Tec30 Teicoplanin
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
Teicoplanin 256 M.I.C.E. (10 Pack)
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
**This product is not available at the moment. Please contact us for more information.
Effortlessly establish accurate Minimum Inhibitory Concentration (MIC) values manually using Thermo Scientific™ Oxoid™ Teicoplanin M.I.C.Evaluator Strips (M.I.C.E.™).
Temperature Sensor and Support Clamp for Magnetic Stirrer Hot Plate
Login to see pricesBrand:
Biologix
This item is not available at the moment. Please contact us for more information.
Characteristics
Temperature sensor and support clamp for magnetic stirrer hot plate (Model# 01-3105).
Tergitol-7 Agar (Modified) 500g
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
Oxoid Tergitol 7 Agar is used for the enumeration and identification of coliforms.
Tergitol 7 Agar, Oxoid Composition
Typical Formula* |
gm/litre |
Peptone |
10.0 |
Yeast extract |
6.0 |
Meat extract |
5.0 |
Lactose |
20.0 |
Bromothymol blue |
0.05 |
Tergitol-7 |
0.1 |
Agar |
13.0 |
pH 7.2 ± 0.2 @ 25°C |
|
TTC Solution (SR0148) is supplied as 2ml of filtered 0.125% aqueous solution of tri-phenyltetrazolium chloride (TTC).
Tergitol 7 Agar, Oxoid Preparation:
Suspend 54.15g in 1 litre of distilled water. Bring to the boil to dissolve completely. Dispense in 100ml volumes and sterilise by autoclaving at 121°C for 15 minutes. Cool to 50°C and add the contents of 1 vial of SR0148. Mix well and pour into sterile Petri dishes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
Precautions
Tergitol-7 Agar is designed for early detection of Escherichia coli i.e. 6-10 hours incubation.
Incubation at 44°C has been recommended.
tert-Butyl methyl ether for liquid chromatography LiChrosolv®
Login to see pricesBrand:
Merck
Description
CAS number: 1634-04-4
Chemical Formula: (CH₃)₃COCH₃
Molar Mass: 88.15 g/mol
Synonyms: MTBE, MTB, 2-Methoxy-2-methylpropane, Methyl tert-butyl ether
With their high degree of UV transmittance, low particle count, low acidity and alkalinity and low evaporation residue level, LiChrosolv® solvents are ideal for reproducible separations. Since separations are normally carried out under gradient conditions in analytical HPLC, we offer solvents in “gradient grade” as well as “isocratic grade”. This enables to minimize the gradient effect of the solvent involved. Filtered by 0.2 µm filter
TES Hemisodium Salt, ≥99%
Login to see pricesBrand:
Sigma-Aldrich
Description
Empirical Formula: C6H14.5NO6S · 0.5 Na
Molecular Weight: 240.24
Synonyms: 2-[(2-Hydroxy-1,1-bis[hydroxymethyl]ethyl)amino]ethanesulfonic acid, N-tris(Hydroxymethyl)methyl-2-aminoethanesulfonic acid
Assay: ≥99%
Useful pH range: 6.8 – 8.2
Application: Diagnostic assay manufacturing
Solubility: Water: 0.25 g/mL, clear, colorless
Tetracycline 256 M.I.C.E. (10 Pack)
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
**This product is not available at the moment.
Effortlessly establish accurate Minimum Inhibitory Concentration (MIC) values manually using Thermo Scientific™ Oxoid™ Tetracycline M.I.C.Evaluator Strips (M.I.C.E.™).
Tetracycline 256 M.I.C.E. (50 Pack)
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
**This product is not available at the moment.
Effortlessly establish accurate Minimum Inhibitory Concentration (MIC) values manually using Thermo Scientific™ Oxoid™ Tetracycline M.I.C.Evaluator Strips (M.I.C.E.™).
Tetrahydrofuran for analysis EMSURE® ACS,Reag. Ph Eur (Merck)
Login to see pricesBrand:
Merck
Description
CAS number: 109-99-9
Chemical Formula: C₄H₈O
Molar Mass: 72.11 g/mol
Synonyms: THF, Tetramethylene oxide, Oxolane, Butylene oxide
EMSURE® grade solvents are suitable for a broad spectrum of classical lab applications and are frequently used in regulated and highly demanding lab applications. EMSURE® provides worldwide best and most extensive product specifications. We declare our EMSURE® range to be in compliance with the ACS, with the reagent part of the European Pharmacopoeia (Reag. Ph Eur) and also with the ISO standards.
Product Specification and MSDS for Tetrahydrofuran EMSURE® (Merck).
Tetrahydrofuran for liquid chromatography LiChrosolv®
Login to see pricesBrand:
Merck
Description
CAS number: 109-99-9
Chemical Formula: C₄H₈O
Molar Mass: 72.11 g/mol
Synonyms: THF, Tetramethylene oxide, Oxolane, Butylene oxide
With their high degree of UV transmittance, low particle count, low acidity and alkalinity and low evaporation residue level, LiChrosolv® solvents are ideal for reproducible separations. Since separations are normally carried out under gradient conditions in analytical HPLC, we offer solvents in “gradient grade” as well as “isocratic grade”. This enables to minimize the gradient effect of the solvent involved. Filtered by 0.2 µm filter
Tetrathionate Broth (USA) 500g
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
Oxoid Tetrathionate Broth is used for the selective enrichment of Salmonella spp.
Tetrathionate Broth, Oxoid Composition
Typical Formula* |
gm/litre |
Casein peptone |
2.5 |
Meat peptone |
2.5 |
Bile salts |
1.0 |
Calcium carbonate |
10.0 |
Sodium thiosulphate |
30.0 |
Tetrathionate Broth, Oxoid Preparation:
Suspend 46g in 1 litre of distilled water and bring to the boil. Cool to below 45°C and add 20ml of iodine-iodide solution immediately before use. Mix continuously whilst dispensing 10ml volumes into sterile tubes. Use the complete medium (with added iodine) on the day of preparation.
Iodine-Iodide Solution | |
Iodine |
6g |
Potassium iodide |
5g |
Distilled water |
20ml |
The base may be prepared beforehand and kept for several weeks at 4°C. Iodine-iodide solution can then be added at the time of use to the quantity of medium needed.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the base broth at 2-8°C. Use the medium immediately after adding the iodine solution.
Tetrathionate Broth Base 500g, Oxoid
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
Oxoid Tetrathionate Broth Base is used for selective enrichment of Salmonella species.
Tetrathionate Broth Base, Oxoid Composition
Add 77g to 1 litre of distilled water and bring to the boil. Cool below 45°C and add 20ml of iodine solution. Mix well and tube in 10ml quantities. The prepared base will keep for several weeks at 4°C but should be used soon after the addition of the iodine solution.
Iodine Solution
Iodine |
6 grams |
Potassium iodide |
5 grams |
Distilled water |
20ml |
Tetrathionate Broth Preparation:
Tetrathionate Broth is recommended for the selective enrichment method of isolating Salmonella typhi and other salmonellae from faeces, sewage, etc.
Organisms which reduce tetrathionate, such as salmonellae, flourish in the medium whilst many faecal organisms are inhibited. Members of the Proteus group reduce tetrathionate and may consequently impair the value of this medium for the isolation of salmonellae; this disadvantage of the medium is largely overcome by the addition of 40µg of novobiocin to each millilitre of the incomplete medium before the addition of iodine.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium (without iodine solution) at 2-8°C.
Tgc15 Tigecycline
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
TGT1XMINI Teaching Gel Tank
Login to see pricesBrand:
Cleaver Scientific
These industry standard tanks come in three sizes -to run six gels, four gels or a single gel. The gel trays are UV transparent and measure 7x7cm, each tank comes with two combs and two casting dams per gel tray. Supplied with highly flexible cable and connectors which are CE compliant, providing complete electrical isolation and safety. They have a special manufactured safety cover, which completely covers the tank of the system, making it one of the safest available.
TGT4XMINI Teaching Gel Tank
Login to see pricesBrand:
Cleaver Scientific
These industry standard tanks come in three sizes -to run six gels, four gels or a single gel. The gel trays are UV transparent and measure 7x7cm, each tank comes with two combs and two casting dams per gel tray. Supplied with highly flexible cable and connectors which are CE compliant, providing complete electrical isolation and safety. They have a special manufactured safety cover, which completely covers the tank of the system, making it one of the safest available.
TGT6XMINI Teaching Gel Tank
Login to see pricesBrand:
Cleaver Scientific
These industry standard tanks come in three sizes -to run six gels, four gels or a single gel. The gel trays are UV transparent and measure 7x7cm, each tank comes with two combs and two casting dams per gel tray. Supplied with highly flexible cable and connectors which are CE compliant, providing complete electrical isolation and safety. They have a special manufactured safety cover, which completely covers the tank of the system, making it one of the safest available.
TGT8XMINI Teaching Gel Tank
Login to see pricesBrand:
Cleaver Scientific
These industry standard tanks come in four sizes -to run eight, six, four or a single gel. The gel trays are UV transparent and measure 7x7cm, each tank comes with two combs and two casting dams per gel tray. Supplied with highly flexible cable and connectors which are CE compliant, providing complete electrical isolation and safety. They have a special manufactured safety cover, which completely covers the tank of the system, making it one of the safest available.
TheraPEAK™ MSCGM™ CD Serum-free Mesenchymal Stem Cell Growth Medium BulletKit™
Login to see pricesBrand:
Lonza
** This product has been discontinued.
Description
Stem cells possess the unique ability to proliferate as an undifferentiated cell type, then, when properly stimulated, differentiate into multiple lineages of cells. Lonza’s TheraPEAK™ MSCGM-CD™ Chemically Defined Mesenchymal Stem Cell Medium is a chemically defined, serum-free, xeno-free media designed to proliferate human bone marrow derived mesenchymal cells in an undifferentiated state. The medium has been specifically designed and tested to ensure that the medium neither promotes spontaneous differentiation of cells nor inhibits cell differentiation to osteogenic, chondrogenic, or adipogenic lineages (when properly stimulated with an appropriate differentiation media). Serum-free media, such as TheraPEAK™ MSCGM-CD™ Chemically Defined Mesenchymal Stem Cell Medium, are intended to support cell growth without serum supplementation. This medium is chemically defined indicating that it contain only constituents of known molecular structure. Lonza’s TheraPEAK™ MSCGM-CD™ Chemically Defined Mesenchymal Stem Cell Medium is of primary interest to those seeking maximal control over research and manufacturing variables. TheraPEAK™ MSCGM-CD™ Chemically Defined Mesenchymal Stem Cell Medium’s formulation is complete and contains human albumin, recombinant human insulin, pasteurized human transferrin, HEPES, and L-glutamine. TheraPEAK™ MSCGM-CD™ Chemically Defined Mesenchymal Stem Cell Medium does not contain phenol red or antibiotics. The basal medium (MSCBM-CD Mesenchymal Basal Medium, Chemically defined; catalog no.00190620) and the necessary supplements (MSCGM-CD™ SingleQuotsTMKit ; catalog no. 00192125) are included in this BulletKit.
Thermo ScientificTM OxoidTM Brilliance Listeria Agar (ISO) Selective Supplement
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
A selective supplement for the detection, enumeration and presumptive identification of Listeria
monocytogenes and other Listeria species from food, animal feed and environmental samples
according to ISO 11290-1:2017 and ISO 11290-2:2017 standards and other national reference
methods using the Ottaviani & Agosti formulation.
Brilliance Listeria Agar (ISO) Selective Supplement, Oxoid Composition
Typical Formula |
SR0257E |
per litre
|
Nalidixic acid sodium salt |
10.0 mg |
20.0 mg
|
Polymyxin B sulphate |
38350 IU |
76700 IU
|
Ceftazidime |
10.0mg |
20.0mg |
Amphotericin |
5.0mg |
10.0mg |
Brilliance Listeria Agar (ISO) Selective Supplement, Oxoid Directions:
Aseptically add 1 vial warmed to 48°C to 480ml of sterile Brilliance™ Listeria Agar base (ISO) (CM1212) prepared as directed, cooled to 48°C and add 1 vial of Brilliance™ Listeria Selective Supplement (SR0257E) reconstituted as directed. Mix well and pour into sterile Petri dishes.
Storage conditions and Shelf life
Store the selective (SR0257) supplements at 2-8°C away from light. Ensure all product is used before the expiry date.
Thermo ScientificTM OxoidTM BrillianceTM Listeria Agar (ISO) Base
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
Isolate, enumerate and presumptively identify Listeria species and L. monocytogenes from food and environmental samples with the Thermo Scientific™ Oxoid™ Brilliance™ Listeria Agar (ISO) (Dehydrated culture medium and supplements) following broth enrichment. The medium identifies Listeria species based on their utilization of X-glucoside giving rise to blue-green colonies. Listeria monocytogenes are further differentiated by their ability to highly produce lecithinase, producing an opaque, white halo around the colony.
Brilliance Listeria Agar (ISO), Oxoid Composition
Typical Formula * |
gm/litre
|
Enzymatic digest of animal tissues |
18.0 |
Enzymatic digest of casein |
6.0 |
Yeast extract |
10.0 |
Sodium pyruvate |
2.0 |
Glucose |
2.0 |
Magnesium glycerophosphate |
1.0 |
Magnesium sulphate (anhydrous) |
0.5 |
Sodium chloride |
5.0 |
Lithium chloride |
10.0 |
Di-sodium hydrogen phosphate (anhydrous) |
2.5 |
5-Bromo-4-chloro-3-indolyl-β-D-glucopyranoside |
0.05 |
Agar |
12.0 |
pH 7.4 ± 0.2 @ 25°C |
Brilliance Listeria Agar (ISO), Oxoid Preparation:
Suspend 34.5g in 480ml of distilled water. Mix well and sterilize by autoclaving at 121°C for 15 minutes. Cool to 48°C. Aseptically add the contents of 1 vial of Brilliance™ Listeria Selective Supplement (ISO) (SR0257E) reconstituted as directed, and 1 vial of Brilliance™ Listeria Differential Supplement (ISO) (SR0258E) warmed to 48°C. Mix well and pour into sterile Petri dishes.
Storage conditions and Shelf life
Store the dehydrated medium (CM1212B) at 10-30°C away from light and ensure bottles are correctly sealed after use.
Store prepared medium for up to 2 weeks at 2-8°C, away from light. Ensure all media is used before the expiry date on the label
Thermo ScientificTM OxoidTM BrillianceTM Listeria Agar (ISO) Differential Supplement
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
A differential supplement for the detection, enumeration, and presumptive identification of Listeria monocytogenes and other Listeria species from food, animal feed and environmental samples according to ISO 11290-1:2017 and ISO 11290-2:2017 standards and other national reference methods using the Ottaviani & Agosti formulation.
Brilliance Listeria Agar (ISO) Differential Supplement, Oxoid Composition
Typical Formula |
SR0258E |
per litre
|
L-α-phosphatidylinositol solution |
15.0ml |
30.0ml
|
Brilliance Listeria Agar (ISO) Differential Supplement, Oxoid Directions:
Aseptically add 5ml of sterile distilled water to 1 vial and mix gently to dissolve. Aseptically add the vial contents to 480ml of sterile Brilliance™ Listeria Agar base (ISO) (CM1212) prepared as directed, cooled to 48°C and add 1 vial of Brilliance™ Listeria Differential Supplement (SR0258E) warmed to 48°C. Mix well and pour into sterile Petri dishes.
Storage conditions and Shelf life
Store the differential supplements (SR0258) at 2-8°C away from light. Do not freeze the differential supplement solution. Ensure all product is used before the expiry date.
Thermo ScientificTM OxoidTM Egg Yolk Emulsion
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
A stabilised emulsion of egg yolk for use in culture media. It may be added directly to nutrient media for the identification of Clostridium, Bacillus and Staphylococcus species by their lipase activity.
Egg Yolk Emulsion, Oxoid Directions:
Suspend 21.5g of MYP Agar (CM0929) in 450ml of distilled water and bring gently to the boil to
dissolve. Sterilize by autoclaving at 121°C for 15 minutes. Cool to approximately 50°C and
aseptically add 50ml of Egg Yolk Emulsion (SR0047C) and the contents of one vial of Polymyxin B
Supplement (SR0099E) reconstituted as directed. Mix well and pour into sterile Petri dishes.
Alternatively, suspend 8g of Blood Agar Base (CM0055) in 200ml of distilled water and add 2g of
sodium chloride. Sterilize by autoclaving at 121°C for 15 minutes. Cool to approximately 50°C and
aseptically add 20ml Egg Yolk Emulsion (SR0047C). Mix well and pour into sterile Petri dishes.
Storage conditions and Shelf life
Keep at temperatures between 2° and 8 °C. Use before expiry date on the label.
Precautions
On this medium Bacillus cereus is indistinguishable from Bacillus thuringiensis.
Identify Bacillus cereus by colony form, colour, egg yolk hydrolysis and confirm with cell and spore morphology.
Occasional strains of Bacillus cereus show weak or negative egg yolk reactions.
Thermocycler
Login to see pricesBrand:
Biologix
This item is not available at the moment. Please contact us for more information.
Thermocyclers are widely used in molecular biology, clinical diagnosis, criminal investigation, and infectious disease research, among other fields. They are essential laboratory equipment for researchers who run polymerase chain reactions (PCR) for sequencing, cloning, genotyping, mutagenesis, and many other applications.
Features
• Excellent temperature control system
• Fast heating and cooling rate
• Consistent and uniform sealing across entire heating block
• Intuitive touch-screen user interface
Please contact us for pricing and availability.