LabMal specialises in online distribution of life science products & services, lab consumables and general lab equipment.
FEATURED PRODUCTS
Bile Salts No. 3 250g
RM840.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Bile Salts No. 3 is a specifically refined fraction of bile acid salts.
- Normal working concentration 0.15% w/v.
- Each vial supplements 500mL of medium.
Medical Surgical Mask, 3-ply, 50pcs
RM43.99Brand:
Ready Stock! Ship out on the same day after order confirmation!
Shipping Charges:
1-5 boxes: RM30
6-10 boxes: RM60
10-15 boxes: RM90
Features:
- 3 ply
- Flat Mouthing Ear
- CE Certified
- Standard Used: EN 14683:2005
- Comfortable to wear
- Cover nose, mouse and chin for full protection
Cesium iodide, 99.999% trace metals basis – Sigma-Aldrich
Price range: RM224.00 through RM3,735.00Brand:
Sigma-Aldrich
Synonyms
Caesium iodide, Caesium monoiodide
Applications
Cesium iodide can be used as precursor to synthesize lead-free perovskite material, Cs2NaBiI6 (CNBI). The CNBI is highly stable and finds application in the field of solar cells, LEDs, and lasers.
It can be used to prepare brightest red emitting Cs2HfI6 scintillator which is applicable in high resolution gamma spectroscopy.
It can also be used tosynthesize Cesium based nanocrystals for the detection of ionizingradiations.
Features & Benefits
- High quantum efficiency
- High stability to ambient air and gas environment
Frequently used in devices such as phosphor screens for medical imaging, scintillators, calorimeters and a variety of particle detectors.
| CAS Number |
7789-17-5 |
| Empirical Formula |
CsI |
| Molecular Weight |
259.81 |
| Form |
Solid |
| Assay |
99.999% trace metals basis |
| Impurities |
≤15.0 ppm Trace Metal Analysis |
| Application(s) |
solar cells, LEDs, and lasers |
AMC30 Amoxycillin/Clavulanic Acid
RM77.00Brand:
Thermo ScientificTM OxoidTM
Magnesium Chloride (MgCl2) Solution – 6.0 ml
RM0.00Brand:
New England Biolabs
25 mM MgCl2 for use in conjunction with polymerase reaction buffers.
- MgCl2 is available for use in conjunction with NEB’s polymerase reaction buffers
- Supplied as 4 x 1.5 ml vials
Sabouraud Dextrose Agar 500g, Oxoid
RM248.00Brand:
Thermo ScientificTM OxoidTM
Identify dermatophytes and other fungi and yeasts in clinical specimens and environmental samples with the acidic Thermo Scientific™ Oxoid™ Sabouraud Dextrose Agar. The low pH supports the growth of fungi while inhibiting bacterial growth in mixed samples. Fungi maintain their typical cultural appearance and, thus, may be readily identified according to standard macroscopic characters.
| Typical Formula * |
gm/litre
|
| Mycological Peptone |
10.0 |
| Glucose (dextrose) |
40.0 |
| Agar |
15.0 |
| pH 5.6 ± 0.2 @ 25°C |
Directions
Add 65g of Sabouraud Dextrose Agar to 1L of distilled water. Sterilize the medium by autoclaving at 121°C for 15 mins. Mix well and pour into a clean petri dish.
Storage Conditions and Shelf Life
Store the medium at 10-30°C and use before the expiry date printed on the label. Store the prepared medium at 2-8°C.
Ot30 Oxytetracycline
RM84.00Brand:
Thermo ScientificTM OxoidTM
Giolitti-Cantoni Broth 500g
RM0.00Brand:
Thermo ScientificTM OxoidTM
An anaerobic enrichment broth for Staphylococcus aureus.
Giolitti-Cantoni Broth, Oxoid Composition
| Typical Formula* |
gm/litre |
| Tryptone |
10.0 |
| `Lab-Lemco’ powder |
5.0 |
| Yeast extract |
5.0 |
| Lithium chloride |
5.0 |
| Mannitol |
20.0 |
| Sodium chloride |
5.0 |
| Glycine |
1.2 |
| Sodium pyruvate |
3.0 |
| pH 6.9 ± 0.2 @ 25°C |
Giolitti-Cantoni Broth, Oxoid Preparation:
Suspend 54.2g in one litre of distilled water and heat gently to dissolve. Dispense 19ml amounts into 20 x 200mm test tubes and sterilise by autoclaving at 121°C for 15 minutes. Cool rapidly then aseptically add to each tube 0.3ml of a sterile solution of Potassium tellurite 3.5% SR0030.
The medium requires the addition of a 3.5% solution of Potassium tellurite when there is a direct addition of 1g of the sample to 19mls of broth. This level of Potassium tellurite is necessary to suppress the high numbers of contaminating organisms that could be expected.
The use of a diluted solution of Potassium tellurite is applicable when a 1 in 10 dilution of the food sample is carried out. In such cases the SR0030 should first be diluted 1 in 10 with sterile distilled water.
The addition of 0.1% Tween 80 can be recommended in order to improve recovery of heat injured Staphylococcus aureus cells e.g. from milk powder. 1g of Tween 80 should be added to 1 litre of CM0523 prior to autoclaving.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
Monarch Plasmid Miniprep Kit
Brand:
New England Biolabs
The Monarch Plasmid Miniprep Kit is a rapid and reliable method for the purification of up to 20 μg of high quality plasmid DNA.
- Elute in as little as 30 μl
- Prevent buffer retention and salt carry-over with optimized column design
- Reduce hands on time with faster protocols and less spin time
- Monitor completion of certain steps using colored buffer system
- No need to add RNase before starting
- Easily label columns using tab and frosted surfaces
- Buffers and columns available separately
- Significantly less plastic used when compared with other kits
- Responsibly-sourced and recyclable packaging
- No hazardous materials fees
Alcohol 95% (Undenatured) AR, 2.5L
RM193.00Brand:
Description
Synonyms: Ethyl-alcohol
Formula: C₂H₅OH
Undenatured ethanol is an important raw material for various chemical compounds. It acts as an hydrogen source in the manufacture of such compounds.
Note:
AR: Analitycal Reagent Grade: Reagents for analytical purpose or research work that need high purity.
CP: Chemically Pure Grade: Reagents for regular practical in its original purity.
Titania paste, transparent – Sigma-Aldrich
Price range: RM1,284.00 through RM1,729.00Brand:
Sigma-Aldrich
Synonyms
Greatcell Solar®, TiO2 paste
CAS No
–
General Description
Transparent titania (TiO2) paste is a visual range transparent paste that has a large surface area to volume ratio. The average diameter of the TiO2 nanoparticle within the paste is 20nm and the transparent sintered films are around 6-7 μm thick per printed layer.
Application
TiO2 paste forms a screen printed film which is majorly used as a conduction band on indium tin oxide (ITO) or fluorine doped tin oxide (FTO) based substrates for dye sensitized solar cells and for major photovoltaic based applications.
Use Transparent Titania Paste in applications that require a transparent sintered titania film with a large surface/volume ratio.
Transparent Titania Paste is formulated to yield sintered film thicknesses of 6-7μm when screen printed with a 43T mesh. Transparent Titania Paste has highly dispersed and stable anatase nanoparticles.
It is optimised for screen printing using a synthetic 43T mesh screen (or similar). After drying; this paste must be fired at or above 500°C. This results in a transparent sintered layer; with a film thickness of approximately 6-7μm for one printed layer and ~12μm for two printed layers; when using a 43T mesh screen.
The paste exhibits optimal rheological properties that provide good surface uniformity and contains organic binders specially formulated to provide versatile porosity suitable for a range of dye/electrolyte systems.
Storage: Store in the dark at 20°C
Legal Information
Product of Greatcell Solar Materials Pty Ltd.Greatcell Solar is a registered trademark of Greatcell Solar Materials Pty Ltd.
Greatcell Solar is a registered trademark of Greatcell Solar
MRVP Medium 500g, Oxoid
RM380.00Brand:
Thermo ScientificTM OxoidTM
Oxoid MRVP Medium. A glucose-phosphate medium is used for the differentiation of the coli-aerogenes group by the Methyl Red and Voges-Proskauer tests.
MRVP Medium, Oxoid Composition
| Typical Formula* |
gm/litre
|
| Peptone |
7.0 |
| Glucose |
5.0 |
| Phosphate buffer |
5.0 |
| pH 6.9 ± 0.2 |
|
MRVP Medium, Oxoid Preparation:
Add 17g to 1 litre of distilled water. Mix well, distribute into final containers and sterilise by autoclaving at 121°C for 15 minutes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-6°C.
Precautions
The MR-VP reactions are only part of the tests required to identify organisms.
Each laboratory should standardise on the inoculum density, volume of broth and the test container size.
MR tests require a minimum incubation of 48 hours before the pH indicator is added.
When using Barritt’s reagents add a-naphthol first and KOH second; do not reverse this order.
Vaughn et al. warned of false positive VP reactions if the completed tests are left standing for over an hour.
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM152.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
Price range: RM395.00 through RM627.00Brand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
OEM SeaKem® LE Agarose
RM1,514.00Brand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
Applications
Content & Storage
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Brand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available
FEATURED PRODUCTS
Reinforced Clostridial Agar 500g
RM572.00Brand:
Thermo ScientificTM OxoidTM
Cultivate and enumerate anaerobes, especially Clostridium species, with Thermo Scientific™ Oxoid™ Reinforced Clostridial Agar (RC Agar) (Dehydrated). A solid, highly nutritious medium, it can be used as an enrichment medium to optimize the growth of clostridia and other anaerobes, lactobacilli, and many other species of bacteria.
Reinforced Clostridial Agar (RC Agar) (Dehydrated), Oxoid Composition
| Typical Formula* |
gm/litre |
| Yeast extract |
3.0 |
| `Lab-Lemco’ powder |
10.0 |
| Peptone |
10.0 |
| Glucose |
5.0 |
| Soluble starch |
1.0 |
| Sodium chloride |
5.0 |
| Sodium acetate |
3.0 |
| Cysteine hydrochloride |
0.5 |
| Agar |
15.0 |
| pH 6.8 ± 0.2 @ 25°C |
|
Reinforced Clostridial Agar (RC Agar) (Dehydrated), Oxoid Preparation:
Suspend 52.5g in 1 litre of distilled water. Bring to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
Precautions
Further identification tests must be carried out on organisms isolated from this medium.
Cronobacter Screening Broth (CSB)
RM539.00Brand:
Thermo ScientificTM OxoidTM
- Oxoid Cronobacter Screening Broth Base (CSB) is a selective enrichment broth for isolation of Cronobacter spp, from food and environmental samples.
- Requires Vancomycin Supplement, 5mg, Part No. SR0247E.
Cronobacter Screening Broth Base (CSB), Oxoid Composition
| Typical Formula* |
gm/litre |
| Peptone |
10.0 |
| Meat extract |
3.0 |
| Sodium chloride |
5.0 |
| Bromocresol purple |
40 mg |
| Sucrose |
10.0 |
| pH 7.4 ± 0.2 @ 25°C |
Cronobacter Screening Broth (CSB), Oxoid Preparation:
Dissolve 14.02g in 500ml of distilled water. Sterilize by autoclaving at 121°C for 15 minutes. Cool to approximately 50°C, and aseptically add the contents of 1 vial of Vancomycin Supplement (5mg) (SR0247E) reconstituted as directed. Mix well and aseptically dispense into sterile containers.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label
Store the prepared medium at 2-8°C
Anti-acetyl-Histone H3 (rabbit polyclonal)
RM3,116.00Brand:
Merck
Description
Histone H3 is one of the five main histone proteins involved in the structure of chromatin in eukaryotic cells. Featuring a main globular domain and a long N-terminal tail, H3 is involved with the structure of the nucleosomes of the ‘beads on a string’ structure. The N-terminal tail of histone H3 protrudes from the globular nucleosome core and can undergo several different types of epigenetic modifications that influence cellular processes. These modifications include the covalent attachment of methyl or acetyl groups to lysine and arginine amino acids and the phosphorylation of serine or threonine. Acetylation of histone H3 occurs at several different lysine positions in the histone tail and is performed by a family of enzymes known as Histone Acetyl Transferases (HATs). Acetylation of lysine14 is commonly seen in genes that are being actively transcribed into RNA. Research focus area: Epigenetics.
Key Applications:
-Western Blotting
-Immunocytochemistry
-ChIP-seq
-Chromatin Immunoprecipitation (ChIP)
D-Tube™ Dialyzer Mini, Midi, Maxi and Mega
Price range: RM680.00 through RM3,137.00Brand:
Merck
Description
The D-Tube™ Dialyzers be used for dialysis and electroelution of proteins, RNA, DNA, and oligonucleotides from polyacrylamide or agarose gels. The disposable, single-use tubes require no syringes, microcentrifuge, or laborious steps to manipulate small sample volumes. The sample is added and removed using a standard laboratory pipet. Available with molecular weight cutoffs (MWCO) from 3.5 to 14 kDa, the D-Tube Dialyzers are designed in four volume capacities: mini (10-250 µl), midi (50-800 micro;l), maxi (100-3000 µl), and mega (10ml, 15ml, and 20 ml). The membrane is ultra-clean, EDTA-treated regenerated cellulose, sulfur- and heavy metal-free.
The D-Tube Dialyzers Mini, Midi, and Maxi contain 10 D-Tube Dialyzers and one floating rack that can hold up to four D-Tube Dialyzers. The D-Tube Dialyzers Mega contain 10 or 50 tubes and one or 5 floating racks to hold one D-Tube Mega in the exchange buffer.
Perovskite quantum dots oleic acid and oleylamine coated, fluorescence λem 510 nm, 10 mg/mL in toluene – Sigma-Aldrich
RM2,016.00Brand:
Sigma-Aldrich
Synonyms
Cadmium free QDs, Fluorescent nanocrystals, Perovskite nanocrystals, QDs
Applications
For Perovskite quantum dots:
Perovskite quantum dots (QDs) of common formula CsPbX3 (X = Cl, Br, I) possess high photoluminescence efficiency and narrow emission and emit in the visible spectral regime. Perovskite QDs are cadmium free and the aforementioned properties render them suitable for applications in light emitting diodes (LEDs), lasers, liquid crystal displays (LCDs) etc.
Yeast Autolysate Supplement 1 x 10 Vials
RM632.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Yeast Autolysate Supplement is used for the preparation of New York City Medium for the isolation of Neisseria spp.
- Add to GC Agar Base, Part No. CM0367B
- Each vial supplements 500mL of medium
Yeast Autolysate Supplement, Oxoid Composition
| Vial contents (each vial is sufficient for 500ml of medium) | |
| Yeast autolysate fractions |
5.0 g |
| Glucose |
0.5 g |
| Sodium bicarbonate |
0.075 g |
Yeast Autolysate Supplement, Oxoid Preparation:
Reconstitute one vial as directed, aseptically add the contents to 500 ml of sterile GC Agar Base CM0367, 1% (w/v) Soluble Haemoglobin Powder LP0053. Mix gently and pour into sterile Petri dishes.
Quick-Load 100 bp DNA Ladder
Brand:
New England Biolabs
This product is available in Quick-Load Purple format – enjoy sharper bands, no UV shadow, and a lower price.
- Size range: 100 bp to 1,517 bp
- Convenient, ready-to-load format
- Formulated with bromophenol blue dye
- Easy to identify reference bands
- Small size suitable for 125 gel lanes; large size suitable for 375 gel lanes
Ns100 Nystatin
RM0.00Brand:
Thermo ScientificTM OxoidTM
ProteoExtract® Subcellular Proteome Extraction Kit
RM3,310.00Brand:
Merck
Description
Fast and reproducible extraction of subcellular proteomes from mammalian cells
ProteoExtract® Subcellular Proteome Extraction Kit (S-PEK) is designed for fast and reproducible extraction of subcellular proteomes from adherent and suspension-grown mammalian cells. The S-PEK takes advantage of the different solubilities of certain subcellular compartments in the four selected reagents. In the case of adherent cells, the procedure is performed directly in the tissue culture dish without the need for cell removal. Cells or the parts of the cells remain attached to the plate during sequential extraction of subcellular compartments, until the appropriate extraction reagent is used. Thus, the early destruction of the cellular structure by enzymatic or mechanical detachment of cells from the tissue culture plate and any mixing of different subcellular compartments is prevented. For suspension-grown cells, extraction starts with gentle sedimentation and washing of the cells. The stepwise extraction delivers four distinct protein fractions from one sample:
– Cytosolic fraction (F1)
– Membrane/organelle protein fraction (F2)
– Nucleic protein fraction (F3)
– Cytoskeletal fraction (F4)
Proteins are obtained in the native state making the S-PEK suitable for many downstream applications such as 1D and 2D gel electrophoresis, immunoblotting, enzyme activity assays, and protein microarrays.
Sample size: 3-5×106 or 25-50 mg tissue.
Sensitest Agar 500g
RM1,671.00Brand:
Thermo ScientificTM OxoidTM
A medium specially designed to give large, clear zones with all antibiotics, without the addition of lysed or whole blood.
Sensitest Agar, Oxoid Composition
| Typical Formula* |
gm/litre |
| Hydrolysed casein |
11.0 |
| Peptones |
3.0 |
| Sodium chloride |
3.0 |
| Glucose |
2.0 |
| Starch |
1.0 |
| Buffer salts |
3.3 |
| Nucleoside bases |
0.02 |
| Thiamine |
0.00002 |
| Agar |
8.0 |
| pH 7.4 ± 0.2 @ 25°C |
Sensitest Agar, Oxoid Preparation:
Suspend 32g in 1 litre of distilled water and bring to the boil to dissolve the agar. Sterilise by autoclaving at 121°C for 15 minutes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared plates of agar at 2-8°C.
Precautions
As with other susceptibility testing media, Sensitest Agar should be used for rapidly growing aerobic organisms only. It should not be modified by the addition of carbohydrates or incubated in a CO2 enriched atmosphere.
If the medium is used for Bell’s CDS method then the specified discs and technique must be used. Refer to the monograph cited in the References.
Heart Infusion Broth 500g
RM684.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Heart Infusion Broth is a highly nutritious liquid medium recommended for the cultivation of fastidious microorganisms.
Heart Infusion Broth, Oxoid Composition
| Typical Formula* | gm/litre |
| Beef heart infusion solids | 17.5 |
| Proteose peptone | 10.0 |
| Glucose | 2.0 |
| Sodium chloride | 5.0 |
| Di-sodium phosphate | 2.5 |
| pH 7.4 ± 0.2 @ 25°C |
Heart Infusion Broth, Oxoid Preparation:
Dissolve 37g in 1 litre of distilled water. Mix well and distribute into final containers. Sterilise by autoclaving at 121ºC for 15 minutes.
Storage conditions and Shelf life
The dehydrated medium should be stored at 10-30°C and used before the expiry date on the label.
Store the prepared medium in the dark below 20°C.
Precautions
Heart Infusion Broth should only be used for in vitro diagnostic purposes.
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM152.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM152.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
Price range: RM395.00 through RM627.00Brand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
OEM SeaKem® LE Agarose
RM1,514.00Brand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
Applications
Content & Storage
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Brand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available
PRODUCT CATEGORIES
OUR BRANDS
DISTRIBUTION PARTNERS
LabMal is the online distribution of life science and biotechnology products, including microbiology, molecular biology, cell biology, general lab equipment, plastic consumables, chemical, cleansing solution and protein. If you are interested in the products from our distribution partners that are not available in Labmal, please contact us at 03-8051 5106 or info@labmal.com.
