Shop

Oxoid Kanamycin Sulphate Supplement (10mg/vial) is added to Kanamycin Esculin Azide Agar Base, Part No. CM0591B.

Kanamycin Sulphate Supplement, Oxoid Composition

Kanamycin Aesculin Azide Agar, Oxoid Preparation:
Add 2ml of sterile distilled water to one vial and mix gently to dissolve completely. Add the contents to 500ml of Kanamycin Aesculin Azide Agar Base.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared media at 2-8°C.

• Oxoid Campylobacter Karmaili Agar Base is a blood-free selective medium for the isolation of Campylobacter jejuni and Campylobacter coli when incubated at 42°C.
• Also available Campylobacter Selective Supplement (Karmaili), Part No. SR0167E and Modified Karma-i-li Selective Supplement, Part No. SR0205E.

Campylobacter Karmaili Agar Base, Oxoid Composition

Campylobacter Agar (Karmali), Oxoid Preparation:
Add 21.5g of Campylobacter Agar Base (Karmali) to 500ml of distilled water and bring to the boil to dissolve. Sterilise by autoclaving at 121°C for 15 minutes. Cool to 50°C. Aseptically add 1 vial of Campylobacter Selective Supplement (Karmali) SR0167 or Modified Karmali Selective Supplement SR0205, reconstituted as directed.. Mix well and pour into sterile Petri dishes.

Storage conditions and Shelf life
Campylobacter Agar Base (Karmali) should be stored tightly capped in the original container in a cool, dry place away from bright light. When stored at 10-30°C the medium will remain stable until the expiry date printed on the label.

Oxoid Kligler Iron Agar is used for differential identificaton of Enterobacteriaceae.

Kligler Iron Agar, Oxoid Composition

Kligler Iron Agar, Oxoid Preparation:
Suspend 55g in 1 litre of distilled water. Bring to the boil to dissolve completely. Mix well and distribute into containers. Sterilise by autoclaving at 121°C for 15 minutes. Allow to set as slopes with 1 inch butts.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.

Precautions
It is essential that Kligler Iron Agar is examined and reported at 18-24 hours. Early or late readings will give false results.
KIA will grow both oxidative and fermentative organisms. Confusion will result if care is not taken to distinguish between the two groups.
Always use a straight wire to inoculate the butt, to avoid splitting the agar with a loop.
Pure cultures are essential to avoid misinterpretation.
Do not use screw-capped tubes or bottles for KIA medium. It is essential that air is freely available to growth on the slant.

Oxoid Lab-Lemco Broth is a nutrient medium equivalent to USA nutrient extract formulations.

Lab-Lemco Broth, Oxoid Composition

Lab-Lemco Broth, Oxoid Preparation:
Dissolve 8g in 1 litre of distilled water and distribute into final containers. Sterilise by autoclaving at 121°C for 15 minutes.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at room temperature.
`Lab-Lemco’ Broth is slightly more alkaline than the medium used in the APHA publications (pH 6.8).

Thermo Scientific™ Oxoid Lab-Lemco Powder is a Beef Extract made from specially selected raw materials.

• May be used in fermentation processes
• Industrial Reference: NMKL

Oxoid Lactalbumin Hydrolysate is a pancreatic digest of lactalbumin which contains high levels of essential amino acids.

Thermo Scientific™ Oxoid Lactic Acid is a solution for addition to culture media, primarily to lower the pH.

Thermo Scientific™ Oxoid Lactic Acid is a solution for addition to culture media, primarily to lower the pH.

Oxoid Lactose Bacteriological is a sugar suitable for inclusion in bacteriological culture media.

Presumptively identify coliform organisms in milk, water and foods as specified by the American Public Health Association with Thermo Scientific™ Oxoid™ Lactose Broth (Dehydrated). Beef extracts and peptone in this liquid medium supply essential nutrients while lactose is a fermentable carbohydrate for coliforms. Coliforms ferment lactose in the medium resulting in gas formation which is indicative of positive results.

Lactose Broth, Oxoid Composition

Lactose Broth, Oxoid Preparation:
Dissolve 13g in 1 litre of distilled water and distribute into containers with fermentation tubes (Durham). Sterilise by autoclaving at 121°C for 15 minutes.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at room temperature (18-22°C).

Precautions
Ensure that the fermentation tubes are free from air bubbles before inoculation.
Large water samples may require double-strength lactose broth to reduce the final volumes. Do not overheat double- strength broth or inhibitory products will be produced.

Detect coliform organisms in water, waste water and dairy products with selective Thermo Scientific™ Oxoid™ Lauryl Tryptose Broth (Dehydrated), while conforming to the formula detailed by American Public Health Association. Lauryl Tryptose Broth is designed to promote a rich growth and copious gas production from small inocula of coliform organisms.

Lauryl Tryptose Broth, Oxoid Composition

Lauryl Tryptose Broth, Oxoid Preparation:
Dissolve 35.6g in 1 litre of distilled water and distribute into containers with fermentation tubes (Durham). Sterilise by autoclaving at 121°C for 15 minutes.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at room temperature.

Precautions
If stored at 2-8°C the broth will become cloudy or form a precipitate. This should clear at room temperature but gas formation is the criterion of growth not turbidity.

Oxoid Lauryl Tryptose Broth w/MUG is used for the presumptive identification of E. coli.

Lauryl Tryptose Broth with MUG, Oxoid Composition

Lauryl Tryptose Broth, Oxoid Preparation:
Suspend 35.65g of Lauryl Tryptose Broth with MUG in 1 litre of distilled water. Warm to 40°C. Mix well to dissolve and distribute into final containers holding inverted Durham tubes. (Please be aware of the special glassware requirements when using ultra-violet light.). Sterilise by autoclaving at 121° C for 15 minutes.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at room temperature.