LabMal specialises in online distribution of life science products & services, lab consumables and general lab equipment.
FEATURED PRODUCTS
TE Buffer Solution pH 8.0 (Merck)
RM325.00Brand:
Merck
Description
1X TE Solution, pH 8.0 (10mM TRIS-HCl, 1mM EDTA). Molecular Biology grade.
Specifications:
Conductivity at 25°C: 775-975 µmho
DNase: None detected
pH of solution at 25°C: 7.90-8.10
Protease: None detected
RNase: None detected
Magnesium chloride hexahydrate AR, 500g
RM29.00Brand:
Chemiz
Description
Synonyms: Denatured ethyl alcohol
Formula: MgCl2 · 6H2O
Magnesium chloride hexahydrate has been used in wash buffer for the purification of protein from S. cerevisiae. It has also been used as a supplement to study the desiccation effect on bacterial viability.
Note:
AR: Analitycal Reagent Grade: Reagents for analytical purpose or research work that need high purity.
CP: Chemically Pure Grade: Reagents for regular practical in its original purity.
Pre-Supplemented DRBC (ISO) Agar
RM1,131.00Brand:
Thermo ScientificTM OxoidTM
Isolate and enumerate yeasts and molds associated with food spoilage with Thermo Scientific™ Oxoid™ Pre-supplemented Dichloran Rose-Bengal Chloramphenicol (DRBC) (ISO) Agar Base (Dehydrated) while adhering to ISO 21527-1: 2008. Due to the presence of antibiotic Chloramphenicol in the formulation, the medium provides selectivity against bacteria as well as reducing harmful chemical handling in the laboratory.
Pre-supplemented Dichloran Rose-Bengal Chloramphenicol (DRBC) (ISO) Agar Base (Dehydrated), Oxoid Composition
| Typical Formula* |
gm/litre |
| Peptone |
5.0 |
| Glucose |
10.0 |
| Potassium dihydrogen phosphate |
1.0 |
| Magnesium sulphate |
0.5 |
| Dichloran |
0.002 |
| Rose-bengal |
0.025 |
| Agar |
15.0 |
| Chloramphenicol |
0.1 |
| pH 5.6 ± 0.2 @ 25°C |
Pre-supplemented Dichloran Rose-Bengal Chloramphenicol (DRBC) (ISO) Agar, Oxoid Preparation:
Suspend 15.75g per 500ml (31.5g/l) of distilled water and heat to dissolve completely. Sterilize by autoclaving at 121°C for 15 minutes. Cool to 50°C, mix well and pour into sterile Petri dishes. It is advised to dispense the powdered medium into containers under an extraction hood due to the chloramphenicol in the medium base.
Storage instructions
Store the dehydrated medium at 10–30°C and use before the expiry date
Precautions
ROSE-BENGAL PHOTO-OXIDIZES TO FORM TOXIC COMPOUNDS. STORE PLATES OF THE MEDIUM IN THE DARK AND AVOID EXPOSURE TO LIGHT.
Some strains of fungi may be inhibited on this medium.
The dichloran compound used in this medium is Botran® 2,6-Dichloro-4-Nitro-Analine (CAS: 99-30-9).
Pre-supplemented DRBC (ISO) Agar (CM1149) contains Chloramphenicol in the base powder and is therefore considered a toxic compound which should be handled in accordance with good industrial hygiene and safety practice. Always consult the MSDS before handling the powder.
Penicillin 256 M.I.C.E. (50 Pack)
RM0.00Brand:
Thermo ScientificTM OxoidTM
**This product is not available at the moment.
Effortlessly establish accurate Minimum Inhibitory Concentration (MIC) values manually using Thermo Scientific™ Oxoid™ Penicillin G M.I.C.Evaluator Strips (M.I.C.E.™).
Chloramphenicol Supplement 500ml
RM315.00Brand:
Thermo ScientificTM OxoidTM
For the isolation of yeast and molds associated with spoilage, add Oxoid Chloramphenicol Selective Supplement to DRBC Agar Base, Part No. CM0727B; for the enumeration of yeast and molds in foods, add to Rose Bengal Chloramphenicol Agar Base, Part No. CM0549B.
Chloramphenicol Selective Supplement, Oxoid Composition
| Vial contents |
SR0078E |
per litre
|
| Chloramphenicol |
50mg |
100mg
|
Chloramphenicol Selective Medium, Oxoid Preparation:
Reconstitute one vial SR0078E per 500ml medium as directed. Add the vial contents to base medium and mix gently. Sterilise by autoclaving (see media for full details), cool to 50°C, mix gently and pour into Petri dishes.
Stuart Transport Medium (Modified) 500g
RM881.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Stuart Transport Medium is a semi-solid non-nutritional transport medium for fastidious, pathogenic organisms.
Stuart Transport Medium, Oxoid Composition
| Typical Formula* |
gm/litre |
| Sodium glycerophosphate |
10.0 |
| Sodium thioglycollate |
0.5 |
| Cysteine hydrochloride |
0.5 |
| Calcium chloride |
0.1 |
| Methylene blue |
0.001 |
| Agar |
5.0 |
| pH 7.4 ± 0.2 @ 25°C |
Stuart Transport Medium, Oxoid Preparation:
Suspend 16g in 1 litre of distilled water. Bring to the boil to dissolve completely and dispense into screw-capped 7ml bottles. Fill each bottle to the brim, tighten the cap and sterilise by autoclaving at 121°C for 15 minutes. When sufficiently cool to handle, mix by inversion.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 15-25°C.
Precautions
A small amount of blue colour at the top of the bottle indicates oxidation. If this colour extends down into the medium it should be discarded.
Avoid prolonged heating in open flasks, during the preparation of the medium, because thioglycollate is volatile.
Sodium glycerophosphate may be metabolised by some organisms and thus promote their growth.
Flatbed IEF System
RM0.00Now equipped with rehydration and focusing trays, the redesigned CSL-IEF has been optimised to perform first-dimension isoelectric focusing (IEF) with IPG (immobilised pH gradient) strips quickly, easily and reproducibly. An ideal entry-level system for both inexperienced and occasional IEF users, the CSL-IEF is also versatile enough to meet the needs of laboratories with increased throughput requirements.
X-VIVO™ 10 Serum-free Hematopoietic Cell Medium, xenofree
RM850.00Brand:
Lonza
Description
The X-VIVO™ 10 Media formulations are designed to support the generation of LAK cells in a serum-free environment. The original protocols involved the incubation of patient or normal donor peripheral blood lymphocytes (PBL) at 1.0 – 3.0 × 106 cells/ml for a period of 3 days in the presence of 1,000 Cetus units of rIL-2/ml. Optimal LAK cell generation is achieved when peripheral blood lymphocytes are incubated for 3 – 10 days at a density of 1.0 – 6.0 × 106 cells/ml in the presence of 100 – 1,000 Cetus units of rIL-2. X-VIVO™ 10 Media is available as a 1X liquid in two convenient formulations.
Key Applications:
-Proliferation of peripheral blood lymphocytes
-Proliferation of tumor infiltrating lymphocytes
-Cryopreservation of human tissue
-Cultivation of human monocytes and macrophages
-Cultivation of stem cells
-Cultivation of dendritic cells
Recombinant Albumin, Molecular Biology Grade
RM285.00Brand:
New England Biolabs
Recombinant Albumin (rAlbumin), Molecular Biology Grade, is a non-bovine derived albumin that can serve as an alternative to Bovine Serum Albumin (BSA). Like BSA, it has been shown to prevent adhesion of enzymes to reaction tubes and pipette surfaces. It also stabilizes some proteins during incubation. Choose Recombinant Albumin, when there is a need to avoid BSA.
Ala Disk 25disk/VL
RM0.00Brand:
Thermo Scientific™ Remel™
Thermo Scientific™ Remel ALA Disk is used for demonstration of porphyrin synthesis in Haemophilus spp.
Quick-Load Taq 2X Master Mix – 500 rxns
RM0.00Brand:
New England Biolabs
The industry standard
- Exceptional value in terms of cost per unit
- 2X master mix format for easy reaction setup – just add template DNA and primers
- Offered with inert tracking dyes for easy and direct loading of PCR products onto gels
Defibrinated Sheep Blood (25ML)
RM0.00Brand:
Thermo ScientificTM OxoidTM
Thermo Scientific™ Oxoid Defibrinated Sheep Blood is a blood product.
**This product is not available at the moment.
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM152.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
Price range: RM395.00 through RM627.00Brand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
OEM SeaKem® LE Agarose
RM1,514.00Brand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
Applications
Content & Storage
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Brand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available
FEATURED PRODUCTS
M-MuLV Reverse Transcriptase
Brand:
New England Biolabs
M-MuLV Reverse Transcriptase synthesizes a complementary DNA strand initiating from a primer using either RNA (cDNA synthesis) or single-stranded DNA as a template.
- Isolated from a recombinant source
- Supplied with 10X Reaction Buffer
- Tested for the absence of DNases and RNases
Lauryl Tryptose Broth 500g
RM226.00Brand:
Thermo ScientificTM OxoidTM
Detect coliform organisms in water, waste water and dairy products with selective Thermo Scientific™ Oxoid™ Lauryl Tryptose Broth (Dehydrated), while conforming to the formula detailed by American Public Health Association. Lauryl Tryptose Broth is designed to promote a rich growth and copious gas production from small inocula of coliform organisms.
Lauryl Tryptose Broth, Oxoid Composition
| Typical Formula* |
gm/litre |
| Tryptose |
20.0 |
| Lactose |
5.0 |
| Sodium chloride |
5.0 |
| Dipotassium hydrogen phosphate |
2.75 |
| Potassium dihydrogen phosphate |
2.75 |
| Sodium lauryl sulphate |
0.1 |
| pH 6.8 ± 0.2 @ 25°C |
|
Lauryl Tryptose Broth, Oxoid Preparation:
Dissolve 35.6g in 1 litre of distilled water and distribute into containers with fermentation tubes (Durham). Sterilise by autoclaving at 121°C for 15 minutes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at room temperature.
Precautions
If stored at 2-8°C the broth will become cloudy or form a precipitate. This should clear at room temperature but gas formation is the criterion of growth not turbidity.
Erythromycin 256 M.I.C.E. (10 Pack)
RM0.00Brand:
Thermo ScientificTM OxoidTM
**This product is not available at the moment.
Effortlessly establish accurate Minimum Inhibitory Concentration (MIC) values manually using Thermo Scientific™ Oxoid™ Erythromycin M.I.C.Evaluator Strips (M.I.C.E.™).
Cefotaxime 32 M.I.C.E. (10 Pack)
RM0.00Brand:
Thermo ScientificTM OxoidTM
**This product is not available at the moment.
Effortlessly establish accurate Minimum Inhibitory Concentration (MIC) values manually using Thermo Scientific™ Oxoid™ Cefotaxime M.I.C.Evaluator Strips (M.I.C.E.™).
Silicon, nanoparticles, nanoparticles, 10 nm avg. part. size, ≥99% trace metals basis, battery grade – Sigma-Aldrich
RM3,104.00Brand:
Sigma-Aldrich
Synonyms
SiNPs, Silicon nanopowder
Cas No.
7440-21-3
General Description
Our 10 nm silicon nanoparticles are a high-quality, ultrafine powder with a narrow particle size of 10 nm and a high surface area (~180 m2/g). It is produced by the laser gas phase synthetic method from high-purity silane to achieve high purity (>=99%) and a reliable particle size.
We are committed to bringing you Greener Alternative Products, which belong to one of the four categories of greener alternatives. This product has been enhanced for energy efficiency. Click here for more information.
Application
Silicon nanopowder is a promising material for use in advanced battery technologies. With its high theoretical capacity (4212 mAh/g), it has the potential to significantly improve the performance of lithium-ion batteries. The controlled particle size and high surface area of our silicon nanopowder make it an ideal candidate for use as an anode material in these batteries, allowing for improved charge and discharge rates, longer cycle life, and higher energy densities. Additionally, silicon nanopowder is being researched for use in other types of batteries, including sodium-ion and magnesium-ion batteries. Its unique properties make it a valuable material for developing next-generation battery technologies that offer higher performance, longer lifetimes, and lower costs.
Features & Benefits
Our silicon nanoparticles are designed for battery applications to extend cycle life and charge and discharge rates. We offer:
- Lowest Particle Size
- High Surface Area
- Consistent Quality
L-Ornithine Monohydrochloride for Biochemistry (Merck)
RM0.00Brand:
Merck
Description
CAS number: 3184-13-2
Linear Formula: C₅H₁₂N₂O₂ * ClH
Molecular Weight: 168.62
Synonym: L(+)-2,5-Diamino valeric acid hydrochloride
Application
L-Ornithine monohydrochloride for biochemistry.
Sodium Chloride Peptone Broth (Buffered) 500g
RM321.00Brand:
Thermo ScientificTM OxoidTM
Carry out microbial limit testing by harmonized methodology of pharmaceutical products in accordance with USP/EP/BP/JP with Thermo Scientific™ Oxoid™ Buffered Sodium Chloride Peptone Solution (Dehydrated). The combination of phosphate buffer, sodium chloride and peptone increases the viability of sensitive microorganisms by providing an isotonic environment. This is of particular importance when trying to recover cells that may be stressed or sensitive to osmotic pressure.
Buffered Sodium Chloride Peptone Solution (Dehydrated), Oxoid Composition
| ypical Formula |
gm/litre |
| Potassium dihydrogen phosphate |
3.56 |
| Disodium hydrogen phosphate anhydrous |
5.77† |
| Sodium chloride |
4.3 |
| Peptone (meat) |
1.0 |
| pH 7.0 ± 0.2 @ 25°C |
Buffered Sodium Chloride Peptone Solution (Dehydrated), Oxoid Preparation:
Suspend 14.63g of Sodium Chloride Peptone Broth (Buffered) in 1 litre of water (purified as required). If required, add 1-10ml Tween® 20 or 80 per litre of medium. Mix well and distribute into final containers. Sterilize by autoclaving at 121°C for 15 minutes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store prepared media at room temperature.
Pseudomonas Agar Base 500g
RM444.00Brand:
Thermo ScientificTM OxoidTM
Selectively isolate Pseudomonas species from a range of samples with Thermo Scientific™ Oxoid™ Pseudomonas Agar Base (Dehydrated). The medium is modification of King’s A Medium and contains magnesium chloride and potassium sulphate for improved pigment production and recovery of Pseudomonas aeruginosa while strongly suppressing Klebsiella, Proteus and Providencia spp.
Pseudomonas Agar Base (Dehydrated), Oxoid Composition
| Typical Formula* |
gm/litre |
| Gelatin peptone |
16.0 |
| Casein hydrolysate |
10.0 |
| Potassium sulphate |
10.0 |
| Magnesium chloride |
1.4 |
| Agar |
11.0 |
| pH 7.1 ± 0.2 @ 25°C |
Agar Preparation:
To Prepare the Agar Base:
Suspend 24.2g of the agar base, in 500ml of distilled water. Add 5ml of glycerol. Bring to the boil to dissolve completely, sterilise by autoclaving at 121°C for 15 minutes. Allow the medium to cool to 50°C.
To Prepare Pseudomonas CN Agar:
To 500ml of agar base cooled to 50°C add the contents of 1 vial of Pseudomonas CN Supplement (SR0102) rehydrated as directed. Mix well and pour into sterile Petri dishes.
To Prepare Pseudomonas CFC Agar:
To 500ml of agar base cooled to 50°C add the contents of 1 vial of Pseudomonas CFC Supplement (SR0103) rehydrated as directed. Mix well and pour into sterile Petri dishes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
Precautions
Fresh media should be prepared as required. Molten agar should not be kept longer than 4 hours. Medium should not be stored and remelted. If swarming colonies of Proteus species are a problem in food samples then the incubation temperature can be lowered to 20°C for a period of 3-5 days. Chilled foods may carry a wide range of pseudomonads and the colonies on CFC Medium, incubated at lower temperatures, may be Pseudomonas fluorescens or Pseudomonas putida as well as Pseudomonas aeruginosa. Aeromonas species will also appear as pink/brown colonies, particularly from fish products.
Urea CP, 500g
RM27.00Brand:
Chemiz
Description
Synonyms: Carbamide
Formula: NH2CONH2
Urea is a raw material used in the manufacture of many chemicals such as plastics and adhesives. It is highly soluble and has a pKa of almost 0.
Note:
AR: Analitycal Reagent Grade: Reagents for analytical purpose or research work that need high purity.
CP: Chemically Pure Grade: Reagents for regular practical in its original purity.
Zinc oxide, 99.99% trace metals basis – Sigma-Aldrich
RM929.00Brand:
Sigma-Aldrich
Synonyms
Zinc monoxide, Zinc white
Cas No.
1314-13-2
General Description
Zinc oxide is a multifunctional material with unique properties such as a high electrochemical coupling coefficient, high chemical stability, a broad range of radiation absorption, and biocompatibility. It is also a wide band gap (3.37 eV) semiconductor used in optoelectronics, ceramics, and laser technology. Owing to its piezo and pyroelectric properties, it can be used as a sensor, energy generator, and photocatalyst for hydrogen production.
Application
Employed in the preparation of NaZnSiO3OH, a novel chiral framework material which has potential application in ion exchange, adsorption or catalysis.
Zinc oxide can be used as a starting material to prepare:
- Schottky diodes are applied in radio-frequency energy-harvesting circuits.
- ZnO nanostructures for sensing applications. For example, it can be used to fabricate Cr2O3-ZnCr2O4 hetero-nanostructures for highly selective xylene sensors.
Lithium nickel cobalt aluminium oxide, electrode sheet, aluminum substrate, size 5 in. × 10 in. – Sigma-Aldrich
RM7,160.00Brand:
Sigma-Aldrich
Synonyms
NCA
General Description
Lithium nickel cobalt aluminium oxide (NCA) is a class of electrode material that can be used in the fabrication of lithium-ion batteries. Lithium-ion batteries consist of anode, cathode, and electrolyte with a charge-discharge cycle. These materials enable the formation of greener and sustainable batteries for electrical energy storage.
We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product has been enhanced for energy efficiency. Find details here.
Applications
NCA is Aluminum doped Lithium nickel cobalt oxide (LNCO). Al doping is found very effective to suppress the cell impedance rise by stabilizing the charge-transfer impedance on the cathode side besides increasing the thermal stability of the material. NCA shows excellent electrochemical performance.
The NCA casted electrode sheets can be cut into appropriate size and is ready to be used in lithium ion batteries.
Other Notes
Crystal Structure: Rhombohedral
Operating Condiditons:
- Recommended maximum charge voltage: 4.3 V vs Li/Li+
- Recommended maximum charge current: 4C
- Recommended cut-off voltage for discharge: 3.0 V vs Li/Li+
- Recommended charge method: constant current – constant voltage
1X and 10X TBE buffer (Tris-Borate-EDTA), Biobasic
Brand:
Bio Basic
Description
This product is currently not available. Please contact us for more information.
TBE buffer (Tris-Borate-EDTA, Biobasic) is commonly used in all DNA electrophoresis applications (both for acrylamide and for agarose gels). In general, TBE buffer offers better resolution of 0.1 to 3 kb fragments; whereas, TAE (Tris-Acetate-EDTA) buffer provides better resolution of fragments greater than 4 kb. Furthermore, TBE is better suited for high-voltage (>150V) electrophoresis because of its higher buffering capacity and lower conductivity than TAE. BIO BASIC INC. offers TBE in a number of different formats. 10X TBE liquid concentrate can be used to easily prepare a 1X TBE working solution by diluting with distilled, deionized water. 10X TBE Powder allows for the stable storage of the pre-mixed powder form that can be dissolved in distilled, deionized water to yield 1 liter each of 10X TBE buffer solution.
How to prepare a 10X TBE Buffer?
10X TBE buffer preparation is easy. Simply mix 10X TBE powder (SKU: A00269-500ml/A0026-4L) with an appropriate volume of distilled/deionized water. The 10X TBE buffer is ready to use now.
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM152.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
Price range: RM395.00 through RM627.00Brand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
OEM SeaKem® LE Agarose
RM1,514.00Brand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
Applications
Content & Storage
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Brand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available
PRODUCT CATEGORIES
OUR BRANDS
DISTRIBUTION PARTNERS
LabMal is the online distribution of life science and biotechnology products, including microbiology, molecular biology, cell biology, general lab equipment, plastic consumables, chemical, cleansing solution and protein. If you are interested in the products from our distribution partners that are not available in Labmal, please contact us at 03-8051 5106 or info@labmal.com.
