LabMal specialises in online distribution of life science products & services, lab consumables and general lab equipment.

FEATURED PRODUCTS

Visit our shop to see amazing products.

RapID NH System KT/20

RM455.00
Brand:

Thermo Scientific™ Remel™

Identify over 30 taxa including Neisseria, Moraxella, Haemophilus, and related microorganisms in just four hours using the Thermo Scientific™ RapID™ NH System, an identification system based on enzyme technology.
Requires:
RapID Spot Indole, Part No. R8309002; RapID Nitrate A, Part No. R8309003; RapID Nitrate B Part No. R8309004; RapID Inoculation Fluid, Part No.R8325106

N-S Anaerobe Selective Supplement 1 x 10 Vials

RM0.00

This product is not available at the moment. Please contact us for more information.

Oxoid N-S Anaerobe Selective Supplement is used for the growth of fastidious and other anaerobes.

N-S Anaerobe Selective Supplement , Oxoid Composition

Vial contents (each vial is sufficient for 500 ml of medium)
per vial
per litre
Haemin

2.5mg

5.0mg

Menadione

0.25mg

0.5mg

Sodium pyruvate

500mg

1000mg

Nalidixic acid

5.0mg

10.0mg

 

Selective Medium for Non-Sporing Anaerobes Preparation:
Suspend 21.5g of Wilkins-Chalgren Anaerobe Agar (CM0619) in 475ml of distilled water containing 0.5ml `Tween 80’. Bring to the boil to dissolve completely and sterilise by autoclaving at 121°C for 15 minutes. Cool to 50-55°C and aseptically add the contents of 1 vial of N-S Anaerobe Supplement (SR0107) rehydrated as directed, together with 25ml of defibrinated blood (SR0050/SR0051). Mix gently and pour into sterile Petri dishes.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared plates of medium at 2-8°C away from light.

Reinforced Clostridial Agar 500g

RM572.00
Brand:

Thermo ScientificTM OxoidTM

Cultivate and enumerate anaerobes, especially Clostridium species, with Thermo Scientific™ Oxoid™ Reinforced Clostridial Agar (RC Agar) (Dehydrated). A solid, highly nutritious medium, it can be used as an enrichment medium to optimize the growth of clostridia and other anaerobes, lactobacilli, and many other species of bacteria.

Reinforced Clostridial Agar (RC Agar) (Dehydrated), Oxoid Composition

Typical Formula*

gm/litre

Yeast extract

3.0

`Lab-Lemco’ powder

10.0

Peptone

10.0

Glucose

5.0

Soluble starch

1.0

Sodium chloride

5.0

Sodium acetate

3.0

Cysteine hydrochloride

0.5

Agar

15.0

pH 6.8 ± 0.2 @ 25°C

 

Reinforced Clostridial Agar (RC Agar) (Dehydrated), Oxoid Preparation:
Suspend 52.5g in 1 litre of distilled water. Bring to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.

Precautions
Further identification tests must be carried out on organisms isolated from this medium.

Cfm5 Cefixime

RM0.00
Brand:

Thermo ScientificTM OxoidTM

Manually determine the antibiotic susceptibility of microorganisms using Antimicrobial Susceptibility Testing (AST) methods in conjunction with reliable, easy-to-use Thermo Scientific™ Oxoid™ Cefixime Antimicrobial Susceptibility Disks.

OCLA (ISO) Selective Supplement

RM0.00
Brand:

Thermo ScientificTM OxoidTM

This product has been discontinued, please refer to SR0257E

Thermo Scientific™ Oxoid OCLA (ISO) Selective Supplement is a selective supplement for use with Chromogenic Listeria Agar (ISO).

OCLA (ISO) Selective Supplement, Oxoid Composition

Typical Formula

SR0226E
(1 vial per 500ml
medium)

per litre
Nalidixic acid

10.0mg

20.0mg
Polymyxin B

38,350IU

76,700IU
Ceftazidime

10.0mg

20.0mg
Amphotericin

5.0mg

10.0mg

 

Modified ISO Preparation:
Suspend 34.5g of Chromogenic Listeria Agar (ISO) in 480ml of distilled water. Mix well and sterilize by autoclaving at 121°C for 15 minutes. Cool the medium to 46°C and add one vial of Chromogenic Listeria Selective Supplement (ISO), reconstituted as directed and one vial of Brilliance Listeria Differential Supplement. Mix well and pour into sterile Petri dishes.

ISO Preparation:
Suspend 34.5g of Chromogenic Listeria Agar (ISO) Base in 480ml of distilled water. Mix well and sterilise by autoclaving at 121ºC for 15 minutes. Cool the medium to around 50ºC, and add one vial of Chromogenic Listeria Selective Supplement (ISO), re-suspended as directed, and one vial of OCLA (ISO) Differential Supplement. Mix well and pour into sterile Petri dishes.

Storage conditions and Shelf life
The dehydrated medium should be stored at 10-30°C and used before the expiry date on the label.
Prepared medium may be stored for up to 2 weeks at 2-8°C.

Monarch PCR and DNA Cleanup Kit, NEB

Brand:

New England Biolabs

Quickly and easily purify high-quality DNA from PCR and other enzymatic reactions.

  • Elute in as little as 6 μl.
  • Prevent buffer retention and salt carry-over with optimized column design.
  • Save time with fast, user-friendly protocols.
  • No need to monitor pH.
  • Protocol modification allows for ssDNA purification, oligonucleotide purification, and purification of other small DNA fragments.
  • Buffers and columns available separately.
  • Significantly less plastic used when compared with other kits.
  • Responsibly-sourced and recyclable packaging.

** Tips for using Monarch PCR and DNA Cleanup Kit

CDMN Selective Supplement 1 x 10 Vials

RM1,070.00
Brand:

Thermo ScientificTM OxoidTM

Oxoid CDMN Supplement is used for the growth of Clostridium difficile.

  • Add to to C. Difficile Agar Base, Part No. CM0601B
  • Each vial for 2L medium

CDMN Selective Supplement, Oxoid Composition

Vial contents: (each vial is sufficient for 500ml of medium)

per vial

per litre
Cysteine hydrochloride

250.0mg

500.0mg

Norfloxacin

6.0mg

12.0mg

Moxalactam

16.0mg

32.0mg

 

CDMN Agar, Oxoid Preparation:
Aseptically add 2ml of sterile distilled water to one vial of supplement and mix gently to dissolve completely. Aseptically add the contents to 500ml of sterile Clostridium difficile Agar Base CM0601 cooled to approximately 50°C together with 7% (v/v) of Defibrinated Horse Blood SR0050. Mix well and pour the resulting CDMN Agar into sterile Petri dishes.

Petroleum ether 40°C-60°C AR, 2.5L

RM87.00
Brand:

Chemiz

Description

Formula: C6H14

Analytical grade petroleum ether for laboratory uses as solvent and extraction solvent.

Note:

AR: Analitycal Reagent Grade: Reagents for analytical purpose or research work that need high purity.
CP: Chemically Pure Grade: Reagents for regular practical in its original purity.

Mez75 Mezlocillin

RM0.00
Brand:

Thermo ScientificTM OxoidTM

This product has been discontinued. Please contact us for more information.
Manually determine the antibiotic susceptibility of microorganisms using Antimicrobial Susceptibility Testing (AST) methods in conjunction with reliable, easy-to-use Thermo Scientific™ Oxoid™ Mezlocillin Antimicrobial Susceptibility Disks.

Barium titanate(IV), nanopowder (cubic), 50 nm (SEM), 99.9% trace metals basis – Sigma-Aldrich

RM1,979.00
Brand:

Sigma-Aldrich

Synonyms
BaTiO3 nanoparticles, Barium titanium oxide, Barium titanium trioxide, Titanium barium oxide

Cas No.
12047-27-7

General description
This barium titanate(IV) nanopowder is a very fine white powder made of barium titanate nanoparticles with an average particle size of 50 nm. The synthesis is controlled so that the material crystallizes in the cubic polymorph, which is centrosymmetric with no spontaneous dipole.

Application
Barium Titanate is an effective lead free piezoelectric material and has been studied as a component of polymer nanocomposites and as a probe for cell imaging.

Tannic acid, ACS reagent (Sigma-Aldrich)

RM246.00
Brand:

Sigma-Aldrich

Description:

CAS number: 1401-55-4
Chemical Formula: C76H52O46
Molar Mass: 1701.20 g/mol
Synonyms: Gallotannin, Tannin

General description

Tannic acid (TA) is a natural, non-toxic organic acid with corrosion inhibitive property for metals and alloys. A chemiluminescence (CL) system of KIO4 (potassium periodate)–H2O2 (hydrogen peroxide)–Tween40 has been employed in the detection of tannic acid in industrial wastewater. Tannic acid hydrolyzes to form mainly glucose and gallic acid. Its astringent property is due to the presence of polyphenolic groups.

Application

Tannic acid may be used in the following processes:
• Synthesis of ferric tannate complexes by reacting with metallic iron.
• As a protein deproteinizing agent in genomic and plasmid DNAs preparation.
• As a reductant in the synthesis of metal nanoparticles.

Silicon, nanoparticles, 40 nm avg. part. size, ≥99% trace metals basis – Sigma-Aldrich

RM2,072.00
Brand:

Sigma-Aldrich

Synonyms
SiNPs, Silicon nanopowder

Cas no.
7440-21-3

General Description
Our 40 nm silicon nanoparticles are a high-quality, ultrafine powder with a narrow particle size of 40 nm and a high surface area (~100 m2/g). It is produced by the laser gas phase synthetic method from high-purity silane to achieve the high purity (>9=9%) and reliable particle size.

We are committed to bringing you Greener Alternative Products, which belongs to one of the four categories of greener alternatives. This product has been enhanced for energy efficency. Click here for more information.

Application
Silicon nanopowder is a promising material for use in advanced battery technologies. With its high theoretical capacity (4212 mAh/g), it has the potential to significantly improve the performance of lithium-ion batteries. The controlled particle size and high surface area of our silicon nanopowder make it an ideal candidate for use as an anode material in these batteries, allowing for improved charge and discharge rates, longer cycle life, and higher energy densities. Additionally, silicon nanopowder is being researched for use in other types of batteries, including lithium-air and lithium-sulfur batteries. Its unique properties make it a valuable material for developing next-generation battery technologies that offer higher performance, longer lifetimes, and lower costs.

Features and Benefits
Our silicon nanoparticles are designed for battery applications to extend cycle life and charge and discharge rates. We offer:

  • Low Particle Size
  • High Surface Area
  • Consistent Quality

OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L

RM152.00
Brand:

Merck

** This product has been discontinued.

OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.

It is suitable to be used in:

  • Cell Biology
    • Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
    • Diluent for live cells staining
  • Sterile solution preparation Microbiology Sample Preparation
    • Diluent and rinsing reagent in Microbial Membrane Filtration

Key Specification:

  1. Sterile by USP Standard
  2. DNase, RNase, Protease-Free
  3. < 500 ppb Total Organic Carbon
  4. < 0.025 EU/ml Bacterial Endotoxin

COA for Omnipur Sterile Water

Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form

Price range: RM395.00 through RM627.00
Brand:

Sigma-Aldrich

This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!

Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form Brochure

OEM SeaKem® LE Agarose

RM1,514.00
Brand:

Lonza

Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.

Benefits

  • All Lonza Agarose is quality tested to certify performance
  • High gel strength
  • Low EEO
  • Standard melting temperature

Applications

  • Standard DNA/RNA Electrophoreisis

Content & Storage

  • SeaKem® LE Agarose 500 g

1 kb DNA Ladder, NEB

Brand:

New England Biolabs

This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.

1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.

  • Size range: 500 bp to 10 kb
  • Value pricing
  • Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
  • Easy to identify reference bands
  • Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes

Q5 Hot Start High-Fidelity 2X Master Mix

Brand:

New England Biolabs

Fidelity at its finest

Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.

  • Highest fidelity amplification (~280X higher than Taq)
  • Ultra-low error rates
  • Superior performance for a broad range of amplicons (from high AT to high GC)
  • Hot start and master mix formats available

FEATURED PRODUCTS

Visit our shop to see amazing products.

Dermasel Agar Base 500g

RM693.00
Brand:

Thermo ScientificTM OxoidTM

  • Oxoid Dermasel Agar Base is used for primary isolation and identification of dermatophyte fungi.
  • Also available Dermasel Selective Supplement, Part No. SR0075E.

Dermasel Agar Base, Oxoid Composition

Typical Formula*

gm/litre

Mycological peptone

10.0

Glucose

20.0

Agar

14.5

pH 6.9 ± 0.2 @ 25°C

 

Dermasel Agar, Oxoid Preparation:
Suspend 44.5g in 1 litre of distilled water and heat gently to dissolve completely. Add the contents of 1 vial of Dermasel Selective Supplement SR0075, reconstituted as directed in the product insert, to each 500ml of medium to give a level of cycloheximide 0.4g/l and chloramphenicol 0.05g/l. Mix gently and sterilise by autoclaving at 121°C for 10 minutes. Avoid overheating at any time.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared agar plates at 2-8°C.

Precautions
This medium should not be used if agents causing systemic mycoses are being sought9. If such agents are suspected e.g. cryptococcushistoplasma etc., either Dermasel Agar Base without antibiotic supplement must be used in parallel or Brain Heart Infusion Agar CM0375.
If the fungal agent sought is suspected to be nutritionally fastidious, the use of Brain Heart Infusion Agar is particularly helpful.

Zinc oxide, nanopowder, <50 nm particle size (BET), >97% – Sigma-Aldrich

RM333.00
Brand:

Sigma-Aldrich

Synonyms
Zinc monoxide, Zinc white

Cas No.
1314-13-2

Application
Employed in the preparation of NaZnSiO3OH, a novel chiral framework material which has potential application in ion exchange, adsorption or catalysis.

Legal Information
Product of Engi-Mat Co.

TBX Medium 500g

RM2,238.00
Brand:

Thermo ScientificTM OxoidTM

Detect and enumerate Escherichia coli in food and animal feed samples with Thermo Scientific™ Oxoid™ Typtone Bile X-Glucuronide (TBX) Medium (Dehydrated). The medium meets the formulation and performance criterion laid down in ISO 16649 and ISO 11133:2014.

TBX Medium builds on the speed, reliability and recovery from frozen samples and detection of poor lactose fermenters offered by the original Tryptone Bile Agar, with the addition of a chromogenic agent, X-glucuronide, which detects glucuronidase activity, an enzyme shown to be highly specific for Escherichia coli.

Typtone Bile X-Glucuronide (TBX) Medium (Dehydrated), Oxoid Composition

Typical Formula* gm/litre
Tryptone 20.0
Bile Salts No. 3 1.5
Agar 15.0
X-glucuronide 0.075
pH 7.2 ± 0.2 @ 25°C

 

Typtone Bile X-Glucuronide (TBX) Medium (Dehydrated), Oxoid Preparation:
Suspend 36.6g of TBX Medium in 1 litre of distilled water. Sterilise by autoclaving at 121°C for 15 minutes. Cool to 50°C and pour the medium into sterile Petri dishes.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared plates of medium at 2-8°C.

Cft30 Ceftibuten

RM0.00
Brand:

Thermo ScientificTM OxoidTM

Manually determine the antibiotic susceptibility of microorganisms using Antimicrobial Susceptibility Testing (AST) methods in conjunction with reliable, easy-to-use Thermo Scientific™ Oxoid™ Ceftibuten Antimicrobial Susceptibility Disks.

Vitox Supplement + Rehydration Fluid (For 500 mL medium)

RM413.00
Brand:

Thermo ScientificTM OxoidTM

Oxoid Vitox Supplement is used for the preparation of Thayer Martin Medium and New York City Medium for the isolation of Neisseria spp.

  • Contents: Vitox Supplement (5 vials) plus reconstitution fluid (5 vials)
  • Add to GC Agar Base, Part No. CM0367B

Ordering Information:

  • Each vial of Vitox plus reconstitution fluid supplements 500mL of medium

Includes:

  • Five vials of Vitox plus five vials of reconstitution fluid

Vitox Supplement, Oxoid Composition

Vial contents
Vitamin B12 0.1mg
L-glutamine 100.0mg
Adenine 10.0mg
Guanine 0.3mg
p-Aminobenzoic acid 0.13mg
L-cystine 11.0mg
NAD (Coenzyme 1) 2.5mg
Cocarboxylase 1.0mg
Ferric nitrate 0.2mg
Thiamine 0.03mg
Cysteine hydrochloride 259.0mg

 

Vitox Rehydration Fluid , Oxoid Composition

Vial contents
Glucose 1.0g
Distilled water 10.0ml

 

Vitox, Oxoid Preparation:
Aseptically add one vial of Hydration Fluid to one vial of Vitox. Mix gently to dissolve completely. Aseptically add the contents of one vial to sterile medium of choice, cooled to approximately 50°C. Mix gently and pour into sterile Petri dishes.

Cholesterol Quantitation Kit (Sigma-Aldrich)

RM3,267.00
Brand:

Sigma-Aldrich

Description

Synonym: Cholesterol Assay Kit

General description

Cholesterol is an important component of mammalian cell membranes where it functions in intracellular transport, cell signalling, and maintaining membrane fluidity. Within the blood, cholesterol circulates as both the free acid and as cholesterol esters. Controlling serum cholesterol has an important therapeutic role as elevated cholesterol levels are associated with the development of atherosclerosis and cardiovascular pathologies. Recent evidence suggests a disturbance of cholesterol homeostasis contributes to the development of a chronic inflammatory state.

Cholesterol is predominantly produced in the liver. Abnormal cholesterol levels are implicated in coronary heart disease. Cholesterol is associated with breast cancer progression or inhibition. Tumour cells are capable of synthesizing their own cholesterol, which aids in cell proliferation. Increased cholesterol level is observed in cancers, especially in prostate cancer. Elevated serum cholesterol is observed in obesity.

Application

Cholesterol Quantitation Kit has been used to measure the total serum cholesterol level.

Suitability

Suitable for use with cell and tissue culture samples, urine, plasma, serum, and other biological samples.

Principle

The Cholesterol Quantitation Kit can also be used to determine the concentration of free cholesterol, cholesteryl esters, or both (total) present in a sample. In this kit, total cholesterol concentration is determined by a coupled enzyme assay, which results in a colorimetric (570 nm)/fluorometric (λex = 535/λem = 587 nm) product, proportional to the cholesterol present.

Tryptose Phosphate Broth 500g

RM492.00
Brand:

Thermo ScientificTM OxoidTM

Tryptose Phosphate Broth is recommended for the cultivation of streptococci, pneumococci, meningococci and other fastidious organisms. Tryptose Phosphate Broth with added agar and sodium azide is recommended for the isolation of pathogenic streptococci from cheese and other dairy products.

Prl75 Piperacillin

RM0.00
Brand:

Thermo ScientificTM OxoidTM

** This item is not available at the moment. Please contact us for more information.
Manually determine the antibiotic susceptibility of microorganisms using Antimicrobial Susceptibility Testing (AST) methods in conjunction with reliable, easy-to-use Thermo Scientific™ Oxoid™ Piperacillin Antimicrobial Susceptibility Disks.

PTB7, average Mw 80,000-200,000, PDI ≤3.0 – Sigma-Aldrich

RM3,783.00
Brand:

Sigma-Aldrich

Synonyms
Poly({4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b′]dithiophene-2,6-diyl}{3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophenediyl})

General Description
PTB7 is a semiconducting polymer used in organic photovoltaics with an energy efficiency of 9.15%. It can act as an electron donor with narrow optical band gaps and excellent π-π conjugation while forming a nanocomposite with fullerenes.[1][2]
We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product belongs to enabling category of greener alternatives thus aligns with “Design for energy efficency”. Hole transport organic materials allow perfect energy level alignment with the absorber layer and therefore efficient charge collection, are prone to degradation in ambient conditions.

Applications

High-Efficiency Organic Solar Cells (OPVs)
OPV Device Structure: ITO/PEDOT:PSS/PTB7 :PC71BM/Ca/Al

  • JSC = 14.9 mA/cm2
  • VOC = 0.75 V
  • FF = 0.69
  • PCE = 7.4%
It is majorly used as an active layer that enhances the overall performance by increasing the light absorption and improving the electron mobility of polymeric solar cells (PSCs).

Penicillin 32 M.I.C.E. (10 Pack)

RM0.00
Brand:

Thermo ScientificTM OxoidTM

**This product is not available at the moment.

Effortlessly establish accurate Minimum Inhibitory Concentration (MIC) values manually using Thermo Scientific™ Oxoid™ Penicillin G M.I.C.Evaluator Strips (M.I.C.E.™).

MOPS-BLEB Base (BAX-17710676)

RM1,982.00
Brand:

Thermo ScientificTM OxoidTM

Thermo Scientific™ Oxoid MOPS-BLEB Broth Base is a medium for using with BAX Listeria species.

Medical Surgical Mask, 3-ply, 50pcs

RM43.99
Brand:

Ready Stock! Ship out on the same day after order confirmation!

Shipping Charges:

1-5 boxes: RM30

6-10 boxes: RM60

10-15 boxes: RM90

Features:

  1. 3 ply
  2. Flat Mouthing Ear
  3. CE Certified
  4. Standard Used: EN 14683:2005
  5. Comfortable to wear
  6. Cover nose, mouse and chin for full protection

OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L

RM152.00
Brand:

Merck

** This product has been discontinued.

OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.

It is suitable to be used in:

  • Cell Biology
    • Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
    • Diluent for live cells staining
  • Sterile solution preparation Microbiology Sample Preparation
    • Diluent and rinsing reagent in Microbial Membrane Filtration

Key Specification:

  1. Sterile by USP Standard
  2. DNase, RNase, Protease-Free
  3. < 500 ppb Total Organic Carbon
  4. < 0.025 EU/ml Bacterial Endotoxin

COA for Omnipur Sterile Water

Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form

Price range: RM395.00 through RM627.00
Brand:

Sigma-Aldrich

This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!

Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form Brochure

OEM SeaKem® LE Agarose

RM1,514.00
Brand:

Lonza

Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.

Benefits

  • All Lonza Agarose is quality tested to certify performance
  • High gel strength
  • Low EEO
  • Standard melting temperature

Applications

  • Standard DNA/RNA Electrophoreisis

Content & Storage

  • SeaKem® LE Agarose 500 g

1 kb DNA Ladder, NEB

Brand:

New England Biolabs

This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.

1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.

  • Size range: 500 bp to 10 kb
  • Value pricing
  • Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
  • Easy to identify reference bands
  • Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes

Q5 Hot Start High-Fidelity 2X Master Mix

Brand:

New England Biolabs

Fidelity at its finest

Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.

  • Highest fidelity amplification (~280X higher than Taq)
  • Ultra-low error rates
  • Superior performance for a broad range of amplicons (from high AT to high GC)
  • Hot start and master mix formats available

PRODUCT CATEGORIES

Shop by Categories

Plastic Consumables (35)

General Lab Equipment (107)

Microbiology (704)

Molecular Biology (138)

Protein (29)

Cell Biology (24)

Chemical (159)

Cleansing (15)

OUR BRANDS

DISTRIBUTION PARTNERS

LabMal is the online distribution of life science and biotechnology products, including microbiology, molecular biology, cell biology, general lab equipment, plastic consumables, chemical, cleansing solution and protein. If you are interested in the products from our distribution partners that are not available in Labmal, please contact us at 03-8051 5106 or info@labmal.com.