LabMal specialises in online distribution of life science products & services, lab consumables and general lab equipment.
FEATURED PRODUCTS
Sodium Carbonate Anhydrous, AR, 1kg
RM23.00Brand:
Chemiz
Description
Synonyms: Calcined soda, Carbonic acid disodium salt, Soda ash, Sodium carbonate
Formula: Na2CO3
Sodium carbonate anhydrous is a water insoluble sodium source that is normally used in synthesis of other sodium compounds. Carbonate compounds also releases carbon dioxide when treated with diluted acid.
Note:
AR: Analitycal Reagent Grade: Reagents for analytical purpose or research work that need high purity.
CP: Chemically Pure Grade: Reagents for regular practical in its original purity.
Tinsdale Supplement 1 x 10 Vials
RM0.00Brand:
Thermo ScientificTM OxoidTM
This product has been discontinued. Please contact us for more information.
Oxoid Tinsdale Supplement is used for the cultivation of Corynebacterium diphtheriae.
- A supplement for Tinsdale Medium, Part No. CM0487B
- Each vial supplements 200mL of medium
Tinsdale Supplement, Oxoid Composition
| Vial contents (each vial is sufficient for 200 ml of medium) |
per vial
|
per litre
|
| Serum equiv. |
20.0ml |
100.0ml |
| Potassium tellurite |
0.069g |
0.3445g |
| Sodium thiosulphate |
0.085g |
0.425g |
Tinsdale Agar, Oxoid Preparation:
Suspend 9g of agar base in 200ml of distilled water. Bring to the boil and dissolve completely. DO NOT AUTOCLAVE. Allow to cool to approximately 50°C and add the contents of one vial of Oxoid Tinsdale Supplement SR0065 reconstiuted as directed. Mix throughly and pour into sterile Petri dishes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C for not more than 4 days.
Precautions
Further tests must be carried out on colonies suspected as Corynebacterium diphtheriae, including cell morphology after sub-culture to Loeffler’s Medium and examination for toxin production.
Do not incubate Tinsdale’s Agar plates in enhanced CO2 atmosphere (5-10% v/v).
P2 Penicillin G
RM0.00Brand:
Thermo ScientificTM OxoidTM
Cec30 Cefaclor
RM0.00Brand:
Thermo ScientificTM OxoidTM
Oxytetracyclin Glucose Yeast Extract 500g
RM256.00Brand:
Thermo ScientificTM OxoidTM
Selectively enumerate yeasts and molds from foodstuffs with Thermo Scientific™ Oxoid™ Oxytetracycline Glucose Yeast Extract Agar Base (Dehydrated). The medium is based upon the formulation described by Mossel et al. which utilizes oxytetracycline selectivity to provide increased counts of yeasts and molds compared to other media that utilize a low pH as a selective agent. Improve the recovery of physically stressed yeast cells on this neutral pH medium.
Oxytetracycline Glucose Yeast Extract Agar Base (Dehydrated), Oxoid Composition
| Typical Formula* |
gm/litre |
| Yeast extract |
5.0 |
| Glucose |
20.0 |
| Agar |
12.0 |
| pH 7.6 ± 0.2 @ 25°C |
Oxytetracycline Glucose Yeast Extract Agar, Oxoid Preparation:
Suspend 18.5g in 500ml of distilled water and bring gently to the boil to dissolve completely. Sterilise by autoclaving at 115°C for 10 minutes. Allow the medium to cool to 50°C and aseptically add the contents of one vial of Oxytetracycline GYE Selective Supplement (SR0073) reconstituted as directed. Mix thoroughly and pour into sterile Petri dishes. The pH of this medium should be 7.0±0.2 @ 25°C.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
Precautions:
The lactic-acid bacteria are inhibited on this medium.
Monarch Plasmid Miniprep Kit
Brand:
New England Biolabs
The Monarch Plasmid Miniprep Kit is a rapid and reliable method for the purification of up to 20 μg of high quality plasmid DNA.
- Elute in as little as 30 μl
- Prevent buffer retention and salt carry-over with optimized column design
- Reduce hands on time with faster protocols and less spin time
- Monitor completion of certain steps using colored buffer system
- No need to add RNase before starting
- Easily label columns using tab and frosted surfaces
- Buffers and columns available separately
- Significantly less plastic used when compared with other kits
- Responsibly-sourced and recyclable packaging
- No hazardous materials fees
Anti-phospho Histone H2A.X (Ser139), clone JBW301, Alexa Fluor® 488 Conjugate
RM2,808.00Brand:
Merck
Description
Histone H2A.X is a variant of histone H2A, and is similarly associated with genomic DNA. However, histone is structurally different from other members of the H2A family in possessing a C-terminal tail that contains the Ser139 residue that is phosphorylated in response to breaks in double-stranded DNA. The phosphorylation of H2A.X is a rapid process that is mediated by ATM/ATR proteins.
Desoxycholate Citrate Agar 500g
RM609.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Desoxycholate Citrate Agar is a differential medium for enumeration of coliforms and the isolation of enteric pathogens.
Desoxycholate Citrate Agar, Oxoid Composition
| Typical Formula* |
gm/litre |
| Lab-Lemco’ powder |
5.0 |
| Peptone |
5.0 |
| Lactose |
10.0 |
| Sodium citrate |
5.0 |
| Sodium thiosulphate |
5.0 |
| Ferric citrate |
1.0 |
| Sodium desoxycholate |
2.5 |
| Neutral red |
0.025 |
| Agar |
15.0 |
| pH 7.0 ± 0.2 |
Desoxycholate Citrate Agar, Oxoid Preparation:
Suspend 48.5g in 1 litre of distilled water. With frequent agitation bring to the boil over a gauze and flame to dissolve completely. Mix well and pour plates immediately. Dry the agar surface before use.
THIS MEDIUM IS HEAT SENSITIVE. AVOID EXCESSIVE OR PROLONGED HEATING DURING RECONSTITUTION. DO NOT AUTOCLAVE, OR REMELT.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared agar plates at 2-8°C.
Precautions
The medium is best used freshly prepared.
Stock cultures of Shigella species may become predominantly in the R-phase when subcultured away from DCA media. Such cultures are difficult to use for control purposes without first heavily streaking the cultures on DCA plates and picking off the few S-phase colonies i.e. the macro-colonies on the agar surface, for further subculture.
When making biochemical tests on colonies picked from the surface of DCA plates, purity subcultures should be carried out because the colony may be contaminated with Escherichia coli present as micro-colonies.
R.P.F. Supplement, Oxoid
RM3,915.00Brand:
Thermo ScientificTM OxoidTM
Oxoid RPF Supplement (Rabbit Plasma Fibrinogen) is used for the isolation and enumeration of coagulase positive staphylococci from food.
- Use only with Baird-Parker Agar Base, RPF, Part No. CM0961B
- Each vial supplements 100mL of medium
RPF Supplement (Rabbit Plasma Fibrinogen), Oxoid Composition
| Vial contents (each vial is sufficient for 100ml of medium) | |
| Fibrinogen |
0.375 g |
| Rabbit plasma |
2.5 ml |
| Trypsin inhibitor |
2.5 mg |
| Potassium tellurite |
2.5 mg |
RPF Supplement Medium Preparation:
Reconstitute one vial as directed, aseptically add the contents to 90 ml of sterile Baird-Parker Agar Base (RPF) CM0961 cooled to 48°C. Mix well and use immediately.
Precautions
Colonies of some contaminating organisms growing in close proximity to the coagulase positive colonies may partially digest the coagulase halo reaction.
Ipm10 Imipenem
RM80.00Brand:
Thermo ScientificTM OxoidTM
Lithium nickel manganese cobalt oxide, lithium-niobate coated NMC622 cathode active material – Sigma-Aldrich
RM1,060.00Brand:
Sigma-Aldrich
Synonyms
LiNbO3-coated NMC622, NMC622
General Description
Lithium niobate coated NMC622 is a powdered form of lithium nickel manganese cobalt oxide with a stoichiometry of 6:2:2 Ni:Mn:Co and a typical particle size of 4-10 microns. The particles are coated in 5-10 nm amorphous lithium niobate, less than 1 wt.%.
Applications
LiNbO3-coated NMC622 is a high-performance cathode active material specially designed for lithium-ion batteries (LIBs), particularly solid-state and high-voltage batteries. With a balance of 60% nickel for high capacity and 40% manganese and cobalt for structural stability, NMC622 surpasses NMC811 in terms of cycling lifetime and coulombic efficiencies and offers higher capacity than NMC532. The LiNbO3 coating plays a vital role in enhancing the stability of the cathode material by safeguarding the electrode and electrolyte from undesired reactions. Research suggests that this lithium-niobate coating mitigates reactions between the cathode material and electrolyte, reducing capacity fade over time and impeding the release of metal ions from the NMC cathode. Additionally, the LiNbO3 “insertion layer” improves rate capability by minimizing the space charge layer barrier at the electrolyte/cathode interface. This advancement translates to superior Li diffusion and reduced electrode polarization.
Features & Benefits
- NMC622: High capacity and long cycle lifetimes
- LiNbO3 coating: Enhanced protection for cathode and electrolyte, leading to improved coulombic efficiency
- LiNbO3 insertion layer: Boosts rate capability
Sodium Hypochlorite 10% CP 2.5L
RM39.00Brand:
Chemiz
Description
Synonyms: Antiformin, Sodium oxychloride, Chlorox
Formula: NaOCl
Sodium hypochlorite is a pale yellowish liquid with chlorine odour that possesses bactericidal, sporicidal and fungicidal effect. Sodium hypochlorite is an irritant, it should be diluted accordingly to be used as bleaching agent.
Note:
AR: Analitycal Reagent Grade: Reagents for analytical purpose or research work that need high purity.
CP: Chemically Pure Grade: Reagents for regular practical in its original purity.
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM152.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
Price range: RM395.00 through RM627.00Brand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
OEM SeaKem® LE Agarose
RM1,514.00Brand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
Applications
Content & Storage
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Brand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available
FEATURED PRODUCTS
DNase I (RNase-free)
Brand:
New England Biolabs
- Endonuclease that nonspecifically cleaves DNA to release di-, tri- and oligonucleotide products with 5′-phosphorylated and 3′-hydroxylated ends
- Degrades DNA template in transcription reactions
- Removes contaminating genomic DNA from RNA samples
- Isolated from a recombinant source
Non fullerene acceptor Y6 – Sigma-Aldrich
RM1,928.00Brand:
Sigma-Aldrich
Synonyms
BTP-4F, Y6, PCE 157
CAS No
2304444-49-1
General Description
Non-fullerene acceptors (NFAs) are currently a major focus of research in the development of bulk-heterojunction organic solar cells (OSCs). In contrast to the widely used fullerene acceptors (FAs), the optical properties and electronic energy levels of NFAs can be designed and readily tuned. NFA-based OSCs can also achieve greater thermal stability and photochemical stability, as well as longer device lifetimes, than their FA-based counterparts.Recent developments have led to a rapid increase in power conversion efficiencies for NFA OSCs, with values now exceeding 15% in a single junction cell, and >17% for a tandem cell, demonstrating the viability of using NFAs to replace FAs in next-generation high-performance OSCs.
Y6 is a non-fullerene acceptor-donor-acceptor (A-D-A) type small molecular acceptor (SMA) with flexible alkyl chains and a centrally fused ring. It has a ladder-type electron-deficient core, which can be blended with PM6 for organic photovoltaic applications.
Applications
Y6 is a non-fullerene acceptor (NFA) that uses an electron-deficient molecular core to obtain a low band gap with improved electron affinity. OPV devices made from Y6 can reach exceptionally high performances in single-junction devices, with a maximum PCE reported of 15.7% (14.9% certified by Enli Tech Laboratory) when paired with PM6. Y6 is versatile and can be employed in both conventional and inverted OPV device architectures and can maintain a high PCE with varying active layer thicknesses (13.6% in thick 300 nm layers).
Y6 is used as an electron acceptor material in organic solar cells. It has shown promising results in improving the power conversion efficiency of organic solar cells. Y6 and its derivatives are also used in material engineering studies to understand the relationships between molecular structure, morphology and device performance in organic photovoltaics.
Methylammonium Iodide, ≥99%, anhydrous – Sigma-Aldrich
RM2,000.00Brand:
Sigma-Aldrich
Synonyms
Methanamine, hydriodide
General Description
We are committed to bringing you Greener Alternative Products, which adhere to one or more of the 12 Principles of Greener Chemistry. This product has been enhanced for energy efficiency. Click here for more details.
Application
Methylammonium iodide (MAI) has been widely used in the development of perovskite solar cells. MAI is typically used as a precursor material in the fabrication of perovskite thin films. It acts as a source of methylammonium cations (CH3NH3+) and iodide anions (I-) that are necessary for the formation of the perovskite crystal structure.
Methylammonium iodide, an organic halide-based perovskite material, can be used in the fabrication of high-performance organic solar cells.
Organohalide-based perovskites have emerged as an important class of material for solar cell applications. Our perovskite precursors with extremely low water contents are useful for synthesising mixed cation or anion perovskites needed for the optimization of the band gap, carrier diffusion length and power conversion efficiency of perovskite-based solar cells.
| Lineaer Formula |
CH3NH2 • HI |
| CAS Number |
14965-49-2 |
| Molecular Weight |
158.97 |
| MDL number |
MFCD28100833 |
| UNSPSC Code |
12352302 |
| NACRES |
Na.23 |
| Greener alternative product characteristics |
Design for Energy Efficiency |
Sxt25 Sulfamethoxazole/Trimethoprim
RM77.00Brand:
Thermo ScientificTM OxoidTM
Imipenem 32 M.I.C.E. (50 Pack)
RM0.00Brand:
Thermo ScientificTM OxoidTM
**This product is not available at the moment.
Effortlessly establish accurate Minimum Inhibitory Concentration (MIC) values manually using Thermo Scientific™ Oxoid™ Imipenem M.I.C.Evaluator Strips (M.I.C.E.™).
Peptone Special 500g
RM617.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Peptone Special is a specifically prepared mixture of peptones designed to encourage growth of the most fastidious microorganisms.
Modified Anaerobic Jar
RM0.00Brand:
Thermo ScientificTM OxoidTM
This product has been discontinued. Please contact us for more information.
Agar Bacteriological (Agar No.1) 500g, Oxoid
RM484.00Brand:
Thermo ScientificTM OxoidTM
Agar Bacteriological (Agar No. 1, Oxoid) is a clear purified high gel strength bacteriological agar compatible with all culture media. This agar has low calcium (Ca) and magnesium (Mg) levels and has very high working gel strength (1.5% w/v).
Agar Bacteriological, Oxoid is compatible with all culture media. It can be formulated to either broth or agar of the same medium with very similar metal values. This characteristic is especially valuable in antimicrobial MIC studies where differences in mineral/metal content can profoundly influence the results. Due to the low mineral/metal content in Agar Bacteriological, Oxoid, it allows free diffusion of antimicrobial substances. As a result, it is a highly satisfactory agar for antimicrobial diffusion studies (disc diffusion susceptibility tests).
Bst 2.0 DNA Polymerase
Brand:
New England Biolabs
Bst 2.0 DNA Polymerase displays improved amplification speed, yield and salt tolerance
- Optimized for Loop-Mediated Isothermal DNA Amplification (LAMP)
- Improved amplification reaction properties compared to Bst DNA Polymerase
- Fast polymerization
- Flexible reaction conditions including a higher salt tolerance and thermostability, as compared to wild-type Bst DNA Polymerase, Large Fragment (NEB #M0275)
MYP Agar 500g
RM467.00Brand:
Thermo ScientificTM OxoidTM
Selectively enumerate Bacillus cereus in food samples with Thermo Scientific™ Oxoid™ MYP Agar (Dehydrated). The medium relies upon mannitol fermentation and phospholipase C production to differentiate Bacillus cereus from other members of the species.
Mannitol-negative Bacillus cereus form pink colored colonies due to the presence of Phenol Red Indicator. Egg yolk emulsion helps in the differentiation of phospholipase C producing colonies, which are surrounded by a zone of the white precipitate. Polymixin B Sulphate acts as the inhibitor to restrict the growth of Gram-negative bacteria.
MYP Agar, Oxoid Composition
| Typical Formula* |
gm/litre |
| Meat extract |
1.0 |
| Peptone |
10.0 |
| Mannitol |
10.0 |
| Sodium chloride |
10.0 |
| Phenol Red |
0.025 |
| Agar |
12.0 |
| pH 7.2 ± 0.2 @ 25°C |
MYP Agar, Oxoid Preparation:
Suspend 21.5g in 450ml distilled water and bring gently to the boil to dissolve. Sterilise by autoclaving at 121°C for 15 minutes.
Cool to approximately 49°C and aseptically add 50ml Egg Yolk Emulsion SR0047 and 1 vial of Polymyxin B Supplement SR0099, reconstituted as directed. Mix well and pour into sterile petri dishes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared plates at 2-8°C.
Tryptone Soya Agar 500g, Oxoid
RM291.00Brand:
Thermo ScientificTM OxoidTM
Tryptone Soya Agar, Oxoid (dehydrated) is suitable to grow a wide variety of microorganisms. It’s a general-purpose agar medium containing two peptones, which supports the growth of both aerobes and anaerobes, the latter being grown either in deep cultures or by incubation under anaerobic conditions. Tryptone Soya Agar is recommended as a reference medium when testing selective media to measure the degree of inhibition.
| Typical Formula |
gm/litre
|
| Pancreatic digest of casein |
15.0 |
| Enzymatic* digest of soya bean |
5.0 |
| Sodium chloride |
5.0 |
| Agar |
15.0 |
| pH 7.3 ± 0.2 @ 25°C |
*Contains papain
Preparation of Tryptone Soya Agar, Oxoid
First, you add 40g of tryptone soya agar to 1 litre of distilled water (purified as required). You can boil to dissolve the powder completely. After dissolved, you can sterilise the medium by autoclaving at 121°C for 15 minutes.
Storage Condition and Shelf Life of Tryptone Soya Agar, Oxoid
You can store the dehydrated tryptone soya agar at 10-30°C and use before the expiry date on the label or store the prepared plates of a medium at 2-8°C.
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM152.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
Price range: RM395.00 through RM627.00Brand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
OEM SeaKem® LE Agarose
RM1,514.00Brand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
Applications
Content & Storage
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Brand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available
PRODUCT CATEGORIES
OUR BRANDS
DISTRIBUTION PARTNERS
LabMal is the online distribution of life science and biotechnology products, including microbiology, molecular biology, cell biology, general lab equipment, plastic consumables, chemical, cleansing solution and protein. If you are interested in the products from our distribution partners that are not available in Labmal, please contact us at 03-8051 5106 or info@labmal.com.
