Showing 1153–1176 of 1204 results

Show sidebar

Violet Red Bile Glucose Agar Base (ISO)

Brand:

Thermo ScientificTM OxoidTM

This item is not available at the moment. Please refer to the alternative, Violet Red Bile Glucose Agar (CM0485B). However, please note that this product does not conform to ISO.

Selectively enumerate Enterobacteriaceae in food, animal feed, and environmental samples with Thermo Scientific™ Oxoid™ Violet Red Bile Glucose (VRBG) Agar (ISO) (Dehydrated) while adhering to ISO 21528 and ISO 11133:2014. Due to the careful addition of selective inhibitory components, neutral red, crystal violet, and bile salts, the medium provides selectivity against non-target Gram-positive bacteria.

Violet Red Bile Glucose (VRBG) Agar (ISO) (Dehydrated), Oxoid Composition

Typical Formula*

gm/ litre

Enzymatic digest of animal tissues

7.0

Yeast extract

3.0

Bile salts No. 3

1.5

Sodium chloride

5.0

Neutral red

0.03

Crystal violet

0.002

Glucose

10.0

Agar

12.0

pH 7.4 ± 0.2 @ 25°C

 

Violet Red Bile Glucose (VRBG) Agar (ISO) (Dehydrated), Oxoid Preparation:
Suspend 38.5g of VRBGA (ISO) dehydrated medium in 1 litre of distilled water. Bring to the boil while mixing. Continue to boil for up to 2 minutes or for the minimum time necessary to dissolve completely. DO NOT AUTOCLAVE. Cool to 44-47°C and use within 4 hours. Mix well before pouring.

Storage conditions and Shelf life
VRBGA (ISO) should be stored in the tightly capped original container at 10-30°C. When stored as directed, the un-opened product will remain stable until the expiry date printed on the packaging.

Locally prepared VRBGA (ISO) plates can be stored for up to 2 weeks when made from CM1082 according to the manufacturer’s instructions and stored at 2-8°C, out of direct sunlight. A longer shelf life may be attainable, but should be validated under the relevant, local manufacturing and storage conditions.

Precautions
VRBGA (ISO) should be prepared, cooled to 44-47°C and used within 4 hours.

VRBGA (ISO) is for laboratory use only. Do not use the dehydrated medium beyond the stated expiry date or if the product shows any sign of deterioration.

Violet Red Bile Lactose Agar 500g

Brand:

Thermo ScientificTM OxoidTM

Detect and enumerate coliform organisms in water, food and dairy products with Thermo Scientific™ Oxoid™ Violet Red Bile Agar (Dehydrated). This lactose containing selective medium has been used for the determination of the coli-aerogenes content of water, milk and other dairy products, dairy equipment, and food products. Due to the addition of selective inhibitory components, neutral red, crystal violet, and bile salts, the medium provides selectivity against non-target Gram-positive bacteria.

Violet Red Bile Agar (Dehydrated), Oxoid Composition

Typical Formula*

gm/litre

Yeast extract

3.0

Peptone

7.0

Sodium chloride

5.0

Bile Salts No.3

1.5

Lactose

10.0

Neutral red

0.03

Crystal violet

0.002

Agar

12.0

pH 7.4 ± 0.2 @ 25°C

 

Violet Red Bile Agar (Dehydrated), Oxoid Preparation:
Suspend 38.5g in 1 litre of distilled water. Bring to the boil. Continue to boil for 2 minutes or for the minimum time necessary to dissolve completely and ensure that there are no remaining flecks of unmelted agar. No further sterilisation is necessary or desirable. Mix well before pouring.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C and use as freshly as possible.

Precautions
This medium is not completely specific for Enterobacteriaceae, other organisms e.g. Aeromonas and Yersinia species may give similar reactions.
The selectivity of the medium diminishes after 24 hours incubation and organisms previously suppressed may exhibit growth.

Vitox Supplement + Rehydration Fluid (For 2 L medium)

Brand:

Thermo ScientificTM OxoidTM

Oxoid Vitox Supplement is used for the preparation of Thayer Martin Medium and New York City Medium for the isolation of Neisseria spp.

  • Contents: Vitox Supplement (5 vials) plus reconstitution fluid (5 vials)
  • Add to GC Agar Base, Part No. CM0367B

Ordering Information:

  • Each vial of Vitox plus reconstitution fluid supplements 500mL of medium

Includes:

  • Five vials of Vitox plus five vials of reconstitution fluid

Vitox Supplement, Oxoid Composition

Vial contents
Vitamin B12 0.1mg
L-glutamine 100.0mg
Adenine 10.0mg
Guanine 0.3mg
p-Aminobenzoic acid 0.13mg
L-cystine 11.0mg
NAD (Coenzyme 1) 2.5mg
Cocarboxylase 1.0mg
Ferric nitrate 0.2mg
Thiamine 0.03mg
Cysteine hydrochloride 259.0mg

 

Vitox Rehydration Fluid , Oxoid Composition

Vial contents
Glucose 1.0g
Distilled water 10.0ml

 

Vitox, Oxoid Preparation:
Aseptically add one vial of Hydration Fluid to one vial of Vitox. Mix gently to dissolve completely. Aseptically add the contents of one vial to sterile medium of choice, cooled to approximately 50°C. Mix gently and pour into sterile Petri dishes.

Vitox Supplement + Rehydration Fluid (For 500 mL medium)

Brand:

Thermo ScientificTM OxoidTM

Oxoid Vitox Supplement is used for the preparation of Thayer Martin Medium and New York City Medium for the isolation of Neisseria spp.

  • Contents: Vitox Supplement (5 vials) plus reconstitution fluid (5 vials)
  • Add to GC Agar Base, Part No. CM0367B

Ordering Information:

  • Each vial of Vitox plus reconstitution fluid supplements 500mL of medium

Includes:

  • Five vials of Vitox plus five vials of reconstitution fluid

Vitox Supplement, Oxoid Composition

Vial contents
Vitamin B12 0.1mg
L-glutamine 100.0mg
Adenine 10.0mg
Guanine 0.3mg
p-Aminobenzoic acid 0.13mg
L-cystine 11.0mg
NAD (Coenzyme 1) 2.5mg
Cocarboxylase 1.0mg
Ferric nitrate 0.2mg
Thiamine 0.03mg
Cysteine hydrochloride 259.0mg

 

Vitox Rehydration Fluid , Oxoid Composition

Vial contents
Glucose 1.0g
Distilled water 10.0ml

 

Vitox, Oxoid Preparation:
Aseptically add one vial of Hydration Fluid to one vial of Vitox. Mix gently to dissolve completely. Aseptically add the contents of one vial to sterile medium of choice, cooled to approximately 50°C. Mix gently and pour into sterile Petri dishes.

Vogel-Johnson Agar 500g

Brand:

Thermo ScientificTM OxoidTM

Oxoid Vogel-Johnson Agar is used for the detection of Staphylococcus aureus from foods and clinical specimens.

Vogel-Johnson Agar, Oxoid Composition

Typical Formula*

gm/litre

Tryptone

10.0

Yeast extract

5.0

Mannitol

10.0

Dipotassium phosphate

5.0

Lithium chloride

5.0

Glycine

10.0

Phenol red

0.025

Agar

16.0

pH 7.2± 0.2 @ 25°C

 

Vogel-Johnson Agar, Oxoid Preparation:
Suspend 61g in 1 litre of distilled water and bring gently to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes. Cool to 50°C and add 5.7ml of sterile 3.5% potassium tellurite solution SR0030 (equivalent to 20ml of 1% potassium tellurite).

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.

Precautions
All presumptive Staphylococcus aureus colonies should be confirmed with further tests. Do not heat the medium after the addition of potassium tellurite.

Vor1 Voriconazole

Brand:

Thermo ScientificTM OxoidTM

Manually determine the antibiotic susceptibility of microorganisms using Antimicrobial Susceptibility Testing (AST) methods in conjunction with reliable, easy-to-use Thermo Scientific™ Oxoid™ Voriconazole Antimicrobial Susceptibility Disks.

Vortex Mixer

Brand:

Biologix

The Vortex Mixer is suitable for a variety of applications, from gentle mixing to vigorous resuspension of biological and chemical components in liquids. It is widely used in the fields of life science and physical and chemical analysis.

Features
• Orbital mixing movement
• Speed range: 0 – 2500 rpm, stepless speed settings
• Touch and continuous operation settings
• Cast aluminum base and specially designed vacuum suction feet keep the mixer stable
• Various adapters and accessories available for use with tubes of different sizes (sold separately)

Vortex Mixer Brochure

VP-A (alpha napthol 5%) BTL/12ml

Brand:

Thermo Scientific™ Remel™

Thermo Scientific™ Remel Voges-Proskauer A is for detection of acetylmethylcarbinol from glucose fermentation. Used in conjunction with VP-B, Part No. R21281. For use with MRVP Broth.

VP-B (40% KOH) BTL/25ml

Brand:

Thermo Scientific™ Remel™

  • Thermo Scientific™ Remel Voges-Proskauer B is for detection of acetylmethylcarbinol from glucose fermentation.
  • Used in conjunction with VP-A, REF R21200. For use with MRVP broth.

VRBA With Mug 500g

Brand:

Thermo ScientificTM OxoidTM

Oxoid Violet Red Bile Agar w/MUG is used for the presumptive identification of E. coli.

Violet Red Bile Agar with MUG, Oxoid Composition

Typical Formula*

gm/litre

Yeast extract

3.0

Peptone

7.0

Sodium chloride

5.0

Bile Salts No.3

1.5

Lactose

10.0

Neutral red

0.03

Crystal violet

0.002

Agar

12.0

4-methylumbelliferyl-ß-D-glucuronide (MUG)

0.1

pH 7.4 ± 0.2 @ 25°C

 

Violet Red Bile Agar with MUG, Oxoid Preparation:
Suspend 38.6g of VRBA with MUG in 1 litre of distilled water. Bring to the boil to dissolve completely. No further sterilisation is necessary or desirable. Mix well before pouring into sterile petri dishes.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C and use as freshly as possible.

VRE Agar Base 500g

Brand:

Thermo ScientificTM OxoidTM

Oxoid VRE Agar Base (Vancomycin Resistant Enterococci Agar Base) is used for selective isolation of vancomycin-resistant enterococci and high level aminoglycoside-resistant enterococci (HLARE) from clinical samples.Also available Meropenem Selective Supplement, Part No. SR0184E; Gentamicin Selective Supplement, Part No. SR0185E; and Vancomycin Selective Supplement, Part No. SR0186E.

VRE Agar Base, Oxoid Composition

Typical Formula*

gm/litre

Tryptone

20.0

Yeast extract

5.0

Sodium chloride

5.0

Sodium citrate

1.0

Aesculin

1.0

Ferric ammonium citrate

0.5

Sodium azide

0.15

Agar

10.0

pH 7.0 ± 0.2 @ 25°C

 

VRE Agar, Oxoid Preparation:
Suspend 42.6g of VRE Agar Base in 1 litre of distilled water. Warm to dissolve completely, sterilise by autoclaving at 121° C for 15 minutes and cool to 50°C. Supplement the medium as shown in the table below. Then Mix agar well and distribute into sterile Petri dishes.

Supplement

(mg per vial)

Reconstitution Volume

Sterile distilled water

VRE Agar Base

(per litre)

VRE’s

HLARE’s

Meropenem
SR0184
1mg

2ml

1 vial

Gentamicin
SR0185
256mg

3ml

2 vials

Vancomycin
SR0186
3mg

2ml

2 vials

 

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Prepared medium may be stored for up to two weeks at 2-8°C in the dark.

Precautions
VRE Broth Base, VRE Agar Base , Meropenem Supplement SR0184, Gentamicin Supplement SR0185 and Vancomycin Supplement SR0186 should only be used for in vitro diagnostic purposes. Do not use any of these beyond expiry date or if the products show any signs of deterioration.
Warning: Sodium azide is harmful if swallowed, please take all necessary precautions.

VRE Broth Base 500g

Brand:

Thermo ScientificTM OxoidTM

This product has been discontinued. Please contact us for more information.

  • Oxoid VRE Broth Base (Vancomycin Resistant Enterococci Broth Base) is for selective isolation of vancomycin-resistant enterococci and high Level aminoglycoside-resistant enterococci.
  • Also available Meropenem Selective Supplement, Part No. SR0184E; Gentamicin Selective Supplement, Part No. SR0185E; and Vancomycin Selective Supplement, Part No. SR0186E.

VRE Broth Base, Oxoid Composition

Typical Formula*

gm/litre

Calf brain infusion solids

12.5

Beef heart infusion solids

5.0

Proteose peptone

10.0

Glucose

2.0

Sodium chloride

5.0

Disodium phosphate

2.5

pH 7.4 ± 0.2 @ 25°C

 

VRE Broth, Oxoid Preparation:
Suspend 37.0g of VRE Broth Base in 1 litre of distilled water. Warm to dissolve completely, sterilise by autoclaving at 121°C for 15 minutes and cool to 50°C. Supplement the medium as shown in the table below. Then mix well and distribute into final sterile containers.

Supplement

(mg per vial)

Reconstitution Volume

Sterile distilled water

VRE Broth

(per litre)

Meropenem
SR0184
1mg

2ml

2 vials

Gentamicin
SR0185
256mg

3ml

Vancomycin
SR0186
3mg

2ml

 

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Prepared medium may be stored for up to two weeks at 2-8°C in the dark.

Precautions
VRE Broth Base, VRE Agar Base , Meropenem Supplement SR0184, Gentamicin Supplement SR0185 and Vancomycin Supplement SR0186 should only be used for in vitro diagnostic purposes. Do not use any of these beyond expiry date or if the products show any signs of deterioration.

VS20WAVE Maxi

Brand:

Cleaver Scientific

The new VS20 WAVE Maxi System is Cleaver Scientifics latest product innovation for large format vertical gel electrophoresis. Designed to perform a variety of separations, including first and second-dimension SDS-PAGE, native, preparative, gradient and high-resolution nucleic acid electrophoresis, plus capillary tube gel IEF and electroblotting, the VS20 WAVE is one of the most versatile maxi vertical systems available.

VWR Hycare Hand Sanitizer, WHO Recommended (carton)

Brand:

VWR

The VWR HYCARE HANDRUB is ready to use alcohol-based hand cleaner with World Health Organisation (WHO) recommended formulation.

1. Evidence-based, intrinsic advantages of fast-acting and broad-spectrum microbicidal activity with minimal risk of generating resistance to antimicrobial agents.

2. Suitability for use in resource-limited or remote areas with lack of accessibility to sinks or other facilities for hand hygiene (including clean water, towels, etc.)

3. Capacity to promote improved compliance with hand hygiene by making the process faster and more convenient.

4. Economic benefit by reducing annual costs for hand hygiene.

5. Minimization of risks from adverse events because of increased safety associated with better acceptability and tolerance than other products.

The advantages of VWR Hycare Handrub

  • The microbial activity of the WHO-recommended formulations was tested by WHO reference laboratories according to EN standards (EN1500).
  • Fragrance-free because of the risk of allergic reactions.
  • Strict quality control and testing in a qualified laboratory to ensure the composition is met to standard and no harmful chemicals like methanol are present.
  • Economy yet effective.

Formulation:

Isopropyl Alcohol

75% v/v

High Purity Water

25% v/v

Glycerol

1.45% v/v

Hydrogen Peroxide

0.125% v/v

 

** For more information, please read Brochure for VWR Hycare Product and COA for VWR Hycare Hand Sanitizer.

VWR Hycare Hand Sanitizer, WHO Recommended (loose pack)

Brand:

VWR

The VWR HYCARE HANDRUB is ready to use alcohol-based hand cleaner with World Health Organisation (WHO) recommended formulation.

1. Evidence-based, intrinsic advantages of fast-acting and broad-spectrum microbicidal activity with minimal risk of generating resistance to antimicrobial agents.

2. Suitability for use in resource-limited or remote areas with lack of accessibility to sinks or other facilities for hand hygiene (including clean water, towels, etc.)

3. Capacity to promote improved compliance with hand hygiene by making the process faster and more convenient.

4. Economic benefit by reducing annual costs for hand hygiene.

5. Minimization of risks from adverse events because of increased safety associated with better acceptability and tolerance than other products.

The advantages of VWR Hycare Handrub

  • The microbial activity of the WHO-recommended formulations was tested by WHO reference laboratories according to EN standards (EN1500).
  • Fragrance-free because of the risk of allergic reactions.
  • Strict quality control and testing in a qualified laboratory to ensure the composition is met to standard and no harmful chemicals like methanol are present.
  • Economy yet effective.

Formulation:

Isopropyl Alcohol

75% v/v

High Purity Water

25% v/v

Glycerol

1.45% v/v

Hydrogen Peroxide

0.125% v/v

 

** For more information, please read Brochure for VWR Hycare Product and COA for VWR Hycare Hand Sanitizer.

W-ZIP PLASTIC POUCHES WITH BOX/LABEL

Brand:

Thermo ScientificTM OxoidTM

Thermo Scientific™ Oxoid Compact Plastic Pouch is for use with Compact System.

W.L. Nutrient Agar 500g

Brand:

Thermo ScientificTM OxoidTM

  • Oxoid WL Nutrient Agar is used for the determination of the microbiological flora in brewing and fermentation processes.
  • Also available Cycloheximide 0.1% Solution, Part No. SR0222C.

WL Nutrient Agar, Oxoid Composition

Typical Formula*

gm/litre

Yeast extract

4.0

Tryptone

5.0

Glucose

50.0

Potassium dihydrogen phosphate

0.55

Potassium chloride

0.425

Calcium chloride

0.125

Magnesium sulphate

0.125

Ferric chloride

0.0025

Manganese sulphate

0.0025

Bromocresol green

0.022

Agar

15.0

pH 5.5 ± 0.2

 

WL Nutrient Agar, Oxoid Preparation:
Suspend 75g in 1 litre of distilled water. Bring to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes. If required the pH may be adjusted to 6.5 by the addition of 1% sodium bicarbonate solution.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.

Precautions
When handling cycloheximide observe the precautions to be taken under HAZARDS.

W1.25 Trimethoprim

Brand:

Thermo ScientificTM OxoidTM

Manually determine the antibiotic susceptibility of microorganisms using Antimicrobial Susceptibility Testing (AST) methods in conjunction with reliable, easy-to-use Thermo Scientific™ Oxoid™ Trimethoprim Antimicrobial Susceptibility Disks.

W2.5 Trimethoprim

Brand:

Thermo ScientificTM OxoidTM

** This item is not available at the moment. Please contact us for more information.
Manually determine the antibiotic susceptibility of microorganisms using Antimicrobial Susceptibility Testing (AST) methods in conjunction with reliable, easy-to-use Thermo Scientific™ Oxoid™ Trimethoprim Antimicrobial Susceptibility Disks.

W5 Trimethoprim

Brand:

Thermo ScientificTM OxoidTM

Manually determine the antibiotic susceptibility of microorganisms using Antimicrobial Susceptibility Testing (AST) methods in conjunction with reliable, easy-to-use Thermo Scientific™ Oxoid™ Trimethoprim Antimicrobial Susceptibility Disks.

WarmStart Colorimetric LAMP 2X Master Mix (DNA and RNA)

Brand:

New England Biolabs

Simple, one-step solution for Loop-Mediated Isothermal Amplification (LAMP) of DNA or RNA (RT-LAMP) targets

  • Fast, clear pink-to-yellow visible detection of amplification
  • WarmStart® feature inhibits activity at room temperature

WarmStart LAMP Kit (DNA and RNA)

Brand:

New England Biolabs

  • Simple, one-step solution for Loop-Mediated Isothermal Amplification (LAMP) of DNA or RNA (RT-LAMP) targets
  • Compatible with multiple detection methods
  • WarmStart® technology inhibits activity at room temperature

Water for chromatography (LC-MS Grade) LiChrosolv®

Brand:

Merck

Description

CAS number: 7732-18-5
Chemical Formula: H₂O
Molar Mass: 18.02 g/mol
Synonyms: Deionized water

With their high degree of UV transmittance, low particle count, low acidity and alkalinity and low evaporation residue level, LiChrosolv® solvents are ideal for reproducible separations. Since separations are normally carried out under gradient conditions in analytical HPLC, we offer solvents in “gradient grade” as well as “isocratic grade”. This enables to minimize the gradient effect of the solvent involved.

Water Plate Count Agar (ISO) 500g

Brand:

Thermo ScientificTM OxoidTM

Numerate all culturable microorganisms from water using colony count technique with Thermo Scientific™ Oxoid™ Water Plate Count Agar (Dehydrated). This nutritious, non-selective medium conforms to ISO 6222: 1999 (E) Water quality ― Enumeration of culturable microorganisms ― Colony count by inoculation in a nutrient agar culture medium1.

Water Plate Count Agar (Dehydrated), Oxoid Composition

Typical Formula*

gm/litre

Tryptone

6.0

Yeast Extract

3.0

Agar

15.0

pH 7.2 ± 0.2 @ 25°C

 

Water Plate Count Agar (Dehydrated), Oxoid Preparation:
Suspend 24g of Water Plate Count Agar (ISO) in 1 litre of distilled water and bring gently to the boil to dissolve. If desired, distribute volumes of 15ml to 20ml in tubes, bottles or other containers. Sterilise by autoclaving at 121°C for 15 minutes. After sterilisation, allow to cool and maintain at 45 ± 1°C using a water bath.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared plates of medium at 2-8°C.