















LabMal specialises in online distribution of life science products & services, lab consumables and general lab equipment.
FEATURED PRODUCTS
MRSV Selective Supplement 1 x 10 Vials
RM633.00Brand:
Thermo ScientificTM OxoidTM
Oxoid MRSV Selective Supplement is used for the detection of Salmonella spp. from food and environmental samples.
- Add to MSRV Medium Base, Part No. CM0910B and Lysine Iron Agar, Modified (MLIA), Part No. CM0886B
- Each vial supplements 500mL of medium
MRSV Selective Supplement, Oxoid Composition
Vial contents (each vial is sufficient for 500ml of medium) |
per vial
|
per litre
|
Novobiocin |
10.0mg |
20.0mg
|
MSRV Medium, Oxoid Preparation:
Suspend 15.8g of MSRV Medium Base in 500ml of distilled water. Bring to the boil with frequent agitation.
DO NOT AUTOCLAVE. Cool to 50°C and aseptically add the contents of 1 vial of MSRV Selective Supplement SR0161E reconstituted with 2ml of sterile distilled water. Mix well and pour into sterile Petri dishes. Air dry at room temperature for at least one hour. (Plates may be air-dried overnight prior to storage at 2-8°C.)
Storage conditions and Shelf life
Store the selective supplement in the dark at 2-8°C and use before the expiry date on the label.
The prepared medium may be stored for up to 2 weeks at 2-8°C away from the light.
Tetrahydrofuran for analysis EMSURE® ACS,Reag. Ph Eur (Merck)
RM120.00 – RM251.00Price range: RM120.00 through RM251.00Brand:
Merck
Description
CAS number: 109-99-9
Chemical Formula: C₄H₈O
Molar Mass: 72.11 g/mol
Synonyms: THF, Tetramethylene oxide, Oxolane, Butylene oxide
EMSURE® grade solvents are suitable for a broad spectrum of classical lab applications and are frequently used in regulated and highly demanding lab applications. EMSURE® provides worldwide best and most extensive product specifications. We declare our EMSURE® range to be in compliance with the ACS, with the reagent part of the European Pharmacopoeia (Reag. Ph Eur) and also with the ISO standards.
Product Specification and MSDS for Tetrahydrofuran EMSURE® (Merck).
STAA Selective Supplement
RM0.00Brand:
Thermo ScientificTM OxoidTM
Oxoid STAA Selective Supplement is used for the isolation of Brochothrix thermosphacta from food samples.
- Add to STAA Agar Base, Part No. CM0881B
- Each vial supplements 500mL of medium
STAA Selective Supplement, Oxoid Composition
Vial contents: (each vial is sufficient for 500ml of medium) |
per vial
|
per litre
|
Streptomycin sulphate |
250.0mg
|
500.0mg |
Thallous acetate |
25.0mg
|
50.0mg |
Cycloheximide |
25.0mg
|
50.0mg |
STAA Selective Medium Preparation:
Suspend 18.5g of STAA Agar Base in 500ml distilled water and bring gently to the boil to dissolve completely. Add 7.5g of glycerol and sterilise by autoclaving at 121° C for 15 minutes. Cool to 50°C and aseptically add the contents of 1 vial of STAA Selective Supplement SR0151 reconstituted as directed.
Storage conditions and Shelf life
Store the selective supplement in the dark at 2-8°C and use before the expiry date on the label.
The prepared medium may be stored for up to 2 weeks at 2-8°C.
Precautions
STAA Selective Supplement SR0151 contains cycloheximide and thallous acatate and is toxic if swallowed, inhaled or if in contact with skin.
n-Octane for Synthesis (Merck)
RM204.00Brand:
Merck
Description
CAS Number: 111-65-9
Chemical Formula: CH₃(CH₂)₆CH₃
Molecular Weight: 114.23 g/mol
Quality Level: MQ200
Prl100 Piperacillin
RM80.00Brand:
Thermo ScientificTM OxoidTM
Quick-Load 1 kb Extend DNA Ladder – 125 gel lanes
RM0.00Brand:
New England Biolabs
- Size range: 0.5 kb to 48.5 kb
- Convenient, ready-to-load format
- Formulated with bromophenol blue dye
- Easy to identify reference bands
- Suitable for 125 gel lanes
Mtz50 Metronidazole
RM0.00Brand:
Thermo ScientificTM OxoidTM
V.R.B.A. (IDF) 500g
RM571.00Brand:
Thermo ScientificTM OxoidTM
Isolate and enumerate coliforms in food, animal feed and environmental samples with Thermo Scientific™ Oxoid™ Violet Red Bile Lactose Agar (VRBL) (ISO) (Dehydrated), while adhering to ISO 4832:2006 and ISO/TS 11133-2:2003. Due to the careful addition of selective inhibitory components, neutral red, crystal violet, and bile salts, the medium provides selectivity against non-target Gram-positive bacteria.
Violet Red Bile Lactose Agar (VRBL) (ISO) (Dehydrated), Oxoid Composition
Typical Formula* |
gm/ litre |
Peptone |
7.0 |
Yeast extract |
3.0 |
Bile salts No. 3 |
1.5 |
Sodium chloride |
5.0 |
Neutral red |
0.03 |
Crystal violet |
0.002 |
Lactose |
10.0 |
Agar |
12.0 |
pH 7.4 ± 0.2 @ 25°C |
Violet Red Bile Lactose Agar (VRBL) (ISO) (Dehydrated), Oxoid Preparation:
Suspend 38.5g of VRBL Agar (ISO) dehydrated medium in 1 litre of distilled water. Bring to the boil while mixing. Continue to boil for up to 2 minutes or for the minimum time necessary to dissolve completely. DO NOT AUTOCLAVE. Cool to 44-47°C and use within 4 hours. Mix well before pouring.
Storage conditions and Shelf life
VRBL Agar (ISO) should be stored in the tightly capped original container at 10-30°C. When stored as directed, the un-opened product will remain stable until the expiry date printed on the packaging.
Locally prepared VRBL Agar (ISO) plates can be stored for up to 2 weeks when made from CM0968 according to the manufacturer’s instructions and stored at 2-8°C, out of direct sunlight. A longer shelf life may be attainable, but should be validated under the relevant, local manufacturing and storage conditions.
Precautions
VRBL Agar (ISO) should be prepared, cooled to 44-47°C and used within 4 hours.
VRBL Agar (ISO) is for laboratory use only. Do not use the dehydrated medium beyond the stated expiry date or if the product shows any sign of deterioration.
Andrades Peptone Water 500g
RM430.00Brand:
Thermo ScientificTM OxoidTM
This product has been discontinued. The alternative to this product is Peptone Water.
Oxoid Peptone Water Andrade’s is a nutrient base containing Andrade’s indicator to which carbohydrates and other diagnostic reagents may be added for use in fermentation studies.
Peptone Water Andrade’s, Oxoid Composition
Typical Formula * |
gm/litre
|
Peptone |
10.0 |
Sodium chloride |
5.0 |
Andrade’s Indicator (acid-Fuchsin) |
0.1 |
pH 7.4 ± 0.2 @ 25°C |
Peptone Water Andrade’s, Oxoid Preparation:
Suspend 15 g in 1 litre of distilled water. Mix well to dissolve, distribute into tubes or bottles, containing Durham tubes and sterilize by autoclaving at 121°C for 15 minutes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium in the dark at room temperature.
Heating Blocks for Dry Bath Incubators, Model 03-4221 and 03-4222
Brand:
Biologix
This item is not available at the moment. Please contact us for more information.
Characteristics
Various interchangeable heating blocks are available for Elite Dry Bath Incubator (One/Dual Block Unit) model# 03-4221/03-4222.
Heating Blocks for Dry Bath Incubators, Model 03-4221 and 03-4222Brochure
Brilliance Cronobacter Sakazakii Agar (DFI) 500g
RM3,303.00Brand:
Thermo ScientificTM OxoidTM
Differentiate and enumerate Cronobacter sakazakii from infant formula and other food samples with Thermo Scientific™ Brilliance™ Cronobacter Sakazakii Agar (Dehydrated). A chromogenic substrate present in the medium detects a-glucosidase reaction in Cronobacter sakazakii. The enzyme a-glucosidase, present in Cronobacter sakazakii, hydrolyses the substrate producing blue-green colonies on this pale yellow medium.
Brilliance Cronobacter Sakazakii Agar, Oxoid Composition
Typical Formula * |
gm/litre |
Tryptone |
15.0
|
Soya peptone |
5.0
|
Sodium chloride |
5.0
|
Ferric ammonium citrate |
1.0
|
Sodium desoxycholate |
1.0
|
Sodium thiosulphate |
1.0
|
Chromogen |
0.1
|
Agar |
15.0 |
Final pH 7.3 ± 0.2 @ 25°C |
Brilliance Cronobacter Sakazakii Agar, Oxoid Preparation:
Suspend 43.1g of Brilliance Cronobacter sakazakii Agar in 1 litre of distilled water. Mix well and bring to the boil to dissolve completely. Sterilize by autoclaving at 121°C for 15 minutes. Cool the medium to 50°C. Mix well and pour into sterile Petri dishes.
Storage conditions and Shelf life
The dehydrated medium should be stored at 10-30°C and used before the expiry date on the label.
Prepared medium may be stored for up to 2 weeks at 2-8°C.
Potato Dextrose Broth 500g
RM314.00Brand:
Thermo ScientificTM OxoidTM
Thermo Scientific™ Oxoid Potato Dextrose Broth is a general broth for yeasts and molds.
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM143.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
RM395.00 – RM627.00Price range: RM395.00 through RM627.00Brand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form Brochure
OEM SeaKem® LE Agarose
RM1,514.00Brand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
- All Lonza Agarose is quality tested to certify performance
- High gel strength
- Low EEO
- Standard melting temperature
Applications
- Standard DNA/RNA Electrophoreisis
Content & Storage
- SeaKem® LE Agarose 500 g
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Brand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available

FEATURED PRODUCTS
Fot200 Fosfomycin Trometamol
RM82.00Brand:
Thermo ScientificTM OxoidTM
BactiCard E. coli 25TST/KT
RM0.00Brand:
Thermo Scientific™ Remel™
Thermo Scientific™ Remel BactiCard E. coli is used for presumptive identification of Escherichia coli using enzyme technology.
Malt Extract Agar 500g
RM337.00Brand:
Thermo ScientificTM OxoidTM
Detect, isolate and enumerate yeasts and molds with Thermo Scientific™ Oxoid™ Malt Extract Agar (Dehydrated). Mycological peptone in the medium gives a luxuriant growth of yeasts and molds with typical morphology and pigmentation.
Malt Extract Agar, Oxoid Composition
Typical Formula* |
gm/litre |
Malt extract |
30.0 |
Mycological peptone |
5.0 |
Agar |
15.0 |
pH 5.4 ± 0.2 |
|
Malt Extract Agar, Oxoid Preparation:
Suspend 50g in 1 litre of distilled water and boil to dissolve. Sterilise by autoclaving at 115°C for 10 minutes.
If it is desired to adjust the medium to pH 3.5, cool to 55°C and add approximately 2-3ml of 10% Lactic Acid SR0021 to 100ml Malt Extract Agar. Once acidified with lactic acid, the medium should not be re-heated.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
PEDOT:PSS, conductive grade, 1.3 wt. % aqueous dispersion – Sigma-Aldrich
RM1,317.00Brand:
Sigma-Aldrich
Synonyms
PEDOT:PSS, Poly(2,3-dihydrothieno-1,4-dioxin)-poly(styrenesulfonate)
CAS No
–
General Description
A conducting polymer such as poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate) anions (PEDOT/PSS) is widely used in various organic optoelectronic devices. High electrical conductivity and good oxidation resistance of such polymers make it suitable for electromagnetic shielding and noise suppression. Thus, the polymer film was found to possess high transparency throughout the visible light spectrum and even into near IR and near UV regions, virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend. Impact of small electric and magnetic fields on the polymer was studied.
We are committed to bringing you Greener Alternative Products, which adhere to one or more of the 12 Principles of Green Chemistry. This product is used in energy conversion and storage, thus has been enhanced for energy efficiency. Click here for more information.
Applications
PEDOT:PSS polymeric films have been used as a charge dissipation layer in electron-beam lithography and focused ion beam milling. Sample preparation has been reported to be easier and quicker for various substrates, including gallium nitride (GaN) on sapphire (Al2O3) substrates, zinc oxide (ZnO), fused silica, lithium niobate (LiNbO3), silicon carbide (SiC) and diamond (C), spin-coated onto the ITO coated glass substrate. PEDOT: PSS layers have also been reported to be used as anode buffer layer for organic solar cells and as replacements for the transparent conductive coatings of organic solar cells. Various studies report the use of metal modified conductive grade PEDOT: PSS as an anode buffer layer in solar cells, example: copper phthalocyanine/fullerene-based solar cells 4 Conductive PEDOT:PSS combined with polyvinylidene fluoride (PVDF) membranes may be used to prepare PEDOT:PSS-PVDF ionic liquid soft actuators. The function of PEDOT:PSS as a pseudocapacitive material was investigated.
Virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend.
Features & Benefits
Antistat coating for plastic and glass.
Packaging
Packaged in glass bottles
Ampicillin Selective Supplement 1 x 10 Vials
RM479.00Brand:
Thermo ScientificTM OxoidTM
- Oxoid Ampicillin Selective Supplement is used for the isolation of Aeromonas hydrophila.
- Add to to Aeromonas Medium Base, Part No. CM0833B.
Ampicillin Selective Supplement, Oxoid Preparation:
Suspend 29.5g in 500ml of distilled water. Bring gently to the boil. DO NOT AUTOCLAVE. Cool to 50°C and aseptically add one vial of Ampicillin Selective Supplement SR0136 reconsituted as directed. Mix well and pour plates.
Vial contents (each vial is sufficient for 500 ml of medium) | per vial | per litre |
Ampicillin |
2.5mg |
5.0mg |
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared plates of medium 2-8°C.
Amoxycillin/Clavulanic Acid 256 M.I.C.E. 10pk
RM0.00Brand:
Thermo ScientificTM OxoidTM
**This product is not available at the moment.
Effortlessly establish accurate Minimum Inhibitory Concentration (MIC) values manually using Thermo Scientific™ Oxoid™ Amoxycillin/ Clavulanic acid M.I.C.Evaluator Strips (M.I.C.E.™).
gelONE Gel Documentation System with built in touch screen
Brand:
Cleaver Scientific
The gelONE is the ultimate in simplicity, with automated acquisition through an intuitive touch screen interface. Compatible with both traditional DNA stains and safe stains, the gelONE is suitable for any lab. 5 Megapixel camera gives excellent low light sensitivity for clear resolution of closely spaced DNA bands and ensures even low levels of fluorescence are detected. The 20 x 24 cm imaging area means even large gels can be imaged with ease. Images are captured using the built in software, and saved direct to USB memory stocks for transfer to PC. The geneQUANT advanced image analysis package is included with all systems license free.
Key application includes:
DNA – Image Agarose gels stained with EtBr, SYBR stains and runSAFE
AutoRads – the gelONE™ high resolution camera makes it ideal for capturing Autorads
Visible Light – Image Coomassie stained gels, tissues, slides and films
Product Includes: gelONE Imaging System, UV Transilluminator, UV filter, software USB with gelQUANT software, power cable and Instruction manuals
gelONE Gel Documentation System with in built touch screen Brochure
Please contact us for pricing and availability.
Titanium dioxide, mixture of rutile and anatase nanoparticles, <150 nm particle size - Sigma-Aldrich
RM522.00 – RM1,713.00Price range: RM522.00 through RM1,713.00Brand:
Sigma-Aldrich
Synonyms
Titania, Titanium(IV) oxide, mixture of rutile and anatase, Titanium dioxide
CAS No
13463-67-7
General Description
Titanium(IV) oxide, mixture of rutile and anatase (TiO2) is a titania based nanoparticle solution that is dispersed in water.
Application
TiO2 suspensions can be used for a variety of applications such as:
- photo-catalytic applications
- cosmetics, textile, and paints
- fabrication of flexible humidity sensors
Trichrome Stain,Wheatley BTL/250ml
RM2,411.00Brand:
Thermo Scientific™ Remel™
Thermo Scientific™ Remel Trichrome is for detection and differentiation of intestinal parasites.
McFarland Turb Standard 2.0
RM443.00Brand:
Thermo Scientific™ Remel™
- Thermo Scientific™ Remel McFarland Equivalence Turbidity Standard is packaged in plastic case with a visual comparison card.
- Tube size is 15 x 103mm and fits in most spectrophotometers.
- Polystyrene technology allows longer shelf life.
Etp10 Ertapenem
RM80.00Brand:
Thermo ScientificTM OxoidTM
Simmons Citrate Agar 500g
RM333.00Brand:
Thermo ScientificTM OxoidTM
Simmons Citrate Agar (Dehydrated), Oxoid Composition
Typical Formula* |
gm/litre |
Magnesium sulphate |
0.2 |
Ammonium dihydrogen phosphate |
0.2 |
Sodium ammonium phosphate |
0.8 |
Sodium citrate, tribasic |
2.0 |
Sodium chloride |
5.0 |
Bromothymol blue |
0.08 |
Agar |
15.0 |
pH 7.0 ± 0.2 @ 25°C |
|
Simmons Citrate Agar (Dehydrated), Oxoid Preparation:
Suspend 23g in 1 litre of distilled water. Bring to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
Precautions
It is important not to carry over any nutrients into the citrate medium because this will result in false positive tests. Dilute the inoculum in saline before inoculating the citrate medium to avoid a carry-over of other carbon sources.
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM143.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
RM395.00 – RM627.00Price range: RM395.00 through RM627.00Brand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form Brochure
OEM SeaKem® LE Agarose
RM1,514.00Brand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
- All Lonza Agarose is quality tested to certify performance
- High gel strength
- Low EEO
- Standard melting temperature
Applications
- Standard DNA/RNA Electrophoreisis
Content & Storage
- SeaKem® LE Agarose 500 g
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Brand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available
PRODUCT CATEGORIES
DISTRIBUTION PARTNERS
LabMal is the online distribution of life science and biotechnology products, including microbiology, molecular biology, cell biology, general lab equipment, plastic consumables, chemical, cleansing solution and protein. If you are interested in the products from our distribution partners that are not available in Labmal, please contact us at 03-8051 5106 or info@labmal.com.