Shop

This product has been discontinued, please refer to SR0257E

Brilliance Listeria Selective Supplement is added to Brilliance Listeria Agar Base, Mfr. No. CM1080E and Mfr. No. CM1080B, a chromogenic medium for the isolation and differentiation of Listeria spp. in food samples.

• Add to Brilliance Listeria Selective Agar Base, Part No. CM1080B
• Each vial supplements 500mL of medium

Brilliance Listeria Selective Supplement, Oxoid Composition

Brilliance Listeria Agar, Oxoid Preparation:
Suspend 33.6g of Brilliance Listeria Agar Base (CM1080) in 480ml of distilled water. Mix well and sterilize by autoclaving at 121°C for 15 minutes. Cool the medium to 46°C and add one vial of Brilliance Listeria Selective Supplement, reconstituted as directed and one vial of Brilliance Listeria Differential Supplement. Mix well and pour into sterile Petri dishes.

Storage conditions and Shelf life
The dehydrated medium should be stored at 10-30°C and used before the expiry date on the label.
Prepared medium may be stored for up to 2 weeks at 2-8°C.

Thermo Scientific™ Brilliance Salmonella Agar Base is a chromogenic medium (formerly OSCM II) for isolation and presumptive identification of Salmonella spp. from food samples.

Brilliance Salmonella Agar Base, Oxoid Composition

 Brilliance Salmonella Agar, Oxoid Preparation:
Suspend 27g of Brilliance Salmonella Agar Base in 500ml of distilled water. Add the contents of 1 vial of Salmonella Selective Supplement, resuspended as directed. Mix well and sterilise by bringing to the boil with frequent agitation. Cool to around 50ºC, mix well and pour into sterile Petri dishes.
NOTE: It is critical that the selective supplement is added prior to heating. When preparing volumes greater than 1 litre contact Oxoid Technical Support for directions.

Storage conditions and Shelf life
Brilliance Salmonella Agar should be stored in the tightly capped original container at 10-30ºC. When stored as directed, the un-opened products will remain stable until the expiry date printed on the packaging.

Precautions
Brilliance Salmonella Agar is for in vitro diagnostic use only, by experienced microbiologists. It must not be used beyond the stated expiry date, or if the product shows any sign of deterioration.
Sterilise specimens, equipment and media properly after use.

Easily isolate, enumerate, and presumptively identify common organisms associated with urinary tract infections using Thermo Scientific™ Brilliance™ UTI Clarity™ Agar. Organisms are differentiated through the utilization of two chromogenic substrates and/or tryptophan.

Brilliance UTI Clarity Agar, Oxoid Composition

Brilliance UTI Clarity Agar, Oxoid Preparation:
To prepare the medium from the base, suspend 37g of Brilliance UTI Clarity Agar (CM1106) in 1 litre of distilled water. Mix well and sterilize by autoclaving at 121ºC for 15 minutes. Cool the medium to 50ºC and pour into sterile Petri dishes.

Storage conditions and Stability
Dehydrated Brilliance UTI Clarity Agar must be stored tightly capped in the original container at 10-30ºC.

Oxoid Brilliance UTI Clarity Agar plates should be stored in the original packaging, at the temperature stated on the pack or product specification, and protected from direct light.

When stored as directed, the unopened product will remain stable until the expiry date on the label. Locally prepared media can be stored for up to 2 weeks when made from CM1106 according to the manufacturer’s instructions and stored at 2-8ºC, out of direct sunlight. A longer shelf life may be attainable, but should be validated under the relevant, local manufacturing and storage conditions.

Precautions
Brilliance UTI Clarity Agar is for in vitro diagnostic use only, by experienced microbiologists. It must not be used beyond the stated expiry date, or if the product shows any sign of deterioration.

It should be noted that, as with all chromogenic media, organisms with atypical enzyme patterns may give anomalous reactions. The medium should be validated with locally prevalent strains to confirm sensitivity and specificity in the end-users hands, under local conditions.

A presumptive E. coli identification can be confirmed using DMAC indole reagent (do not use Kovac’s reagent as the colour of the pink colonies may be mistaken for the red colour of a positive indole result). The test should be performed on filter paper, not directly on the plate.

Sterilise specimens, equipment and media properly after use.

This product has been discontinued, please refer to CM1212B
Brilliance Listeria Agar Base is a chromogenic medium for the isolation, enumeration, and presumptive identification of Listeria spp., including Listeria monocytogenes. Also available Chromogenic Listeria Selective Supplement, Part No. SR0227E and Chromogenic Listeria Differential Supplement, Part No. SR0228E.

Brilliance Listeria Agar Base, Oxoid Composition

Brilliance Listeria Agar, Oxoid Preparation:
Suspend 33.6g of Brilliance Listeria Agar Base (CM1080) in 480ml of distilled water. Mix well and sterilize by autoclaving at 121°C for 15 minutes. Cool the medium to 46°C and add one vial of Brilliance Listeria Selective Supplement, reconstituted as directed and one vial of Brilliance Listeria Differential Supplement. Mix well and pour into sterile Petri dishes.

Storage conditions and Shelf life
The dehydrated medium should be stored at 10-30°C and used before the expiry date on the label.
Prepared medium may be stored for up to 2 weeks at 2-8°C.

Thermo Scientific™ Oxoid Brilliance™ UTI Agar (formerly Chomogenic UTI Agar ) is a chromogenic medium for the presumptive identification and differentiation of all the main micro-organisms that cause urinary tract infections (UTIs).

Brilliance UTI Agar, Oxoid Composition

Brilliance UTI Agar, Oxoid Preparation:
Suspend 56.3g of Brilliance UTI Agar in 1 litre of distilled water, mix well and sterilise by autoclaving at 121°C for 15 minutes. Cool to 50°C and mix well before pouring plates.

Storage conditions and Shelf life
Dehydrated Brilliance UTI Agar must be stored tightly capped in the original container at 10-30ºC.
Oxoid Brilliance UTI Agar plates should be stored in the original packaging, at the temperature stated on the pack or product specification, and protected from direct light.

When stored as directed, the unopened product will remain stable until the expiry date on the label. Locally prepared media can be stored for up to 2 weeks when made from CM0949 according to the manufacturer’s instructions and stored at 2-8ºC, in the dark. A longer shelf life may be attainable, but should be validated under the relevant, local manufacturing and storage conditions.

Select and identify salmonellae (other than Salmonella Typhi) from food, feed and water samples with Thermo Scientific™ Oxoid™ Modified Brilliant Green Agar (Dehydrated). The modified formula provides improved inhibition of Escherichia coli and Proteus species. The medium has been widely assessed in Europe and has been used in ISO standards.

Brilliant Green Agar (Modified), Oxoid Composition

Brilliant Green Agar (Modified), Oxoid Preparation:
Suspend 52g in 1 litre of distilled water. Heat gently with occasional agitation and bring just to the boil to dissolve the medium completely. DO NOT AUTOCLAVE. Cool to 50°C, mix well and pour plates.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared plates of medium at 2-8°C.

Precautions
Lactose-fermenting salmonellae may be present in foods.
Salmonella typhi and Shigella species may not grow on this medium.
Proteus, Citrobacter and Pseudomonas species may mimic enteric pathogens by producing small red colonies.

Oxoid Brilliant Green Agar (Kauffmann Medium) is used for increased recovery and selective isolation of Salmonella spp. other than S. Typhi.

• Also available Sulphamandelate Supplement, Part No. SR0087E

Brilliant Green Agar, Oxoid Composition

Brilliant Green Agar, Oxoid Preparation:
Suspend 50g in 1 litre of distilled water. Bring to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared plates of medium at 2-8°C.

Precautions
Lactose-fermenting salmonellae may be present in foods.
Salmonella typhi and Shigella species may not grow on this medium.
Proteus, Citrobacter and Pseudomonas species may mimic enteric pathogens by producing small red colonies.

Oxoid Brilliant Green Bile Broth 2% is used for detection or confirmation of presence of members of coli-aerogenes group.

• Recommended for 44°C confirmatory test for Escherichia coli

Brilliant Green Bile Broth 2%, Oxoid Composition

Brilliant Green Bile Broth 2%, Oxoid Preparation:
Dissolve 40g in 1 litre of distilled water. Mix well, distribute into containers fitted with Durham’s tubes and sterilise by autoclaving at 121°C for 15 minutes.

Do not autoclave double stregnth medium. The alternative procedure is to heat the dissolved broth at 100°C for 30 minutes.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared tubes of broth at 2-8°C.

Precautions
Do not autoclave double-strength broth.
Gram-positive sporing organisms may produce gas if the bile/brilliant green inhibition is attenuated by food material.

For the preparation of serum-dextrose-antibiotic medium for the cultivation and isolation of Brucella using Brucella Selective Supplement SR0083 or SR0209. Without antibiotics, it may be used in conjunction with the Cruickshank dyestrip method for differentiation between strains.

Brucella Medium Base, Oxoid Composition

Brucella Medium, Oxoid Preparation:
Suspend 45 g in 1 litre of distilled water. Bring to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes. Cool to 50°C and add 5% of inactivated Horse Serum (i.e. Horse Serum held at 56°C for 30 minutes). Mix well before pouring.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared agar plates at 2-8°C.

Oxoid Brucella Selective Supplement is used for the isolation of Brucella spp.

• Add to Blood Agar Base No. 2, Part No. CM0271B; Columbia Blood Agar Base, Part No. CM0331B; or Brucella Medium Base, Part No. CM0169B
• Each vial supplements 500mL of medium

 Brucella Selective Supplement, Oxoid Composition

 Brucella Medium, Oxoid Preparation:
Reconstitute supplement as directed. Incubate for 10-15 minutes at 35°C. Mix thoroughly and immediately add the vial contents to 500 ml of sterile Oxoid Brucella Medium Base, cooled to 50°C together with 5-10% v/v sterile inactivated horse serum SR0035 and 1-5% w/v of a filter-sterilised 10% solution of dextrose. Mix well and pour into sterile petri dishes.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared agar plates at 2-8°C.

Oxoid Buffered Listeria Enrichment is selective enrichment medium for the detection of Listeria monocytogenes.

Buffered Listeria Enrichment Broth, Oxoid Composition

Buffered Listeria Enrichment, Oxoid Preparation:
Add 23.5g to 500ml of distilled water and mix well to dissolve. Add the contents of 1 vial of Listeria Selective Enrichment Supplement SR0141 or the alternative Modified Listeria Selective Supplement SR0213 reconstitued as directed. Sterilize by autoclaving at 121°C for 15 minutes. Cool to 50°C, mix well and aseptically distribute into sterile containers in volumes as required.

Storage conditions and Shelf life
Buffered Listeria Enrichment Broth should be stored tightly capped in the original container in a cool, dry place away from bright light. When stored as directed the medium will remain stable until the expiry date printed on the label.

Pre-enrich food samples prior to the isolation of Salmonella species using Thermo Scientific™ Oxoid™ Buffered Peptone Water (ISO) (Dehydrated). Buffered Peptone Water is a non-selective pre-enrichment medium and is tested in accordance with ISO 6579 and ISO 11133:2014. It also provides conditions for resuscitation of cells that have been injured by processes of food preservation.

Buffered Peptone Water (ISO), Oxoid Composition

Buffered Peptone Water (ISO), Oxoid Preparation:
Add 20.0g of Buffered Peptone Water (ISO) to 1 litre of distilled water. Mix well and distribute into final containers. Sterilise by autoclaving at 121°C for 15 minutes.

Method of use
The sample is added to Buffered Peptone Water (ISO) at a ratio of 1:10, and incubated at 36°C ± 2°C for 16-20 hours before transfer to selective enrichment media.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.

Pre-enrich food samples prior to the isolation of Salmonella species using Thermo Scientific™ Oxoid™ Buffered Peptone Water (ISO) (Dehydrated). Buffered Peptone Water is a non-selective pre-enrichment medium and is tested in accordance with ISO 6579 and ISO 11133:2014. It also provides conditions for resuscitation of cells that have been injured by processes of food preservation.

Buffered Peptone Water (ISO), Oxoid Composition

Buffered Peptone Water (ISO), Oxoid Preparation:
Add 20.0g of Buffered Peptone Water (ISO) to 1 litre of distilled water. Mix well and distribute into final containers. Sterilise by autoclaving at 121°C for 15 minutes.

Method of use
The sample is added to Buffered Peptone Water (ISO) at a ratio of 1:10, and incubated at 36°C ± 2°C for 16-20 hours before transfer to selective enrichment media.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.

Pre-enrich food samples prior to the isolation of Salmonella species using Thermo Scientific™ Oxoid™ Buffered Peptone Water (Dehydrated). Buffered Peptone Water is a non-selective pre-enrichment medium. It also provides conditions for resuscitation of cells that have been injured by processes of food preservation.

Buffered Peptone Water, Oxoid Composition

Buffered Peptone Water, Oxoid Preparation:
Add 20g to 1 litre of distilled water. Mix well and distribute into final containers. Sterilise by autoclaving at 121°C for 15 minutes. It is extremely important that the distilled water used is of a high quality with a low mineral content/conductivity.

Storage conditions and Shelf life
Store dehydrated medium at 10-30°C and use before the expiry date of the label.
Store the prepared medium at room temperature.

Pre-enrich food samples prior to the isolation of Salmonella species using Thermo Scientific™ Oxoid™ Buffered Peptone Water (Dehydrated). Buffered Peptone Water is a non-selective pre-enrichment medium. It also provides conditions for resuscitation of cells that have been injured by processes of food preservation.

Buffered Peptone Water, Oxoid Composition

Buffered Peptone Water, Oxoid Preparation:
Add 20g to 1 litre of distilled water. Mix well and distribute into final containers. Sterilise by autoclaving at 121°C for 15 minutes. It is extremely important that the distilled water used is of a high quality with a low mineral content/conductivity.

Storage conditions and Shelf life
Store dehydrated medium at 10-30°C and use before the expiry date of the label.
Store the prepared medium at room temperature.

Buffered Peptone Water (Dehydrated), CM0509B (Oxoid) is a non-selective pre-enrichment medium that used to pre-enrich food samples prior to the isolation of Salmonella species. It also provides conditions for the resuscitation of cells that have been injured by processes of food preservation.

Buffered Peptone Water, Oxoid Composition

Buffered Peptone Water, Oxoid Preparation:
Add 20g to 1 litre of distilled water. Mix well and distribute into final containers. Sterilise by autoclaving at 121°C for 15 minutes. It is extremely important that the distilled water used is of a high quality with a low mineral content/conductivity.

Storage conditions and Shelf life
Store dehydrated medium at 10-30°C and use before the expiry date of the label.
Store the prepared medium at room temperature.