RapID CB PLUS System 20/KT
RM857.00Brand:
Thermo Scientific™ Remel™
Identify Corynebacterium and other gram-positive coryneform bacilli in just four hours using the Thermo Scientific™ RapID™ CB PLUS System, an identification system based on enzyme technology.
Requires:
RapID Spot Indole, Part No. R8309002, and RapID Inoculation Fluid, Part No. R8325102
RapID Inoculation Fluid – 1ml PK/20Tube
RM80.00Brand:
Thermo Scientific™ Remel™
Save time preparing diluents for Thermo Scientific™ RapID™ System using Thermo Scientific RapID 1 mL Inoculation Fluid.
This product is for use with RapID NH System (R8311001), RapID ANA II System (R8311002), RapID STR System (R8311003), RapID SS/u System (R8311004) and RapID NF PLUS System (R8311005).
RapID Inoculation Fluid – 2ml PK/20Tube
RM79.00Brand:
Thermo Scientific™ Remel™
Save time preparing diluents for Thermo Scientific™ RapID™ System using Thermo Scientific RapID 2 mL Inoculation Fluid.
This product is for use with RapID ONE System (R8311006), RapID YEAST PLUS System (R8311007), RapID STR System (R8311003), RapID CB PLUS System (R8311008) and RapID STAPH PLUS System (R8311009).
RapID NF PLUS System 20/KT
RM538.00Brand:
Thermo Scientific™ Remel™
Identify over 70 medically important, oxidase-positive, gram-negative bacilli, including Vibrio spp. in just four hours using the Thermo Scientific™ RapID™ NF PLUS System, an identification system based on enzyme technology.
Requires:
RapID Spot Indole, Part No. R8309002; RapID Nitrate A Part No. R8309003; RapID Nitrate B, Part No. R8309004; RapID Inoculation Fluid, Part No. R8325106
RapID NH System KT/20
RM455.00Brand:
Thermo Scientific™ Remel™
Identify over 30 taxa including Neisseria, Moraxella, Haemophilus, and related microorganisms in just four hours using the Thermo Scientific™ RapID™ NH System, an identification system based on enzyme technology.
Requires:
RapID Spot Indole, Part No. R8309002; RapID Nitrate A, Part No. R8309003; RapID Nitrate B Part No. R8309004; RapID Inoculation Fluid, Part No.R8325106
RapID Nitrate A Reagent 15ml/VL
RM191.00Brand:
Thermo Scientific™ Remel™
- Complete the Thermo Scientific™ RapID™ System Nitrite test using the Thermo Scientific RapID Nitrate A Reagent.
- This product is for use with RapID CB PLUS System (R8311008), RapID NF PLUS System (R8311005), RapID ONE System (R8309002), RapID NH System (R8311001), RapID STAPH PLUS System (R8309003) and RapID NH System (R8311001).
RapID Nitrate B Reagent 15ml/VL
RM190.00Brand:
Thermo Scientific™ Remel™
- Complete the Thermo Scientific™ RapID™ System Nitrite test using the Thermo Scientific RapID Nitrate B Reagent.
- This product is for use with RapID CB PLUS System (R8311008), RapID NF PLUS System (R8311005), RapID ONE System (R8309002), RapID NH System (R8311001), RapID STAPH PLUS System (R8309003) and RapID NH System (R8311001).
RapID ONE System 20/KT
RM406.00Brand:
Thermo Scientific™ Remel™
Identify over 70 medically important, oxidase-negative, gram-negative bacilli is just four hours using the Thermo Scientific™ RapID™ ONE System, an identification system based on enzyme technology.
Requires:
RapID Spot Indole (R8309002) and RapID Inoculation Fluid (R8325102).
RapID Spot Indole Reagent 15ml/VL
RM216.00Brand:
Thermo Scientific™ Remel™
- Complete the Thermo Scientific™ RapID™ System Indole test using the Thermo Scientific RapID Spot Indole Reagent.
- This product is for use with RapID SS/u System (R8311004), RapID ANA II System (R8311002), RapID NF PLUS System (R8311005), RapID ONE System (R8309002), RapID NH System (R8311001).
RapID SS/u System KT/20
RM596.00Brand:
Thermo Scientific™ Remel™
Identify commonly isolated urinary tract pathogens in just two hours using the Thermo Scientific™ RapID™ SS/u System, an identification system based on enzyme technology.
Requires:
RapID Spot Indole (R8309002) and RapID Inoculation Fluid (R8325102).
RapID STAPH PLUS System 20/KT
RM1,736.00Brand:
Thermo Scientific™ Remel™
Identify 40 different staphylococci and related genera in just four hours using the Thermo Scientific™ RapID™ STAPH PLUS System, an identification system based on enzyme technology.
Requires:
Requires RapID Nitrate A, Part No. R8309003; RapID Nitrate B, Part No. R8309004; RapID Inoculation Fluid, Part No. R8325106.
RapID STR System KT/20
RM599.00Brand:
Thermo Scientific™ Remel™
Identify streptococci and related genera in just four hours using the Thermo Scientific™ RapID™ STR System, an identification system based on enzyme technology.
Requires:
RapID Inoculation Fluid (R8325102).
RapID YEAST PLUS System KT/20TST
RM798.00Brand:
Thermo Scientific™ Remel™
Identify over 40 different yeasts in just four hours using the Thermo Scientific™ RapID™ YEAST PLUS System, an identification system based on enzyme technology.
Requires:
RapID Inoculation Fluid (R8325106)
Rappaport Vassiliadis Soy Peptone 500g
RM363.00Brand:
Thermo ScientificTM OxoidTM
Selectively enrich Salmonella spp. from food and environmental specimens with Thermo Scientific™ Oxoid™ Rappaport-Vassiliadis Soya Peptone Broth (Dehydrated). Rappaport- Vassiliadis Soya Peptone Broth selects for Salmonella species by exploiting their characteristics when compared with other Enterobacteriaceae, such as the ability to survive at relatively high osmotic pressure, multiply at relatively low pH values, be relatively more resistant to malachite green, and have relatively less demanding nutritional requirements.
Rappaport-Vassiliadis Soya Peptone Broth (Dehydrated), Oxoid Composition
| Typical Formula* | gm/litre |
| Soya peptone | 4.5 |
| Sodium chloride | 7.2 |
| Potassium dihydrogen phosphate | 1.26 |
| Di-potassium hydrogen phosphate | 0.18 |
| Magnesium chloride (anhydrous) | 13.58 |
| Malachite green | 0.036 |
| pH 5.2 ± 0.2 @ 25°C |
Rappaport-Vassiliadis Soya Peptone Broth (Dehydrated), Oxoid Preparation:
Suspend 26.75g in 1 litre of distilled water and heat gently to dissolve. Dispense 10ml volumes into screw-capped bottles or tubes and sterilise by autoclaving at 115°C for 15 minutes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
Precautions
RVS Broth should not be used if Salmonella Typhi is suspected.
In order to achieve optimum recovery it is recommended that the enrichment broth is incubated at 42 ± 1°C.
Rappaport-Vassiliadis (RV) Broth 500g
RM309.00Brand:
Thermo ScientificTM OxoidTM
Selectively enrich Salmonella spp. from food and environmental specimens with Thermo Scientific™ Oxoid™ Rappaport-Vassiliadis Enrichment Broth (Dehydrated). Rappaport-Vassiliadis Enrichment Broth selects for Salmonella species by exploiting their characteristics when compared with other Enterobacteriaceae, such as the ability to survive at relatively high osmotic pressure, multiply at relatively low pH values, be relatively more resistant to malachite green, and have relatively less demanding nutritional requirements.
Rappaport-Vassiliadis Enrichment Broth (Dehydrated), Oxoid Composition
| Typical Formula* (Classical) | gm/litre |
| Soya peptone | 5.0 |
| Sodium chloride | 8.0 |
| Potassium dihydrogen phosphate | 1.6 |
| Magnesium chloride 6H2O | 40.0 |
| Malachite green | 0.04 |
| pH 5.2 ± 0.2 @ 25°C |
THIS MEDIUM IS VERY HYGROSCOPIC AND MUST BE PROTECTED FROM MOISTURE.
The quantities given for the formula as classically described made 1110ml of medium. They have been published this way in the Oxoid literature to coincide with the scientific literature.
The directions for reconstituting Oxoid Rappaport-Vassiliadis (RV) Enrichment Broth follow usual Oxoid practice and specify the weight needed for 1 litre of medium.
Rappaport-Vassiliadis Enrichment Broth (Dehydrated), Oxoid Preparation:
Add 30g (the equivalent weight of dehydrated medium per litre) to 1 litre of distilled water. Heat gently until dissolved completely. Dispense 10ml volumes into screw-capped bottles or tubes and sterilise by autoclaving at 115°C for 15 minutes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
Precautions
RV Broth should not be used if Salmonella typhi is suspected.
Note the difference in weight between the classical formula on the label and the reduced weight per litre, using anhydrous magnesium chloride.
Rd2 Rifampcin
RM0.00Brand:
Thermo ScientificTM OxoidTM
Rd30 Rifampcin
RM0.00Brand:
Thermo ScientificTM OxoidTM
Rd5 Rifampcin
RM80.00Brand:
Thermo ScientificTM OxoidTM
Ready-to-Cast Si Anode Slurry for Lithium ion battery, 1-micron silicon particles – Sigma-Aldrich
RM1,041.00Brand:
Sigma-Aldrich
Synonyms
Ready-to-Cast Si Anode Slurry for Lithium ion battery, Silicon anode slurry
General Description
Our ready-to-cast silicon anode slurry is a liquid-type dispersion, composed of high-purity 1-micron sized silicon particles, conductive additives, binder (poly(acrylic acid)), and water. The product features a high silicon loading content and excellent stability, ensuring superior performance and uniformity in battery fabrication.
Application
Our ready-to-cast silicon anode slurry is specifically designed to enable the production of high-performance silicon anodes for lithium-ion batteries. The slurry can be easily coated onto copper foil current collectors using blade-coating or slot-die coating techniques. Due to the precise formulation of our slurry, it is stable and processable, ensuring uniform and defect-free films of silicon anode material.The high silicon loading content and excellent stability of our ready-to-cast silicon anode slurry result in superior battery performance. Researchers can readily use our slurry to optimize their lithium-ion battery fabrication process, resulting in high-performance batteries suitable for a variety of applications.
Ready-to-Cast Slurry of MCMB (MesoCarbon MicroBeads) Graphite Powder for Lithium ion battery – Sigma-Aldrich
RM2,441.00Brand:
Sigma-Aldrich
Synonyms
Blade coatable ink slurry for Lithium ion battery
Applications
The liquid-type dispersion is made up of a common active material, a conductive agent, a binder and a solvent that researchers can readily use for processing lithium-ion battery electrodes.
ReBlot Plus Antibody Stripping Solution, 10x
RM784.00Brand:
Merck
Description
ReBlot™ Plus reagents efficiently strip probed blots of
bound antibodies. ReBlot™ Plus reagents are available
in two formulations, “Mild” and “Strong”.
• Re-Blot™ Plus Mild Stripping Solution – Provides
good results on both nitrocellulose and PVDF
membranes.
• Re-Blot™ Plus Strong Stripping Solution –
Performs when membranes with high signal are
to be stripped, or use when Re-Blot™ Plus Mild
treatment is not sufficient.
Key Benefits
• β-Mercaptoethanol-free to avoid pungent smells
• Room temperature stripping in only 15 minutes
• Fast reuse of blots for multiple antibody probings
• Non-acidic, for less risk of protein degradation
(such as in Edman degradation)
Recombinant Albumin, Molecular Biology Grade
RM285.00Brand:
New England Biolabs
Recombinant Albumin (rAlbumin), Molecular Biology Grade, is a non-bovine derived albumin that can serve as an alternative to Bovine Serum Albumin (BSA). Like BSA, it has been shown to prevent adhesion of enzymes to reaction tubes and pipette surfaces. It also stabilizes some proteins during incubation. Choose Recombinant Albumin, when there is a need to avoid BSA.
Reinforced Clostridial Agar 500g
RM572.00Brand:
Thermo ScientificTM OxoidTM
Cultivate and enumerate anaerobes, especially Clostridium species, with Thermo Scientific™ Oxoid™ Reinforced Clostridial Agar (RC Agar) (Dehydrated). A solid, highly nutritious medium, it can be used as an enrichment medium to optimize the growth of clostridia and other anaerobes, lactobacilli, and many other species of bacteria.
Reinforced Clostridial Agar (RC Agar) (Dehydrated), Oxoid Composition
| Typical Formula* | gm/litre |
| Yeast extract | 3.0 |
| `Lab-Lemco’ powder | 10.0 |
| Peptone | 10.0 |
| Glucose | 5.0 |
| Soluble starch | 1.0 |
| Sodium chloride | 5.0 |
| Sodium acetate | 3.0 |
| Cysteine hydrochloride | 0.5 |
| Agar | 15.0 |
| pH 6.8 ± 0.2 @ 25°C |
Reinforced Clostridial Agar (RC Agar) (Dehydrated), Oxoid Preparation:
Suspend 52.5g in 1 litre of distilled water. Bring to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
Precautions
Further identification tests must be carried out on organisms isolated from this medium.
Reinforced Clostridial Medium 500g
RM520.00Brand:
Thermo ScientificTM OxoidTM
Cultivate and enumerate clostridia and other anaerobes occurring in food and pathological samples with Thermo Scientific™ Oxoid™ Reinforced Clostridial Medium. A semi-solid, highly nutritious medium can be used as an enrichment medium to optimize the growth of clostridia before sub-culturing to solid agar.
Reinforced Clostridial Medium, Oxoid Composition
| Typical Formula* | gm/litre |
| Yeast extract | 13.0 |
| Peptone | 10.0 |
| Glucose | 5.0 |
| Soluble starch | 1.0 |
| Sodium chloride | 5.0 |
| Sodium acetate | 3.0 |
| Cysteine hydrochloride | 0.5 |
| Agar | 0.5 |
| pH 6.8 ± 0.2 |
Reinforced Clostridial Medium, Oxoid Preparation:
Suspend 38 g in 1 litre of distilled water. Bring to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.


