LabMal specialises in online distribution of life science products & services, lab consumables and general lab equipment.
FEATURED PRODUCTS
KAA Agar Base 500g
RM843.00Brand:
Thermo ScientificTM OxoidTM
- Oxoid Kanamycin Aesculin Azide Agar Base is a selective medium for the isolation of Enterococci in foodstuffs.
- Also available Kanamycin Sulphate Selective Supplement, Part No. SR0092E.
Kanamycin Aesculin Azide Agar Base, Oxoid Composition
| Typical Formula* |
gm/litre |
| Tryptone |
18.8 |
| Yeast extract |
5.0 |
| Sodium chloride |
5.0 |
| Sodium citrate |
1.0 |
| Aesculin |
1.0 |
| Ferric ammonium citrate |
0.5 |
| Sodium azide |
0.15 |
| Starch | 0.6 |
| Mix for Streptococci | 0.6 |
| Agar | 10.0 |
| Final pH 7.0 ± 0.2 @ 25°C |
Kanamycin Aesculin Azide Agar, Oxoid Preparation:
Suspend 21.3g in 500ml of distilled water. Add one vial of Kanamycin Supplement (SR0092) reconstituted as directed. Bring to the boil. Sterilise by autoclaving at 121°C for 15 minutes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared media at 2-8°C.
Precautions
Observe the hazard precautions regarding sodium azide when disposing of the medium.
There is no universal medium which will isolate all strains of enterococci.
Unless a presumptive count is acceptable all isolates should have their identity confirmed with further tests.
CCDA Selective Supplement 1 x 10 Vials
RM855.00Brand:
Thermo ScientificTM OxoidTM
Oxoid CCDA Selective Supplement is used for the isolation of Campylobacter spp., especially C. upsaliensis or Arcobacter.
- For the isolation of Arcobacter spp., add to Arcobacter Broth Base, Part No. CM0965B
- For the isolation of Campylobacter spp., especially C. upsaliensis, add to Campylobacter Blood-Free Selective Agar Base (CCDA Preston), Part No. CM0739B
CCDA Selective Supplement, Oxoid Composition
| Vial contents (each vial is sufficient for 500ml of medium) |
per vial
|
per litre
|
| Cefoperazone |
16mg |
32mg
|
| Amphotericin B |
5mg |
10mg
|
Campylobacter Blood-Free Selective Agar, Oxoid Preparation:
Suspend 22.75g of Campylobacter Blood-Free Selective Agar Base in 500ml of distilled water and bring to the boil to dissolve. Sterilise by autoclaving at 121°C for 15 minutes. Cool to 50°C. Aseptically add 1 vial of CCDA Selective Supplement SR0155 reconstituted as directed. Mix well and pour into sterile Petri dishes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the selective supplement in the dark at 2-8°C and use before the expiry date on the label.
The prepared medium may be stored for up to 2 weeks at 2-8°C .
Brilliance™ UTI 500g
RM0.00Brand:
Thermo ScientificTM OxoidTM
Thermo Scientific™ Oxoid Brilliance™ UTI Agar (formerly Chomogenic UTI Agar ) is a chromogenic medium for the presumptive identification and differentiation of all the main micro-organisms that cause urinary tract infections (UTIs).
Brilliance UTI Agar, Oxoid Composition
| Typical Formula* |
gm/litre |
| Peptone |
15.0 |
| Chromogenic mix |
26.3 |
| Agar |
15.0 |
| Final pH 6.8 ± 0.2 @ 25°C |
Brilliance UTI Agar, Oxoid Preparation:
Suspend 56.3g of Brilliance UTI Agar in 1 litre of distilled water, mix well and sterilise by autoclaving at 121°C for 15 minutes. Cool to 50°C and mix well before pouring plates.
Storage conditions and Shelf life
Dehydrated Brilliance UTI Agar must be stored tightly capped in the original container at 10-30ºC.
Oxoid Brilliance UTI Agar plates should be stored in the original packaging, at the temperature stated on the pack or product specification, and protected from direct light.
When stored as directed, the unopened product will remain stable until the expiry date on the label. Locally prepared media can be stored for up to 2 weeks when made from CM0949 according to the manufacturer’s instructions and stored at 2-8ºC, in the dark. A longer shelf life may be attainable, but should be validated under the relevant, local manufacturing and storage conditions.
Buffered oxide etchant (BOE) 10:1 – Sigma-Aldrich
RM660.00Brand:
Sigma-Aldrich
Synonyms
BHF, Buffered HF
Cas No.
–
General Descriptions
Buffered oxide etchant (BOE) is a wet etchant used in microfabrication. Its primary use is in etching thin films of silicon dioxide (SiO2) or silicon nitride (Si3N4). It is a mixture of a buffering agent, such as ammonium fluoride (NH4F), and hydrofluoric acid (HF). Concentrated HF etches silicon dioxide too quickly for good process control and also peels the photoresist used in lithographic patterning.
Application
Buffered oxide etchant (BOE) 10:1 can be used in the etching of titanium carbide, which can be used in microelectromechanical systems (MEMS). It can also be used in the etching of spin-on-dopant (SOD) for the development of conductor-insulator-conductor tunnelling diodes. It can also be used to enhance the surface of fused quartz devices.
Clostridium Difficile Selective Supplement 1 x 10 Vials
RM1,673.00Brand:
Thermo ScientificTM OxoidTM
- Oxoid Clostridium Difficile Selective Supplement is added to Clostridium Difficile Agar Base, Part No. CM0601B.
- Each vial supplements 500mL of medium.
Clostridium Difficile Selective Supplement, Oxoid Composition
| Vial contents (each vial is sufficient for 500mls of medium) |
per vial
|
per litre
|
| D-cycloserine |
125.0mg
|
250.0mg |
| Cefoxitin |
4.0mg
|
8.0mg |
Clostridium Difficile Agar, Oxoid Preparation:
Suspend 34.5g in 500ml of distilled water and bring gently to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes. Allow to cool to 50°C and add aseptically the contents of 1 vial of Oxoid Clostridium Difficile Supplement (SR0096) reconstituted as directed, together with 7% (v/v) Defibrinated Horse Blood (SR0050). Sheep Blood (SR0051) may be used in place of Horse Blood but some strains of the organism will show a slightly reduced growth recovery. Mix well and pour into sterile Petri dishes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C no longer than 5-7 days.
Tinsdale Medium 500g
RM0.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Tinsdale Agar Base is used for the isolation and identification of Corynebacterium diphtheriae.
Tinsdale Agar Base, Oxoid Composition
| Typical Formula* |
gm/litre
|
| Proteose peptone |
20.0 |
| Yeast extract |
5.0 |
| Sodium chloride |
5.0 |
| L-cystine |
0.24 |
| Agar |
15.0
|
| pH 7.9 ± 0.2 @ 25°C |
Tinsdale Agar, Oxoid Preparation:
Suspend 9g of agar base in 200ml of distilled water. Bring to the boil and dissolve completely. DO NOT AUTOCLAVE. Allow to cool to approximately 50°C and add the contents of one vial of Oxoid Tinsdale Supplement SR0065 reconstiuted as directed. Mix throughly and pour into sterile Petri dishes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C for not more than 4 days.
Precautions
Further tests must be carried out on colonies suspected as Corynebacterium diphtheriae, including cell morphology after sub-culture to Loeffler’s Medium and examination for toxin production.
Do not incubate Tinsdale’s Agar plates in enhanced CO2 atmosphere (5-10% v/v).
N,N-Dimethylacetamide, ReagentPlus®, 99% (Sigma-Aldrich)
RM843.00Brand:
Sigma-Aldrich
General Description
CAS number: 127-19-5
Chemical Formula: CH3CON(CH3)2
Molar Mass: 87.12 g/mol
50 bp DNA Ladder, NEB
Brand:
New England Biolabs
This product is available in our Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
- Size range: 50 bp – 1350 bp
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025)
- Easy-to-identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
PEDOT:PSS, high-conductivity grade, 3.0-4.0% aqueous dispersion – Sigma-Aldrich
Price range: RM297.00 through RM1,187.00Brand:
Sigma-Aldrich
Synonyms
PEDOT:PSS, Poly(2,3-dihydrothieno-1,4-dioxin)-poly(styrenesulfonate)
CAS No
–
General Description
Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) is an organic semiconductor prepared by doping cationic poly(3,4-ethylenedioxythiophene) and poly(4-styrenesulfonate) anion. Its high electrical conductivity and good oxidation resistance make it suitable for electromagnetic shielding and noise suppression. PEDOT:PSS based polymeric films have a high transparency throughout the visible light spectrum and even in near IR and near UV regions, with virtually 100% absorption from 900-2000 nm. PEDOT provides the conduction properties and PSS forms a hydrated colloidal solution.
We are committed to bringing you Greener Alternative Products, which adhere to one or more of the 12 Principles of Green Chemistry. This product is used in energy conversion and storage, thus has been enhanced for energy efficiency. Click here for more information.
Applications
Electrical conductivity measurements herewith reported were on a film deposited by spin-coating on a clean glass, then dried (130 °C for 15 minutes on a hotplate). The layer thickness was determined by scratching the layer and measuring the profile/height of the scratch by a stylus profilometer. Electrodes for the measurement were by evaporating metal contacts (four-point probes).
PEDOT:PSS is an intrinsically conductive polymer (ICP) that can be coated on various substrates and nanostructures like fullerenes (C60) to form composites with high electrochemical properties for applications like low-cost printed electronics, optoelectronics, and polymeric solar cells. It can be used as a conductive hydrogel with polyethylene glycol-diacrylate (PEG-DA) for potential applications in tissue engineering. PEDOT:PSS also finds use in other organic electronic applications like organic thin film transistors (OTFTs) and dye sensitized solar cells (DSSCs).
Ready-to-use high conductivity coating formulation.
Virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend.
Packaging
Packaged in poly bottles
E10 Erythromycin
RM0.00Brand:
Thermo ScientificTM OxoidTM
Gentamycin 1024 M.I.C.E. (10 Pack)
RM0.00Brand:
Thermo ScientificTM OxoidTM
**This product is not available at the moment.
Effortlessly establish accurate Minimum Inhibitory Concentration (MIC) values manually using Thermo Scientific™ Oxoid™ Gentamycin M.I.C.Evaluator Strips (M.I.C.E.™).
Tryptone Soya Broth (acc. to EP/USP)
RM336.00Brand:
Thermo ScientificTM OxoidTM
Thermo Scientific™ Oxoid Tryptone Soya Broth is tested according to EP/USP.
Tryptone Soya Broth, Oxoid Composition
| Formula |
gm/litre |
| Pancreatic digest of casein |
17.0 |
| Enzymatic digest of soya bean* |
3.0 |
| Sodium chloride |
5.0 |
| Dipotassium hydrogen phosphate |
2.5 |
| Glucose |
2.5 |
| pH 7.3 ± 0.2 @ 25°C |
*Contains papain
Tryptone Soya Broth, Oxoid Preparation:
Add 30g to 1 litre of water (purified as required), mix well and distribute into final containers. Sterilise by autoclaving at 121°C for 15 minutes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium away form the light at room temperature.
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM152.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
Price range: RM395.00 through RM627.00Brand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
OEM SeaKem® LE Agarose
RM1,514.00Brand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
Applications
Content & Storage
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Brand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available
FEATURED PRODUCTS
C50 Chloramphenicol
RM0.00Brand:
Thermo ScientificTM OxoidTM
Ceftazidime 256 M.I.C.E. (50 pack)
RM0.00Brand:
Thermo ScientificTM OxoidTM
**This product is not available at the moment.
Effortlessly establish accurate Minimum Inhibitory Concentration (MIC) values manually using Thermo Scientific™ Oxoid™ Ceftazidime M.I.C.Evaluator Strips (M.I.C.E.™).
Histopaque®-1077 (Sigma-Aldrich)
RM359.00Brand:
Sigma-Aldrich
General description
Histopaque-1077 is a sterile, endotoxin tested solution of polysucrose and sodium diatrizoate, adjusted to a density of 1.077g/mL. This ready-to-use medium facilitates rapid recovery of viable lymphocytes and other mononuclear cells from small volumes of whole blood.
Application
Haematology: suitable
Histology: suitable
Histopaque-1077 has been used for-
• the isolation of peripheral blood mononuclear cells (PBMCs) and bone marrow mononuclear cells (BMMCs)
• purification of mononuclear cells through centrifugation
• isolation of human lymphocytes
• isolation of breast cancer circulating tumour cells (CTCs) from whole blood
TIL15 Tilmicosin 15µG
RM84.00Brand:
Thermo ScientificTM OxoidTM
Manually determine the antibiotic susceptibility of microorganisms using Antimicrobial Susceptibility Testing (AST) methods in conjunction with reliable, easy-to-use Thermo Scientific™ Oxoid™ Tilmicosin Antimicrobial Susceptibility Disks.
Salmonella Selective Supplement
RM486.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Salmonella Selective Supplement is used for the presumptive identification of Salmonella species from clinical and food samples.
- Add to Chromogenic Salmonella Agar Base, Part No. CM1007B or Brilliance™ Salmonella Agar Base, Part No. CM1092B
- Each vial supplements 500mL of medium
Salmonella Selective Supplement, Oxoid Composition
| Vial Contents (each vial is sufficient for 500ml of medium) | per vial | per litre |
| Novobiocin |
2.5mg |
5mg |
| Cefsulodin |
6mg |
12mg |
Chromogenic Salmonella Agar, Oxoid Preparation:
Suspend 25g in 500ml of distilled water and add the contents of one vial of Salmonella Selective Supplement (SR0194) reconstituted as directed. Mix well and bring to the boil with frequent agitation. DO NOT AUTOCLAVE. DO NOT HOLD AT BOILING TEMPERATURE. Cool to 50°C, mix well and pour into sterile Petri dishes.
Brilliance Salmonella Agar, Oxoid Preparation:
Suspend 27g of Brilliance Salmonella Agar Base in 500ml of distilled water. Add the contents of 1 vial of Salmonella Selective Supplement, resuspended as directed. Mix well and sterilise by bringing to the boil with frequent agitation. Cool to around 50ºC, mix well and pour into sterile Petri dishes.
NOTE: It is critical that the selective supplement is added prior to heating. When preparing volumes greater than 1 litre contact Oxoid Technical Support for directions.
Storage conditions and Shelf life
Salmonella Selective Supplement should be stored in the dark at 2-8ºC. When stored as directed, the un-opened products will remain stable until the expiry date printed on the packaging.
Semi Dry Blotter – 10 x 10cm
Brand:
Cleaver Scientific
These Semi Dry Blotters offer rapid transfer times for DNA, RNA and protein blotting typically 15 to 30 minutes. All units can be used for all types of blotting: Western, Southern and Northern via uncomplicated buffer and set up procedures and are compatible with gel thicknesses from 0.25 up to 10mm without the need for additional equipment. Each unit is compatible with their respective omniPAGE vertical gel system.
Brilliance Cronobacter Sakazakii Agar (DFI) 500g
RM3,303.00Brand:
Thermo ScientificTM OxoidTM
Differentiate and enumerate Cronobacter sakazakii from infant formula and other food samples with Thermo Scientific™ Brilliance™ Cronobacter Sakazakii Agar (Dehydrated). A chromogenic substrate present in the medium detects a-glucosidase reaction in Cronobacter sakazakii. The enzyme a-glucosidase, present in Cronobacter sakazakii, hydrolyses the substrate producing blue-green colonies on this pale yellow medium.
Brilliance Cronobacter Sakazakii Agar, Oxoid Composition
| Typical Formula * |
gm/litre |
| Tryptone |
15.0
|
| Soya peptone |
5.0
|
| Sodium chloride |
5.0
|
| Ferric ammonium citrate |
1.0
|
| Sodium desoxycholate |
1.0
|
| Sodium thiosulphate |
1.0
|
| Chromogen |
0.1
|
| Agar |
15.0 |
| Final pH 7.3 ± 0.2 @ 25°C |
Brilliance Cronobacter Sakazakii Agar, Oxoid Preparation:
Suspend 43.1g of Brilliance Cronobacter sakazakii Agar in 1 litre of distilled water. Mix well and bring to the boil to dissolve completely. Sterilize by autoclaving at 121°C for 15 minutes. Cool the medium to 50°C. Mix well and pour into sterile Petri dishes.
Storage conditions and Shelf life
The dehydrated medium should be stored at 10-30°C and used before the expiry date on the label.
Prepared medium may be stored for up to 2 weeks at 2-8°C.
DMEM with High Glucose with Glutamine without Sodium Pyruvate 500ml
RM415.00Brand:
Lonza
Product Overview
DMEM is a modification of Basal Medium Eagle (BME) that contains four-times the concentrations of the amino acids and vitamins.
The formulation first contained 1000 mg/L of glucose and was used to culture embryonic mouse cells. DMEM media is suitable for most types of cells, including human, monkey, hamster, rat, mouse, chicken and fish cells.The high glucose version is well suited to high density suspension culture.
Content
Water Standard 0.1%, Certified Reference Material (Merck)
RM659.00Brand:
Merck
CAS no.: 1589-47-5, 107-98-2
Traceability: Certified Reference Material for Karl Fischer Titration 1 g ≙ 1 mg H₂O Aquastar®
Synonym: –
Quality level: MQ300
Product specification and SDS for Water Standard 0.1%.
MRS Agar 500g, Oxoid
RM415.00Brand:
Thermo ScientificTM OxoidTM
Oxoid MRS Agar (de Man, Rogosa, Sharpe) (Dehydrated) is used for the growth of Lactobacilli.
Composition of MRS Agar, Oxoid
| Typical Formula * |
gm/litre
|
| Peptone |
10.0 |
| `Lab-Lemco’ powder |
8.0 |
| Yeast Extract |
4.0 |
| Glucose |
20.0 |
| Sorbitan mono-oleate |
1ml |
| Dipotassium hydrogen phosphate |
2.0 |
| Sodium acetate 3H2O |
5.0 |
| Triammonium citrate |
2.0 |
| Magnesium sulphate 7H2O |
0.2 |
| Manganese sulphate 4H2O |
0.05 |
| Agar |
10.0 |
| pH 6.2 ± 0.2 @ 25°C |
Preparation of MRS Agar, Oxoid
Suspend 62g of your MRS Agar in 1 litre of distilled water. You can boil to dissolve the powder completely. After a dissolve, you can sterilise the medium by autoclaving at 121°C for 15 minutes.
Storage Conditions and Shelf Life of MRS Agar, Oxoid
You can store your dehydrated MRS Agar at 10-30°C and use before the expiry date on the label. You can store the prepared plates at 2-8°C.
Modified Brucella Selective Supplement
RM669.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Modified Brucella Selective Supplement is for the cultivation and isolation of Brucella spp.
- Alternative supplement containing natamycin as a replacement for cycloheximide
- Add to Blood Agar Base No. 2, Part No. CM0271B or Brucella Medium Base, Part No. CM0169B
- Each vial supplements 500mL of medium
Modified Brucella Selective Supplement, Oxoid Composition
| Vial contents (each vial is sufficient for 500 ml of medium) | |
| Polymixin B |
2,500 IU |
| Bacitracin |
12,500 IU |
| Natamycin |
25.0 mg |
| Nalidixic acid |
2.5 mg |
| Nystatin |
50,000 IU |
| Vancomycin |
10.0 mg |
Modified Brucella Selective Medium Preparation:
Reconstitute one vial as directed, aseptically add the contents to 500 ml Brucella Medium Base, Columbia Agar Base or Blood Agar Base No.2 together with 5-10% v/v inactivated horse serum SR0035 and 1-5% w/v sterile solution of glucose, cooled to approximately 50°C. Mix well and pour into sterile Petri dishes.
DG 18 (Dichloran Glycerol Chloramphenicol) Agar (Base), Merck
RM1,477.00Brand:
Merck
Description
This DG 18 (Dichloran glycerol chloramphenicol) agar (base) is tested according to ISO 21527 and FDA-BAM GranuCult®. DG 18 Agar is suitable to enumerate and isolate xenophilic moulds from dried and semi-dried foods such as dried fruits, spices, confectionery, cereals, nuts, and dried meat and fish products.
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM152.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
Price range: RM395.00 through RM627.00Brand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
OEM SeaKem® LE Agarose
RM1,514.00Brand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
Applications
Content & Storage
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Brand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available
PRODUCT CATEGORIES
OUR BRANDS
DISTRIBUTION PARTNERS
LabMal is the online distribution of life science and biotechnology products, including microbiology, molecular biology, cell biology, general lab equipment, plastic consumables, chemical, cleansing solution and protein. If you are interested in the products from our distribution partners that are not available in Labmal, please contact us at 03-8051 5106 or info@labmal.com.
