LabMal specialises in online distribution of life science products & services, lab consumables and general lab equipment.
FEATURED PRODUCTS
RapID NH System KT/20
RM455.00Brand:
Thermo Scientific™ Remel™
Identify over 30 taxa including Neisseria, Moraxella, Haemophilus, and related microorganisms in just four hours using the Thermo Scientific™ RapID™ NH System, an identification system based on enzyme technology.
Requires:
RapID Spot Indole, Part No. R8309002; RapID Nitrate A, Part No. R8309003; RapID Nitrate B Part No. R8309004; RapID Inoculation Fluid, Part No.R8325106
N-S Anaerobe Selective Supplement 1 x 10 Vials
RM0.00This product is not available at the moment. Please contact us for more information.
Oxoid N-S Anaerobe Selective Supplement is used for the growth of fastidious and other anaerobes.
N-S Anaerobe Selective Supplement , Oxoid Composition
| Vial contents (each vial is sufficient for 500 ml of medium) |
per vial
|
per litre
|
| Haemin |
2.5mg |
5.0mg |
| Menadione |
0.25mg |
0.5mg |
| Sodium pyruvate |
500mg |
1000mg |
| Nalidixic acid |
5.0mg |
10.0mg |
Selective Medium for Non-Sporing Anaerobes Preparation:
Suspend 21.5g of Wilkins-Chalgren Anaerobe Agar (CM0619) in 475ml of distilled water containing 0.5ml `Tween 80’. Bring to the boil to dissolve completely and sterilise by autoclaving at 121°C for 15 minutes. Cool to 50-55°C and aseptically add the contents of 1 vial of N-S Anaerobe Supplement (SR0107) rehydrated as directed, together with 25ml of defibrinated blood (SR0050/SR0051). Mix gently and pour into sterile Petri dishes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared plates of medium at 2-8°C away from light.
Reinforced Clostridial Agar 500g
RM572.00Brand:
Thermo ScientificTM OxoidTM
Cultivate and enumerate anaerobes, especially Clostridium species, with Thermo Scientific™ Oxoid™ Reinforced Clostridial Agar (RC Agar) (Dehydrated). A solid, highly nutritious medium, it can be used as an enrichment medium to optimize the growth of clostridia and other anaerobes, lactobacilli, and many other species of bacteria.
Reinforced Clostridial Agar (RC Agar) (Dehydrated), Oxoid Composition
| Typical Formula* |
gm/litre |
| Yeast extract |
3.0 |
| `Lab-Lemco’ powder |
10.0 |
| Peptone |
10.0 |
| Glucose |
5.0 |
| Soluble starch |
1.0 |
| Sodium chloride |
5.0 |
| Sodium acetate |
3.0 |
| Cysteine hydrochloride |
0.5 |
| Agar |
15.0 |
| pH 6.8 ± 0.2 @ 25°C |
|
Reinforced Clostridial Agar (RC Agar) (Dehydrated), Oxoid Preparation:
Suspend 52.5g in 1 litre of distilled water. Bring to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
Precautions
Further identification tests must be carried out on organisms isolated from this medium.
Cfm5 Cefixime
RM0.00Brand:
Thermo ScientificTM OxoidTM
OCLA (ISO) Selective Supplement
RM0.00Brand:
Thermo ScientificTM OxoidTM
This product has been discontinued, please refer to SR0257E
Thermo Scientific™ Oxoid OCLA (ISO) Selective Supplement is a selective supplement for use with Chromogenic Listeria Agar (ISO).
OCLA (ISO) Selective Supplement, Oxoid Composition
| Typical Formula |
SR0226E |
per litre
|
| Nalidixic acid |
10.0mg |
20.0mg
|
| Polymyxin B |
38,350IU |
76,700IU
|
| Ceftazidime |
10.0mg |
20.0mg
|
| Amphotericin |
5.0mg |
10.0mg |
Modified ISO Preparation:
Suspend 34.5g of Chromogenic Listeria Agar (ISO) in 480ml of distilled water. Mix well and sterilize by autoclaving at 121°C for 15 minutes. Cool the medium to 46°C and add one vial of Chromogenic Listeria Selective Supplement (ISO), reconstituted as directed and one vial of Brilliance Listeria Differential Supplement. Mix well and pour into sterile Petri dishes.
ISO Preparation:
Suspend 34.5g of Chromogenic Listeria Agar (ISO) Base in 480ml of distilled water. Mix well and sterilise by autoclaving at 121ºC for 15 minutes. Cool the medium to around 50ºC, and add one vial of Chromogenic Listeria Selective Supplement (ISO), re-suspended as directed, and one vial of OCLA (ISO) Differential Supplement. Mix well and pour into sterile Petri dishes.
Storage conditions and Shelf life
The dehydrated medium should be stored at 10-30°C and used before the expiry date on the label.
Prepared medium may be stored for up to 2 weeks at 2-8°C.
Monarch PCR and DNA Cleanup Kit, NEB
Brand:
New England Biolabs
Quickly and easily purify high-quality DNA from PCR and other enzymatic reactions.
- Elute in as little as 6 μl.
- Prevent buffer retention and salt carry-over with optimized column design.
- Save time with fast, user-friendly protocols.
- No need to monitor pH.
- Protocol modification allows for ssDNA purification, oligonucleotide purification, and purification of other small DNA fragments.
- Buffers and columns available separately.
- Significantly less plastic used when compared with other kits.
- Responsibly-sourced and recyclable packaging.
CDMN Selective Supplement 1 x 10 Vials
RM1,070.00Brand:
Thermo ScientificTM OxoidTM
Oxoid CDMN Supplement is used for the growth of Clostridium difficile.
- Add to to C. Difficile Agar Base, Part No. CM0601B
- Each vial for 2L medium
CDMN Selective Supplement, Oxoid Composition
| Vial contents: (each vial is sufficient for 500ml of medium) |
per vial |
per litre
|
| Cysteine hydrochloride |
250.0mg |
500.0mg |
| Norfloxacin |
6.0mg |
12.0mg |
| Moxalactam |
16.0mg |
32.0mg |
CDMN Agar, Oxoid Preparation:
Aseptically add 2ml of sterile distilled water to one vial of supplement and mix gently to dissolve completely. Aseptically add the contents to 500ml of sterile Clostridium difficile Agar Base CM0601 cooled to approximately 50°C together with 7% (v/v) of Defibrinated Horse Blood SR0050. Mix well and pour the resulting CDMN Agar into sterile Petri dishes.
Petroleum ether 40°C-60°C AR, 2.5L
RM87.00Brand:
Chemiz
Description
Formula: C6H14
Analytical grade petroleum ether for laboratory uses as solvent and extraction solvent.
Note:
AR: Analitycal Reagent Grade: Reagents for analytical purpose or research work that need high purity.
CP: Chemically Pure Grade: Reagents for regular practical in its original purity.
Mez75 Mezlocillin
RM0.00Brand:
Thermo ScientificTM OxoidTM
Barium titanate(IV), nanopowder (cubic), 50 nm (SEM), 99.9% trace metals basis – Sigma-Aldrich
RM1,979.00Brand:
Sigma-Aldrich
Synonyms
BaTiO3 nanoparticles, Barium titanium oxide, Barium titanium trioxide, Titanium barium oxide
Cas No.
12047-27-7
General description
This barium titanate(IV) nanopowder is a very fine white powder made of barium titanate nanoparticles with an average particle size of 50 nm. The synthesis is controlled so that the material crystallizes in the cubic polymorph, which is centrosymmetric with no spontaneous dipole.
Application
Barium Titanate is an effective lead free piezoelectric material and has been studied as a component of polymer nanocomposites and as a probe for cell imaging.
Tannic acid, ACS reagent (Sigma-Aldrich)
RM246.00Brand:
Sigma-Aldrich
Description:
CAS number: 1401-55-4
Chemical Formula: C76H52O46
Molar Mass: 1701.20 g/mol
Synonyms: Gallotannin, Tannin
General description
Tannic acid (TA) is a natural, non-toxic organic acid with corrosion inhibitive property for metals and alloys. A chemiluminescence (CL) system of KIO4 (potassium periodate)–H2O2 (hydrogen peroxide)–Tween40 has been employed in the detection of tannic acid in industrial wastewater. Tannic acid hydrolyzes to form mainly glucose and gallic acid. Its astringent property is due to the presence of polyphenolic groups.
Application
Tannic acid may be used in the following processes:
• Synthesis of ferric tannate complexes by reacting with metallic iron.
• As a protein deproteinizing agent in genomic and plasmid DNAs preparation.
• As a reductant in the synthesis of metal nanoparticles.
Silicon, nanoparticles, 40 nm avg. part. size, ≥99% trace metals basis – Sigma-Aldrich
RM2,072.00Brand:
Sigma-Aldrich
Synonyms
SiNPs, Silicon nanopowder
Cas no.
7440-21-3
General Description
Our 40 nm silicon nanoparticles are a high-quality, ultrafine powder with a narrow particle size of 40 nm and a high surface area (~100 m2/g). It is produced by the laser gas phase synthetic method from high-purity silane to achieve the high purity (>9=9%) and reliable particle size.
We are committed to bringing you Greener Alternative Products, which belongs to one of the four categories of greener alternatives. This product has been enhanced for energy efficency. Click here for more information.
Application
Silicon nanopowder is a promising material for use in advanced battery technologies. With its high theoretical capacity (4212 mAh/g), it has the potential to significantly improve the performance of lithium-ion batteries. The controlled particle size and high surface area of our silicon nanopowder make it an ideal candidate for use as an anode material in these batteries, allowing for improved charge and discharge rates, longer cycle life, and higher energy densities. Additionally, silicon nanopowder is being researched for use in other types of batteries, including lithium-air and lithium-sulfur batteries. Its unique properties make it a valuable material for developing next-generation battery technologies that offer higher performance, longer lifetimes, and lower costs.
Features and Benefits
Our silicon nanoparticles are designed for battery applications to extend cycle life and charge and discharge rates. We offer:
- Low Particle Size
- High Surface Area
- Consistent Quality
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM152.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
Price range: RM395.00 through RM627.00Brand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
OEM SeaKem® LE Agarose
RM1,514.00Brand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
Applications
Content & Storage
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Brand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available
FEATURED PRODUCTS
DNase I (RNase-free)
Brand:
New England Biolabs
- Endonuclease that nonspecifically cleaves DNA to release di-, tri- and oligonucleotide products with 5′-phosphorylated and 3′-hydroxylated ends
- Degrades DNA template in transcription reactions
- Removes contaminating genomic DNA from RNA samples
- Isolated from a recombinant source
Non fullerene acceptor Y6 – Sigma-Aldrich
RM1,928.00Brand:
Sigma-Aldrich
Synonyms
BTP-4F, Y6, PCE 157
CAS No
2304444-49-1
General Description
Non-fullerene acceptors (NFAs) are currently a major focus of research in the development of bulk-heterojunction organic solar cells (OSCs). In contrast to the widely used fullerene acceptors (FAs), the optical properties and electronic energy levels of NFAs can be designed and readily tuned. NFA-based OSCs can also achieve greater thermal stability and photochemical stability, as well as longer device lifetimes, than their FA-based counterparts.Recent developments have led to a rapid increase in power conversion efficiencies for NFA OSCs, with values now exceeding 15% in a single junction cell, and >17% for a tandem cell, demonstrating the viability of using NFAs to replace FAs in next-generation high-performance OSCs.
Y6 is a non-fullerene acceptor-donor-acceptor (A-D-A) type small molecular acceptor (SMA) with flexible alkyl chains and a centrally fused ring. It has a ladder-type electron-deficient core, which can be blended with PM6 for organic photovoltaic applications.
Applications
Y6 is a non-fullerene acceptor (NFA) that uses an electron-deficient molecular core to obtain a low band gap with improved electron affinity. OPV devices made from Y6 can reach exceptionally high performances in single-junction devices, with a maximum PCE reported of 15.7% (14.9% certified by Enli Tech Laboratory) when paired with PM6. Y6 is versatile and can be employed in both conventional and inverted OPV device architectures and can maintain a high PCE with varying active layer thicknesses (13.6% in thick 300 nm layers).
Y6 is used as an electron acceptor material in organic solar cells. It has shown promising results in improving the power conversion efficiency of organic solar cells. Y6 and its derivatives are also used in material engineering studies to understand the relationships between molecular structure, morphology and device performance in organic photovoltaics.
Methylammonium Iodide, ≥99%, anhydrous – Sigma-Aldrich
RM2,000.00Brand:
Sigma-Aldrich
Synonyms
Methanamine, hydriodide
General Description
We are committed to bringing you Greener Alternative Products, which adhere to one or more of the 12 Principles of Greener Chemistry. This product has been enhanced for energy efficiency. Click here for more details.
Application
Methylammonium iodide (MAI) has been widely used in the development of perovskite solar cells. MAI is typically used as a precursor material in the fabrication of perovskite thin films. It acts as a source of methylammonium cations (CH3NH3+) and iodide anions (I-) that are necessary for the formation of the perovskite crystal structure.
Methylammonium iodide, an organic halide-based perovskite material, can be used in the fabrication of high-performance organic solar cells.
Organohalide-based perovskites have emerged as an important class of material for solar cell applications. Our perovskite precursors with extremely low water contents are useful for synthesising mixed cation or anion perovskites needed for the optimization of the band gap, carrier diffusion length and power conversion efficiency of perovskite-based solar cells.
| Lineaer Formula |
CH3NH2 • HI |
| CAS Number |
14965-49-2 |
| Molecular Weight |
158.97 |
| MDL number |
MFCD28100833 |
| UNSPSC Code |
12352302 |
| NACRES |
Na.23 |
| Greener alternative product characteristics |
Design for Energy Efficiency |
Sxt25 Sulfamethoxazole/Trimethoprim
RM77.00Brand:
Thermo ScientificTM OxoidTM
Imipenem 32 M.I.C.E. (50 Pack)
RM0.00Brand:
Thermo ScientificTM OxoidTM
**This product is not available at the moment.
Effortlessly establish accurate Minimum Inhibitory Concentration (MIC) values manually using Thermo Scientific™ Oxoid™ Imipenem M.I.C.Evaluator Strips (M.I.C.E.™).
Peptone Special 500g
RM617.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Peptone Special is a specifically prepared mixture of peptones designed to encourage growth of the most fastidious microorganisms.
Modified Anaerobic Jar
RM0.00Brand:
Thermo ScientificTM OxoidTM
This product has been discontinued. Please contact us for more information.
Agar Bacteriological (Agar No.1) 500g, Oxoid
RM484.00Brand:
Thermo ScientificTM OxoidTM
Agar Bacteriological (Agar No. 1, Oxoid) is a clear purified high gel strength bacteriological agar compatible with all culture media. This agar has low calcium (Ca) and magnesium (Mg) levels and has very high working gel strength (1.5% w/v).
Agar Bacteriological, Oxoid is compatible with all culture media. It can be formulated to either broth or agar of the same medium with very similar metal values. This characteristic is especially valuable in antimicrobial MIC studies where differences in mineral/metal content can profoundly influence the results. Due to the low mineral/metal content in Agar Bacteriological, Oxoid, it allows free diffusion of antimicrobial substances. As a result, it is a highly satisfactory agar for antimicrobial diffusion studies (disc diffusion susceptibility tests).
Bst 2.0 DNA Polymerase
Brand:
New England Biolabs
Bst 2.0 DNA Polymerase displays improved amplification speed, yield and salt tolerance
- Optimized for Loop-Mediated Isothermal DNA Amplification (LAMP)
- Improved amplification reaction properties compared to Bst DNA Polymerase
- Fast polymerization
- Flexible reaction conditions including a higher salt tolerance and thermostability, as compared to wild-type Bst DNA Polymerase, Large Fragment (NEB #M0275)
MYP Agar 500g
RM467.00Brand:
Thermo ScientificTM OxoidTM
Selectively enumerate Bacillus cereus in food samples with Thermo Scientific™ Oxoid™ MYP Agar (Dehydrated). The medium relies upon mannitol fermentation and phospholipase C production to differentiate Bacillus cereus from other members of the species.
Mannitol-negative Bacillus cereus form pink colored colonies due to the presence of Phenol Red Indicator. Egg yolk emulsion helps in the differentiation of phospholipase C producing colonies, which are surrounded by a zone of the white precipitate. Polymixin B Sulphate acts as the inhibitor to restrict the growth of Gram-negative bacteria.
MYP Agar, Oxoid Composition
| Typical Formula* |
gm/litre |
| Meat extract |
1.0 |
| Peptone |
10.0 |
| Mannitol |
10.0 |
| Sodium chloride |
10.0 |
| Phenol Red |
0.025 |
| Agar |
12.0 |
| pH 7.2 ± 0.2 @ 25°C |
MYP Agar, Oxoid Preparation:
Suspend 21.5g in 450ml distilled water and bring gently to the boil to dissolve. Sterilise by autoclaving at 121°C for 15 minutes.
Cool to approximately 49°C and aseptically add 50ml Egg Yolk Emulsion SR0047 and 1 vial of Polymyxin B Supplement SR0099, reconstituted as directed. Mix well and pour into sterile petri dishes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared plates at 2-8°C.
Tryptone Soya Agar 500g, Oxoid
RM291.00Brand:
Thermo ScientificTM OxoidTM
Tryptone Soya Agar, Oxoid (dehydrated) is suitable to grow a wide variety of microorganisms. It’s a general-purpose agar medium containing two peptones, which supports the growth of both aerobes and anaerobes, the latter being grown either in deep cultures or by incubation under anaerobic conditions. Tryptone Soya Agar is recommended as a reference medium when testing selective media to measure the degree of inhibition.
| Typical Formula |
gm/litre
|
| Pancreatic digest of casein |
15.0 |
| Enzymatic* digest of soya bean |
5.0 |
| Sodium chloride |
5.0 |
| Agar |
15.0 |
| pH 7.3 ± 0.2 @ 25°C |
*Contains papain
Preparation of Tryptone Soya Agar, Oxoid
First, you add 40g of tryptone soya agar to 1 litre of distilled water (purified as required). You can boil to dissolve the powder completely. After dissolved, you can sterilise the medium by autoclaving at 121°C for 15 minutes.
Storage Condition and Shelf Life of Tryptone Soya Agar, Oxoid
You can store the dehydrated tryptone soya agar at 10-30°C and use before the expiry date on the label or store the prepared plates of a medium at 2-8°C.
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM152.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
Price range: RM395.00 through RM627.00Brand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
OEM SeaKem® LE Agarose
RM1,514.00Brand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
Applications
Content & Storage
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Brand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available
PRODUCT CATEGORIES
OUR BRANDS
DISTRIBUTION PARTNERS
LabMal is the online distribution of life science and biotechnology products, including microbiology, molecular biology, cell biology, general lab equipment, plastic consumables, chemical, cleansing solution and protein. If you are interested in the products from our distribution partners that are not available in Labmal, please contact us at 03-8051 5106 or info@labmal.com.
