Microbiology

Thermo Scientific™ Oxoid Mannitol Selenite Broth Base is a modification of Selenite F Broth for the selective enrichment of salmonellae.

Mannitol Selenite Broth Base, Oxoid Composition

Mannitol Selenite Broth, Oxoid Preparation:
Add 19g to 1 litre of distilled water to which 4g of sodium biselenite LP0121 has been added.
Warm to dissolve, mix well and fill out into containers. Sterilise in a boiling water bath, or in free flowing steam, for 10 minutes.
DO NOT AUTOCLAVE.

To minimise any possible risk of teratogenicity to laboratory workers, the sodium biselenite must be added to this medium separately.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C away from light.

Achieve maximum recovery of microorganisms during dilution with this protective, isotonic Thermo Scientific™ Oxoid™ Maximum Recovery Diluent (Dehydrated).

Maximum Recovery Diluent combines the protective effect of peptone in the diluting solution1 with the osmotic support of physiological saline. The low peptone concentration in the diluent reduces organism multiplication in the sample for at least 45 minutes during the dilution stage.

Maximum Recovery Diluent, Oxoid Composition

Maximum Recovery Diluent, Oxoid Preparation:
Dissolve 9.5g in 1 litre of distilled water. Dispense into the final containers and sterilise by autoclaving at 121°C for 15 minutes.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at room temperature.

Oxoid Membrane Lauryl Sulphate Broth is a direct replacement for Membrane Enriched Teepol Broth.

Membrane Lauryl Sulphate Broth, Oxoid Composition

Membrane Lauryl Sulphate Broth, Oxoid Preparation:
Dissolve 76.2 grams in 1 litre of distilled water. Distribute into final containers, e.g. 100 ml screw cap bottles. Sterilise by steaming for 30 minutes on three consecutive days or by autoclaving at 121°C for 15 minutes.

Storage conditions and Shelf life
Store the dehydrated medium below 25°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.

Oxoid Meropenem Selective Supplement (1mg/vial) is used for the isolation of Vancomycin-Resistant Enterococci (VRE) and HighLevel Aminoglycoside-Resistant Enterococci (HLARE) from clinical specimens.

• Add to VRE Agar Base, Part No. CM0984B
• Each vial supplements 500mL of medium

Meropenem Selective Supplement, Oxoid Composition

Storage conditions and Shelf life
Meropenem Supplement SR0184 should be stored in the dark at 2-8°C.
Prepared medium may be stored for up to two weeks at 2-8°C in the dark.

Oxoid Milk Agar, Oxoid is for use in the dairy industry.

Milk Agar, Oxoid Composition

Milk Agar, Oxoid Preparation:
Suspend 24g in 1 litre of distilled water. Bring to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.

Identify members of the coliform group of bacteria in food and water samples with Thermo Scientific™ Oxoid™ Minerals Modified Glutamate Medium (Dehydrated). The mineral content of the medium allows for the superior cultivation and enumeration of coliforms.

Minerals Modified Glutamate Medium, Oxoid Composition

Minerals Modified Glutamate Medium, Oxoid Preparation:
Double Strength:
Dissolve 5g of ammonium chloride in 1 litre of distilled water. To this add 22.7g of Minerals Modified Medium Base, and 12.7g of Sodium glutamate LP0124. Mix to dissolve completely. Sterilise by autoclaving for 10 minutes at 116°C; alternatively heat to 100°C for 30 minutes on three successive days.

Single strength:
Dissolve 2.5g of ammonium chloride in 1 litre of distilled water. To this add 11.4g of Minerals Modified Medium Base, and 6.4g of Sodium glutamate LP0124. Mix to dissolve completely. Sterilise by autoclaving for 10 minutes at 116°C; alternatively heat to 100°C for 30 minutes on three successive days.

Note
To improve the stability of the dehydrated medium on storage the sodium glutamate LP0124 is supplied separately and must be added to the basal medium CM0607.

The pH of the final medium is critical for optimum performance and the sterilised broth should be checked to confirm that it is at pH 6.7 before use.

Differences in heating procedures cause differences in final pH value. If necessary the heating procedure should be adjusted so that the final pH, after sterilisation is 6.7

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.

Precautions
Presumptive positive tubes must be sub-cultured to Lauryl Tryptose Mannitol Broth CM0831 and incubated at 44°C to detect indole formation at this temperature before the identification of Escherichia coli can be made.

Selectively isolate Salmonella species from food samples with Thermo Scientific™ Muller-Kauffmann Tetrathionate-Novobiocin Broth (MkTTn) for food testing in compliance with ISO 6579:2002.

Muller-Kauffmann Tetrathionate-Novobiocin Broth (MkTTn), Oxoid Composition

Muller-Kauffmann Tetrathionate-Novobiocin Broth (MkTTn), Oxoid Preparation:
Suspend 89.5g of MKTTn in 1 litre of distilled water, mix well and bring to the boil. Cool to below 45°C. Immediately before use add 20ml of iodine-iodide solution prepared by dissolving 25g of potassium iodide in 10ml of water, adding 20g of iodine and then diluting to 100ml with sterile water. Also add the contents of four vials of Oxoid Novobiocin Selective Supplement SR0181 reconstituted as directed. Mix well and aseptically dispense into sterile containers.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared media at room temperature. The prepared medium in its final form containing iodine/iodide solution + Novobiocin Selective Supplement SR0181 should be used immediately.