available at the moment.
Effortlessly establish accurate Minimum Inhibitory Concentration (MIC) values manually using Thermo Scientific™ Oxoid™ Cefotaxime M.I.C.Evaluator Strips (M.I.C.E.™).
Bile Salts 250g
RM832.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Bile Salts is a standardized ox-bile extract used as a selective inhibitory agent in culture media.
Lithium, granular, 99% trace metals basis – Sigma-Aldrich
Price range: RM534.00 through RM1,736.00Brand:
Sigma-Aldrich
Synonyms
Lithium atom, Lithium element
General Description
Granular lithium is a form of lithium metal that has been ground into small granules. Lithium is a soft, silver-white metal that is highly reactive and flammable. Lithium has a low density of 0.534 g/cm3, which makes it one of the lightest metals. Like the other alkali metals, lithium has a low melting point (180 °C) and is a good conductor of electricity and heat. Granular lithium is highly reactive and behaves as a strong reducing agent. It must be handled with caution due to its potential to ignite or explode. Lithium reacts readily with water and oxygen to form lithium hydroxide and lithium oxide, respectively, and even reacts with nitrogen gas at room temperature, forming lithium nitride. Typically, lithium is stored in an argon glovebox and airtight containers to prevent exposure to moisture, air, and nitrogen. To make granular lithium, the metal is first extracted from ores such as spodumene or lepidolite using a process called lithium carbonate conversion. After the lithium has been purified to a high degree of purity, it is milled into granules by rotating blades.
Lithium is a low-density alkali metal that is widely used as an anode material in rechargeable and non-rechargeable batteries. It is also used to alloy with aluminum and magnesium to make them stronger and lighter.
Applications
Lithium can be used as:
- A precursor to synthesize Li-based alloys such as LiAl and LiSi alloys, which are applicable as anode materials in the field of energy conversion and storage.
- A reducing agent in the reduction of zirconium oxide compounds in molten LiCl salt.
- As starting material to synthesize a reducing agent(1,4-bis(trimethylgermyl)-1.4-dihydropyrazine), for the fabrication of nickel metal films.
Sodium Molybdate 2H2O, AR, 500g
RM185.00Brand:
Chemiz
Description
Synonyms: Molybdic acid sodium salt dihydrate
Formula: Na2MoO4 · 2H2O
Sodium molybdate dihydrate is basic in nature. Its crystal belongs to the orthorhombic crystal system and space group Pbca. This chemical is used in various industry for corrosion inhibition as it is a non-oxidizing anodic inhibitor.
Note:
AR: Analitycal Reagent Grade: Reagents for analytical purpose or research work that need high purity.
CP: Chemically Pure Grade: Reagents for regular practical in its original purity.
Hard carbon, electrode sheet, copper substrate, size 5 in. × 10 in. – Sigma-Aldrich
RM1,299.00Brand:
Sigma-Aldrich
Synonyms
Hard carbon anode, Sodium-ion anode
General Description
Hard carbon electrode sheet is an electrode film of activated carbon cast on copper. Hard carbon is a low-density material with extremely high microporosity. Standard electrode sheets are 5 inches x 10 inches (127 mm x 254 mm) and cast single-sided on 10 µm thick copper foil current collectors. The composition of the electrode film is 90% graphite, 5% poly(vinylidene fluoride) [PVDF] and 5% Super P. PVDF acts as binder due to its thermal and electrochemical stability and strong adhesive properties.
We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product has been enhanced for energy efficiency. Click here for more information.
Application
Our hard carbon electrode sheet is a ready-to-use anode for alkali metal ion batteries such as sodium ion batteries (SIBs), lithium ion batteries (LIBs), and potassium ion batteries. Hard carbon is the anode of choice for sodium-ion batteries, where the use of graphite as an anode in SIBs is inhibited by the inability of sodium ions to form a binary graphite intercalation compound. Hard carbon offers a low insertion/deinsertion potential (~0.1 V Na/Na+) ideal for achieving high voltages. With an experimental capacity of 240 mAh/g and areal capacity of 2.32 mAh/cm2, our electrodes demonstrate outstanding electrochemical performance.
Peptone Bacteriological 500g
RM332.00Brand:
Thermo ScientificTM OxoidTM
The Oxoid Peptone Bacteriological is for use whenever a high quality bacteriological peptone is required.
- A nutritious, all-purpose peptone specially prepared for use with other refined culture media ingredients
MKTTn BROTH BASE (ISO) 500g
RM384.00Brand:
Thermo ScientificTM OxoidTM
Selectively isolate Salmonella species from food samples with Thermo Scientific™ Muller-Kauffmann Tetrathionate-Novobiocin Broth (MkTTn) for food testing in compliance with ISO 6579:2002.
Muller-Kauffmann Tetrathionate-Novobiocin Broth (MkTTn), Oxoid Composition
| Typical Formula* |
gm/litre
|
|
| Meat extract |
4.3 |
|
| Enzymatic digest of casein |
8.6 |
|
| Sodium chloride |
2.6
|
|
| Calcium carbonate |
38.7
|
|
| Sodium thiosulphate (anhydrous) |
30.5†
|
|
| Ox bile |
4.78
|
|
| Brilliant green |
0.0096
|
|
| pH 8.0 ± 0.2 @ 25°C |
|
|
Muller-Kauffmann Tetrathionate-Novobiocin Broth (MkTTn), Oxoid Preparation:
Suspend 89.5g of MKTTn in 1 litre of distilled water, mix well and bring to the boil. Cool to below 45°C. Immediately before use add 20ml of iodine-iodide solution prepared by dissolving 25g of potassium iodide in 10ml of water, adding 20g of iodine and then diluting to 100ml with sterile water. Also add the contents of four vials of Oxoid Novobiocin Selective Supplement SR0181 reconstituted as directed. Mix well and aseptically dispense into sterile containers.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared media at room temperature. The prepared medium in its final form containing iodine/iodide solution + Novobiocin Selective Supplement SR0181 should be used immediately.
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM143.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
Price range: RM395.00 through RM627.00Brand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
OEM SeaKem® LE Agarose
RM1,514.00Brand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
Applications
Content & Storage
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Brand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available
FEATURED PRODUCTS
Modified Lauryl Sulphate Tryptose Broth
RM350.00Brand:
Thermo ScientificTM OxoidTM
Selectively enrich Cronobacter spp. from milk and milk samples using Thermo Scientific™ Oxoid™ Modified Lauryl Sulphate Tryptose Broth Base (Dehydrated). Modified Lauryl Sulphate Tryptose Broth Base was originally described by Guillaume-Gentil et al. for the selective enrichment of Cronobacter spp. The high salt concentration of the medium restricts the growth of other members of Enterobacteriaceae and the combination of vancomycin and sodium lauryl sulphate inhibits the growth of Gram-positive organisms commonly isolated in production environments.
Modified Lauryl Sulphate Tryptose Broth Base, Oxoid Composition
| Typical Formula* |
gm/litre |
| Sodium Chloride |
34.0 |
| Enzymatic digest of animal and plant tissue |
20.0 |
| Lactose |
5.0 |
| Potassium dihydrogen phosphate |
2.75 |
| Dipotassium hydrogen phosphate |
2.75 |
| Sodium lauryl sulphate |
0.1 |
| pH 6.8 ± 0.2 @ 25°C |
Modified Lauryl Sulphate Tryptose Broth, Oxoid Preparation:
Dissolve 32.3g in 500ml of distilled water. Sterilize by autoclaving at 121°C for 15 minutes. Cool to approximately 50°C, and aseptically add the contents of 1 vial of Vancomycin Supplement (5mg) (SR0247E) reconstituted as directed. Mix well and aseptically dispense into sterile containers.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label
Where possible the complete medium should be prepared on the day of testing and stored for no longer than 1 day at 0-5ºC
Disk Dispenser 8 Place 90mm Skirt
RM3,287.00Brand:
Thermo ScientificTM OxoidTM
Accurately place antimicrobial susceptibility disks onto your media of choice when carrying out manual Antimicrobial Susceptibility Testing methods using a self-tamping Thermo Scientific™ Oxoid™ Antimicrobial Susceptibility Disk Dispenser.
MKTTn BROTH BASE (ISO) 500g
RM384.00Brand:
Thermo ScientificTM OxoidTM
Selectively isolate Salmonella species from food samples with Thermo Scientific™ Muller-Kauffmann Tetrathionate-Novobiocin Broth (MkTTn) for food testing in compliance with ISO 6579:2002.
Muller-Kauffmann Tetrathionate-Novobiocin Broth (MkTTn), Oxoid Composition
| Typical Formula* |
gm/litre
|
|
| Meat extract |
4.3 |
|
| Enzymatic digest of casein |
8.6 |
|
| Sodium chloride |
2.6
|
|
| Calcium carbonate |
38.7
|
|
| Sodium thiosulphate (anhydrous) |
30.5†
|
|
| Ox bile |
4.78
|
|
| Brilliant green |
0.0096
|
|
| pH 8.0 ± 0.2 @ 25°C |
|
|
Muller-Kauffmann Tetrathionate-Novobiocin Broth (MkTTn), Oxoid Preparation:
Suspend 89.5g of MKTTn in 1 litre of distilled water, mix well and bring to the boil. Cool to below 45°C. Immediately before use add 20ml of iodine-iodide solution prepared by dissolving 25g of potassium iodide in 10ml of water, adding 20g of iodine and then diluting to 100ml with sterile water. Also add the contents of four vials of Oxoid Novobiocin Selective Supplement SR0181 reconstituted as directed. Mix well and aseptically dispense into sterile containers.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared media at room temperature. The prepared medium in its final form containing iodine/iodide solution + Novobiocin Selective Supplement SR0181 should be used immediately.
Silicon, wafer (single side polished), <100>, P-type, contains boron as dopant – Sigma-Aldrich
RM1,387.00Brand:
Sigma-Aldrich
Synonyms
Silicon element
Cas No.
7440-21-3
General Description
0 vortex defects. Etch pitch density (EPD) < 100 (cm-2). Resistivity 10-3 – 40 Ω•cm
Oxygen content: <= 1~1.8 x 1018 /cm3; Carbon content: <= 5 x 1016 /cm3; Boule diameter: 1~8 ″
We are committed to bringing you Greener Alternative Products, which belongs to one of the four categories of greener alternatives. This enabling product has been enhanced for energy efficiency. Click here for more information.
Water Plate Count Agar (ISO) 500g
RM919.00Brand:
Thermo ScientificTM OxoidTM
Numerate all culturable microorganisms from water using colony count technique with Thermo Scientific™ Oxoid™ Water Plate Count Agar (Dehydrated). This nutritious, non-selective medium conforms to ISO 6222: 1999 (E) Water quality ― Enumeration of culturable microorganisms ― Colony count by inoculation in a nutrient agar culture medium1.
Water Plate Count Agar (Dehydrated), Oxoid Composition
| Typical Formula* |
gm/litre |
| Tryptone |
6.0 |
| Yeast Extract |
3.0 |
| Agar |
15.0 |
| pH 7.2 ± 0.2 @ 25°C |
|
Water Plate Count Agar (Dehydrated), Oxoid Preparation:
Suspend 24g of Water Plate Count Agar (ISO) in 1 litre of distilled water and bring gently to the boil to dissolve. If desired, distribute volumes of 15ml to 20ml in tubes, bottles or other containers. Sterilise by autoclaving at 121°C for 15 minutes. After sterilisation, allow to cool and maintain at 45 ± 1°C using a water bath.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared plates of medium at 2-8°C.
Ot30 Oxytetracycline
RM84.00Brand:
Thermo ScientificTM OxoidTM
Ceftaroline 30ug Cpt30
RM0.00Brand:
Thermo ScientificTM OxoidTM
OneTaq 2X Master Mix with Standard Buffer
Brand:
New England Biolabs
OneTaq® DNA Polymerase is an optimized blend of Taq and Deep Vent™ DNA polymerases for use with routine and difficult PCR experiments.
- Obtain high yields across a wide range of AT / GC content
- 2X higher fidelity than Taq
- Master mix is a 2X concentrated solution containing everything needed for robust amplification
Ox1 Oxacillin
RM76.00Brand:
Thermo ScientificTM OxoidTM
Negative photoresist I – Sigma-Aldrich
RM898.00Brand:
Sigma-Aldrich
Synonyms
–
Cas No.
9003-31-0
General description
A stabilized, purified photoresist which exhibits superior resolution, adhesion, etch resistance and low pinhole density.
Available as part of Negative Photoresist kit 654892
O.G.Y.E. Selective Supplement 1 x 10 Vial
RM293.00Brand:
Thermo ScientificTM OxoidTM
Oxoid OGYE Selective Supplement (Oxytetracycline Glucose Yeast Extract) is added to Oxytetracycline Glucose Yeast Extract Agar Base, Part No. CM0545B.
- Add to Oxytetracycline Glucose Yeast Extract Agar Base, Part No. CM0545B
- Each vial supplements 500mL of medium
OGYE Selective Supplement, Oxoid Composition
| Vial contents (each vial is sufficient for 500 ml of medium) |
per vial
|
per litre
|
| Oxytetracycline (in buffered base) |
50mg |
100mg
|
OGYE Selective Medium Preparation:
Suspend 18.5g in 500ml of distilled water and bring gently to the boil to dissolve completely. Sterilise by autoclaving at 115°C for 10 minutes. Allow the medium to cool to 50°C and aseptically add the contents of one vial of Oxytetracycline GYE Selective Supplement (SR0073) reconstituted as directed. Mix thoroughly and pour into sterile Petri dishes. The pH of this medium should be 7.0±0.2 @ 25°C.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
YeastBuster® Protein Extraction Reagent (for yeast cell lysis)
RM1,125.00Brand:
Merck
Description
YeastBuster™ Protein Extraction Reagent is formulated for a fast, efficient and gentle extraction of active proteins from yeast cells. The reagent avoids harsh conditions of vigorous mechanical or chemical treatment that often result in heat degradation of target proteins. The proprietary formulation utilizes a mix of mild detergent, protein stabilization buffer, and tris(hydroxypropyl) phosphine (THP) reducing agent (THP concentrate provided separately). This powerful combination eliminates the inconsistencies associated with tedious mechanical disruption of yeast cells with glass bead abrasives, ultrasonication and pressure disruption, or enzymatic digestion with β-1,3-glucanase lytic enzymes. The reagent has been tested with Saccharomyces cerevisiae, Pichia pastoris, P. stipidis, and Schizosaccharomyces pombe strains and with plant cells.
In practice, cells are harvested by centrifugation and suspended in YeastBuster. Following a brief incubation, insoluble cell debris is removed by centrifugation, and the clarified extract is ready to use. In addition to greater total protein yields in crude extracts and recovery of enzymatically active protein, the extracts are fully compatible with GST•Bind™ and Ni-NTA His•Bind® immobilized metal affinity chromatography (IMAC) purification methods. The reagent is available in 100- and 500-ml sizes.
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM143.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
Price range: RM395.00 through RM627.00Brand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
OEM SeaKem® LE Agarose
RM1,514.00Brand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
Applications
Content & Storage
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Brand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available
PRODUCT CATEGORIES
OUR BRANDS
DISTRIBUTION PARTNERS
LabMal is the online distribution of life science and biotechnology products, including microbiology, molecular biology, cell biology, general lab equipment, plastic consumables, chemical, cleansing solution and protein. If you are interested in the products from our distribution partners that are not available in Labmal, please contact us at 03-8051 5106 or info@labmal.com.
