LabMal specialises in online distribution of life science products & services, lab consumables and general lab equipment.
FEATURED PRODUCTS
Listeria Selective Supplement 1 x 10 Vials
RM501.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Listeria Selective Enrichment Supplement is used for the enrichment of Listeria spp.
- Add to Listeria Enrichment Broth, Part No. CM0862B
- Each vial supplements 500mL of medium
Listeria Selective Enrichment Supplement, Oxoid Composition
| Vial contents: (each vial is sufficient for 500ml of medium) |
per vial
|
per litre
|
| Nalidixic acid |
20.0mg |
40.0mg
|
| Cycloheximide |
25.0mg |
50.0mg
|
| Acriflavine hydrochloride |
7.5mg |
15.0mg
|
Listeria Selective Enrichment Medium Preparation:
Reconstitute one vial as directed, and add the contents to 500ml of Listeria Enrichment Broth Base (CM0862). Sterilize by autoclaving at 121°C for 15 minutes. Cool to 50°C and mix well before distributing into sterile containers in volumes as required.
Storage conditions and Shelf life
Listeria Selective Enrichment Supplement SR0141 as supplied should be stored at 2-8°C. When stored as directed the reagents are stable until the expiry date printed on the label.
Precautions
Listeria Selective Enrichment Supplement contains cycloheximide and is toxic if swallowed, inhaled or by skin contact. As a precaution when handling wear gloves and eye/face protection.
Acriflavine is activated by light and may form compounds inhibitory for Listeria.
Gentamycin 256 M.I.C.E. (50 Pack)
RM0.00Brand:
Thermo ScientificTM OxoidTM
**This product is not available at the moment.
Effortlessly establish accurate Minimum Inhibitory Concentration (MIC) values manually using Thermo Scientific™ Oxoid™ Gentamycin M.I.C.Evaluator Strips (M.I.C.E.™).
E30 Erythromycin
RM0.00Brand:
Thermo ScientificTM OxoidTM
Poly-TPD – Sigma-Aldrich
RM2,461.00Brand:
Sigma-Aldrich
Synonyms
4-Butyl-N,N-diphenylaniline homopolymer, Poly(4-butyl-N,N-diphenylaniline), Poly(4-butyltriphenylamine), Poly[N,N′-bis(4-butylphenyl) -N,N′-bis(phenyl)-benzidine]
Cas No.
472960-35-3
General description
We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product belongs to the Enabling category of greener alternatives, thus aligns with “Design for energy efficiency”. Hole transport organic materials allow perfect energy level alignment with the absorber layer and therefore efficient charge collection, but are prone to degradation in ambient conditions. Click here for more information.
Application
In a recent study of a double-junction Quantum-Dot Light-Emitting Diodes (QD-LEDs), an impressive high quantum efficiency of 42.2% and a high current efficiency of 183.3 cd/A were achieved, which are comparable to those of the best vacuum-deposited tandem organic LEDs. Such high-efficiency devices are achieved by interface engineering of fully optimized single light-emitting units, which improves carriers′ transport/injection balance and suppresses exciton quenching induced by ZnO, and design of an effective interconnecting layer consisting of Poly-TPD mixed poly(9-vinylcarbazole) (PVK)/poly(3,4-ethylenedioxythiophene): polystyrene sulfonate/polyethylenimine ethoxylated-modified ZnO.
Indoor photovoltaics is one of the best sustainable and reliable energy sources for low-power consumption electronics, such as the rapidly growing Internet of Things.
In another recent study, Perovskite photovoltaic (PPV) cells with a mesoporous PPV (mPPV) structure using typical Spiro-OMeTAD as the hole transport layer (HTL) show the highest maximum power density (Pmax) of 19.9 μW/cm2 under 200 lux and 115.6 μWcm-2 under 1000 lux (without masking), which is among the best of the indoor PV. When PEDOT: PSS is replaced by Poly-TPD as HTL in the inverted PPV (iPPV) cell, the Pmax under indoor light improves significantly and is comparable to that of the best mesoporous mPPV cell.
Device performance:
iPPV-Poly-TPD
1. under one sun [Pin=100 mW/cm2]
Jsc=21.8 mA/cm2
Voc=1.07 V
FF=73.7%
PCE=17.2%
2. under 1000 lux [200 lux]
Jsc=172.3 mA/cm2
Voc=0.851 V
FF=75.9%
Pmax=111.3 mW/cm
Poly-TPD is a solution-processable polymer hole transport material. Its applications include:
Organic Light Emitting Diode (OLED): Hole transport layer / Electron blocking layer (HTL/EBL) Materials
Solution-Processed OLED: Polymer hole transport layer
Dye-Sensitised Solar Cell (DSSC): Hole transport materials
Perovskite Solar Cells: Hole transport material
Flexible Printed Electronics: Hole transport layer / Hole injection layer(HTL/HIL) Polymers
Prl30 Piperacillin
RM109.00Brand:
Thermo ScientificTM OxoidTM
TBX Medium 500g
RM2,238.00Brand:
Thermo ScientificTM OxoidTM
Detect and enumerate Escherichia coli in food and animal feed samples with Thermo Scientific™ Oxoid™ Typtone Bile X-Glucuronide (TBX) Medium (Dehydrated). The medium meets the formulation and performance criterion laid down in ISO 16649 and ISO 11133:2014.
TBX Medium builds on the speed, reliability and recovery from frozen samples and detection of poor lactose fermenters offered by the original Tryptone Bile Agar, with the addition of a chromogenic agent, X-glucuronide, which detects glucuronidase activity, an enzyme shown to be highly specific for Escherichia coli.
Typtone Bile X-Glucuronide (TBX) Medium (Dehydrated), Oxoid Composition
| Typical Formula* | gm/litre |
| Tryptone | 20.0 |
| Bile Salts No. 3 | 1.5 |
| Agar | 15.0 |
| X-glucuronide | 0.075 |
| pH 7.2 ± 0.2 @ 25°C |
Typtone Bile X-Glucuronide (TBX) Medium (Dehydrated), Oxoid Preparation:
Suspend 36.6g of TBX Medium in 1 litre of distilled water. Sterilise by autoclaving at 121°C for 15 minutes. Cool to 50°C and pour the medium into sterile Petri dishes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared plates of medium at 2-8°C.
PCR Marker
Brand:
New England Biolabs
- Size range: 50 bp to 766 bp
- Value pricing
- Supplied with free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 100 gel lanes; large size suitable for 500 gel lanes
n-Hexane For Liquid Chromatography LiChrosolv® (Merck)
RM767.00Brand:
Merck
Description
CAS number: 110-54-3
Chemical Formula: CH₃(CH₂)₄CH₃
Molar Mass: 86.18 g/mol
Synonyms: –
For perfect high-performance liquid chromatography (HPLC) results, high-performance solvents are a must. LiChrosolv® solvents from Merck are designed to optimally support analytical HPLC, fast chromatography, and LC-MS applications.
Hoyle Medium Base 500g
RM685.00Brand:
Thermo ScientificTM OxoidTM
- Oxoid Hoyle Medium Base is used for isolation and differentiation of Corynebacterium diphtheriae Types.
- Requires addition of Potassium Tellurite 3.5%, Part No. SR0030J
Hoyle Medium Base, Oxoid Composition
| Typical Formula* |
gm/litre |
| `Lab-Lemco’ powder |
10.0 |
| Peptone |
10.0 |
| Sodium chloride |
5.0 |
| Agar |
15.0 |
| pH 7.8 ± 0.2 @ 25°C |
|
Hoyle Medium, Oxoid Preparation:
Suspend 40g in 1 litre of distilled water and bring to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes. Cool to 55°C and add 50ml of Laked Horse Blood SR0048 and 10ml of 3.5% Potassium Tellurite solution SR0030, mix, and pour plates.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared plates at 2-8°C.
Precautions
It should be noted that not all corynebacteria produce the typical colonies described above – so in all cases it is advisable to use Hoyle medium in conjunction with the additional media and tests mentioned above.
Kanamycin Sulphate Supplement 1 x 10 Vials
RM465.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Kanamycin Sulphate Supplement (10mg/vial) is added to Kanamycin Esculin Azide Agar Base, Part No. CM0591B.
Kanamycin Sulphate Supplement, Oxoid Composition
| Vial contents (each vial is sufficient for 500ml of medium) |
per vial
|
per litre
|
| Kanamycin sulphate |
10.0mg |
20.0mg |
Kanamycin Aesculin Azide Agar, Oxoid Preparation:
Add 2ml of sterile distilled water to one vial and mix gently to dissolve completely. Add the contents to 500ml of Kanamycin Aesculin Azide Agar Base.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared media at 2-8°C.
Mup5 Mupirocin
RM0.00Brand:
Thermo ScientificTM OxoidTM
Tryptone T 500g
RM480.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Tryptone T peptone developed with Lower ion Levels is ideal for the production of toxin by Clostridium tetani.
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM152.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
Price range: RM424.00 through RM673.00Brand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
OEM SeaKem® LE Agarose
RM1,514.00Brand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
Applications
Content & Storage
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Brand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available
FEATURED PRODUCTS
Non fullerene acceptor Y6 – Sigma-Aldrich
RM2,016.00Brand:
Sigma-Aldrich
Synonyms
BTP-4F, Y6, PCE 157
CAS No
2304444-49-1
General Description
Non-fullerene acceptors (NFAs) are currently a major focus of research in the development of bulk-heterojunction organic solar cells (OSCs). In contrast to the widely used fullerene acceptors (FAs), the optical properties and electronic energy levels of NFAs can be designed and readily tuned. NFA-based OSCs can also achieve greater thermal stability and photochemical stability, as well as longer device lifetimes, than their FA-based counterparts.Recent developments have led to a rapid increase in power conversion efficiencies for NFA OSCs, with values now exceeding 15% in a single junction cell, and >17% for a tandem cell, demonstrating the viability of using NFAs to replace FAs in next-generation high-performance OSCs.
Y6 is a non-fullerene acceptor-donor-acceptor (A-D-A) type small molecular acceptor (SMA) with flexible alkyl chains and a centrally fused ring. It has a ladder-type electron-deficient core, which can be blended with PM6 for organic photovoltaic applications.
Applications
Y6 is a non-fullerene acceptor (NFA) that uses an electron-deficient molecular core to obtain a low band gap with improved electron affinity. OPV devices made from Y6 can reach exceptionally high performances in single-junction devices, with a maximum PCE reported of 15.7% (14.9% certified by Enli Tech Laboratory) when paired with PM6. Y6 is versatile and can be employed in both conventional and inverted OPV device architectures and can maintain a high PCE with varying active layer thicknesses (13.6% in thick 300 nm layers).
Y6 is used as an electron acceptor material in organic solar cells. It has shown promising results in improving the power conversion efficiency of organic solar cells. Y6 and its derivatives are also used in material engineering studies to understand the relationships between molecular structure, morphology and device performance in organic photovoltaics.
Glutathione, Certified Reference Material (Sigma-Aldrich)
RM628.00Brand:
Sigma-Aldrich
Description
CAS number: 70-18-8
Chemical Formula: H2NCH(CO2H)CH2CH2CONHCH(CH2SH)CONHCH2CO2H
Molar Mass: 307.32g/mol
Synonyms: γ-L-Glutamyl-L-cysteinyl-glycine, L-Glutathione reduced, GSH
Amino Acid Sequence
γ-Glu-Cys-Gly
General description
Glutathione (GSH) is the most important nonprotein thiol widely distributed in animal tissues, plants, and microorganisms. GSH is also a key determinant of redox signalling and protection against oxidative stress.
Pharmaceutical secondary standards for application in quality control, provide pharma laboratories and manufacturers with a convenient and cost-effective alternative to the preparation of in-house working standards.
Application
HPLC: suitable
Gas Chromatography (GC): suitable
These Secondary Standards are qualified as Certified Reference Materials. These are suitable for use in several analytical applications including but not limited to pharma release testing, pharma method development for qualitative and quantitative analyses, food and beverage quality control testing, and other calibration requirements.
May be used at 5-10 mM to elute glutathione S-transferase (GST) from glutathione agarose.
Biochem/physiol Actions
Endogenous antioxidant that plays a major role in reducing reactive oxygen species formed during cellular metabolism and the respiratory burst. Glutathione-S-transferase catalyzes the formation of glutathione thioethers with xenobiotics, leukotrienes, and other molecules that have an electrophilic center. Glutathione also forms disulfide bonds with cysteine residues in proteins. Via these mechanisms, it can have the paradoxical effect of reducing the efficacy of anti-cancer agents.
Lithium nickel manganese cobalt oxide, powder, <0.5 μm particle size, >98% – Sigma-Aldrich
RM1,318.00Brand:
Sigma-Aldrich
Synonyms
NMC
General Description
Lithium nickel manganese cobalt oxide (NMC) is a class of electrode material that can be used in the fabrication of lithium-ion batteries. Lithium-ion batteries consist of anode, cathode, and electrolyte with a charge-discharge cycle. These materials enable the formation of greener and sustainable batteries for electrical energy storage.
We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product has been enhanced for energy efficiency. Find details here.
Applications
NMC is a novel lithium insertion electrode material for advanced lithium-ion batteries. Mn doping significantly increases the thermal stability besides increasing the electrochemical charge-discharge behavior.
NMC111 (lithium nickel-manganese-cobalt oxide with a stoichiometry of 1:1:1) is a promising cathode material used in advanced lithium-ion batteries, particularly for electric vehicle applications, due to its high energy density and long cycle life. NMC111 powder has a layered crystal structure that enables efficient, reversible lithium-ion diffusion, which is essential for good electrochemical performance. Manganese doping improves the thermal stability of the material while enhancing its electrochemical charge-discharge behavior. Compared to other NMC materials, NMC111 has a higher thermal stability and is less prone to thermal runaway, making it a safer option for battery applications.
Features & Benefits
Our NMC111 has engineered improvements over other LiNMC materials including thermal stability and high conductivity:
- More Reliable
- Longer Cycle Life
- Bulk and Pilot Scale Available
Legal Information
Product of Engi-Mat Co.
Cn120 Gentamicin
RM0.00Brand:
Thermo ScientificTM OxoidTM
CCDA Selective Supplement 10×2 Litres
RM0.00Brand:
Thermo ScientificTM OxoidTM
Oxoid CCDA Selective Supplement is used for the isolation of Campylobacter spp., especially C. upsaliensis or Arcobacter.
- For the isolation of Arcobacter spp., add to Arcobacter Broth Base, Part No. CM0965B
- For the isolation of Campylobacter spp., especially C. upsaliensis, add to Campylobacter Blood-Free Selective Agar Base (CCDA Preston), Part No. CM0739B
CCDA Selective Supplement, Oxoid Composition
| Vial contents (each vial is sufficient for 500ml of medium) |
per vial
|
per litre
|
| Cefoperazone |
16mg |
32mg
|
| Amphotericin B |
5mg |
10mg
|
Campylobacter Blood-Free Selective Agar, Oxoid Preparation:
Suspend 22.75g of Campylobacter Blood-Free Selective Agar Base in 500ml of distilled water and bring to the boil to dissolve. Sterilise by autoclaving at 121°C for 15 minutes. Cool to 50°C. Aseptically add 1 vial of CCDA Selective Supplement SR0155 reconstituted as directed. Mix well and pour into sterile Petri dishes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the selective supplement in the dark at 2-8°C and use before the expiry date on the label.
The prepared medium may be stored for up to 2 weeks at 2-8°C .
Minoxidil Related Compound E United States Pharmacopeia (USP) Reference Standard (Sigma-Aldrich)
RM9,568.00Brand:
Sigma
Description
CAS Number : 24867-26-3
Concentration : 10,000 × in DMSO
These products are for test and assay use only. They are not meant for administration to humans or animals and cannot be used to diagnose, treat, or cure diseases of any kind.
MacConkey Broth (Purple) (CM5a) 500g
RM517.00Brand:
Thermo ScientificTM OxoidTM
Detect coliform organisms in water and milk examination with Thermo Scientific™ Oxoid™ MacConkey Broth Purple (Dehydrated). Bromocresol purple indicator in the medium provides more sensitive and definite indications of acid production as compared to neutral red indicator and is less inhibitory to Escherichia coli. The use of bromocresol purple corresponds to the alternative formulations recommended in ‘The Bacteriological Examination of Water Supplies’ and ‘International Standard for Drinking Water’.
MacConkey Broth Purple, Oxoid Composition
| Typical Formula* |
gm/litre |
| Peptone |
20.0 |
| Lactose |
10.0 |
| Bile salts |
5.0 |
| Sodium chloride |
5.0 |
| Bromocresol purple |
0.01 |
| pH 7.4 ± 0.2 @ 25°C |
MacConkey Broth Purple, Oxoid Preparation:
To prepare single strength broth add 40g to 1 litre of distilled water. Distribute into containers fitted with fermentation (Durham) tubes. Sterilise by autoclaving at 121°C for 15 minutes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at room temperature.
FD10 Fusidic Acid
RM80.00Brand:
Thermo ScientificTM OxoidTM
BactiCard Neisseria 25TST/KT
RM0.00Brand:
Thermo Scientific™ Remel™
Thermo Scientific™ Remel BactiCard Neisseria uses enzyme technology for presumptive identification of pathogenic Neisseria spp. and Moraxella catarrhalis isolated on selective media.
ICP multi-element standard solution IV (Merck)
RM0.00Brand:
Merck
CAS no.: 10421-48-4, 10124-37-5, 10022-31-8, 10141-05-6, 13548-38-4, 10377-66-9, 10377-60-3, 10099-74-8, 13473-90-0, 69365-72-6, 7790-69-4, 7697-37-2, 7761-88-8, 13770-61-1, 10042-76-9, 7631-99-4, 7757-79-1, 3251-23-8, 13138-45-9, 10102-45-1, 10361-44-1, 10325-94-7, 7779-88-6, 10043-35-3
No. of Elements: 23 elements in diluted nitric acid 1000 mg/l
Elements in the Standard: Ag, Al, B, Ba, Bi, Ca, Cd, Co, Cr, Cu, Fe, Ga, In, K, Li, Mg, Mn, Na, Ni, Pb, Sr, Tl, Zn Certipur®
Synonym: Nota 1 A
Quality level: MQ100
Product specification and SDS for ICP multi-element standard solution IV.
100 bp DNA Ladder, NEB
Brand:
New England Biolabs
This product is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
- Size range: 100 bp – 1,517 bp
- Supplied with free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy-to-identify reference bands
- Value pricing
- Small size suitable for 100 gel lanes; large size suitable for 500 gel lanes
Wilkins Chalgren Anaerobe Agar 500g
RM581.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Wilkins-Chalgren Anaerobe Agar is used for the growth of anaerobes and recommended for antimicrobial susceptibility testing of anaerobes.
Wilkins-Chalgren Anaerobe Agar, Oxoid Composition
| Typical Formula* |
gm/litre |
| Tryptone |
10.0 |
| Gelatin peptone |
10.0 |
| Yeast extract |
5.0 |
| Glucose |
1.0 |
| Sodium chloride |
5.0 |
| L-Arginine |
1.0 |
| Sodium pyruvate |
1.0 |
| Menadione |
0.0005 |
| Haemin |
0.005 |
| Agar |
10.0 |
| pH 7.1 ± 0.2 @ 25°C |
Wilkins-Chalgren Anaerobe Agar, Oxoid Preparation:
Suspend 43g in 1 litre of distilled water. Bring to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared plates of medium at 2-8°C away from light.
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM152.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
Price range: RM424.00 through RM673.00Brand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
OEM SeaKem® LE Agarose
RM1,514.00Brand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
Applications
Content & Storage
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Brand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available
PRODUCT CATEGORIES
OUR BRANDS
DISTRIBUTION PARTNERS
LabMal is the online distribution of life science and biotechnology products, including microbiology, molecular biology, cell biology, general lab equipment, plastic consumables, chemical, cleansing solution and protein. If you are interested in the products from our distribution partners that are not available in Labmal, please contact us at 03-8051 5106 or info@labmal.com.
