LabMal specialises in online distribution of life science products & services, lab consumables and general lab equipment.
FEATURED PRODUCTS
M-MuLV Reverse Transcriptase
Brand:
New England Biolabs
M-MuLV Reverse Transcriptase synthesizes a complementary DNA strand initiating from a primer using either RNA (cDNA synthesis) or single-stranded DNA as a template.
- Isolated from a recombinant source
- Supplied with 10X Reaction Buffer
- Tested for the absence of DNases and RNases
Lauryl Tryptose Broth 500g
RM226.00Brand:
Thermo ScientificTM OxoidTM
Detect coliform organisms in water, waste water and dairy products with selective Thermo Scientific™ Oxoid™ Lauryl Tryptose Broth (Dehydrated), while conforming to the formula detailed by American Public Health Association. Lauryl Tryptose Broth is designed to promote a rich growth and copious gas production from small inocula of coliform organisms.
Lauryl Tryptose Broth, Oxoid Composition
| Typical Formula* |
gm/litre |
| Tryptose |
20.0 |
| Lactose |
5.0 |
| Sodium chloride |
5.0 |
| Dipotassium hydrogen phosphate |
2.75 |
| Potassium dihydrogen phosphate |
2.75 |
| Sodium lauryl sulphate |
0.1 |
| pH 6.8 ± 0.2 @ 25°C |
|
Lauryl Tryptose Broth, Oxoid Preparation:
Dissolve 35.6g in 1 litre of distilled water and distribute into containers with fermentation tubes (Durham). Sterilise by autoclaving at 121°C for 15 minutes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at room temperature.
Precautions
If stored at 2-8°C the broth will become cloudy or form a precipitate. This should clear at room temperature but gas formation is the criterion of growth not turbidity.
Erythromycin 256 M.I.C.E. (10 Pack)
RM0.00Brand:
Thermo ScientificTM OxoidTM
**This product is not available at the moment.
Effortlessly establish accurate Minimum Inhibitory Concentration (MIC) values manually using Thermo Scientific™ Oxoid™ Erythromycin M.I.C.Evaluator Strips (M.I.C.E.™).
Cefotaxime 32 M.I.C.E. (10 Pack)
RM0.00Brand:
Thermo ScientificTM OxoidTM
**This product is not available at the moment.
Effortlessly establish accurate Minimum Inhibitory Concentration (MIC) values manually using Thermo Scientific™ Oxoid™ Cefotaxime M.I.C.Evaluator Strips (M.I.C.E.™).
Silicon, nanoparticles, nanoparticles, 10 nm avg. part. size, ≥99% trace metals basis, battery grade – Sigma-Aldrich
RM3,104.00Brand:
Sigma-Aldrich
Synonyms
SiNPs, Silicon nanopowder
Cas No.
7440-21-3
General Description
Our 10 nm silicon nanoparticles are a high-quality, ultrafine powder with a narrow particle size of 10 nm and a high surface area (~180 m2/g). It is produced by the laser gas phase synthetic method from high-purity silane to achieve high purity (>=99%) and a reliable particle size.
We are committed to bringing you Greener Alternative Products, which belong to one of the four categories of greener alternatives. This product has been enhanced for energy efficiency. Click here for more information.
Application
Silicon nanopowder is a promising material for use in advanced battery technologies. With its high theoretical capacity (4212 mAh/g), it has the potential to significantly improve the performance of lithium-ion batteries. The controlled particle size and high surface area of our silicon nanopowder make it an ideal candidate for use as an anode material in these batteries, allowing for improved charge and discharge rates, longer cycle life, and higher energy densities. Additionally, silicon nanopowder is being researched for use in other types of batteries, including sodium-ion and magnesium-ion batteries. Its unique properties make it a valuable material for developing next-generation battery technologies that offer higher performance, longer lifetimes, and lower costs.
Features & Benefits
Our silicon nanoparticles are designed for battery applications to extend cycle life and charge and discharge rates. We offer:
- Lowest Particle Size
- High Surface Area
- Consistent Quality
L-Ornithine Monohydrochloride for Biochemistry (Merck)
RM0.00Brand:
Merck
Description
CAS number: 3184-13-2
Linear Formula: C₅H₁₂N₂O₂ * ClH
Molecular Weight: 168.62
Synonym: L(+)-2,5-Diamino valeric acid hydrochloride
Application
L-Ornithine monohydrochloride for biochemistry.
Sodium Chloride Peptone Broth (Buffered) 500g
RM321.00Brand:
Thermo ScientificTM OxoidTM
Carry out microbial limit testing by harmonized methodology of pharmaceutical products in accordance with USP/EP/BP/JP with Thermo Scientific™ Oxoid™ Buffered Sodium Chloride Peptone Solution (Dehydrated). The combination of phosphate buffer, sodium chloride and peptone increases the viability of sensitive microorganisms by providing an isotonic environment. This is of particular importance when trying to recover cells that may be stressed or sensitive to osmotic pressure.
Buffered Sodium Chloride Peptone Solution (Dehydrated), Oxoid Composition
| ypical Formula |
gm/litre |
| Potassium dihydrogen phosphate |
3.56 |
| Disodium hydrogen phosphate anhydrous |
5.77† |
| Sodium chloride |
4.3 |
| Peptone (meat) |
1.0 |
| pH 7.0 ± 0.2 @ 25°C |
Buffered Sodium Chloride Peptone Solution (Dehydrated), Oxoid Preparation:
Suspend 14.63g of Sodium Chloride Peptone Broth (Buffered) in 1 litre of water (purified as required). If required, add 1-10ml Tween® 20 or 80 per litre of medium. Mix well and distribute into final containers. Sterilize by autoclaving at 121°C for 15 minutes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store prepared media at room temperature.
Pseudomonas Agar Base 500g
RM444.00Brand:
Thermo ScientificTM OxoidTM
Selectively isolate Pseudomonas species from a range of samples with Thermo Scientific™ Oxoid™ Pseudomonas Agar Base (Dehydrated). The medium is modification of King’s A Medium and contains magnesium chloride and potassium sulphate for improved pigment production and recovery of Pseudomonas aeruginosa while strongly suppressing Klebsiella, Proteus and Providencia spp.
Pseudomonas Agar Base (Dehydrated), Oxoid Composition
| Typical Formula* |
gm/litre |
| Gelatin peptone |
16.0 |
| Casein hydrolysate |
10.0 |
| Potassium sulphate |
10.0 |
| Magnesium chloride |
1.4 |
| Agar |
11.0 |
| pH 7.1 ± 0.2 @ 25°C |
Agar Preparation:
To Prepare the Agar Base:
Suspend 24.2g of the agar base, in 500ml of distilled water. Add 5ml of glycerol. Bring to the boil to dissolve completely, sterilise by autoclaving at 121°C for 15 minutes. Allow the medium to cool to 50°C.
To Prepare Pseudomonas CN Agar:
To 500ml of agar base cooled to 50°C add the contents of 1 vial of Pseudomonas CN Supplement (SR0102) rehydrated as directed. Mix well and pour into sterile Petri dishes.
To Prepare Pseudomonas CFC Agar:
To 500ml of agar base cooled to 50°C add the contents of 1 vial of Pseudomonas CFC Supplement (SR0103) rehydrated as directed. Mix well and pour into sterile Petri dishes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
Precautions
Fresh media should be prepared as required. Molten agar should not be kept longer than 4 hours. Medium should not be stored and remelted. If swarming colonies of Proteus species are a problem in food samples then the incubation temperature can be lowered to 20°C for a period of 3-5 days. Chilled foods may carry a wide range of pseudomonads and the colonies on CFC Medium, incubated at lower temperatures, may be Pseudomonas fluorescens or Pseudomonas putida as well as Pseudomonas aeruginosa. Aeromonas species will also appear as pink/brown colonies, particularly from fish products.
Urea CP, 500g
RM27.00Brand:
Chemiz
Description
Synonyms: Carbamide
Formula: NH2CONH2
Urea is a raw material used in the manufacture of many chemicals such as plastics and adhesives. It is highly soluble and has a pKa of almost 0.
Note:
AR: Analitycal Reagent Grade: Reagents for analytical purpose or research work that need high purity.
CP: Chemically Pure Grade: Reagents for regular practical in its original purity.
Zinc oxide, 99.99% trace metals basis – Sigma-Aldrich
RM929.00Brand:
Sigma-Aldrich
Synonyms
Zinc monoxide, Zinc white
Cas No.
1314-13-2
General Description
Zinc oxide is a multifunctional material with unique properties such as a high electrochemical coupling coefficient, high chemical stability, a broad range of radiation absorption, and biocompatibility. It is also a wide band gap (3.37 eV) semiconductor used in optoelectronics, ceramics, and laser technology. Owing to its piezo and pyroelectric properties, it can be used as a sensor, energy generator, and photocatalyst for hydrogen production.
Application
Employed in the preparation of NaZnSiO3OH, a novel chiral framework material which has potential application in ion exchange, adsorption or catalysis.
Zinc oxide can be used as a starting material to prepare:
- Schottky diodes are applied in radio-frequency energy-harvesting circuits.
- ZnO nanostructures for sensing applications. For example, it can be used to fabricate Cr2O3-ZnCr2O4 hetero-nanostructures for highly selective xylene sensors.
Lithium nickel cobalt aluminium oxide, electrode sheet, aluminum substrate, size 5 in. × 10 in. – Sigma-Aldrich
RM7,160.00Brand:
Sigma-Aldrich
Synonyms
NCA
General Description
Lithium nickel cobalt aluminium oxide (NCA) is a class of electrode material that can be used in the fabrication of lithium-ion batteries. Lithium-ion batteries consist of anode, cathode, and electrolyte with a charge-discharge cycle. These materials enable the formation of greener and sustainable batteries for electrical energy storage.
We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product has been enhanced for energy efficiency. Find details here.
Applications
NCA is Aluminum doped Lithium nickel cobalt oxide (LNCO). Al doping is found very effective to suppress the cell impedance rise by stabilizing the charge-transfer impedance on the cathode side besides increasing the thermal stability of the material. NCA shows excellent electrochemical performance.
The NCA casted electrode sheets can be cut into appropriate size and is ready to be used in lithium ion batteries.
Other Notes
Crystal Structure: Rhombohedral
Operating Condiditons:
- Recommended maximum charge voltage: 4.3 V vs Li/Li+
- Recommended maximum charge current: 4C
- Recommended cut-off voltage for discharge: 3.0 V vs Li/Li+
- Recommended charge method: constant current – constant voltage
1X and 10X TBE buffer (Tris-Borate-EDTA), Biobasic
Brand:
Bio Basic
Description
This product is currently not available. Please contact us for more information.
TBE buffer (Tris-Borate-EDTA, Biobasic) is commonly used in all DNA electrophoresis applications (both for acrylamide and for agarose gels). In general, TBE buffer offers better resolution of 0.1 to 3 kb fragments; whereas, TAE (Tris-Acetate-EDTA) buffer provides better resolution of fragments greater than 4 kb. Furthermore, TBE is better suited for high-voltage (>150V) electrophoresis because of its higher buffering capacity and lower conductivity than TAE. BIO BASIC INC. offers TBE in a number of different formats. 10X TBE liquid concentrate can be used to easily prepare a 1X TBE working solution by diluting with distilled, deionized water. 10X TBE Powder allows for the stable storage of the pre-mixed powder form that can be dissolved in distilled, deionized water to yield 1 liter each of 10X TBE buffer solution.
How to prepare a 10X TBE Buffer?
10X TBE buffer preparation is easy. Simply mix 10X TBE powder (SKU: A00269-500ml/A0026-4L) with an appropriate volume of distilled/deionized water. The 10X TBE buffer is ready to use now.
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM152.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
Price range: RM395.00 through RM627.00Brand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
OEM SeaKem® LE Agarose
RM1,514.00Brand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
Applications
Content & Storage
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Brand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available
FEATURED PRODUCTS
Supercoiled DNA Ladder – 100 gel lanes
RM0.00Brand:
New England Biolabs
The Supercoiled DNA ladder contains 9 proprietary supercoiled plasmids, ranging in size from 2 to 10 kb, that are suitable for use as supercoiled molecular weight standards for agarose electrophoresis. The 5 kb plasmid has an increased intensity to serve as a reference band.
- Recommended gel percentage range: 0.6-1%
- Optimum separation on 0.8%
- Recommended migration conditions: no more than 5V/cm (distance between electrodes), for no more than 60 minutes
Hoyle Medium Base 500g
RM685.00Brand:
Thermo ScientificTM OxoidTM
- Oxoid Hoyle Medium Base is used for isolation and differentiation of Corynebacterium diphtheriae Types.
- Requires addition of Potassium Tellurite 3.5%, Part No. SR0030J
Hoyle Medium Base, Oxoid Composition
| Typical Formula* |
gm/litre |
| `Lab-Lemco’ powder |
10.0 |
| Peptone |
10.0 |
| Sodium chloride |
5.0 |
| Agar |
15.0 |
| pH 7.8 ± 0.2 @ 25°C |
|
Hoyle Medium, Oxoid Preparation:
Suspend 40g in 1 litre of distilled water and bring to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes. Cool to 55°C and add 50ml of Laked Horse Blood SR0048 and 10ml of 3.5% Potassium Tellurite solution SR0030, mix, and pour plates.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared plates at 2-8°C.
Precautions
It should be noted that not all corynebacteria produce the typical colonies described above – so in all cases it is advisable to use Hoyle medium in conjunction with the additional media and tests mentioned above.
Plant Preservative Mixture (PPM), Plant Cell Technology
Price range: RM700.00 through RM5,071.00Brand:
Plant Cell Technology
Plant Preservative Mixture (PPM), is a broad-spectrum biocide/ for plant tissue culture. PPM™ is the ultimate solution to the never-ending struggle against microbial airborne, waterborne and endogenous contamination.
PPM™ is a heat-stable preservative/biocide which can be used to effectively prevent or reduces microbial contamination in plant tissue culture.
At optimum doses, PPM™, which stands for Plant Preservative Mixture™, is an extremely effective Preservative/Biocide, yet does not impair in vitro seed germination, callus proliferation and callus regeneration.
PPM™ prevents the germination of both bacteria and fungi spores. It is heat stable and therefore can be autoclaved with the media.
PPM™ can be, and should be used as a standard ingredient in plant tissue culture media, and is also substantially less expensive than commonly used antibiotics.
While PPM™ was principally designed to inhibit airborne contamination, waterborne contamination and contamination introduced from human contact, it can also — in many cases — be used to reduce endogenous contamination.
Despite the most stringent use of sterile techniques, the contamination of plant cell and plant tissue cultures remains a persistent problem that can result in losses ranging from small number of cultures to the loss of whole batches.
Color Prestained Protein Standard, Broad Range (10-250 kDa)
Brand:
New England Biolabs
The Color Prestained Protein Standard, Broad Range is a mixture of highly pure, recombinant, prestained proteins, covalently coupled with a blue chromophore, and two reference bands (one orange and one green at 72 kDa and 26 kDa, respectively), that resolves into 11 sharp bands when electrophoresed.
- Allows approximate molecular weight determination when performing SDS-PAGE analysis
- Applications include verification of Western transfer efficiency on membranes and fluorescent imaging of SDS-PAGE
- Direct loading, additional loading buffer and heat incubation not required
- Recombinant proteins with no detectable protease contaminating activities
- Optimal stability for up to 24 months
Soy Peptone 400g
RM455.00Brand:
Thermo ScientificTM OxoidTM
Thermo Scientific™ Oxoid Soy Peptone is obtained by the hydrolysis of soya flour and complies with the USP specification.
ReBlot Plus Antibody Stripping Solution, 10x
Brand:
Merck
Description
ReBlot™ Plus reagents efficiently strip probed blots of
bound antibodies. ReBlot™ Plus reagents are available
in two formulations, “Mild” and “Strong”.
• Re-Blot™ Plus Mild Stripping Solution – Provides
good results on both nitrocellulose and PVDF
membranes.
• Re-Blot™ Plus Strong Stripping Solution –
Performs when membranes with high signal are
to be stripped, or use when Re-Blot™ Plus Mild
treatment is not sufficient.
Key Benefits
• β-Mercaptoethanol-free to avoid pungent smells
• Room temperature stripping in only 15 minutes
• Fast reuse of blots for multiple antibody probings
• Non-acidic, for less risk of protein degradation
(such as in Edman degradation)
Kf30 Cephalothin
RM0.00Brand:
Thermo ScientificTM OxoidTM
Manually determine the antibiotic susceptibility of microorganisms using Antimicrobial Susceptibility Testing (AST) methods in conjunction with reliable, easy-to-use Thermo Scientific™ Oxoid™ Cephalothin Antimicrobial Susceptibility Disks.
Zinc Oxide, CP, 500g
RM29.00Brand:
Chemiz
Description
Formula: ZnO
Zinc oxide has a variety of uses including rubber and ceramic glaze manufacture, UV absorber, paint corrosion inhibitor and as nutrient supplement.
Note:
AR: Analitycal Reagent Grade: Reagents for analytical purpose or research work that need high purity.
CP: Chemically Pure Grade: Reagents for regular practical in its original purity.
Corning® CoolCell™ FTS30 (Sigma-Aldrich)
RM3,399.00Brand:
Sigma
Description
CoolCelll FTS30 utilizes a solid state core and controlled microconvection technology to evenly draw in -80°C freezer air through a bottom base vent, uniformly disperse the cold air around each vial in the central chamber and then release the thermal load from the vials through a top vent choke. The inner vial module holds 30 cryogenic vials and can be removed in one step. Each vial achieves a uniform and reproducible -1°C/minute freezing profile and thermal profiles are highly reproducible. Due to the low thermal mass of the uniform-density cross-linked polyethylene foam container, freezing can be conducted without a rise in local freezer temperature, thereby protecting nearby samples.
Application :
-For 30 standard 1.0 mL to 2.0 mL cryogenic vials.
-Controlled micro-convection for uniform freezing of 30 vials.
-Removable vial tray for one-step transfer of samples into and out of freezing chamber.
J029 – 500ml Spray Plastic Bottle (PET)
RM4.50Description
This Spray Plastic Bottle is manufactured from high-quality PET (Polyethylene Terephthalate), this spray bottle offers exceptional chemical resistance, reliability, and convenience for a wide range of laboratory applications.
- Capacity: 500ml – ideal for dispensing liquids in moderate to large quantities for laboratory experiments, chemical mixing, and cleaning procedures.
- Durable Material: Constructed with PET, providing resistance to many common lab chemicals and solvents without degradation or cracking.
- Leak-Proof Design: The secure nozzle and cap system ensures that the bottle is leak-proof, making it safe for use with various volatile or hazardous liquids.
- Transparent Body: The clear design allows easy visualization of liquid levels, providing accuracy and preventing overfilling.
- Ergonomic Spray Nozzle: Perfect for precise, controlled dispensing of solutions, cleaning agents, or even biological samples.
- Chemical Resistance: This bottle can withstand most laboratory-grade chemicals, disinfectants, and cleaning agents, ensuring it remains durable and functional.
- On/Off Spray Control: J029 Spray Bottle features an on/off spray nozzle, allowing you to easily control when the bottle sprays or to prevent accidental spraying. This is especially useful when you need to transport the bottle or store it without worrying about leakage or unintentional misting.
Half Fraser Selective Supplement 10 x 2.5L
RM0.00Brand:
Thermo ScientificTM OxoidTM
- Oxoid Half Fraser Supplement is used for the enrichment of Listeria species.
- Add to Fraser Broth Base, Part No. CM0895B.
Half Fraser Supplement, Oxoid Composition
| Vial contents |
SR0166G
per vial
|
per litre
(before sample addition)
|
| Ferric ammonium citrate |
1.125g |
500mg |
| Nalidixic acid |
22.5mg |
10.0mg |
| Acriflavine hydrochloride | 28.125mg |
12.5mg |
Fraser Broth, Oxoid Preparation:
Suspend 129.0g of Fraser Broth in 2.25 litres of distilled water, and mix well to dissolve completely Sterilise by autoclaving at 121°C for 15 minutes. Cool to below 50°C, and aseptically add the contents of one vial of Half Fraser Selective Supplement SR0166G reconstituted as directed in the product insert. Mix well and distribute into sterile containers.
Storage conditions and Shelf life
Store the selective supplement in the dark at 2-8°C and use before the expiry date on the label.
The prepared medium may be stored for up to 2 weeks at 2-8°C.
Salmonella Selective Supplement
RM486.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Salmonella Selective Supplement is used for the presumptive identification of Salmonella species from clinical and food samples.
- Add to Chromogenic Salmonella Agar Base, Part No. CM1007B or Brilliance™ Salmonella Agar Base, Part No. CM1092B
- Each vial supplements 500mL of medium
Salmonella Selective Supplement, Oxoid Composition
| Vial Contents (each vial is sufficient for 500ml of medium) | per vial | per litre |
| Novobiocin |
2.5mg |
5mg |
| Cefsulodin |
6mg |
12mg |
Chromogenic Salmonella Agar, Oxoid Preparation:
Suspend 25g in 500ml of distilled water and add the contents of one vial of Salmonella Selective Supplement (SR0194) reconstituted as directed. Mix well and bring to the boil with frequent agitation. DO NOT AUTOCLAVE. DO NOT HOLD AT BOILING TEMPERATURE. Cool to 50°C, mix well and pour into sterile Petri dishes.
Brilliance Salmonella Agar, Oxoid Preparation:
Suspend 27g of Brilliance Salmonella Agar Base in 500ml of distilled water. Add the contents of 1 vial of Salmonella Selective Supplement, resuspended as directed. Mix well and sterilise by bringing to the boil with frequent agitation. Cool to around 50ºC, mix well and pour into sterile Petri dishes.
NOTE: It is critical that the selective supplement is added prior to heating. When preparing volumes greater than 1 litre contact Oxoid Technical Support for directions.
Storage conditions and Shelf life
Salmonella Selective Supplement should be stored in the dark at 2-8ºC. When stored as directed, the un-opened products will remain stable until the expiry date printed on the packaging.
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM152.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
Price range: RM395.00 through RM627.00Brand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
OEM SeaKem® LE Agarose
RM1,514.00Brand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
Applications
Content & Storage
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Brand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available
PRODUCT CATEGORIES
OUR BRANDS
DISTRIBUTION PARTNERS
LabMal is the online distribution of life science and biotechnology products, including microbiology, molecular biology, cell biology, general lab equipment, plastic consumables, chemical, cleansing solution and protein. If you are interested in the products from our distribution partners that are not available in Labmal, please contact us at 03-8051 5106 or info@labmal.com.
