RapID Inoculation Fluid – 1ml PK/20Tube
Login to see pricesBrand:
Thermo Scientific™ Remel™
Save time preparing diluents for Thermo Scientific™ RapID™ System using Thermo Scientific RapID 1 mL Inoculation Fluid.
This product is for use with RapID NH System (R8311001), RapID ANA II System (R8311002), RapID STR System (R8311003), RapID SS/u System (R8311004) and RapID NF PLUS System (R8311005).
RapID Inoculation Fluid – 2ml PK/20Tube
Login to see pricesBrand:
Thermo Scientific™ Remel™
Save time preparing diluents for Thermo Scientific™ RapID™ System using Thermo Scientific RapID 2 mL Inoculation Fluid.
This product is for use with RapID ONE System (R8311006), RapID YEAST PLUS System (R8311007), RapID STR System (R8311003), RapID CB PLUS System (R8311008) and RapID STAPH PLUS System (R8311009).
RapID NF PLUS System 20/KT
Login to see pricesBrand:
Thermo Scientific™ Remel™
Identify over 70 medically important, oxidase-positive, gram-negative bacilli, including Vibrio spp. in just four hours using the Thermo Scientific™ RapID™ NF PLUS System, an identification system based on enzyme technology.
Requires:
RapID Spot Indole, Part No. R8309002; RapID Nitrate A Part No. R8309003; RapID Nitrate B, Part No. R8309004; RapID Inoculation Fluid, Part No. R8325106
RapID NH System KT/20
Login to see pricesBrand:
Thermo Scientific™ Remel™
Identify over 30 taxa including Neisseria, Moraxella, Haemophilus, and related microorganisms in just four hours using the Thermo Scientific™ RapID™ NH System, an identification system based on enzyme technology.
Requires:
RapID Spot Indole, Part No. R8309002; RapID Nitrate A, Part No. R8309003; RapID Nitrate B Part No. R8309004; RapID Inoculation Fluid, Part No.R8325106
RapID Nitrate A Reagent 15ml/VL
Login to see pricesBrand:
Thermo Scientific™ Remel™
- Complete the Thermo Scientific™ RapID™ System Nitrite test using the Thermo Scientific RapID Nitrate A Reagent.
- This product is for use with RapID CB PLUS System (R8311008), RapID NF PLUS System (R8311005), RapID ONE System (R8309002), RapID NH System (R8311001), RapID STAPH PLUS System (R8309003) and RapID NH System (R8311001).
RapID Nitrate B Reagent 15ml/VL
Login to see pricesBrand:
Thermo Scientific™ Remel™
- Complete the Thermo Scientific™ RapID™ System Nitrite test using the Thermo Scientific RapID Nitrate B Reagent.
- This product is for use with RapID CB PLUS System (R8311008), RapID NF PLUS System (R8311005), RapID ONE System (R8309002), RapID NH System (R8311001), RapID STAPH PLUS System (R8309003) and RapID NH System (R8311001).
RapID ONE System 20/KT
Login to see pricesBrand:
Thermo Scientific™ Remel™
Identify over 70 medically important, oxidase-negative, gram-negative bacilli is just four hours using the Thermo Scientific™ RapID™ ONE System, an identification system based on enzyme technology.
Requires:
RapID Spot Indole (R8309002) and RapID Inoculation Fluid (R8325102).
RapID Spot Indole Reagent 15ml/VL
Login to see pricesBrand:
Thermo Scientific™ Remel™
- Complete the Thermo Scientific™ RapID™ System Indole test using the Thermo Scientific RapID Spot Indole Reagent.
- This product is for use with RapID SS/u System (R8311004), RapID ANA II System (R8311002), RapID NF PLUS System (R8311005), RapID ONE System (R8309002), RapID NH System (R8311001).
RapID SS/u System KT/20
Login to see pricesBrand:
Thermo Scientific™ Remel™
Identify commonly isolated urinary tract pathogens in just two hours using the Thermo Scientific™ RapID™ SS/u System, an identification system based on enzyme technology.
Requires:
RapID Spot Indole (R8309002) and RapID Inoculation Fluid (R8325102).
RapID STAPH PLUS System 20/KT
Login to see pricesBrand:
Thermo Scientific™ Remel™
Identify 40 different staphylococci and related genera in just four hours using the Thermo Scientific™ RapID™ STAPH PLUS System, an identification system based on enzyme technology.
Requires:
Requires RapID Nitrate A, Part No. R8309003; RapID Nitrate B, Part No. R8309004; RapID Inoculation Fluid, Part No. R8325106.
RapID STR System KT/20
Login to see pricesBrand:
Thermo Scientific™ Remel™
Identify streptococci and related genera in just four hours using the Thermo Scientific™ RapID™ STR System, an identification system based on enzyme technology.
Requires:
RapID Inoculation Fluid (R8325102).
RapID YEAST PLUS System KT/20TST
Login to see pricesBrand:
Thermo Scientific™ Remel™
Identify over 40 different yeasts in just four hours using the Thermo Scientific™ RapID™ YEAST PLUS System, an identification system based on enzyme technology.
Requires:
RapID Inoculation Fluid (R8325106)
Rappaport Vassiliadis Soy Peptone 500g
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
Selectively enrich Salmonella spp. from food and environmental specimens with Thermo Scientific™ Oxoid™ Rappaport-Vassiliadis Soya Peptone Broth (Dehydrated). Rappaport- Vassiliadis Soya Peptone Broth selects for Salmonella species by exploiting their characteristics when compared with other Enterobacteriaceae, such as the ability to survive at relatively high osmotic pressure, multiply at relatively low pH values, be relatively more resistant to malachite green, and have relatively less demanding nutritional requirements.
Rappaport-Vassiliadis Soya Peptone Broth (Dehydrated), Oxoid Composition
Typical Formula* |
gm/litre |
Soya peptone |
4.5 |
Sodium chloride |
7.2 |
Potassium dihydrogen phosphate |
1.26 |
Di-potassium hydrogen phosphate |
0.18 |
Magnesium chloride (anhydrous) |
13.58 |
Malachite green |
0.036 |
pH 5.2 ± 0.2 @ 25°C |
Rappaport-Vassiliadis Soya Peptone Broth (Dehydrated), Oxoid Preparation:
Suspend 26.75g in 1 litre of distilled water and heat gently to dissolve. Dispense 10ml volumes into screw-capped bottles or tubes and sterilise by autoclaving at 115°C for 15 minutes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
Precautions
RVS Broth should not be used if Salmonella Typhi is suspected.
In order to achieve optimum recovery it is recommended that the enrichment broth is incubated at 42 ± 1°C.
Rappaport-Vassiliadis (RV) Broth 500g
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
Selectively enrich Salmonella spp. from food and environmental specimens with Thermo Scientific™ Oxoid™ Rappaport-Vassiliadis Enrichment Broth (Dehydrated). Rappaport-Vassiliadis Enrichment Broth selects for Salmonella species by exploiting their characteristics when compared with other Enterobacteriaceae, such as the ability to survive at relatively high osmotic pressure, multiply at relatively low pH values, be relatively more resistant to malachite green, and have relatively less demanding nutritional requirements.
Rappaport-Vassiliadis Enrichment Broth (Dehydrated), Oxoid Composition
Typical Formula* (Classical) |
gm/litre |
Soya peptone |
5.0 |
Sodium chloride |
8.0 |
Potassium dihydrogen phosphate |
1.6 |
Magnesium chloride 6H2O |
40.0 |
Malachite green |
0.04 |
pH 5.2 ± 0.2 @ 25°C |
THIS MEDIUM IS VERY HYGROSCOPIC AND MUST BE PROTECTED FROM MOISTURE.
The quantities given for the formula as classically described made 1110ml of medium. They have been published this way in the Oxoid literature to coincide with the scientific literature.
The directions for reconstituting Oxoid Rappaport-Vassiliadis (RV) Enrichment Broth follow usual Oxoid practice and specify the weight needed for 1 litre of medium.
Rappaport-Vassiliadis Enrichment Broth (Dehydrated), Oxoid Preparation:
Add 30g (the equivalent weight of dehydrated medium per litre) to 1 litre of distilled water. Heat gently until dissolved completely. Dispense 10ml volumes into screw-capped bottles or tubes and sterilise by autoclaving at 115°C for 15 minutes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
Precautions
RV Broth should not be used if Salmonella typhi is suspected.
Note the difference in weight between the classical formula on the label and the reduced weight per litre, using anhydrous magnesium chloride.
Rd2 Rifampcin
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
Rd30 Rifampcin
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
Rd5 Rifampcin
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
ReBlot Plus Antibody Stripping Solution, 10x
Login to see pricesBrand:
Merck
Description
ReBlot™ Plus reagents efficiently strip probed blots of
bound antibodies. ReBlot™ Plus reagents are available
in two formulations, “Mild” and “Strong”.
• Re-Blot™ Plus Mild Stripping Solution – Provides
good results on both nitrocellulose and PVDF
membranes.
• Re-Blot™ Plus Strong Stripping Solution –
Performs when membranes with high signal are
to be stripped, or use when Re-Blot™ Plus Mild
treatment is not sufficient.
Key Benefits
• β-Mercaptoethanol-free to avoid pungent smells
• Room temperature stripping in only 15 minutes
• Fast reuse of blots for multiple antibody probings
• Non-acidic, for less risk of protein degradation
(such as in Edman degradation)
Reinforced Clostridial Agar 500g
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
Cultivate and enumerate anaerobes, especially Clostridium species, with Thermo Scientific™ Oxoid™ Reinforced Clostridial Agar (RC Agar) (Dehydrated). A solid, highly nutritious medium, it can be used as an enrichment medium to optimize the growth of clostridia and other anaerobes, lactobacilli, and many other species of bacteria.
Reinforced Clostridial Agar (RC Agar) (Dehydrated), Oxoid Composition
Typical Formula* |
gm/litre |
Yeast extract |
3.0 |
`Lab-Lemco’ powder |
10.0 |
Peptone |
10.0 |
Glucose |
5.0 |
Soluble starch |
1.0 |
Sodium chloride |
5.0 |
Sodium acetate |
3.0 |
Cysteine hydrochloride |
0.5 |
Agar |
15.0 |
pH 6.8 ± 0.2 @ 25°C |
|
Reinforced Clostridial Agar (RC Agar) (Dehydrated), Oxoid Preparation:
Suspend 52.5g in 1 litre of distilled water. Bring to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
Precautions
Further identification tests must be carried out on organisms isolated from this medium.
Reinforced Clostridial Medium 500g
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
Cultivate and enumerate clostridia and other anaerobes occurring in food and pathological samples with Thermo Scientific™ Oxoid™ Reinforced Clostridial Medium. A semi-solid, highly nutritious medium can be used as an enrichment medium to optimize the growth of clostridia before sub-culturing to solid agar.
Reinforced Clostridial Medium, Oxoid Composition
Typical Formula* |
gm/litre |
Yeast extract |
13.0 |
Peptone |
10.0 |
Glucose |
5.0 |
Soluble starch |
1.0 |
Sodium chloride |
5.0 |
Sodium acetate |
3.0 |
Cysteine hydrochloride |
0.5 |
Agar |
0.5 |
pH 6.8 ± 0.2 |
Reinforced Clostridial Medium, Oxoid Preparation:
Suspend 38 g in 1 litre of distilled water. Bring to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
Ringers Solution Tablets (100’s)
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
Oxoid Ringers Solution Tablets is used for the preparation of isotonic diluents for bacterial cells and bacteriological specimens.
Each tablet prepares 500mL solution. For Laboratory Use Only.
Ringers Solution Tablets, Oxoid Composition
Formula |
gm/litre |
Sodium chloride |
2.25 |
Potassium chloride |
0.105 |
Calcium chloride 6H2O |
0.12 |
Sodium bicarbonate 0.05 |
0.05 |
pH |
One tablet makes 500 ml of quarter-strength Ringers solution.
Ringers Solution Preparation:
To prepare quarter-strength Ringers Solution, dissolve 1 tablet in 500ml of distilled water. Sterilise by autoclaving at 121°C for 15 minutes.
Rl100 Sulphamethoxazole
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
Rl25 Sulphamethoxazole
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
RNAlater® (Sigma)
Login to see pricesBrand:
Sigma
Description
Synonyms: RNA preservation solution, RNA protection solution, RNA protector, RNA stabilizer, RNA storage solution, RNA transportation solution
RNAlater® is an RNA stabilization solution that is designed to quickly permeate and stabilize RNA in tissues and cells after collection. It allows for long-term storage of samples at different temperatures, including room temperature, without compromising RNA integrity. It preserves RNA in tissues for up to 1 day at 37 °C, 1 week at 25 °C, and 1 month at 4 °C. Tissues can also be stored at -20 °C long-term.