LabMal specialises in online distribution of life science products & services, lab consumables and general lab equipment.
FEATURED PRODUCTS
Silica gel 60 (0.063-0.200 mm) for column chromatography (70-230 mesh ASTM)-Merck
RM0.00Brand:
Merck
Description
Cas Number : 7631-86-9
Molecular mass : 60.08 g/mol
Chemical formula : SiO₂
Silica gel 60 (0.063-0.200 mm) for column chromatography (70-230 mesh ASTM). CAS No. 7631-86-9, EC Number 231-545-4.
Sodium Carbonate Anhydrous, AR, 1kg
RM23.00Brand:
Chemiz
Description
Synonyms: Calcined soda, Carbonic acid disodium salt, Soda ash, Sodium carbonate
Formula: Na2CO3
Sodium carbonate anhydrous is a water insoluble sodium source that is normally used in synthesis of other sodium compounds. Carbonate compounds also releases carbon dioxide when treated with diluted acid.
Note:
AR: Analitycal Reagent Grade: Reagents for analytical purpose or research work that need high purity.
CP: Chemically Pure Grade: Reagents for regular practical in its original purity.
Ob5 Cloxacillin
RM80.00Brand:
Thermo ScientificTM OxoidTM
MacConkey Agar No.2 500g
RM655.00Brand:
Thermo ScientificTM OxoidTM
Oxoid MacConkey Agar No. 2 is a modification of MacConkey Agar No. 3 with addition of Bile Salts No. 2 for detection of Enterococci.
MacConkey Agar No. 2, Oxoid Composition
| Typical Formula* |
gm/litre |
| Peptone |
20.0 |
| Lactose |
10.0 |
| Bile salts No.2 |
1.5 |
| Sodium chloride |
5.0 |
| Neutral red |
0.05 |
| Crystal violet |
0.001 |
| Agar |
15.0 |
| pH 7.2 ± 0.2 @ 25°C |
|
MacConkey Agar, Oxoid Preparation:
Suspend 51.5g in 1 litre of distilled water. Bring to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared plates at 2-8°C.
Nickel oxide Ni(II), 99.99% trace metals basis – Sigma-Aldrich
RM800.00 – RM3,064.00Price range: RM800.00 through RM3,064.00Brand:
Sigma-Aldrich
Synonyms
Nickel monoxide, Nickel(II) oxide, Nickelous oxide
Cas No.
1313-99-1
Application
Nickel(II) oxide can be used for a variety of sustainable applications such as:
non-enzymatic glucose sensor
hydrogen production
dye-sensitized solar cells (DSSCs)
TE Buffer
Brand:
Bio Basic
Description
This product is currently not available. Please contact us for more information.
‘TE is deriving from ‘Tris’, a common pH buffer and ‘EDTA’, a cation chelators like Mg2+. TE buffer is normally used in molecular biology to solubilize DNA, RNA or cDNA while protecting it from degradation, or used in the cell culture. Here, we provide TE buffer in 10x or 100x with pH ranging from 7.4 to 8.
SARS-CoV-2 Rapid Colorimetric LAMP Assay Kit – 96 rxns
RM0.00Brand:
New England Biolabs
This product, SARS-CoV-2 Rapid Colorimetric LAMP Assay Kit (NEB) is intended for research purposes only.
- Colorimetric LAMP enables simple, visual detection (pink-to-yellow) of amplification of SARS-CoV-2 nucleic acid
- Set up reactions quickly and easily, using a simple heat source and unique WarmStart® technology
- Reduce risk of carryover contamination, with UDG and dUTP included in the master mix
- Assay targets N and E regions of the SARS-CoV-2 genome, for optimized sensitivity and specificity
- Bring confidence to your results using the provided controls
- Learn more about LAMP and other isothermal amplification methods
- Learn more about how NEB is supporting COVID-19 research
- Need assistance designing LAMP primers? Use the NEB LAMP Primer Design Tool
- Learn more about how RT-LAMP is being used for rapid COVID-19 screening
Diagnostic Sensitivity Test Agar 500g
RM1,044.00Brand:
Thermo ScientificTM OxoidTM
Diagnostic Sensitivity Test Agar was developed in Oxoid as a dual purpose medium which would satisfy both diagnostic and susceptibility requirements.
Diagnostic Sensitivity Test Agar, Oxoid Composition
| Typical Formula* |
gm/litre |
| Proteose peptone |
10.0 |
| Veal infusion solids |
10.0 |
| Glucose |
2.0 |
| Sodium chloride |
3.0 |
| Disodium phosphate |
2.0 |
| Sodium acetate |
1.0 |
| Adenine sulphate |
0.01 |
| Guanine hydrochloride |
0.01 |
| Uracil |
0.01 |
| Xanthine |
0.01 |
| Aneurine |
0.00002 |
| Agar |
12.0 |
| pH 7.4 + 0.2 @ 25°C |
Diagnostic Sensitivity Test Agar, Oxoid Preparation:
Add 40 g to 1 litre of distilled water. Bring to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes.
For blood agar, cool the base to 50°C and add 7% of Defibrinated Horse Blood SR0050. Mix with gentle rotation and pour into Petri dishes (12 ml for a 9 cm dish) or other containers.
RECONSTITUTION AND MIXING SHOULD BE PERFORMED IN A FLASK AT LEAST 2.5 TIMES THE VOLUME OF MEDIUM TO ENSURE ADEQUATE AERATION OF THE BLOOD.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared agar plates at 2-8°C.
Precautions
Diagnostic Sensitivity Test Agar has reduced thymidine activity and this will affect its performance as a primary isolation medium.
Pro Disk w/Reagent 25TST/KT
RM0.00Brand:
Thermo Scientific™ Remel™
Thermo Scientific™ Remel PRO Disc w/Reagent is used for identification of yeast and anaerobic microorganisms primarily Candida albicans and Clostridium difficile.
Quick-Load Taq 2X Master Mix – 500 rxns
RM0.00Brand:
New England Biolabs
The industry standard
- Exceptional value in terms of cost per unit
- 2X master mix format for easy reaction setup – just add template DNA and primers
- Offered with inert tracking dyes for easy and direct loading of PCR products onto gels
Alkaline Peptone Water 500g
RM262.00Brand:
Thermo ScientificTM OxoidTM
Enrich and recover Vibrio species from food, water, and clinical samples with Thermo Scientific™ Oxoid™ Alkaline Peptone Water. This medium is selective by exploiting the ability of Vibrio species to tolerate alkaline conditions and high sodium chloride levels. The peptone content provides the conditions for growth and recovery of Vibrio species, supplying vitamins, minerals, and nitrogen in the form of amino acids.
Alkaline Saline Peptone Water, Oxoid Composition
| Typical Formula * |
gm/litre
|
| Peptone |
10.0 |
| Sodium chloride |
20.0 |
| pH 6.6 ± 0.2 @ 25°C |
Alkaline Saline Peptone Water, Oxoid Preparation:
Add 30g to 1 litre of distilled water. Mix well, distribute into final containers and sterilize by autoclaving at 121°C for 15 minutes.
Storage conditions and Shelf life
The dehydrated medium should be stored at 10-30°C and used before the expiry date on the label.
Store the prepared medium may be stored for up to 1 month at room temperature.
Tetracycline 256 M.I.C.E. (50 Pack)
RM0.00Brand:
Thermo ScientificTM OxoidTM
**This product is not available at the moment.
Effortlessly establish accurate Minimum Inhibitory Concentration (MIC) values manually using Thermo Scientific™ Oxoid™ Tetracycline M.I.C.Evaluator Strips (M.I.C.E.™).
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM152.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
RM424.00 – RM673.00Price range: RM424.00 through RM673.00Brand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form Brochure
OEM SeaKem® LE Agarose
RM1,514.00Brand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
- All Lonza Agarose is quality tested to certify performance
- High gel strength
- Low EEO
- Standard melting temperature
Applications
- Standard DNA/RNA Electrophoreisis
Content & Storage
- SeaKem® LE Agarose 500 g
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Brand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available

FEATURED PRODUCTS
Listeria Enrichment Broth Base UVM 500g
RM547.00Brand:
Thermo ScientificTM OxoidTM
- Oxoid Listeria Enrichment Broth Base (UVM Formulation) is a two-step selective enrichment (USDA-FSIS) method.
- Also available Listeria Primary Enrichment Supplement-UVM I, Part No. SR0142E or SR0142B and Listeria Secondary Selective Enrichment Supplement-UVM II, Part No. SR0143E.
Listeria Enrichment Broth Base (UVM formulation) is to be used with the appropriate supplement for UVMI broth or UVMII broth.
Listeria Enrichment Broth Base (UVM formulation), Oxoid Composition
| Typical Formula* |
gm/litre |
| Proteose peptone |
5.0 |
| Tryptone |
5.0 |
| `Lab-Lemco’ powder |
5.0 |
| Yeast extract |
5.0 |
| Sodium chloride |
20.0 |
| Disodium hydrogen phosphate |
12.0 |
| Potassium dihydrogen phosphate |
1.35 |
| Aesculin |
1.0 |
| pH 7.4 ± 0.2 @ 25°C |
|
Listeria Enrichment Broth, Oxoid Preparation:
Suspend 27.2g in 500ml of distilled water. Sterilise by autoclaving at 121°C for 15 minutes. Cool to 50°C.
To Prepare Listeria Primary Selective Enrichment Medium (UVM I):
Aseptically add the contents of 1 vial of Listeria Primary Selective Enrichment Supplement (UVM I) SR0142 reconsituted as directed. Mix well and distribute into sterile containers.
To Prepare Listeria Secondary Selective Enrichment Medium (UVM II):
Aseptically add the contents of 1 vial of Listeria Secondary Selective Enrichment Supplement (UVM II) SR0143 reconsituted as directed. Mix well and distribute into sterile containers.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
Precautions
Note the precautions stated under Listeria Selective Medium (Oxford) CM0856 and SR0140.
Broth cultures are more dangerous than colonies on agar plates.
Store prepared medium away from light. Acriflavine can photo-oxidise to form inhibitory compounds against listeriae.
Deoxynucleotide Solution Set – 25 umol of each
RM0.00Brand:
New England Biolabs
- Enhance your PCR reaction with our ultrapure dNTPs
- Compatible with all NEB DNA polymerases in a variety of applications
- Ultrapure: ≥ 99% as determined by HPLC analysis
- Exceptional stability
Tris-(8-hydroxyquinoline) aluminum – Sigma-Aldrich
RM357.00Brand:
Sigma-Aldrich
Synonyms
8-Hydroxyquinoline aluminum salt, Alq3, Aluminum 8-hydroxyquinolinate, Aluminum oxinate, Tris-(8-hydroxyquinolinato)aluminum
Cas No.
2085-33-8
General description
Alq3 crystals exist in two isomeric states, meridional and facial isomers. A third isomeric state ( γ) was studied by X-ray diffraction, the δ-Alq3 transforms into γ-form at ~180°C. Mechanism of the Alq3 phosphorescence has been studied.
Application
Key green-light emitting and electron transport material for OLEDs.
Tungsten disulfide, nanopowder, 90 nm avg. part. size (SEM) – Sigma-Aldrich
RM566.00Brand:
Sigma-Aldrich
Synonyms
Monotungsten disulfide, Tungsten disulfide, Tungsten(IV) sulfide
Cas No.
12138-09-9
Application
Tungsten sulfide possesses a pseudo 2 dimensional structure with applications in the Petrochemical industry as a desulfurization catalyst. Tungsten Sulfide nanoparticles have drawn research interest due to their potential in solid-state lubricants; coatings and photocatalysts.
Parafilm M® All-Purpose Laboratory Film
RM129.00Brand:
VWR
Parafilm, a semi-transparent, flexible film that adheres quickly and firmly. It can be sealed to itself, culture tubes or flasks and petri dish edges.
- Waterproof sheet interwound with paper to prevent adhering
- Flexible, odourless and tasteless
- Resistant to air, gases, alcohol, acids and alkalies
Benzene Anhydrous, 99.8% – Sigma-Aldrich
RM977.00Brand:
Sigma-Aldrich
Description
CAS Number: 71-43-2
Empirical Formula: C6H6
Molecular Weight: 78.11
Synonyms: –
Assay: 99.8%
Benzene is a six-membered aromatic compound that can undergo ionization induced by superhalogens, according to ab initio calculations. This compound is a frequently used industrial solvent but is also considered an air pollutant and a powerful carcinogen.
Benzene may be used in the formation of phenyl acetate by aerobic oxidation using Pd catalyst and acetic acid as solvent, formation of phenol by hydroxylation in the presence of mesoporous carbon nitride supported on vanadium catalyst and as a solvent to prepare nanoparticles of gallium nitride (GaN) by reacting Li3N and GaCl3 at 280°C.
Lithium nickel manganese cobalt oxide, powder, <0.5 μm particle size, >98% – Sigma-Aldrich
RM1,318.00Brand:
Sigma-Aldrich
Synonyms
NMC
General Description
Lithium nickel manganese cobalt oxide (NMC) is a class of electrode material that can be used in the fabrication of lithium-ion batteries. Lithium-ion batteries consist of anode, cathode, and electrolyte with a charge-discharge cycle. These materials enable the formation of greener and sustainable batteries for electrical energy storage.
We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product has been enhanced for energy efficiency. Find details here.
Applications
NMC is a novel lithium insertion electrode material for advanced lithium-ion batteries. Mn doping significantly increases the thermal stability besides increasing the electrochemical charge-discharge behavior.
NMC111 (lithium nickel-manganese-cobalt oxide with a stoichiometry of 1:1:1) is a promising cathode material used in advanced lithium-ion batteries, particularly for electric vehicle applications, due to its high energy density and long cycle life. NMC111 powder has a layered crystal structure that enables efficient, reversible lithium-ion diffusion, which is essential for good electrochemical performance. Manganese doping improves the thermal stability of the material while enhancing its electrochemical charge-discharge behavior. Compared to other NMC materials, NMC111 has a higher thermal stability and is less prone to thermal runaway, making it a safer option for battery applications.
Features & Benefits
Our NMC111 has engineered improvements over other LiNMC materials including thermal stability and high conductivity:
- More Reliable
- Longer Cycle Life
- Bulk and Pilot Scale Available
Legal Information
Product of Engi-Mat Co.
OmniPAGE Mini
Brand:
Cleaver Scientific
Cleaver Scientific Mini Vertical systems are predominantly used for protein electrophoresis. They include the OmniPAGE CVS10TETRAD systems equipped with enough combs and glass plates to run 4 gels, and the standard OmniPAGE CVS10 systems, which accommodate up to 2 handcast or commercial precast gels.
Dimethyl Sulfoxide, Anhydrous, ≥99.9% (Sigma-Aldrich)
RM657.00 – RM1,844.00Price range: RM657.00 through RM1,844.00Brand:
Sigma-Aldrich
Description
CAS number: 67-68-5
Linear Formula: (CH3)2SO
Molecular Weight 78.13
Synonym: DMSO
General description
Dimethyl Sulfoxide (DMSO) is an apolar protic solvent that is generally used as a reaction medium and reagent in organic reactions.
Application
Dimethyl Sulfoxide may be used as an oxidant for the conversion of isonitriles into isocyanates. DMSO activated by oxalyl chloride can be used in the oxidation of long-chain alcohols to carbonyls.
Desoxycholate Citrate Agar 500g
RM609.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Desoxycholate Citrate Agar is a differential medium for enumeration of coliforms and the isolation of enteric pathogens.
Desoxycholate Citrate Agar, Oxoid Composition
| Typical Formula* |
gm/litre |
| Lab-Lemco’ powder |
5.0 |
| Peptone |
5.0 |
| Lactose |
10.0 |
| Sodium citrate |
5.0 |
| Sodium thiosulphate |
5.0 |
| Ferric citrate |
1.0 |
| Sodium desoxycholate |
2.5 |
| Neutral red |
0.025 |
| Agar |
15.0 |
| pH 7.0 ± 0.2 |
Desoxycholate Citrate Agar, Oxoid Preparation:
Suspend 48.5g in 1 litre of distilled water. With frequent agitation bring to the boil over a gauze and flame to dissolve completely. Mix well and pour plates immediately. Dry the agar surface before use.
THIS MEDIUM IS HEAT SENSITIVE. AVOID EXCESSIVE OR PROLONGED HEATING DURING RECONSTITUTION. DO NOT AUTOCLAVE, OR REMELT.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared agar plates at 2-8°C.
Precautions
The medium is best used freshly prepared.
Stock cultures of Shigella species may become predominantly in the R-phase when subcultured away from DCA media. Such cultures are difficult to use for control purposes without first heavily streaking the cultures on DCA plates and picking off the few S-phase colonies i.e. the macro-colonies on the agar surface, for further subculture.
When making biochemical tests on colonies picked from the surface of DCA plates, purity subcultures should be carried out because the colony may be contaminated with Escherichia coli present as micro-colonies.
Glutathione, Certified Reference Material (Sigma-Aldrich)
RM628.00Brand:
Sigma-Aldrich
Description
CAS number: 70-18-8
Chemical Formula: H2NCH(CO2H)CH2CH2CONHCH(CH2SH)CONHCH2CO2H
Molar Mass: 307.32g/mol
Synonyms: γ-L-Glutamyl-L-cysteinyl-glycine, L-Glutathione reduced, GSH
Amino Acid Sequence
γ-Glu-Cys-Gly
General description
Glutathione (GSH) is the most important nonprotein thiol widely distributed in animal tissues, plants, and microorganisms. GSH is also a key determinant of redox signalling and protection against oxidative stress.
Pharmaceutical secondary standards for application in quality control, provide pharma laboratories and manufacturers with a convenient and cost-effective alternative to the preparation of in-house working standards.
Application
HPLC: suitable
Gas Chromatography (GC): suitable
These Secondary Standards are qualified as Certified Reference Materials. These are suitable for use in several analytical applications including but not limited to pharma release testing, pharma method development for qualitative and quantitative analyses, food and beverage quality control testing, and other calibration requirements.
May be used at 5-10 mM to elute glutathione S-transferase (GST) from glutathione agarose.
Biochem/physiol Actions
Endogenous antioxidant that plays a major role in reducing reactive oxygen species formed during cellular metabolism and the respiratory burst. Glutathione-S-transferase catalyzes the formation of glutathione thioethers with xenobiotics, leukotrienes, and other molecules that have an electrophilic center. Glutathione also forms disulfide bonds with cysteine residues in proteins. Via these mechanisms, it can have the paradoxical effect of reducing the efficacy of anti-cancer agents.
MacConkey Broth (Purple) (CM5a) 500g
RM517.00Brand:
Thermo ScientificTM OxoidTM
Detect coliform organisms in water and milk examination with Thermo Scientific™ Oxoid™ MacConkey Broth Purple (Dehydrated). Bromocresol purple indicator in the medium provides more sensitive and definite indications of acid production as compared to neutral red indicator and is less inhibitory to Escherichia coli. The use of bromocresol purple corresponds to the alternative formulations recommended in ‘The Bacteriological Examination of Water Supplies’ and ‘International Standard for Drinking Water’.
MacConkey Broth Purple, Oxoid Composition
| Typical Formula* |
gm/litre |
| Peptone |
20.0 |
| Lactose |
10.0 |
| Bile salts |
5.0 |
| Sodium chloride |
5.0 |
| Bromocresol purple |
0.01 |
| pH 7.4 ± 0.2 @ 25°C |
MacConkey Broth Purple, Oxoid Preparation:
To prepare single strength broth add 40g to 1 litre of distilled water. Distribute into containers fitted with fermentation (Durham) tubes. Sterilise by autoclaving at 121°C for 15 minutes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at room temperature.
OmniPur Water, WFI Quality, Sterile Purified Water, Cell Culture Tested – CAS7732-18-5, 1L
RM152.00Brand:
Merck
** This product has been discontinued.
OmniPur Water is sterile water that is tested to be DNase free, Protease free, RNase free and bacterial free.
It is suitable to be used in:
- Cell Biology
- Cell culture media preparation, extraction buffer, Molecular work, reconstitute of compound
- Diluent for live cells staining
- Sterile solution preparation Microbiology Sample Preparation
- Diluent and rinsing reagent in Microbial Membrane Filtration
Key Specification:
- Sterile by USP Standard
- DNase, RNase, Protease-Free
- < 500 ppb Total Organic Carbon
- < 0.025 EU/ml Bacterial Endotoxin
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form
RM424.00 – RM673.00Price range: RM424.00 through RM673.00Brand:
Sigma-Aldrich
This is the most enriched variation of the EMEM formulation offered that suitable for cell culuture. It contains all 21 normal amino acids, some at increased concentrations. In addition, it contains 5 additional vitamins. Refer to the table below and choose your preferecd EMEM!
Minimum Essential Medium Eagle (EMEM) with Alpha Modification, powder form Brochure
OEM SeaKem® LE Agarose
RM1,514.00Brand:
Lonza
Product Overview
SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from lot-to-lot. This molecular biology grade agarose has no detectable DNase or RNase activity and forms strong gels with low background upon ethidium bromide, SYBR® Green, or GelStarTM Staining. Due to its low EEO, DNA will have a high electrophoretic mobility. SeaKem® LE Agarose is also recommended for protein gel electrophoresis in applications such as Ouchterlony and radial immunodiffusion (RID). Information about bulk and custom packaging is available through Lonza’s Customer Service Team.
Benefits
- All Lonza Agarose is quality tested to certify performance
- High gel strength
- Low EEO
- Standard melting temperature
Applications
- Standard DNA/RNA Electrophoreisis
Content & Storage
- SeaKem® LE Agarose 500 g
1 kb DNA Ladder, NEB
Brand:
New England Biolabs
This 1 kb DNA ladder is available in Quick-Load Purple format – enjoy the convenience of a ready-to-load format.
1 kb DNA ladder from New England Biolabs (NEB) is suitable for use with molecular weight standard for agarose gel electrophoresis. A number of proprietary plasmids are digested to completion with appropriate restriction enzymes to yield 10 bands, ranging from 0.5 to 10 kilobases. NEB set 3.0 kb fragment as a reference band by increasing the intensity of that band.
- Size range: 500 bp to 10 kb
- Value pricing
- Supplied with a free vial of Gel Loading Dye, Purple (6X), no SDS (NEB #B7025).
- Easy to identify reference bands
- Small size suitable for 200 gel lanes; large size suitable for 1000 gel lanes
Q5 Hot Start High-Fidelity 2X Master Mix
Brand:
New England Biolabs
Fidelity at its finest
Q5® High-Fidelity DNA Polymerase sets a new standard for both fidelity and robust performance. With the highest fidelity amplification available (~280 times higher than Taq), Q5 DNA Polymerase results in ultra-low error rates. Q5 DNA Polymerase is composed of a novel polymerase that is fused to the processivity-enhancing Sso7d DNA binding domain, improving speed, fidelity and reliability of performance.
- Highest fidelity amplification (~280X higher than Taq)
- Ultra-low error rates
- Superior performance for a broad range of amplicons (from high AT to high GC)
- Hot start and master mix formats available
PRODUCT CATEGORIES
DISTRIBUTION PARTNERS
LabMal is the online distribution of life science and biotechnology products, including microbiology, molecular biology, cell biology, general lab equipment, plastic consumables, chemical, cleansing solution and protein. If you are interested in the products from our distribution partners that are not available in Labmal, please contact us at 03-8051 5106 or info@labmal.com.












