- You cannot add zero priced products to the cart.
Legionella CYE Agar Base 500g
RM0.00Brand:
Thermo ScientificTM OxoidTM
Isolate Legionella from environmental samples and clinical specimens using Thermo Scientific™ Oxoid™ Legionella CYE Agar Base when used with Legionella Growth Supplement SR01110. Legionella CYE Agar Base is a non-selective medium that exhibits optimal recovery of legionellaceae in short incubation periods from both environmental samples and clinical specimens.
Legionella CYE Agar Base, Oxoid Composition
| Typical Formula* |
gm/litre |
| Activated charcoal |
2.0 |
| Yeast extract |
10.0 |
| Agar |
13.0 |
BCYE Agar, Oxoid Preparation:
Suspend 2.5g of Legionella CYE Agar Base per 90ml of distilled water and bring gently to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes. Reconstitute one vial SR0110A per 100ml medium or one vial SR0110C per 500ml medium, as directed. Allow medium to cool to 50°C and aseptically add the vial contents. Mix gently and pour into sterile Petri dishes. The final pH of the medium should be 6.9 ± 0.2.
Storage conditions and Shelf life
Store the dehydrated medium below 30°C and use before the expiry date on the label.
Store the prepared plates at 2-8°C away from light.
Leishman’s Eosin Methylene Blue Solution Modified (Merck)
RM214.00Brand:
Merck
Description
The staining method according to Leishman is one of the standard techniques in hematological diagnostic procedures. Like Wright’s eosin methylene blue solution and May-Grünwald’s eosin methylene blue solution, it is used for staining of blood and bone marrow smears and clinical cytological specimens. The typical resulting color of cell nuclei is red to purple, which depends on the buffer tablets (Buffer tablets pH 7.2 or Buffer tablets pH 6.8). 500 mL of the IVD & CE-registered Leishman’s eosin methylene blue solution are sufficient for staining up to 1600 slides in Hellendahl cells. It is registered as IVD and CE product.
Application
For microscopy. For staining of blood and bone marrow smears and clinical-cytological specimens
Product Specification and MSDS for Leishman’s eosin methylene blue solution modified (Merck).
Leupeptin, 100 mg
RM1,613.00Brand:
Merck
Description
Leupeptin is an organic compound produced by actinomycetes, serine and cysteine proteases reversibly. Inhibits trypsin-like proteases and some cysteine proteases including endoproteinase Lys-C, Kallikrein, papain, thrombin, cathepsin B and trypsin.
MW:426.56 s 49.04 . 18.02 {C20H36N6O4 . ½H2SO4 . H2O}
Ac-Leu-Leu-Argininal (hemi-sulfated form). Thus material has three tautomeric isomers that can be visualized by chromatography.
Appearance: White amorphous powder
Working range 10-100μM. Stable for several hours in water. Stock solutions of 10mM in water are stable for 1 week at 4ºC and 6 months at -20ºC.
5mg/1.054 mL = 10mM. Typically dilute 1:100 for a 100μM working solution.
Source: Organic isolated from actinomycetes.
Maintain dry at -20ºC for up to 18 months after date of receipt. Store reconstituted product in aliquots at -20ºC for up to 6 months. Avoid repeated thaw freeze cycles.
Lev1 Levofloxacin
RM0.00Brand:
Thermo ScientificTM OxoidTM
Lev5 Levofloxacin
RM79.00Brand:
Thermo ScientificTM OxoidTM
Levo ME Pipette Filler
RM0.00Brand:
Biologix
This product is not available at the moment. Please contact us for more information.
The Levo ME Pipette Filler has improved ergonomics and streamlined function for a more convenient pipetting experience.
Features
• Ergonomic shape and intuitive operation
• Pressure-sensitive buttons: increasing pressure increases aspiration/dispensing speed
• Autoclavable hydrophobic filter prevents over-aspiration
• Rechargeable, long-lasting battery
• LED light indicates aspiration/dispensing, charging, and low battery
• Compatible with almost all standard glass or plastic pipettes
Levo Plus Pipette Filler
RM0.00Brand:
Biologix
This product is not available at the moment. Please contact us for more information.
The Levo Plus pipette filler efficiently aspirates and dispenses liquids, its powerful motor filling a 25 mL pipette in less than 5 seconds. It is compatible with most standard glass and plastic pipettes with volumes ranging from 0.1 – 100 mL.
Features
• Lightweight, ergonomic design
• Convenient one-handed operation
• Eight aspiration and dispensing speeds
• LCD display shows speed settings and remaining battery life
• Efficient lithium-ion battery can last for up to 8 hours of intermittent use
• Replaceable hydrophobic 0.45 μm filter
• Integral, autoclavable silicone adapter suits use with 0.1 – 100 mL pipettes
• Can be used while charging
Levofloxacin 32 M.I.C.E. (10 Pack)
RM0.00Brand:
Thermo ScientificTM OxoidTM
**This product is not available at the moment.
Effortlessly establish accurate Minimum Inhibitory Concentration (MIC) values manually using Thermo Scientific™ Oxoid™ Levofloxacin M.I.C.Evaluator Strips (M.I.C.E.™).
Levofloxacin 32 M.I.C.E. (50 Pack)
RM0.00Brand:
Thermo ScientificTM OxoidTM
**This product is not available at the moment.
Effortlessly establish accurate Minimum Inhibitory Concentration (MIC) values manually using Thermo Scientific™ Oxoid™ Levofloxacin M.I.C.Evaluator Strips (M.I.C.E.™).
Linezolid 256 M.I.C.E. (10 pack)
RM0.00Brand:
Thermo ScientificTM OxoidTM
**This product is not available at the moment.
Effortlessly establish accurate Minimum Inhibitory Concentration (MIC) values manually using Thermo Scientific™ Oxoid™ Linezolid M.I.C.Evaluator Strips (M.I.C.E.™).
Linezolid 256 M.I.C.E. (50 Pack)
RM0.00Brand:
Thermo ScientificTM OxoidTM
**This product is not available at the moment.
Effortlessly establish accurate Minimum Inhibitory Concentration (MIC) values manually using Thermo Scientific™ Oxoid™ Linezolid M.I.C.Evaluator Strips (M.I.C.E.™).
Listeria Enrichment Broth Base 500g
RM658.00Brand:
Thermo ScientificTM OxoidTM
- Oxoid Listeria Enrichment Broth is used for the enrichment of Listeria species.
- Also available Listeria Selective Supplement, Part No. SR0140E or SR0141E and Modified Listeria Selective Enrichment Supplement, Part No. SR0206E or SR0206B.
Listeria Enrichment Broth Base, Oxoid Composition
| Typical Formula* |
gm/litre |
| Tryptone soya broth |
30.0 |
| Yeast extract |
6.0 |
| pH 7.3 ± 0.2 @ 25°C |
Listeria Enrichment Broth, Oxoid Preparation:
Suspend 18g in 500ml of distilled water. Add the contents of one vial of Listeria Selective Enrichment Supplement (SR0141), reconstituted with 2ml of distilled water. Sterilize by autoclaving at 121°C for 15 minutes. Cool to 50°C, mix well and distribute into sterile containers in volumes as required.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
Precautions
Note the precautions stated under Listeria Selective Medium (Oxford) CM0856 and SR0140. Broth cultures are more dangerous than colonies on agar plates.
Store prepared medium away from light. Acriflavine can photo-oxidise to form inhibitory compounds against Listeria.
Supplement SR0141 used in this medium contains a toxic concentration of cycloheximide. Note the precautions to be taken under HAZARDS.
Listeria Enrichment Broth Base UVM 500g
RM547.00Brand:
Thermo ScientificTM OxoidTM
- Oxoid Listeria Enrichment Broth Base (UVM Formulation) is a two-step selective enrichment (USDA-FSIS) method.
- Also available Listeria Primary Enrichment Supplement-UVM I, Part No. SR0142E or SR0142B and Listeria Secondary Selective Enrichment Supplement-UVM II, Part No. SR0143E.
Listeria Enrichment Broth Base (UVM formulation) is to be used with the appropriate supplement for UVMI broth or UVMII broth.
Listeria Enrichment Broth Base (UVM formulation), Oxoid Composition
| Typical Formula* |
gm/litre |
| Proteose peptone |
5.0 |
| Tryptone |
5.0 |
| `Lab-Lemco’ powder |
5.0 |
| Yeast extract |
5.0 |
| Sodium chloride |
20.0 |
| Disodium hydrogen phosphate |
12.0 |
| Potassium dihydrogen phosphate |
1.35 |
| Aesculin |
1.0 |
| pH 7.4 ± 0.2 @ 25°C |
|
Listeria Enrichment Broth, Oxoid Preparation:
Suspend 27.2g in 500ml of distilled water. Sterilise by autoclaving at 121°C for 15 minutes. Cool to 50°C.
To Prepare Listeria Primary Selective Enrichment Medium (UVM I):
Aseptically add the contents of 1 vial of Listeria Primary Selective Enrichment Supplement (UVM I) SR0142 reconsituted as directed. Mix well and distribute into sterile containers.
To Prepare Listeria Secondary Selective Enrichment Medium (UVM II):
Aseptically add the contents of 1 vial of Listeria Secondary Selective Enrichment Supplement (UVM II) SR0143 reconsituted as directed. Mix well and distribute into sterile containers.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
Precautions
Note the precautions stated under Listeria Selective Medium (Oxford) CM0856 and SR0140.
Broth cultures are more dangerous than colonies on agar plates.
Store prepared medium away from light. Acriflavine can photo-oxidise to form inhibitory compounds against listeriae.
Listeria Primary Enrichment Supplement (UVMI) 1X10Vials
RM0.00Brand:
Thermo ScientificTM OxoidTM
Thermo Scientific™ Oxoid Listeria Primary Enrichment Supplement (UVMI) is a primary selective enrichment supplement for the isolation of listeria when used with Listeria Enrichment Broth Base (UVM Formulation) CM0863.
Oxoid Listeria Primary Enrichment Supplement (UVMI), Oxoid Composition
| Vial contents (each vial is sufficient for 500ml of medium) |
per vial
|
per litre
|
| Nalidixic acid |
10.0mg |
20.0mg
|
| Acriflavine hydrochloride |
6.0mg |
12.0mg
|
Listeria Primary Selective Enrichment Medium, Oxoid Preparation:
Suspend 27.2g in 500ml of distilled water. Sterilise by autoclaving at 121°C for 15 minutes. Cool to 50°C.
Aseptically add the contents of 1 vial of Listeria Primary Selective Enrichment Supplement (UVM I) SR0142 reconsituted as directed. Mix well and distribute into sterile containers.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
Precautions
Note the precautions stated under Listeria Selective Medium (Oxford) CM0856 and SR0140.
Broth cultures are more dangerous than colonies on agar plates.
Store prepared medium away from light. Acriflavine can photo-oxidise to form inhibitory compounds against listeriae.
Listeria Secondary Enrichment Supplement (UVMII) 1x10v
RM0.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Listeria Secondary Selective Enrichment Supplement, UVMII is used in a two-step selective enrichment (USDS-FSIS) method for the enrichment of Listeria spp.
- Add to Listeria Enrichment Broth Base (UVM formulation), Part No. CM0863B
- Each vial supplements 500mL of medium
Listeria Secondary Selective Enrichment Supplement (UVMII), Oxoid Composition
| Vial contents (each vial is sufficient for 500ml of medium) |
per vial
|
per litre
|
| Nalidixic acid |
10.0mg |
20.0mg
|
| Acriflavine hydrochloride |
12.5mg |
25.0mg
|
Listeria Secondary Selective Enrichment Medium, Oxoid Preparation:
Suspend 27.2g in 500ml of distilled water. Sterilise by autoclaving at 121°C for 15 minutes. Cool to 50°C.
Aseptically add the contents of 1 vial of Listeria Secondary Selective Enrichment Supplement (UVM II) SR0143 reconsituted as directed. Mix well and distribute into sterile containers.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
Precautions
Note the precautions stated under Listeria Selective Medium (Oxford) CM0856 and SR0140.
Broth cultures are more dangerous than colonies on agar plates.
Store prepared medium away from light. Acriflavine can photo-oxidise to form inhibitory compounds against listeriae.
Listeria Selective Agar Base 500g
RM663.00Brand:
Thermo ScientificTM OxoidTM
- Oxoid Listeria Selective Oxford Agar Base is a selective and diagnostic medium for the detection of Listeria monocytogenes.
- Also available Listeria Selective Supplement, Part No. SR0140E and Modified Listeria Selective Supplement, Part No. SR0206E or SR0206B.
Listeria Selective Oxford Agar Base, Oxoid Composition
| Typical Formula* |
gm/litre |
| Columbia Blood Agar Base |
39.0 |
| Aesculin |
1.0 |
| Ferric ammonium citrate |
0.5 |
| Lithium chloride |
15.0 |
| pH 7.0 ± 0.2 @ 25°C |
|
Listeria Selective Oxford Agar, Oxoid Preparation:
Suspend 27.75 of the Listeria Selective Agar Base (Oxford Formulation) in 500ml of distilled water. Bring gently to the boil to dissolve. Sterilise by autoclaving at 121°C for 15 minutes. Cool to 50°C and aseptically add the contents of one vial of Listeria Selective Supplement (Oxford Formulation) or Modified Listeria Selective Supplement (Oxford) SR0206, SR0140 reconstituted with 5ml of 70% ethanol. Mix well and pour into sterile Petri dishes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared plates at 2-8°C in the dark.
Listeria Selective Enrich Supplement 10×2.25 Litres
RM1,628.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Listeria Selective Enrichment Supplement, Modified is used for the enrichment of Listeria spp.
- Modified with 10mg/L acriflavin
- Add to Listeria Enrichment Broth, Part No. CM0862B
- Each vial supplements 2.25L of medium
Listeria Selective Enrichment Supplement (Modified), Oxoid Composition
| Vial contents (each vial is sufficient for 2,250mls of medium) |
per vial
|
per litre
|
| Nalidixic acid |
90.0mg |
40.0mg
|
| Cycloheximide |
112.5mg |
50.0mg
|
| Acriflavine hydrochloride |
22.5mg |
10.0mg
|
Listeria Selective Enrichment Medium Preparation:
Aseptically add 10ml of distilled water to one vial and invert gently to dissolve. Add the vial contents to 2.25 litres of Listeria Enrichment Broth Base. Sterilize by autoclaving at 121°C for 15 minutes. Cool to 50°C, mix well and distribute into sterile containers in volumes as required .
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
Listeria Selective Supplement (Oxford) 1 x 10 Vials
RM651.00Brand:
Thermo ScientificTM OxoidTM
- Oxoid Listeria Selective Supplement (Oxford) is used for the detection of Listeria monocytogenes.
- Add to Listeria Selective Agar Base, Part No. CM0856B.
Listeria Selective Supplement (Oxford), Oxoid Composition
| Vial contents (each vial is sufficient for 500ml of medium) |
per vial |
per litre
|
|
Cycloheximide
|
200mg
|
400mg
|
|
Colistin sulphate |
10.0mg |
20.0mg
|
|
Acriflavine |
2.5mg |
5.0mg
|
|
Cefotetan |
1.0mg |
2.0mg
|
|
Fosfomycin |
5.0mg |
10.0mg
|
Listeria Selective Medium Preparation:
Reconstitute one vial as directed, aseptically add the contents to 500 ml of Listeria Selective Agar Base (Oxford Formulation) CM0856, cooled to approximately 50°C. Mix well and pour into sterile Petri dishes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared plates at 2-8°C in the dark.
Listeria Selective Supplement 1 x 10 Vials
RM501.00Brand:
Thermo ScientificTM OxoidTM
Oxoid Listeria Selective Enrichment Supplement is used for the enrichment of Listeria spp.
- Add to Listeria Enrichment Broth, Part No. CM0862B
- Each vial supplements 500mL of medium
Listeria Selective Enrichment Supplement, Oxoid Composition
| Vial contents: (each vial is sufficient for 500ml of medium) |
per vial
|
per litre
|
| Nalidixic acid |
20.0mg |
40.0mg
|
| Cycloheximide |
25.0mg |
50.0mg
|
| Acriflavine hydrochloride |
7.5mg |
15.0mg
|
Listeria Selective Enrichment Medium Preparation:
Reconstitute one vial as directed, and add the contents to 500ml of Listeria Enrichment Broth Base (CM0862). Sterilize by autoclaving at 121°C for 15 minutes. Cool to 50°C and mix well before distributing into sterile containers in volumes as required.
Storage conditions and Shelf life
Listeria Selective Enrichment Supplement SR0141 as supplied should be stored at 2-8°C. When stored as directed the reagents are stable until the expiry date printed on the label.
Precautions
Listeria Selective Enrichment Supplement contains cycloheximide and is toxic if swallowed, inhaled or by skin contact. As a precaution when handling wear gloves and eye/face protection.
Acriflavine is activated by light and may form compounds inhibitory for Listeria.
Lithium cobalt oxide, 99.8% trace metals basis – Sigma-Aldrich
RM1,029.00Brand:
Sigma-Aldrich
Synonyms
LCO, Lithium cobalt(III) oxide, Lithium cobaltite
General Description
Lithium cobalt(III) oxide is a class of electrode material that can be used in the fabrication of lithium-ion batteries. Lithium-ion batteries consist of anode, cathode, and electrolyte with a charge-discharge cycle. These materials enable the formation of greener and sustainable batteries for electrical energy storage.
We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product has been enhanced for energy efficiency. Find details here.
Applications
Critical substance in the quest for high performance, advanced batteries.
Lithium cobalt(III) oxide (LiCoO2) can be used as a cathode material with a specific capacity of ~274 mAhg−1 for the fabrication of lithium-ion batteries. Commercially, these LiCoO2 fabricated Li-ion batteries can be used in a majority of smartphones. LiCoO2 can also be used in the formation of fuel cells.
Lithium cobalt oxide, lithium-niobate coated LCO cathode active material – Sigma-Aldrich
RM1,060.00Brand:
Sigma-Aldrich
Synonyms
Lithium cobalt(III) oxide, LCO, LiNbO3-coated LCO, Lithium cobaltite
General Description
Lithium niobate coated lithium cobalt(III) oxide (LCO) is a powdered form of layered (R-3m) LiCoO2 with a typical particle size of 4-10 microns. The particles are coated in 5-10 nm, less than 1 wt.%, amorphous lithium niobate (also called lithium niobium oxide or LiNbO3).
Applications
LiNbO3-coated LCO is a high-performance cathode active material designed for lithium-ion batteries (LIBs), including solid-state and high-voltage batteries. As a classic layered cathode material, LiCoO2 serves as a model system for fundamental research while also delivered a high insertion potential and high capacity. The LiNbO3 coating significantly enhances cathode stability by protecting the electrode and electrolyte from undesired reactions. It mitigates reactions between the cathode material and electrolyte, reducing capacity fade and minimizing the release of metal ions from the LCO cathode. Additionally, the highly ionically conductive LiNbO3 improves rate capability by reducing the space charge layer barrier at the electrolyte/cathode interface, resulting in superior Li diffusion and reduced electrode polarization.
Features & Benefits
- LCO classic model system for fundamental research
- LiNbO3 coating safeguards cathode and electrolyte, enhancing coulombic
- LiNbO3 insertion layer enhances rate capability
Lithium nickel cobalt aluminium oxide, electrode sheet, aluminum substrate, size 5 in. × 10 in. – Sigma-Aldrich
RM7,160.00Brand:
Sigma-Aldrich
Synonyms
NCA
General Description
Lithium nickel cobalt aluminium oxide (NCA) is a class of electrode material that can be used in the fabrication of lithium-ion batteries. Lithium-ion batteries consist of anode, cathode, and electrolyte with a charge-discharge cycle. These materials enable the formation of greener and sustainable batteries for electrical energy storage.
We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product has been enhanced for energy efficiency. Find details here.
Applications
NCA is Aluminum doped Lithium nickel cobalt oxide (LNCO). Al doping is found very effective to suppress the cell impedance rise by stabilizing the charge-transfer impedance on the cathode side besides increasing the thermal stability of the material. NCA shows excellent electrochemical performance.
The NCA casted electrode sheets can be cut into appropriate size and is ready to be used in lithium ion batteries.
Other Notes
Crystal Structure: Rhombohedral
Operating Condiditons:
- Recommended maximum charge voltage: 4.3 V vs Li/Li+
- Recommended maximum charge current: 4C
- Recommended cut-off voltage for discharge: 3.0 V vs Li/Li+
- Recommended charge method: constant current – constant voltage
Lithium nickel cobalt aluminium oxide, powder, <0.5 μm particle size, >98% – Sigma-Aldrich
RM1,216.00Brand:
Sigma-Aldrich
Synonyms
NCA
General Description
Lithium nickel cobalt aluminium oxide (NCA) is a class of electrode material that can be used in the fabrication of lithium-ion batteries. Lithium-ion batteries consist of anode, cathode, and electrolyte with a charge-discharge cycle. These materials enable the formation of greener and sustainable batteries for electrical energy storage.
Lithium nickel cobalt mixed oxide which is a continuous solid solution series between lithium nickel oxide and lithium cobalt oxide is widely used as a positive electrode for Lithium Ion Batteries. Lithium nickel cobalt aluminium oxide (LNCA) belongs to this family of layered transition metal oxides and is used as a cathode in Lithium Ion batteries in plug-in electric hybrid vehicles. Aluminium substitution in the cathode increases the cycling and thermal stability.
We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product has been enhanced for energy efficiency. Find details here.
Applications
Lithium nickel cobalt aluminum oxide (LNCO) can be used as a thermally stable cathode material. It shows good cyclic performance and can be operated around 3.65V. It is further utilized in the fabrication of lithium-ion batteries for hybrid electric vehicles.
NCA is Aluminum doped Lithium nickel cobalt oxide (LNCO). Al doping is found very effective to suppress the cell impedance rise by stabilizing the charge-transfer impedance on the cathode side besides increasing the thermal stability of the material. NCA shows excellent electrochemical performance.
Features & Benefit
High specific reversible capacity, good cycling stability and good thermal stability.
Legal Information
Product of Engi-Mat Co.
Lithium nickel manganese cobalt oxide, electrode sheet, aluminum substrate, size 5 in. × 10 in. – Sigma-Aldrich
RM3,218.00Brand:
Sigma-Aldrich
Synonyms
NMC
General Description
Lithium nickel manganese cobalt oxide (NMC) is a class of electrode material that can be used in the fabrication of lithium-ion batteries. Lithium-ion batteries consist of anode, cathode, and electrolyte with a charge-discharge cycle. These materials enable the formation of greener and sustainable batteries for electrical energy storage.
We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product has been enhanced for energy efficiency. Find details here.
Applications
NMC electrode sheet has a layered structure and can be used as an active cathode material. It can further be used in combination with single electrolyte interphase (SEI) for the fabrication of lithium-ion batteries.
Other Notes
Crystal Structure: Rhombohedral
Operating Conditions:
- Recommended maximum charge voltage: 4.4 V vs Li/Li+
- Recommended maximum charge current: 1C
- Recommended cut-off voltage for discharge: 2.7 V vs Li/Li+
- Recommended maximum discharge current: 1 C
- Recommended charge method: constant current – constant voltage



