LabMal specialises in online distribution of life science products & services, lab consumables and general lab equipment.
FEATURED PRODUCTS
M-Endo Agar (LES) 500g
RM487.00Brand:
Thermo ScientificTM OxoidTM
- Oxoid Membrane Endo Agar LES (m Endo AgarLES) is an APHA recommended medium for the confirmation of coliforms.
- Also available Basic Fuchsin Indicator, Part No. BR0050A.
Membrane Endo Agar LES, Oxoid Composition
| Formula |
gm/litre |
| Yeast extract | 1.2 |
| Tryptone | 3.7 |
| Peptone P | 3.7 |
| Tryptose | 7.5 |
| Lactose | 9.4 |
| Dipotassium phosphate | 3.3 |
| Monopotassium phosphate | 1.0 |
| Sodium chloride | 3.7 |
| Sodium desoxycholate | 0.1 |
| Sodium lauryl sulphate | 0.05 |
| Sodium sulphite | 1.6 |
| Agar | 10.0 |
| pH 7.2 ± 0.2 |
Membrane Endo Agar LES, Oxoid Preparation:
Suspend 45 grams in 1 litre of distilled water. Add 12ml of a 10% w/v solution of Basic Fuchsin. Heat gently with frequent agitation until the medium boils. DO NOT AUTOCLAVE. Cool to 45°C and dispense into 50-60 mm dishes in 4 ml volumes. For larger dishes use sufficient medium to give an equivalent depth (approx. 1.5 mm).
Plates should be protected from light and may be stored for up to two weeks in the refrigerator.
Storage conditions and Shelf life
Store the dehydrated medium below 25°C and use before the expiry date on the label.
Store the prepared medium in the dark and at 2-8°C.
Listeria Selective Enrich Supplement 10×2.25 Litres
RM1,628.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Listeria Selective Enrichment Supplement, Modified is used for the enrichment of Listeria spp.
- Modified with 10mg/L acriflavin
- Add to Listeria Enrichment Broth, Part No. CM0862B
- Each vial supplements 2.25L of medium
Listeria Selective Enrichment Supplement (Modified), Oxoid Composition
| Vial contents (each vial is sufficient for 2,250mls of medium) |
per vial
|
per litre
|
| Nalidixic acid |
90.0mg |
40.0mg
|
| Cycloheximide |
112.5mg |
50.0mg
|
| Acriflavine hydrochloride |
22.5mg |
10.0mg
|
Listeria Selective Enrichment Medium Preparation:
Aseptically add 10ml of distilled water to one vial and invert gently to dissolve. Add the vial contents to 2.25 litres of Listeria Enrichment Broth Base. Sterilize by autoclaving at 121°C for 15 minutes. Cool to 50°C, mix well and distribute into sterile containers in volumes as required .
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
Zinc oxide, dispersion, nanoparticles – Sigma-Aldrich
RM288.00Brand:
Sigma-Aldrich
Synonyms
Zinc monoxide, Zinc white
CAS No
1314-13-2
General Description
Zinc oxide, dispersion (ZnO) is a multi-function metal oxide with unique physio-chemical properties, which includes high chemical stability, broad range absorption spectra and high electrochemical characteristics. It can also be categorized as a semiconductor due to its high energy band width and high thermal stability that make it potentially useful in electronics and optoelectronics applications.
Features & Benefits
ZnO dispersions have piezo and pyroelectric properties that make it useful in the development of sensors, generators, and photo-catalysis. It has low toxicity and biocompatibility, which facilitate its applications in biomedicine.
Levo Plus Pipette Filler
RM0.00Brand:
Biologix
This product is not available at the moment. Please contact us for more information.
The Levo Plus pipette filler efficiently aspirates and dispenses liquids, its powerful motor filling a 25 mL pipette in less than 5 seconds. It is compatible with most standard glass and plastic pipettes with volumes ranging from 0.1 – 100 mL.
Features
• Lightweight, ergonomic design
• Convenient one-handed operation
• Eight aspiration and dispensing speeds
• LCD display shows speed settings and remaining battery life
• Efficient lithium-ion battery can last for up to 8 hours of intermittent use
• Replaceable hydrophobic 0.45 μm filter
• Integral, autoclavable silicone adapter suits use with 0.1 – 100 mL pipettes
• Can be used while charging
runSafe
Brand:
Cleaver Scientific
RunSAFE is a non-mutagenic fluorescent reagent that produces instant visualization of DNA bands upon Blue Light or UV illumination of agarose gels. Supplied in 6X DNA Loading Buffer, CSL-runSAFE is used to prepare DNA markers and samples for loading on agarose or
polyacrylamide gels. It is the most sensitive stain available for detecting the double-stranded DNA (dsDNA). It contains three tracking dyes (Bromophenol Blue, Xylene Cyanol FF, and Orange G) for visually tracking the DNA migration during the electrophoresis process. It is ideal for the environment requiring a safe , non-hazardous alternative to Ethidium Bromide. Storage Store at 4°C up to 12 months. For longer periods, store at -20°C. runSAFE Dye is light sensitive and should be stored protected from light.
W2.5 Trimethoprim
RM0.00Brand:
Thermo ScientificTM OxoidTM
F200 Nitrofurantoin
RM0.00Brand:
Thermo ScientificTM OxoidTM
Anti-Glutamate Receptor 2, extracellular, clone 6C4, Alexa Fluor® 488 Conjugate
RM2,605.00Brand:
Merck
Description
Glutamate receptors (GluRs) can be categorized as ionotropic or metabotropic and subcatergorized by their agonist preferences (NMDA, AMPA or Kainic acid). There are four types of AMPA selective GluR subunits (GluR1, GluR2, GluR3 and GluR4). Tetrameric or pentameric combinations of different subunits contributes to the functional diversity of AMPA receptors. In general, AMPA receptors mediate fast synaptic current at most excitatory synapses, with stoichiometry characterized by subtype composition. Although subunit composition of AMPA receptors varies, they must contain at least one edited GluR2 subunit to be calcium impermeable. The critical residue controlling calcium permeability is in the pore loop region. In GluR1, GluR3, and GluR4, this positionis occupied by a Gln residue. In GluR2, it is occupied by an Arg residue. It has been shown experimentally that the presence of Arg in this position blocks CA2+ ion permeability, while a Gln does not. Relative calcium permeability in AMPA receptor channels may be significant in pathological neurotoxic damage and long term changes in nervous system responses. Research focus area: Neuroscience
Key Applications:
-ELISA
-Immunocytochemistry
-Immunohistochemistry
-Immunoprecipitation
-Radioimmunoassay
-Western Blotting
Silica gel 60 (0.063-0.200 mm) for column chromatography (70-230 mesh ASTM)-Merck
RM0.00Brand:
Merck
Description
Cas Number : 7631-86-9
Molecular mass : 60.08 g/mol
Chemical formula : SiO₂
Silica gel 60 (0.063-0.200 mm) for column chromatography (70-230 mesh ASTM). CAS No. 7631-86-9, EC Number 231-545-4.
Wilkins Chalgren Anaerobe Broth 500g
RM517.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Wilkins-Chalgren Anaerobe Broth is used for the growth of anaerobes and recommended for antimicrobial susceptibility testing of anaerobes.
Cadmium Standard Solution, traceable to SRM from NIST (Merck)
RM234.00Brand:
Merck
CAS no.: 7697-37-2, 10325-94-7
Traceability: Traceable to SRM from NIST Cd(NO₃)₂ in HNO₃ 0.5 mol/l 1000 mg/l Cd Certipur®
Synonym: –
Quality level: MQ300
Product specification and SDS for Cadmium Standard Solution.
Ceftazidime 256 M.I.C.E. (10 pack)
RM0.00Brand:
Thermo ScientificTM OxoidTM
**This product is not available at the moment.
Effortlessly establish accurate Minimum Inhibitory Concentration (MIC) values manually using Thermo Scientific™ Oxoid™ Ceftazidime M.I.C.Evaluator Strips (M.I.C.E.™).
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM152.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
Price range: RM395.00 through RM627.00Brand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
OEM SeaKem® LE Agarose
RM1,514.00Brand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
Applications
Content & Storage
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Brand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available
FEATURED PRODUCTS
M-MuLV Reverse Transcriptase
Brand:
New England Biolabs
M-MuLV Reverse Transcriptase synthesizes a complementary DNA strand initiating from a primer using either RNA (cDNA synthesis) or single-stranded DNA as a template.
- Isolated from a recombinant source
- Supplied with 10X Reaction Buffer
- Tested for the absence of DNases and RNases
Lauryl Tryptose Broth 500g
RM226.00Brand:
Thermo ScientificTM OxoidTM
Detect coliform organisms in water, waste water and dairy products with selective Thermo Scientific™ Oxoid™ Lauryl Tryptose Broth (Dehydrated), while conforming to the formula detailed by American Public Health Association. Lauryl Tryptose Broth is designed to promote a rich growth and copious gas production from small inocula of coliform organisms.
Lauryl Tryptose Broth, Oxoid Composition
| Typical Formula* |
gm/litre |
| Tryptose |
20.0 |
| Lactose |
5.0 |
| Sodium chloride |
5.0 |
| Dipotassium hydrogen phosphate |
2.75 |
| Potassium dihydrogen phosphate |
2.75 |
| Sodium lauryl sulphate |
0.1 |
| pH 6.8 ± 0.2 @ 25°C |
|
Lauryl Tryptose Broth, Oxoid Preparation:
Dissolve 35.6g in 1 litre of distilled water and distribute into containers with fermentation tubes (Durham). Sterilise by autoclaving at 121°C for 15 minutes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at room temperature.
Precautions
If stored at 2-8°C the broth will become cloudy or form a precipitate. This should clear at room temperature but gas formation is the criterion of growth not turbidity.
Erythromycin 256 M.I.C.E. (10 Pack)
RM0.00Brand:
Thermo ScientificTM OxoidTM
**This product is not available at the moment.
Effortlessly establish accurate Minimum Inhibitory Concentration (MIC) values manually using Thermo Scientific™ Oxoid™ Erythromycin M.I.C.Evaluator Strips (M.I.C.E.™).
Cefotaxime 32 M.I.C.E. (10 Pack)
RM0.00Brand:
Thermo ScientificTM OxoidTM
**This product is not available at the moment.
Effortlessly establish accurate Minimum Inhibitory Concentration (MIC) values manually using Thermo Scientific™ Oxoid™ Cefotaxime M.I.C.Evaluator Strips (M.I.C.E.™).
Silicon, nanoparticles, nanoparticles, 10 nm avg. part. size, ≥99% trace metals basis, battery grade – Sigma-Aldrich
RM3,104.00Brand:
Sigma-Aldrich
Synonyms
SiNPs, Silicon nanopowder
Cas No.
7440-21-3
General Description
Our 10 nm silicon nanoparticles are a high-quality, ultrafine powder with a narrow particle size of 10 nm and a high surface area (~180 m2/g). It is produced by the laser gas phase synthetic method from high-purity silane to achieve high purity (>=99%) and a reliable particle size.
We are committed to bringing you Greener Alternative Products, which belong to one of the four categories of greener alternatives. This product has been enhanced for energy efficiency. Click here for more information.
Application
Silicon nanopowder is a promising material for use in advanced battery technologies. With its high theoretical capacity (4212 mAh/g), it has the potential to significantly improve the performance of lithium-ion batteries. The controlled particle size and high surface area of our silicon nanopowder make it an ideal candidate for use as an anode material in these batteries, allowing for improved charge and discharge rates, longer cycle life, and higher energy densities. Additionally, silicon nanopowder is being researched for use in other types of batteries, including sodium-ion and magnesium-ion batteries. Its unique properties make it a valuable material for developing next-generation battery technologies that offer higher performance, longer lifetimes, and lower costs.
Features & Benefits
Our silicon nanoparticles are designed for battery applications to extend cycle life and charge and discharge rates. We offer:
- Lowest Particle Size
- High Surface Area
- Consistent Quality
L-Ornithine Monohydrochloride for Biochemistry (Merck)
RM0.00Brand:
Merck
Description
CAS number: 3184-13-2
Linear Formula: C₅H₁₂N₂O₂ * ClH
Molecular Weight: 168.62
Synonym: L(+)-2,5-Diamino valeric acid hydrochloride
Application
L-Ornithine monohydrochloride for biochemistry.
Sodium Chloride Peptone Broth (Buffered) 500g
RM321.00Brand:
Thermo ScientificTM OxoidTM
Carry out microbial limit testing by harmonized methodology of pharmaceutical products in accordance with USP/EP/BP/JP with Thermo Scientific™ Oxoid™ Buffered Sodium Chloride Peptone Solution (Dehydrated). The combination of phosphate buffer, sodium chloride and peptone increases the viability of sensitive microorganisms by providing an isotonic environment. This is of particular importance when trying to recover cells that may be stressed or sensitive to osmotic pressure.
Buffered Sodium Chloride Peptone Solution (Dehydrated), Oxoid Composition
| ypical Formula |
gm/litre |
| Potassium dihydrogen phosphate |
3.56 |
| Disodium hydrogen phosphate anhydrous |
5.77† |
| Sodium chloride |
4.3 |
| Peptone (meat) |
1.0 |
| pH 7.0 ± 0.2 @ 25°C |
Buffered Sodium Chloride Peptone Solution (Dehydrated), Oxoid Preparation:
Suspend 14.63g of Sodium Chloride Peptone Broth (Buffered) in 1 litre of water (purified as required). If required, add 1-10ml Tween® 20 or 80 per litre of medium. Mix well and distribute into final containers. Sterilize by autoclaving at 121°C for 15 minutes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store prepared media at room temperature.
Pseudomonas Agar Base 500g
RM444.00Brand:
Thermo ScientificTM OxoidTM
Selectively isolate Pseudomonas species from a range of samples with Thermo Scientific™ Oxoid™ Pseudomonas Agar Base (Dehydrated). The medium is modification of King’s A Medium and contains magnesium chloride and potassium sulphate for improved pigment production and recovery of Pseudomonas aeruginosa while strongly suppressing Klebsiella, Proteus and Providencia spp.
Pseudomonas Agar Base (Dehydrated), Oxoid Composition
| Typical Formula* |
gm/litre |
| Gelatin peptone |
16.0 |
| Casein hydrolysate |
10.0 |
| Potassium sulphate |
10.0 |
| Magnesium chloride |
1.4 |
| Agar |
11.0 |
| pH 7.1 ± 0.2 @ 25°C |
Agar Preparation:
To Prepare the Agar Base:
Suspend 24.2g of the agar base, in 500ml of distilled water. Add 5ml of glycerol. Bring to the boil to dissolve completely, sterilise by autoclaving at 121°C for 15 minutes. Allow the medium to cool to 50°C.
To Prepare Pseudomonas CN Agar:
To 500ml of agar base cooled to 50°C add the contents of 1 vial of Pseudomonas CN Supplement (SR0102) rehydrated as directed. Mix well and pour into sterile Petri dishes.
To Prepare Pseudomonas CFC Agar:
To 500ml of agar base cooled to 50°C add the contents of 1 vial of Pseudomonas CFC Supplement (SR0103) rehydrated as directed. Mix well and pour into sterile Petri dishes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
Precautions
Fresh media should be prepared as required. Molten agar should not be kept longer than 4 hours. Medium should not be stored and remelted. If swarming colonies of Proteus species are a problem in food samples then the incubation temperature can be lowered to 20°C for a period of 3-5 days. Chilled foods may carry a wide range of pseudomonads and the colonies on CFC Medium, incubated at lower temperatures, may be Pseudomonas fluorescens or Pseudomonas putida as well as Pseudomonas aeruginosa. Aeromonas species will also appear as pink/brown colonies, particularly from fish products.
Urea CP, 500g
RM27.00Brand:
Chemiz
Description
Synonyms: Carbamide
Formula: NH2CONH2
Urea is a raw material used in the manufacture of many chemicals such as plastics and adhesives. It is highly soluble and has a pKa of almost 0.
Note:
AR: Analitycal Reagent Grade: Reagents for analytical purpose or research work that need high purity.
CP: Chemically Pure Grade: Reagents for regular practical in its original purity.
Zinc oxide, 99.99% trace metals basis – Sigma-Aldrich
RM929.00Brand:
Sigma-Aldrich
Synonyms
Zinc monoxide, Zinc white
Cas No.
1314-13-2
General Description
Zinc oxide is a multifunctional material with unique properties such as a high electrochemical coupling coefficient, high chemical stability, a broad range of radiation absorption, and biocompatibility. It is also a wide band gap (3.37 eV) semiconductor used in optoelectronics, ceramics, and laser technology. Owing to its piezo and pyroelectric properties, it can be used as a sensor, energy generator, and photocatalyst for hydrogen production.
Application
Employed in the preparation of NaZnSiO3OH, a novel chiral framework material which has potential application in ion exchange, adsorption or catalysis.
Zinc oxide can be used as a starting material to prepare:
- Schottky diodes are applied in radio-frequency energy-harvesting circuits.
- ZnO nanostructures for sensing applications. For example, it can be used to fabricate Cr2O3-ZnCr2O4 hetero-nanostructures for highly selective xylene sensors.
Lithium nickel cobalt aluminium oxide, electrode sheet, aluminum substrate, size 5 in. × 10 in. – Sigma-Aldrich
RM7,160.00Brand:
Sigma-Aldrich
Synonyms
NCA
General Description
Lithium nickel cobalt aluminium oxide (NCA) is a class of electrode material that can be used in the fabrication of lithium-ion batteries. Lithium-ion batteries consist of anode, cathode, and electrolyte with a charge-discharge cycle. These materials enable the formation of greener and sustainable batteries for electrical energy storage.
We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product has been enhanced for energy efficiency. Find details here.
Applications
NCA is Aluminum doped Lithium nickel cobalt oxide (LNCO). Al doping is found very effective to suppress the cell impedance rise by stabilizing the charge-transfer impedance on the cathode side besides increasing the thermal stability of the material. NCA shows excellent electrochemical performance.
The NCA casted electrode sheets can be cut into appropriate size and is ready to be used in lithium ion batteries.
Other Notes
Crystal Structure: Rhombohedral
Operating Condiditons:
- Recommended maximum charge voltage: 4.3 V vs Li/Li+
- Recommended maximum charge current: 4C
- Recommended cut-off voltage for discharge: 3.0 V vs Li/Li+
- Recommended charge method: constant current – constant voltage
1X and 10X TBE buffer (Tris-Borate-EDTA), Biobasic
Brand:
Bio Basic
Description
This product is currently not available. Please contact us for more information.
TBE buffer (Tris-Borate-EDTA, Biobasic) is commonly used in all DNA electrophoresis applications (both for acrylamide and for agarose gels). In general, TBE buffer offers better resolution of 0.1 to 3 kb fragments; whereas, TAE (Tris-Acetate-EDTA) buffer provides better resolution of fragments greater than 4 kb. Furthermore, TBE is better suited for high-voltage (>150V) electrophoresis because of its higher buffering capacity and lower conductivity than TAE. BIO BASIC INC. offers TBE in a number of different formats. 10X TBE liquid concentrate can be used to easily prepare a 1X TBE working solution by diluting with distilled, deionized water. 10X TBE Powder allows for the stable storage of the pre-mixed powder form that can be dissolved in distilled, deionized water to yield 1 liter each of 10X TBE buffer solution.
How to prepare a 10X TBE Buffer?
10X TBE buffer preparation is easy. Simply mix 10X TBE powder (SKU: A00269-500ml/A0026-4L) with an appropriate volume of distilled/deionized water. The 10X TBE buffer is ready to use now.
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM152.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
Price range: RM395.00 through RM627.00Brand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
OEM SeaKem® LE Agarose
RM1,514.00Brand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
Applications
Content & Storage
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Brand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available
PRODUCT CATEGORIES
OUR BRANDS
DISTRIBUTION PARTNERS
LabMal is the online distribution of life science and biotechnology products, including microbiology, molecular biology, cell biology, general lab equipment, plastic consumables, chemical, cleansing solution and protein. If you are interested in the products from our distribution partners that are not available in Labmal, please contact us at 03-8051 5106 or info@labmal.com.
