LabMal specialises in online distribution of life science products & services, lab consumables and general lab equipment.

Oxoid Bile Salts No. 3 is a specifically refined fraction of bile acid salts.

• Normal working concentration 0.15% w/v.
• Each vial supplements 500mL of medium.

Identify dermatophytes and other fungi and yeasts in clinical specimens and environmental samples with the acidic Thermo Scientific™ Oxoid™ Sabouraud Dextrose Agar. The low pH supports the growth of fungi while inhibiting bacterial growth in mixed samples. Fungi maintain their typical cultural appearance and, thus, may be readily identified according to standard macroscopic characters.

Directions
Add 65g of Sabouraud Dextrose Agar to 1L of distilled water. Sterilize the medium by autoclaving at 121°C for 15 mins. Mix well and pour into a clean petri dish.

Storage Conditions and Shelf Life
Store the medium at 10-30°C and use before the expiry date printed on the label. Store the prepared medium at 2-8°C.

An anaerobic enrichment broth for Staphylococcus aureus.

Giolitti-Cantoni Broth, Oxoid Composition

Giolitti-Cantoni Broth, Oxoid Preparation:
Suspend 54.2g in one litre of distilled water and heat gently to dissolve. Dispense 19ml amounts into 20 x 200mm test tubes and sterilise by autoclaving at 121°C for 15 minutes. Cool rapidly then aseptically add to each tube 0.3ml of a sterile solution of Potassium tellurite 3.5% SR0030.
The medium requires the addition of a 3.5% solution of Potassium tellurite when there is a direct addition of 1g of the sample to 19mls of broth. This level of Potassium tellurite is necessary to suppress the high numbers of contaminating organisms that could be expected.
The use of a diluted solution of Potassium tellurite is applicable when a 1 in 10 dilution of the food sample is carried out. In such cases the SR0030 should first be diluted 1 in 10 with sterile distilled water.
The addition of 0.1% Tween 80 can be recommended in order to improve recovery of heat injured Staphylococcus aureus cells e.g. from milk powder. 1g of Tween 80 should be added to 1 litre of CM0523 prior to autoclaving.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.

Oxoid MRVP Medium. A glucose-phosphate medium is used for the differentiation of the coli-aerogenes group by the Methyl Red and Voges-Proskauer tests.

MRVP Medium, Oxoid Composition

MRVP Medium, Oxoid Preparation:
Add 17g to 1 litre of distilled water. Mix well, distribute into final containers and sterilise by autoclaving at 121°C for 15 minutes.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-6°C.

Precautions
The MR-VP reactions are only part of the tests required to identify organisms.
Each laboratory should standardise on the inoculum density, volume of broth and the test container size.
MR tests require a minimum incubation of 48 hours before the pH indicator is added.
When using Barritt’s reagents add a-naphthol first and KOH second; do not reverse this order.
Vaughn et al. warned of false positive VP reactions if the completed tests are left standing for over an hour.