LabMal specialises in online distribution of life science products & services, lab consumables and general lab equipment.
FEATURED PRODUCTS
n-Hexane EMPLURA® (Merck)
RM0.00Brand:
Merck
Description
CAS number: 110-54-3
Linear Formula: CH₃(CH₂)₄CH₃
Molecular Weight 86.18 g/mol
EMPLURA® is our low-cost alternative to high-purity qualities. With EMPLURA® we offer a range of solvents for a plurality of basic applications in non-regulated industries and for less demanding applications, preparative laboratory work and cleaning purposes. EMPLURA® solvents provide adequate specifications with the most important parameters.
Application
For basic applications in non-regulated industries and for less demanding applications, preparative laboratory work and cleaning purposes.
Tetracycline 256 M.I.C.E. (10 Pack)
RM0.00Brand:
Thermo ScientificTM OxoidTM
**This product is not available at the moment.
Effortlessly establish accurate Minimum Inhibitory Concentration (MIC) values manually using Thermo Scientific™ Oxoid™ Tetracycline M.I.C.Evaluator Strips (M.I.C.E.™).
VRE Broth Base 500g
RM0.00Brand:
Thermo ScientificTM OxoidTM
This product has been discontinued. Please contact us for more information.
- Oxoid VRE Broth Base (Vancomycin Resistant Enterococci Broth Base) is for selective isolation of vancomycin-resistant enterococci and high Level aminoglycoside-resistant enterococci.
- Also available Meropenem Selective Supplement, Part No. SR0184E; Gentamicin Selective Supplement, Part No. SR0185E; and Vancomycin Selective Supplement, Part No. SR0186E.
VRE Broth Base, Oxoid Composition
| Typical Formula* |
gm/litre |
| Calf brain infusion solids |
12.5 |
| Beef heart infusion solids |
5.0 |
| Proteose peptone |
10.0 |
| Glucose |
2.0 |
| Sodium chloride |
5.0 |
| Disodium phosphate |
2.5 |
| pH 7.4 ± 0.2 @ 25°C |
|
VRE Broth, Oxoid Preparation:
Suspend 37.0g of VRE Broth Base in 1 litre of distilled water. Warm to dissolve completely, sterilise by autoclaving at 121°C for 15 minutes and cool to 50°C. Supplement the medium as shown in the table below. Then mix well and distribute into final sterile containers.
|
Supplement (mg per vial) |
Reconstitution Volume Sterile distilled water |
VRE Broth (per litre) |
|
Meropenem |
2ml |
2 vials |
|
Gentamicin |
3ml |
– |
|
Vancomycin |
2ml |
– |
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Prepared medium may be stored for up to two weeks at 2-8°C in the dark.
Precautions
VRE Broth Base, VRE Agar Base , Meropenem Supplement SR0184, Gentamicin Supplement SR0185 and Vancomycin Supplement SR0186 should only be used for in vitro diagnostic purposes. Do not use any of these beyond expiry date or if the products show any signs of deterioration.
Tigecycline 256 MICE (pack of 10)
RM0.00Brand:
Thermo ScientificTM OxoidTM
**This product is not available at the moment.
Effortlessly establish accurate Minimum Inhibitory Concentration (MIC) values manually using Thermo Scientific™ Oxoid™ Tigecycline M.I.C.Evaluator Strips (M.I.C.E.™).
Salmonella Selective Supplement
RM486.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Salmonella Selective Supplement is used for the presumptive identification of Salmonella species from clinical and food samples.
- Add to Chromogenic Salmonella Agar Base, Part No. CM1007B or Brilliance™ Salmonella Agar Base, Part No. CM1092B
- Each vial supplements 500mL of medium
Salmonella Selective Supplement, Oxoid Composition
| Vial Contents (each vial is sufficient for 500ml of medium) | per vial | per litre |
| Novobiocin |
2.5mg |
5mg |
| Cefsulodin |
6mg |
12mg |
Chromogenic Salmonella Agar, Oxoid Preparation:
Suspend 25g in 500ml of distilled water and add the contents of one vial of Salmonella Selective Supplement (SR0194) reconstituted as directed. Mix well and bring to the boil with frequent agitation. DO NOT AUTOCLAVE. DO NOT HOLD AT BOILING TEMPERATURE. Cool to 50°C, mix well and pour into sterile Petri dishes.
Brilliance Salmonella Agar, Oxoid Preparation:
Suspend 27g of Brilliance Salmonella Agar Base in 500ml of distilled water. Add the contents of 1 vial of Salmonella Selective Supplement, resuspended as directed. Mix well and sterilise by bringing to the boil with frequent agitation. Cool to around 50ºC, mix well and pour into sterile Petri dishes.
NOTE: It is critical that the selective supplement is added prior to heating. When preparing volumes greater than 1 litre contact Oxoid Technical Support for directions.
Storage conditions and Shelf life
Salmonella Selective Supplement should be stored in the dark at 2-8ºC. When stored as directed, the un-opened products will remain stable until the expiry date printed on the packaging.
Cefotaxime 32 M.I.C.E. (10 Pack)
RM0.00Brand:
Thermo ScientificTM OxoidTM
**This product is not available at the moment.
Effortlessly establish accurate Minimum Inhibitory Concentration (MIC) values manually using Thermo Scientific™ Oxoid™ Cefotaxime M.I.C.Evaluator Strips (M.I.C.E.™).
Bile Salts 250g
RM832.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Bile Salts is a standardized ox-bile extract used as a selective inhibitory agent in culture media.
Lithium, granular, 99% trace metals basis – Sigma-Aldrich
Price range: RM534.00 through RM1,736.00Brand:
Sigma-Aldrich
Synonyms
Lithium atom, Lithium element
General Description
Granular lithium is a form of lithium metal that has been ground into small granules. Lithium is a soft, silver-white metal that is highly reactive and flammable. Lithium has a low density of 0.534 g/cm3, which makes it one of the lightest metals. Like the other alkali metals, lithium has a low melting point (180 °C) and is a good conductor of electricity and heat. Granular lithium is highly reactive and behaves as a strong reducing agent. It must be handled with caution due to its potential to ignite or explode. Lithium reacts readily with water and oxygen to form lithium hydroxide and lithium oxide, respectively, and even reacts with nitrogen gas at room temperature, forming lithium nitride. Typically, lithium is stored in an argon glovebox and airtight containers to prevent exposure to moisture, air, and nitrogen. To make granular lithium, the metal is first extracted from ores such as spodumene or lepidolite using a process called lithium carbonate conversion. After the lithium has been purified to a high degree of purity, it is milled into granules by rotating blades.
Lithium is a low-density alkali metal that is widely used as an anode material in rechargeable and non-rechargeable batteries. It is also used to alloy with aluminum and magnesium to make them stronger and lighter.
Applications
Lithium can be used as:
- A precursor to synthesize Li-based alloys such as LiAl and LiSi alloys, which are applicable as anode materials in the field of energy conversion and storage.
- A reducing agent in the reduction of zirconium oxide compounds in molten LiCl salt.
- As starting material to synthesize a reducing agent(1,4-bis(trimethylgermyl)-1.4-dihydropyrazine), for the fabrication of nickel metal films.
Sodium Molybdate 2H2O, AR, 500g
RM185.00Brand:
Chemiz
Description
Synonyms: Molybdic acid sodium salt dihydrate
Formula: Na2MoO4 · 2H2O
Sodium molybdate dihydrate is basic in nature. Its crystal belongs to the orthorhombic crystal system and space group Pbca. This chemical is used in various industry for corrosion inhibition as it is a non-oxidizing anodic inhibitor.
Note:
AR: Analitycal Reagent Grade: Reagents for analytical purpose or research work that need high purity.
CP: Chemically Pure Grade: Reagents for regular practical in its original purity.
Hard carbon, electrode sheet, copper substrate, size 5 in. × 10 in. – Sigma-Aldrich
RM1,299.00Brand:
Sigma-Aldrich
Synonyms
Hard carbon anode, Sodium-ion anode
General Description
Hard carbon electrode sheet is an electrode film of activated carbon cast on copper. Hard carbon is a low-density material with extremely high microporosity. Standard electrode sheets are 5 inches x 10 inches (127 mm x 254 mm) and cast single-sided on 10 µm thick copper foil current collectors. The composition of the electrode film is 90% graphite, 5% poly(vinylidene fluoride) [PVDF] and 5% Super P. PVDF acts as binder due to its thermal and electrochemical stability and strong adhesive properties.
We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product has been enhanced for energy efficiency. Click here for more information.
Application
Our hard carbon electrode sheet is a ready-to-use anode for alkali metal ion batteries such as sodium ion batteries (SIBs), lithium ion batteries (LIBs), and potassium ion batteries. Hard carbon is the anode of choice for sodium-ion batteries, where the use of graphite as an anode in SIBs is inhibited by the inability of sodium ions to form a binary graphite intercalation compound. Hard carbon offers a low insertion/deinsertion potential (~0.1 V Na/Na+) ideal for achieving high voltages. With an experimental capacity of 240 mAh/g and areal capacity of 2.32 mAh/cm2, our electrodes demonstrate outstanding electrochemical performance.
Peptone Bacteriological 500g
RM332.00Brand:
Thermo ScientificTM OxoidTM
The Oxoid Peptone Bacteriological is for use whenever a high quality bacteriological peptone is required.
- A nutritious, all-purpose peptone specially prepared for use with other refined culture media ingredients
MKTTn BROTH BASE (ISO) 500g
RM384.00Brand:
Thermo ScientificTM OxoidTM
Selectively isolate Salmonella species from food samples with Thermo Scientific™ Muller-Kauffmann Tetrathionate-Novobiocin Broth (MkTTn) for food testing in compliance with ISO 6579:2002.
Muller-Kauffmann Tetrathionate-Novobiocin Broth (MkTTn), Oxoid Composition
| Typical Formula* |
gm/litre
|
|
| Meat extract |
4.3 |
|
| Enzymatic digest of casein |
8.6 |
|
| Sodium chloride |
2.6
|
|
| Calcium carbonate |
38.7
|
|
| Sodium thiosulphate (anhydrous) |
30.5†
|
|
| Ox bile |
4.78
|
|
| Brilliant green |
0.0096
|
|
| pH 8.0 ± 0.2 @ 25°C |
|
|
Muller-Kauffmann Tetrathionate-Novobiocin Broth (MkTTn), Oxoid Preparation:
Suspend 89.5g of MKTTn in 1 litre of distilled water, mix well and bring to the boil. Cool to below 45°C. Immediately before use add 20ml of iodine-iodide solution prepared by dissolving 25g of potassium iodide in 10ml of water, adding 20g of iodine and then diluting to 100ml with sterile water. Also add the contents of four vials of Oxoid Novobiocin Selective Supplement SR0181 reconstituted as directed. Mix well and aseptically dispense into sterile containers.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared media at room temperature. The prepared medium in its final form containing iodine/iodide solution + Novobiocin Selective Supplement SR0181 should be used immediately.
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM143.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
Price range: RM395.00 through RM627.00Brand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
OEM SeaKem® LE Agarose
RM1,514.00Brand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
Applications
Content & Storage
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Brand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available
FEATURED PRODUCTS
Listeria Selective Enrich Supplement 10×2.25 Litres
RM1,628.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Listeria Selective Enrichment Supplement, Modified is used for the enrichment of Listeria spp.
- Modified with 10mg/L acriflavin
- Add to Listeria Enrichment Broth, Part No. CM0862B
- Each vial supplements 2.25L of medium
Listeria Selective Enrichment Supplement (Modified), Oxoid Composition
| Vial contents (each vial is sufficient for 2,250mls of medium) |
per vial
|
per litre
|
| Nalidixic acid |
90.0mg |
40.0mg
|
| Cycloheximide |
112.5mg |
50.0mg
|
| Acriflavine hydrochloride |
22.5mg |
10.0mg
|
Listeria Selective Enrichment Medium Preparation:
Aseptically add 10ml of distilled water to one vial and invert gently to dissolve. Add the vial contents to 2.25 litres of Listeria Enrichment Broth Base. Sterilize by autoclaving at 121°C for 15 minutes. Cool to 50°C, mix well and distribute into sterile containers in volumes as required .
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
Karmaili Agar Base 500g
RM521.00Brand:
Thermo ScientificTM OxoidTM
- Oxoid Campylobacter Karmaili Agar Base is a blood-free selective medium for the isolation of Campylobacter jejuni and Campylobacter coli when incubated at 42°C.
- Also available Campylobacter Selective Supplement (Karmaili), Part No. SR0167E and Modified Karma-i-li Selective Supplement, Part No. SR0205E.
Campylobacter Karmaili Agar Base, Oxoid Composition
| Typical Formula* |
gm/litre |
| Columbia Agar Base |
39.0 |
| Activated charcoal |
4.0 |
| Haemin |
0.032 |
| Final pH 7.4 ± 0.2 @ 25°C |
|
Campylobacter Agar (Karmali), Oxoid Preparation:
Add 21.5g of Campylobacter Agar Base (Karmali) to 500ml of distilled water and bring to the boil to dissolve. Sterilise by autoclaving at 121°C for 15 minutes. Cool to 50°C. Aseptically add 1 vial of Campylobacter Selective Supplement (Karmali) SR0167 or Modified Karmali Selective Supplement SR0205, reconstituted as directed.. Mix well and pour into sterile Petri dishes.
Storage conditions and Shelf life
Campylobacter Agar Base (Karmali) should be stored tightly capped in the original container in a cool, dry place away from bright light. When stored at 10-30°C the medium will remain stable until the expiry date printed on the label.
TGT8XMINI Teaching Gel Tank
Brand:
Cleaver Scientific
These industry standard tanks come in four sizes -to run eight, six, four or a single gel. The gel trays are UV transparent and measure 7x7cm, each tank comes with two combs and two casting dams per gel tray. Supplied with highly flexible cable and connectors which are CE compliant, providing complete electrical isolation and safety. They have a special manufactured safety cover, which completely covers the tank of the system, making it one of the safest available.
DMEM with High Glucose without L-Glutamine without Phenol Red 500ml
RM429.00Brand:
Lonza
Product Overview
DMEM is a modification of Basal Medium Eagle (BME) that contains four-times the concentrations of the amino acids and vitamins.
The formulation first contained 1000 mg/L of glucose and was used to culture embryonic mouse cells. DMEM media is suitable for most types of cells, including human, monkey, hamster, rat, mouse, chicken and fish cells.The high glucose version is well suited to high density suspension culture.
Content
Plate Count Agar/Skim Milk Powder 500g
RM730.00Brand:
Thermo ScientificTM OxoidTM
Isolate and enumerate microorganisms in milk and dairy products with Thermo Scientific™ Oxoid™ Milk Plate Count Agar (Dehydrated). Milk Plate Count Agar is equivalent to the medium recommended by British Standard Institution and International Organization for Standardization.
Milk Plate Count Agar (Dehydrated), Oxoid Composition
| Typical Formula* |
gm/litre |
| Tryptone |
5.0 |
| Yeast extract |
2.5 |
| Glucose |
1.0 |
| Antibiotic free skim milk |
1.0 |
| Agar |
10.0 |
| pH 6.9 ± 0.1 @ 25°C |
Milk Plate Count Agar (Dehydrated), Oxoid Preparation:
Suspend 19.5g in 1 litre of distilled water. Bring to the boil with frequent agitation, mix and distribute into final containers. Sterilise by autoclaving at 121°C for 15 minutes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared plates at 2-8°C.
2-Propanol, for analysis EMSURE® ACS,ISO,Reag. Ph Eur (Merck)
Price range: RM58.00 through RM133.00Brand:
Merck
CAS no.: 67-63-0
Grade: ACS,ISO,Reag. Ph Eur
Chemical Formula: CH₃CH(OH)CH₃
Synonym: Isopropyl alcohol, Isopropanol, iso-Propanol, IPA
Quality level: MQ300
Thioglycollate Fluid Medium Usp 500g
RM331.00Brand:
Thermo ScientificTM OxoidTM
Cultivate aerobic and anaerobic organisms in the performance of sterility tests with Thermo Scientific™ Oxoid™ Thioglycollate Medium (USP) (Dehydrated). The medium is prepared according to the formula specified in the US Pharmacopoeia for the performance of sterility tests, and conforms to formulations detailed in the British and European Pharmacopoeia.
Thioglycollate Medium (USP) (Dehydrated), Oxoid Composition
| Formula |
gm/litre |
| Yeast extract |
5.0 |
| Tryptone |
15.0 |
| Glucose |
5.5 |
| Sodium thioglycollate |
0.5 |
| Sodium chloride |
2.5 |
| L-cystine |
0.5 |
| Resazurin |
0.001 |
| Agar |
0.75 |
| pH 7.1 ± 0.2 @ 25°C |
Thioglycollate Medium (USP) (Dehydrated), Oxoid Preparation:
Suspend 29.75 g in 1 litre of distilled water. Bring to the boil to dissolve completely. Distribute into final containers, sterilise by autoclaving at 121°C for 15 minutes. Mix well and cool to room temperature.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium away from light at room temperature.
Precautions
If the upper portion of the medium is red because of oxidation, anaerobic conditions can be restored by reheating for 10 minutes in boiling water or steam. Do not reheat more than once.
Following reheating, if more than one-third of the medium is oxidised then it should be discarded.
Some glucose-fermenting organisms which are able to reduce the pH of the medium to a critical level may not survive in this medium. Early subculture is necessary to isolate these organisms.
Magnesium Sulfate (MgSO4) Solution – 6.0 ml
RM0.00Brand:
New England Biolabs
100 mM MgSO4 for use in conjunction with polymerase reaction buffers.
MicroPette Plus 8-Channel Pippettes
Brand:
Biologix
This product is not available at the moment. Please contact us for more information.
Characteristics
- Ergonomic design for comfortable extended use
- Easy-to-read display
- Fully mechanical function
- Convenient one-handed operation
- Easy to calibrate and maintain with included tool
Phosphate Buffered Saline Powder, pH 7.4, For Preparing 1 L solutions, Sigma
RM51.00Brand:
Sigma-Aldrich
Application
• Phosphate buffered saline has been used in the washing solutions during immunofluorescence procedure.
• It has been used for the suspension of bacterial cells.
• It has been used during the fixation and immunostaining procedures.
Reconstitution
Contents of one pouch, when dissolved in one liter of distilled or deionized water, will yield 0.01 M phosphate-buffered saline (NaCl 0.138 M; KCl – 0.0027 M); pH 7.4, at 25 °C.
Immobilon® Block
Price range: RM851.00 through RM1,023.00Brand:
Merck
Description
Immobilon® Block Noise Cancelling Reagents are designed especially for Western blotting applications. This family of protein-free, ready-to-use buffers has been optimized to reduce background levels when using chemiluminescence, fluorescent, or phosphotyrosine detection. Bløk buffers are ideal for use with Immobilon®-P Western blotting membranes and the SNAP i.d.® system, and are also compatible with standard Western blotting techniques.
T4 DNA Ligase, NEB
Brand:
New England Biolabs
Characteristics of T4 DNA Ligase, NEB:
- Catalyzes the formation of a phosphodiester bond between juxtaposed 5′ phosphate and 3′ hydroxyl termini in duplex DNA or RNA.
- This enzyme will join blunt end and cohesive end termini as well as repair single-stranded nicks in duplex DNA and some DNA/RNA hybrids (1).
- T4 DNA ligase will seal nicks for these DNA substrates.
- The industry standard for performance and quality
- Not sure which ligase to choose? Refer to our DNA and RNA Ligase Properties Chart
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM143.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
Price range: RM395.00 through RM627.00Brand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
OEM SeaKem® LE Agarose
RM1,514.00Brand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
Applications
Content & Storage
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Brand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available
PRODUCT CATEGORIES
OUR BRANDS
DISTRIBUTION PARTNERS
LabMal is the online distribution of life science and biotechnology products, including microbiology, molecular biology, cell biology, general lab equipment, plastic consumables, chemical, cleansing solution and protein. If you are interested in the products from our distribution partners that are not available in Labmal, please contact us at 03-8051 5106 or info@labmal.com.
