LabMal specialises in online distribution of life science products & services, lab consumables and general lab equipment.
FEATURED PRODUCTS
Latex Examination Glove (Powder Free)
RM13.00Brand:
Lattice
Powder-free latex examination glove is the most common disposable gloves that use in different application.
Features
- Protect from cross-contamination and dangerous substances
- Smooth donning thanks to single chlorination process even with a wet hand
- Soft and flexible to provide comfort
- Ambidextrous
- Fully textured to improve grip even in wet condition
- Beaded cuff makes donning easy
| Type | : | Powder Free |
| Material | : | High-quality natural rubber latex |
| Design & Features | : | Ambidextrous, textured, beaded cuff, off white to yellow |
| Shelf-life | : | 5 years from the date of manufacturing |
Quality Standards
- Conforms to ASTM D3578 & EN455 standards
- Manufactured under ISO13485:2003 quality management system
Histopaque®-1077 (Sigma-Aldrich)
RM376.00Brand:
Sigma-Aldrich
General description
Histopaque-1077 is a sterile, endotoxin tested solution of polysucrose and sodium diatrizoate, adjusted to a density of 1.077g/mL. This ready-to-use medium facilitates rapid recovery of viable lymphocytes and other mononuclear cells from small volumes of whole blood.
Application
Haematology: suitable
Histology: suitable
Histopaque-1077 has been used for-
• the isolation of peripheral blood mononuclear cells (PBMCs) and bone marrow mononuclear cells (BMMCs)
• purification of mononuclear cells through centrifugation
• isolation of human lymphocytes
• isolation of breast cancer circulating tumour cells (CTCs) from whole blood
MicroDOC System with UV Transilluminator
Brand:
Cleaver Scientific
The microDOC can be supplied with our various formats of transilluminators.
Urea CP, 500g
RM27.00Brand:
Chemiz
Description
Synonyms: Carbamide
Formula: NH2CONH2
Urea is a raw material used in the manufacture of many chemicals such as plastics and adhesives. It is highly soluble and has a pKa of almost 0.
Note:
AR: Analitycal Reagent Grade: Reagents for analytical purpose or research work that need high purity.
CP: Chemically Pure Grade: Reagents for regular practical in its original purity.
Pipette Stand/Rack
RM0.00Brand:
Biologix
This item is not available at the moment. Please contact us for more information.
Characteristics
Holds up to six single- or multi-channel pipettes.
One Broth-Salmonella Supplement 10x225ML
RM176.00Brand:
Thermo ScientificTM OxoidTM
Thermo Scientific™ Oxoid™ ONE Broth-Salmonella Supplement is for the selective enrichment of Salmonella spp. from food samples in 24 hours in a single enrichment step.
- Add to ONE Broth-Salmonella Part No. CM1091B
- Each vial supplements 500mL of medium
ONE Broth Salmonella Selective Supplement, Oxoid Composition
| Vial Contents (each vial is sufficient for 500ml of medium) |
per vial |
per litre |
| Novobiocin |
2.7mg |
12mg |
ONE Broth Salmonella Selective Medium Preparation:
Suspend 5.6g of ONE Broth-Salmonella Base in 225ml of distilled water. Sterilize by autoclaving at 121°C for 15 minutes. Cool to below 50°C and add the contents of 1 vial of ONE Broth-Salmonella Supplement (SR0242), resuspended as directed.
Storage conditions and Shelf life
The ONE Broth-Salmonella Selective Supplement should be stored in the dark at 2-8ºC. When stored as directed, the unopened products will remain stable until the expiry date printed on the packaging.
Once prepared, ONE Broth-Salmonella can be stored for up to 2 weeks when made from CM1091 and SR0242 according to the manufacturer’s instructions and stored at 2-8ºC, in the dark. A longer shelf life may be attainable, but should be validated under the relevant, local manufacturing and storage conditions.
Stuart Transport Medium (Modified) 500g
RM881.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Stuart Transport Medium is a semi-solid non-nutritional transport medium for fastidious, pathogenic organisms.
Stuart Transport Medium, Oxoid Composition
| Typical Formula* |
gm/litre |
| Sodium glycerophosphate |
10.0 |
| Sodium thioglycollate |
0.5 |
| Cysteine hydrochloride |
0.5 |
| Calcium chloride |
0.1 |
| Methylene blue |
0.001 |
| Agar |
5.0 |
| pH 7.4 ± 0.2 @ 25°C |
Stuart Transport Medium, Oxoid Preparation:
Suspend 16g in 1 litre of distilled water. Bring to the boil to dissolve completely and dispense into screw-capped 7ml bottles. Fill each bottle to the brim, tighten the cap and sterilise by autoclaving at 121°C for 15 minutes. When sufficiently cool to handle, mix by inversion.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 15-25°C.
Precautions
A small amount of blue colour at the top of the bottle indicates oxidation. If this colour extends down into the medium it should be discarded.
Avoid prolonged heating in open flasks, during the preparation of the medium, because thioglycollate is volatile.
Sodium glycerophosphate may be metabolised by some organisms and thus promote their growth.
Cyclohexane for liquid chromatography LiChrosolv®
RM828.00Brand:
Merck
Description
CAS number: 110-82-7
Chemical Formula: C₆H₁₂
Molar Mass: 84.16 g/mol
Synonyms: Hexahydrobenzene, Hexamethylene, Naphthene
With their high degree of UV transmittance, low particle count, low acidity and alkalinity and low evaporation residue level, LiChrosolv® solvents are ideal for reproducible separations. Since separations are normally carried out under gradient conditions in analytical HPLC, we offer solvents in “gradient grade” as well as “isocratic grade”. This enables to minimize the gradient effect of the solvent involved. Filtered by 0.2 µm filter
Tin(IV) oxide nanoparticle ink, 2.5 wt%, viscosity 3.5 cP – Sigma-Aldrich
Price range: RM817.00 through RM2,501.00Brand:
Sigma-Aldrich
Synonyms
Avantama N-31, Ink for charge selective layers in printed electronics, SnO2 ink, Tin oxide nanoparticle dispersion
Cas No.
–
Application
- This SnO2 nanoparticle ink is for charge selective layers in printed electronics.
- This SnO2 nanoparticle ink is for spin-coating, doctor blading, slot-die or inkjet printing.
Legal Information
Product of Avantama Ltd.
Disclaimer
- Storage: In dark at room temperature.
- Prior to application: Shake, and filter through 0.2 or 0.45 μm PP filter. Do not use PTFE filter.
- Ink can be diluted with butanol.
- Thickness optimization may be necessary.
- Drying of deposited SnO2 films at >100 °C.
Titanium dioxide, nanopowder, 21 nm primary particle size (TEM), ≥99.5% trace metals basis – Sigma-Aldrich
RM1,228.00Brand:
Sigma-Aldrich
Synonyms
Nanotitania, TiO₂ nanopowder, TiO2 nanopowder, Titanium(IV) oxide, Titania, Titanium dioxide
CAS No
13463-67-7
General Description
Our titanium(IV) oxide nanopowder is a fine white powder composed of titanium dioxide nanoparticles with an average particle size of 21 nm, resulting in a high surface area of 35-65 m2/g. Two main physico-chemically distinct polymorphs of TiO2 are anatase and rutile. Anatase has a higher photocatalytic activity than rutile but is thermodynamically less stable.
Application
TiO2 nanoparticles were used to study the photocatalytic hexane vapor degradation. It has been used as a sorbent for arsenic removal. TiO2 nanoparticles are suitable for remediation of antiseptic components in wastewater by photocatalysis. It has also been used to study adsorption of DNA oligonucleotides by titanium dioxide nanoparticles.
Streptomycin 300 (S300)
RM0.00Brand:
Thermo ScientificTM OxoidTM
Burkholderia Cepacia Selective Supplement
RM1,567.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Burkholderia Cepacia Selective Supplement is used for the isolation of Burkholderia cepacia.
- Add to Burkholderia Cepacia Agar Base, Part No. CM0995B
- Each vial supplements 500mL of medium
Burkholderia Cepacia Selective Supplement, Oxoid Composition
| Vial contents (each vial is sufficient for 500ml of medium) |
per vial
|
per litre
|
| Polymixin B |
75,000IU |
150,000IU |
| Gentamicin |
2.5mg |
5.0mg |
| Ticarcillin |
50.0mg |
100.0mg |
Burkholderia Cepacia Agar, Oxoid Preparation:
Suspend 18.25g of Burkholderia cepacia Agar Base in 500ml of distilled water, mix well and sterilise by autoclaving at 121°C for 15 minutes. Cool to 50°C and aseptically add the contents of one vial of Burkholderia cepacia Selective Supplement SR0189, reconstituted as directed. Mix well and distribute into sterile Petri dishes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared plates of medium at 2-8°C.
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM152.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
Price range: RM424.00 through RM673.00Brand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
OEM SeaKem® LE Agarose
RM1,514.00Brand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
Applications
Content & Storage
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Brand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available
FEATURED PRODUCTS
Oa2 Oxolinic Acid
RM0.00Brand:
Thermo ScientificTM OxoidTM
Yersinia Selective Supplement 1 x 10 Vials
RM410.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Yersinia Selective Supplement is used for the isolation of Yersinia enterocolitica.
- Add to Yersinia Selective Agar Base, Part No. CM0653B
- Each vial supplements 500mL of medium
Yersinia Selective Supplement, Oxoid Composition
| Vial contents (each vial is sufficient for 500 ml of medium) |
per vial
|
per litre
|
| Cefsulodin |
7.5mg |
15mg
|
| Irgasan |
2.0mg |
4.0mg
|
| Novobiocin |
1.25mg |
2.5mg
|
Yersinia Selective Agar, Oxoid Preparation:
Suspend 29g in 500ml of distilled water and bring gently to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes. Allow to cool to approximately 50°C and aseptically add the contents of one vial of Yersinia Selective Supplement SR0109 reconstituted as directed in the instructions for use that accompany the product. Mix gently and pour into sterile Petri dishes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C for not more than 24 hours.
Precautions
Some strains of Yersinia enterocolitica may grow poorly or not at all. Other species of Yersinia may grow along with some enteric organisms. It is therefore essential that full identification tests are carried out on suspect colonies.
PCR Marker
Brand:
New England Biolabs
- Size range: 50 bp to 766 bp
- Value pricing
- Supplied with free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 100 gel lanes; large size suitable for 500 gel lanes
Bile Salts No. 3 250g
RM840.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Bile Salts No. 3 is a specifically refined fraction of bile acid salts.
- Normal working concentration 0.15% w/v.
- Each vial supplements 500mL of medium.
Mem10 Meropenem
RM79.00Brand:
Thermo ScientificTM OxoidTM
Modified Listeria Selective Supplement (Oxford)
RM615.00Brand:
Thermo ScientificTM OxoidTM
- Oxoid Listeria Selective Supplement (Oxford) is used for the detection of Listeria monocytogenes.
- Add to Listeria Selective Agar Base, Part No. CM0856B.
Modified Listeria Selective Supplement (Oxford), Oxoid Composition
|
Vial contents (each vial is sufficient for 500ml of medium) |
per vial |
per litre
|
|
Amphotericin B
|
5.0mg
|
10.0mg
|
|
Colistin sulphate |
10.0mg |
20.0mg
|
|
Acriflavine |
2.5mg |
5.0mg
|
|
Cefotetan |
1.0mg |
2.0mg
|
|
Fosfomycin |
5.0mg |
10.0mg
|
Modified Listeria Selective Medium Preparation:
Reconstitute one vial as directed, aseptically add the contents to500 ml of sterilised Listeria Selective Agar Base (Oxford Formulation) CM0856, cooled to approximately 50°C. Mix well and pour into sterile Petri dishes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared plates at 2-8°C in the dark.
P1.5 Penicillin G
RM0.00Brand:
Thermo ScientificTM OxoidTM
Aluminum oxide, gamma phase, nanopowder, 5 nm avg. part. size, 99.95% trace metals basis- Sigma-Aldrich
RM1,709.00Brand:
Sigma-Aldrich
Synonyms
γ-Al2O3, Cubic aluminium oxide, Gamma-alumina, Gamma-aluminum(III) oxide, Alumina
Cas No.
1344-28-1
General description
Gamma-phase Al2O3 is one of the several crystalline phases of aluminum oxide, also known as alumina. It has a cubic crystal structure with a high degree of symmetry, characterized by a closely packed arrangement of oxygen and aluminum ions, and tends to be highly porous. Our aluminum oxide nanopowder in the gamma phase is a high-purity product with 99.95% purity and an average particle size of 5 nm. This nanopowder is characterized by its high surface area, excellent dielectric properties, and resistance to corrosion and wear. Our aluminum oxide nanopowder is produced using advanced manufacturing techniques, ensuring uniform particle size and high purity.
We are committed to bringing you Greener Alternative Products, which belongs to one of the four categories of greener alternatives. This product has been enhanced for energy efficency. Click here for more information.
Application
Our gamma phase alumina nanopowder is useful in a variety of applications. Its high purity and small particle size make it an excellent catalyst and catalyst-support for chemical reactions, including dehydration, isomerization, hydrogenation, oxidation, reforming, and Fischer-Tropsch synthesis. Because of its porosity, it has many uses in pharmaceutical and industrial manufacturing processes as an adsorbent and desiccating agent. In addition, gamma-phase Al2O3 is a widely used material in the field of electronics due to its high dielectric constant, low dielectric loss, and excellent electrical insulation properties. Its ability to store electrical charge, retain its properties over a wide range of frequencies, and withstand high voltages make it an ideal choice for use in a wide range of electronic components, including capacitors, insulators, transformers, and high-frequency and high-voltage applications. The nanopowder′s hardness and stability make it suitable for use in wear-resistant coatings, and its resistance to corrosion and oxidation makes it a reliable material for high-temperature environments.
Mycoplasma Supplement G 1 x 10 Vials
RM800.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Mycoplasma Supplement G is for the isolation of mycoplasmas.
- Add to Mycoplasma Pneumoniae Agar, Part No. CM0401B or CM0403B
- Each vial supplements 80mL of medium
Mycoplasma Supplement G, Oxoid Composition
POISON – CONTAINS THALLIUM SALT
| Vial contents (each vial is sufficient for 80ml of medium) |
per vial
|
per litre
|
| Horse serum |
20.0ml |
200.0ml |
| Yeast extract (25% w/v) |
10.0ml |
100.0ml |
| Thallous acetate |
25.0mg |
250.0mg |
| Penicillin |
20,000IU |
200,000IU |
Mycoplasma Medium Preparation:
Prepare the sterile supplement by aseptically adding 20ml sterile distilled water to the vial and mix gently. Add 1ml of Oxoid Mycoplasma Base without supplements to each of ten small bottles. Sterilise by autoclaving at 121°C for 15 minutes. Allow to set. Aseptically add 2ml of the reconstituted Supplement-P to each bottle containing agar.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
Crossley Milk Medium 500g
RM657.00Brand:
Thermo ScientificTM OxoidTM
A simple medium originally described by Crossley for the routine examination of canned food samples for anaerobic bacteria, this medium has evolved as the result of comparative trials carried out by Crossley with several standard media. It is capable of giving rapid growth without the use of special anaerobic apparatus, yet the bacteria detected may be provisionally identified by their reactions upon the medium.
Crossley milk medium, Oxoid Composition
| Typical Formula* |
gm/litre |
| Skim milk powder |
100.0 |
| Peptone |
10.0 |
| Bromocresol purple |
0.1 |
| pH 6.8 ± 0.2 @ 25°C |
Crossley milk medium, Oxoid Preparation:
Cream 110g of the powder with a little distilled water and gradually dilute to 1 litre with continuous mixing. Tube in 10ml quantities and autoclave at 121°C for 5 minutes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
OneTaq DNA Polymerase
Brand:
New England Biolabs
The ONE polymerase for your endpoint PCR needs. OneTaq DNA Polymerase is an optimized blend of Taq and Deep Vent® DNA polymerases for use with routine and difficult PCR experiments.
- 2X higher fidelity than Taq
- Ideal for routine, AT- or GC-rich templates
- Hot start and master mix versions available
Etp10 Ertapenem
RM80.00Brand:
Thermo ScientificTM OxoidTM
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM152.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
Price range: RM424.00 through RM673.00Brand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
OEM SeaKem® LE Agarose
RM1,514.00Brand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
Applications
Content & Storage
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Brand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available
PRODUCT CATEGORIES
OUR BRANDS
DISTRIBUTION PARTNERS
LabMal is the online distribution of life science and biotechnology products, including microbiology, molecular biology, cell biology, general lab equipment, plastic consumables, chemical, cleansing solution and protein. If you are interested in the products from our distribution partners that are not available in Labmal, please contact us at 03-8051 5106 or info@labmal.com.
