LabMal specialises in online distribution of life science products & services, lab consumables and general lab equipment.
FEATURED PRODUCTS
High-performance silicon anode, 1 micron silicon particles in crosslinked conducting polyanaline matrix – Sigma-Aldrich
RM1,961.00Brand:
Sigma-Aldrich
Synonyms
Doped polyaniline, Si encapsulated in 3D crosslinked polyaniline, Si/PANi composite, Silicon micron particle
General Description
Silicon is a most promising next generation lithium ion battery electrode material, due to its ~10 times higher specific capacity (3600 mAh/g) than graphite (372 mAh/g). However, silicon experiences large volume change (~400%) during lithium insertion, causing it to fracture and detach from current collector, rendering prototypical lithium-silicon batteries to lose most of their capacity in less than 10 charge-discharge cycles. A solution to the capacity and stability issues posed by the significant volume expansion upon lithiation of silicon is critical to the success of high capacity lithium ion batteries.
This silicon/PANi composite utilizes a doped, intrinsically conductive, 3D cross-linked polyaniline as matrix, which could function as both the conductive binder and the polymer electrolyte for silicon-based electrodes. Previous study for a similar silicon-based three-dimensional conducting polymer composite demonstrated increased electrochemically performance due to short diffusion paths and good 3D connectivity, and resulted in a marked improvement in cyclability, with over 90% capacity retention after 5,000 cycles.
This composite is made by encapsulating silicon particles in an in-situ polymerized 3D-crosslinked conductive polyaniline framework. This Si/PANi composite not only allows fast electrical and ionic transport, but also provides free space to allow giant volume expansion. This Si/PANi composite provides a ready-to-use electrochemically active silicon composite that would increase the capacity of conventional lithium ion battery, and improve the cycle-life of Si-based anodes
dATP Solution – 25 umol
RM0.00Brand:
New England Biolabs
Enhance your PCR Reaction with our ultrapure dATP solution
- Compatible with all NEB DNA polymerases in a variety of applications
- ≥ 99% purity as determined by HPLC analysis
- Also available in solution mix (NEB #N0447) or set (NEB #N0446) format
X-VIVO™ 10 Serum-free Hematopoietic Cell Medium, xenofree
RM850.00Brand:
Lonza
Description
The X-VIVO™ 10 Media formulations are designed to support the generation of LAK cells in a serum-free environment. The original protocols involved the incubation of patient or normal donor peripheral blood lymphocytes (PBL) at 1.0 – 3.0 × 106 cells/ml for a period of 3 days in the presence of 1,000 Cetus units of rIL-2/ml. Optimal LAK cell generation is achieved when peripheral blood lymphocytes are incubated for 3 – 10 days at a density of 1.0 – 6.0 × 106 cells/ml in the presence of 100 – 1,000 Cetus units of rIL-2. X-VIVO™ 10 Media is available as a 1X liquid in two convenient formulations.
Key Applications:
-Proliferation of peripheral blood lymphocytes
-Proliferation of tumor infiltrating lymphocytes
-Cryopreservation of human tissue
-Cultivation of human monocytes and macrophages
-Cultivation of stem cells
-Cultivation of dendritic cells
Gallium arsenide (single crystal substrate), <100> – Sigma-Aldrich
RM913.00Brand:
Sigma-Aldrich
Synonyms
Nanofibrous inorganic powder, SiO2
Cas No.
7631-86-9
General Description
Silica nanofibers are yielded through a novel ac electrospinning process resulting in extraordinary aspect ratios, consistent purity, and consistent certification of form parameters that are difficult if not impossible to achieve using other nanofiber production methods. Potential applications include filtration membranes and catalyst support.
Heart Infusion Broth 500g
RM684.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Heart Infusion Broth is a highly nutritious liquid medium recommended for the cultivation of fastidious microorganisms.
Heart Infusion Broth, Oxoid Composition
| Typical Formula* | gm/litre |
| Beef heart infusion solids | 17.5 |
| Proteose peptone | 10.0 |
| Glucose | 2.0 |
| Sodium chloride | 5.0 |
| Di-sodium phosphate | 2.5 |
| pH 7.4 ± 0.2 @ 25°C |
Heart Infusion Broth, Oxoid Preparation:
Dissolve 37g in 1 litre of distilled water. Mix well and distribute into final containers. Sterilise by autoclaving at 121ºC for 15 minutes.
Storage conditions and Shelf life
The dehydrated medium should be stored at 10-30°C and used before the expiry date on the label.
Store the prepared medium in the dark below 20°C.
Precautions
Heart Infusion Broth should only be used for in vitro diagnostic purposes.
Lom10 Lomefloxacin
RM0.00Brand:
Thermo ScientificTM OxoidTM
Poly(3-hexylthiophene-2,5-diyl) – Sigma-Aldrich
RM3,561.00Brand:
Sigma-Aldrich
Synonyms
P3HT
General Description
Poly(3-hexylthiophene) (P3HT) is a regioregular semiconducting polymer. It is used in organic electronics primarily because of its regular end-to-end arrangement of side chain, which allows efficient p- p stacking of the conjugated backbones. On account of the alkyl side group, P3HT is rendered hydrophobic in neutral state. Solution-to-solid phase transformation and thin film formation of poly(3-hexylthiophene) (P3HT) was reported in a study.
Poly(3-hexylthiophene-2,5-diyl) (P3HT) is a poly(alkylthiophene) based semiconducting polymer that is hydrophobic at neutral state and has π-π conjugation in its backbone. It has a hole mobility is in the range of 10-3-10-1 cm2V-1s-1 and is commonly used in the development of field-effect transistors (FETs) for a wide range of applications.
We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product belongs to Enabling category of greener alternatives thus aligns with “Design for energy efficency”. Hole transport organic materials allow perfect energy level alignment with the absorber layer and therefore efficient charge collection, are prone to degradation in ambient conditions.
Applications
For the characterization and solid-state properties of this polymer, see J. Am. Chem. Soc. .
P3HT, an electron donor that acts as a semiconducting active layer in combination with an electron acceptor like fullerene derivative (6,6)-phenyl C61-butyric acid methylester (PCBM), can be used to fabricate bulk heterojunction (HJT) based organic solar cells (OSCs).[4][5][6][7] Volatile organic compounds (VOCs) and electric sensor devices can be developed by using Langmuir-Schaefer (LS) films of P3HT and poly(3-octylthiophene)(P3OT). It can also be used with polystyrene to process a nano-scaled polymeric coating through spray coating onto carbon nanotube (CNT) powders.
Poly(3-hexylthiophene-2,5-diyl) may be used to fabricate ZnO nanowire arrays based photodiode. Regio- regular poly(3-hexylthiophene-2,5-diyl) may find extensive use as a semiconducting layer in organic thin film field effect transistor (FETs).
Rechargeable battery electrodes, electrochromic devices, chemical and optical sensors, light-emitting diodes, microelectrical amplifiers, field-effect transistors and non-linear optical materials.
Features & Benefits
Greater than 90% head-to-tail regiospecific conformation.
Good processibility, environmental stability and electroactivity.
PEDOT:PSS, high-conductivity grade, 1.1% aqueous dispersion, surfactant-free – Sigma-Aldrich
RM1,293.00Brand:
Sigma-Aldrich
Synonyms
Orgacon™ ICP 1050, PEDOT:PSS, Poly(2,3-dihydrothieno-1,4-dioxin)-poly(styrenesulfonate)
CAS No
–
General Description
Aqueous surfactant-free dispersion of high conductivity grade PEDOT:PSS polymer. Optimal performance in transparent conductive coatings may require addition of formulation ingredients (e.g. surfactants and high-boiling solvents).Conducting polymer such as poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate) anions (PEDOT/PSS) is widely used in various organic optoelectronic devices. PEDOT: PSS is a blend of cationic polythiopene derivative, doped with a polyanion. High electrical conductivity and good oxidation resistance of such polymers make it suitable for electromagnetic shielding and noise suppression. Thus, the polymer film was found to possess high transparency throughout the visible light spectrum and even into near IR and near UV regions, virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Impact of small electric and magnetic fields on the polymer was studied.
Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) is a conductive polymer without a high boiling solvent (HBS), that is formed by electropolymerizing 3,4-ethylenedioxythiophene in a solution of poly(styrenesulfonate) (PSS). PEDOT is doped with positive ions and PSS with negative ions. It has the following properties that make it a viable polymer in organic electronics.
We are committed to bringing you Greener Alternative Products, which adhere to one or more of the 12 Principles of Green Chemistry. This product is used in energy conversion and storage, thus has been enhanced for energy efficiency. Click here for more information.
Applications
PEDOT:PSS can be used as an electrode material with high mobility for charge carriers. It can be used for a wide range of energy based applications such as organic photovoltaics (OPV), perovskite solar cells (DSSCs), organic light emitting diodes (OLEDs) and other biomedical sensors.
Used to prepare highly transparent conductive coating formulations. Primary and secondary nucleation by introducing PEDOT:PSS in a hydrogel was studied.
Virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend.
Legal Information
Product of Agfa-Gevaert N.V.
Orgacon is a trademark of Agfa-Gevaert N.V.
IEF Conversion for 18cm IPG Strips and Tube Gels
RM0.00Brand:
Cleaver Scientific
Conversion for 18cm IPG Strips and Tube Gels for use with CSL-IEF system.
Ampicillin Selective Supplement 1 x 10 Vials
RM479.00Brand:
Thermo ScientificTM OxoidTM
- Oxoid Ampicillin Selective Supplement is used for the isolation of Aeromonas hydrophila.
- Add to to Aeromonas Medium Base, Part No. CM0833B.
Ampicillin Selective Supplement, Oxoid Preparation:
Suspend 29.5g in 500ml of distilled water. Bring gently to the boil. DO NOT AUTOCLAVE. Cool to 50°C and aseptically add one vial of Ampicillin Selective Supplement SR0136 reconsituted as directed. Mix well and pour plates.
| Vial contents (each vial is sufficient for 500 ml of medium) | per vial | per litre |
| Ampicillin |
2.5mg |
5.0mg |
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared plates of medium 2-8°C.
TGT4XMINI Teaching Gel Tank
Brand:
Cleaver Scientific
These industry standard tanks come in three sizes -to run six gels, four gels or a single gel. The gel trays are UV transparent and measure 7x7cm, each tank comes with two combs and two casting dams per gel tray. Supplied with highly flexible cable and connectors which are CE compliant, providing complete electrical isolation and safety. They have a special manufactured safety cover, which completely covers the tank of the system, making it one of the safest available.
abCycler
RM0.00Brand:
AITbiotech
The abCycler offers reliable and accurate PCR system with precise temperature control and rapid temperature ramping. These extensive features coupled with a small footprint are ideal for any laboratories.
Features
Smart design and Convenient features
Reproducibility
Simple, intuitive user interface
Reliability
Please contact us for pricing and availability.
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM152.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
Price range: RM395.00 through RM627.00Brand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
OEM SeaKem® LE Agarose
RM1,514.00Brand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
Applications
Content & Storage
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Brand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available
FEATURED PRODUCTS
Listeria Enrichment Broth Base UVM 500g
RM547.00Brand:
Thermo ScientificTM OxoidTM
- Oxoid Listeria Enrichment Broth Base (UVM Formulation) is a two-step selective enrichment (USDA-FSIS) method.
- Also available Listeria Primary Enrichment Supplement-UVM I, Part No. SR0142E or SR0142B and Listeria Secondary Selective Enrichment Supplement-UVM II, Part No. SR0143E.
Listeria Enrichment Broth Base (UVM formulation) is to be used with the appropriate supplement for UVMI broth or UVMII broth.
Listeria Enrichment Broth Base (UVM formulation), Oxoid Composition
| Typical Formula* |
gm/litre |
| Proteose peptone |
5.0 |
| Tryptone |
5.0 |
| `Lab-Lemco’ powder |
5.0 |
| Yeast extract |
5.0 |
| Sodium chloride |
20.0 |
| Disodium hydrogen phosphate |
12.0 |
| Potassium dihydrogen phosphate |
1.35 |
| Aesculin |
1.0 |
| pH 7.4 ± 0.2 @ 25°C |
|
Listeria Enrichment Broth, Oxoid Preparation:
Suspend 27.2g in 500ml of distilled water. Sterilise by autoclaving at 121°C for 15 minutes. Cool to 50°C.
To Prepare Listeria Primary Selective Enrichment Medium (UVM I):
Aseptically add the contents of 1 vial of Listeria Primary Selective Enrichment Supplement (UVM I) SR0142 reconsituted as directed. Mix well and distribute into sterile containers.
To Prepare Listeria Secondary Selective Enrichment Medium (UVM II):
Aseptically add the contents of 1 vial of Listeria Secondary Selective Enrichment Supplement (UVM II) SR0143 reconsituted as directed. Mix well and distribute into sterile containers.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
Precautions
Note the precautions stated under Listeria Selective Medium (Oxford) CM0856 and SR0140.
Broth cultures are more dangerous than colonies on agar plates.
Store prepared medium away from light. Acriflavine can photo-oxidise to form inhibitory compounds against listeriae.
Trichloroacetic acid, AR, 500g
RM103.00Brand:
Chemiz
Description
Synonyms: Trichloroethanoic acid
Formula: Cl3CCOOH
Tricholoroacetic acid is used in biology to facilitate the precipitation of macromolecules found in the sample. It is also used in the cosmetic industry as chemical peel and wart remover.
Note:
AR: Analitycal Reagent Grade: Reagents for analytical purpose or research work that need high purity.
CP: Chemically Pure Grade: Reagents for regular practical in its original purity.
Immobilon® Block
Brand:
Merck
Description
Immobilon® Block Noise Cancelling Reagents are designed especially for Western blotting applications. This family of protein-free, ready-to-use buffers has been optimized to reduce background levels when using chemiluminescence, fluorescent, or phosphotyrosine detection. Bløk buffers are ideal for use with Immobilon®-P Western blotting membranes and the SNAP i.d.® system, and are also compatible with standard Western blotting techniques.
Blood Agar Base No. 2 500g
RM356.00Brand:
Thermo ScientificTM OxoidTM
Cultivate and isolate fastidious pathogens and other microorganisms with Thermo Scientific™ Oxoid™ Blood Agar Base No. 2 (Dehydrated). The specially designed formulation meets the need for a nutritious blood agar which permits maximum recovery of delicate organisms without interfering with their hemolytic reactions. Without any additions, the medium can be used for short-term maintenance of stock cultures. And with the addition of blood, the medium becomes suitable for the determination of the hemolytic reactions which are important diagnostic criteria for many organisms.
Blood Agar Base No. 2, Oxoid Composition
| Typical Formula* |
gm/litre |
| Proteose peptone |
15.0 |
| Liver digest |
2.5 |
| Yeast extract |
5.0 |
| Sodium chloride |
5.0 |
| Agar |
12.0 |
| pH 7.4 ± 0.2 @ 25°C |
|
Blood Agar Base No. 2, Oxoid Preparation:
Suspend 40g in 1 litre of distilled water. Bring to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes. Cool to 45-50°C and add 7% sterile blood.
Mix with gentle rotation and pour into sterile dishes or other containers.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared plates of medium at 2-8°C.
Precautions
Brucella cultures are highly infective and must be handled under properly protected conditions. Incubate in 5-10% carbon dioxide atmosphere for 24-48 hours.
Fep30 Cefepime
RM80.00Brand:
Thermo ScientificTM OxoidTM
Acetonitrile Gradient Grade for Liquid Chromatography LiChrosolv® Reag. Ph Eur. (Merck)
RM462.00Brand:
Merck
Description
CAS number: 75-05-8
Chemical Formula: CH₃CN
Molar Mass: 41.05 g/mol
Synonyms: ACN, Methyl cyanide, Ethyl nitrile, Cyanomethane
With their high degree of UV transmittance, low particle count, low acidity and alkalinity and low evaporation residue level, LiChrosolv® solvents are ideal for reproducible separations. Since separations are normally carried out under gradient conditions in analytical HPLC, we offer solvents in “gradient grade” as well as “isocratic grade”. This enables to minimize the gradient effect of the solvent involved. Filtered by 0.2 µm filter. Suitable for UPLC / UHPLC /Ultra HPLC – instruments.
MicroPette Plus 8-Channel Pippettes
Brand:
Biologix
This product is not available at the moment. Please contact us for more information.
Characteristics
- Ergonomic design for comfortable extended use
- Easy-to-read display
- Fully mechanical function
- Convenient one-handed operation
- Easy to calibrate and maintain with included tool
NEB PCR Cloning Kit (Without Competent Cells) – 20 rxns
RM0.00Brand:
New England Biolabs
Easy cloning of all PCR products, including blunt and TA ends
- In vitro transcription with both SP6 and T7 promoters
- BsaI-site removed from the ampicillin-resistant gene (allows for the cloning of Golden Gate Assembly modules)
- Fast cloning experiments with 5-minute ligation step
- Simplified screening with low/no colony background and no blue/white selection required
Caz30 Ceftazidime
RM80.00Brand:
Thermo ScientificTM OxoidTM
Potassium Tellurite 3.5%
RM319.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Potassium Tellurite (3.5%) is a solution for addition to culture media.
Ordering Information:
Supplied 2mL/vial
Ampicillin 256 M.I.C.E. (50 Pack)
RM0.00Brand:
Thermo ScientificTM OxoidTM
**This product is not available at the moment.
Effortlessly establish accurate Minimum Inhibitory Concentration (MIC) values manually using Thermo Scientific™ Oxoid™ Ampicillin M.I.C.Evaluator Strips (M.I.C.E.™).
RapID STAPH PLUS System 20/KT
RM1,736.00Brand:
Thermo Scientific™ Remel™
Identify 40 different staphylococci and related genera in just four hours using the Thermo Scientific™ RapID™ STAPH PLUS System, an identification system based on enzyme technology.
Requires:
Requires RapID Nitrate A, Part No. R8309003; RapID Nitrate B, Part No. R8309004; RapID Inoculation Fluid, Part No. R8325106.
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM152.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
Price range: RM395.00 through RM627.00Brand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
OEM SeaKem® LE Agarose
RM1,514.00Brand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
Applications
Content & Storage
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Brand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available
PRODUCT CATEGORIES
OUR BRANDS
DISTRIBUTION PARTNERS
LabMal is the online distribution of life science and biotechnology products, including microbiology, molecular biology, cell biology, general lab equipment, plastic consumables, chemical, cleansing solution and protein. If you are interested in the products from our distribution partners that are not available in Labmal, please contact us at 03-8051 5106 or info@labmal.com.
