Lauryl Tryptose Broth With Mug 500g
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
Oxoid Lauryl Tryptose Broth w/MUG is used for the presumptive identification of E. coli.
Lauryl Tryptose Broth with MUG, Oxoid Composition
Typical Formula* | gm/litre |
Tryptose | 20.0 |
Lactose | 5.0 |
Di-potassium hydrogen phosphate | 2.75 |
Potassium dihydrogen phosphate | 2.75 |
Sodium chloride | 5.0 |
Sodium lauryl sulphate | 0.1 |
4-methylumbelliferyl-b-D-glucuronide (MUG) | 0.05 |
pH 6.8 ± 0.2 @ 25°C |
Lauryl Tryptose Broth, Oxoid Preparation:
Suspend 35.65g of Lauryl Tryptose Broth with MUG in 1 litre of distilled water. Warm to 40°C. Mix well to dissolve and distribute into final containers holding inverted Durham tubes. (Please be aware of the special glassware requirements when using ultra-violet light.). Sterilise by autoclaving at 121° C for 15 minutes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at room temperature.
LB agar (MILLER) for Microbiology (Merck)
Login to see pricesBrand:
Merck
Description
LB Agar Miller from Merck is a commonly used medium in microbiology laboratories and is suitable for routine bacterial culture and transformation experiments. It is a formulation of Luria-Bertani (LB) agar developed by Miller, which includes a mixture of peptides, amino acids, and vitamins to support the growth of a wide range of bacteria.
LCAT Selective Supplement 1 x 10 Vials
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
Oxoid LCAT Selective Supplement is used for the preparation of New York City Medium for the isolation of Neisseria spp.
- Add to GC Agar Base, Part No. CM0367B
- Each vial supplements 500mL of medium
LCAT Selective Supplement, Oxoid Composition
Vial contents (each vial is sufficient for 500ml of medium) | |
Lincomycin | 0.5 mg |
Colistin sulphate | 3.0 mg |
Amphotericin B | 0.5 mg |
Trimethoprim | 3.25 mg |
LCAT Selective Medium Preparation:
Reconstitute one vial as directed, aseptically add the contents to 490ml of sterile GC Agar Base CM0367, cooled to approximately 50°C, containing 50 ml Laked Horse Blood SR0048 and the rehydrated contents of one vial of Yeast Autolysate Supplement SR0105. Mix gently and pour into sterile Petri dishes.
Legionella (GVPC) Selective Supplement 1 x 10 Vials
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
Oxoid Legionella GVPC Selective Supplement is used for the isolation of Legionella spp. from environmental samples.
- Add to Legionella CYE Agar Base, Part No. CM0655B
- Each vial supplements 500mL of medium
Legionella GVPC Selective Supplement, Oxoid Composition
Vial contents (each vial is sufficient to supplement 500 ml medium) | |
Glycine (Ammonia free) | 1.5 g |
Vancomycin hydrochloride | 0.5 mg |
Polymyxin B sulphate | 40000 IU |
Cycloheximide | 40.0 mg |
Legionella GVPC Selective Medium Preparation:
Reconstitute one vial as directed, aseptically add the contents to 500 ml of sterile Legionella CYE Agar Base CM0655 to which one vial of Legionella BCYEa Legionella Growth Supplement SR0110C has been added cooled to approximately 50°C. Mix gently and pour into sterile Petri dishes.
Legionella BCYE Growth Supplement
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
- Oxoid Legionella BCYE Supplement is used for the isolation of Legionella spp.
- Add to Legionella CYE Agar Base, Part No. CM0655B.
Legionella BCYE Growth Supplement, Oxoid Composition
Vial contents | SR0110C | Supplement per litre |
Buffer/Potassium hydroxide | 5.0g | 10g |
Ferric pyrophosphate | 0.125g | 0.25g |
L-cysteine HCl | 0.2g | 0.4g |
a -Ketoglutarate | 0.5g | 1.0g |
BCYE Agar, Oxoid Preparation:
Suspend 2.5g of Legionella CYE Agar Base per 90ml of distilled water and bring gently to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes. Reconstitute one vial SR0110A per 100ml medium or one vial SR0110C per 500ml medium, as directed. Allow medium to cool to 50°C and aseptically add the vial contents. Mix gently and pour into sterile Petri dishes. The final pH of the medium should be 6.9 ± 0.2.
Storage conditions and Shelf life
Store the dehydrated medium below 30°C and use before the expiry date on the label.
Store the prepared plates at 2-8°C away from light.
Legionella BCYE Growth Supplement 1 x 10 Vials
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
- Oxoid Legionella BCYE Supplement is used for the isolation of Legionella spp.
- Add to Legionella CYE Agar Base, Part No. CM0655B.
Legionella BCYE Growth Supplement, Oxoid Composition
Vial contents | SR0110A | Supplement per litre |
Buffer/Potassium hydroxide | 1.0g | 10g |
Ferric pyrophosphate | 0.025g | 0.25g |
L-cysteine HCl | 0.04g | 0.4g |
a -Ketoglutarate | 0.1g | 1.0g |
BCYE Agar, Oxoid Preparation:
Suspend 2.5g of Legionella CYE Agar Base per 90ml of distilled water and bring gently to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes. Reconstitute one vial SR0110A per 100ml medium or one vial SR0110C per 500ml medium, as directed. Allow medium to cool to 50°C and aseptically add the vial contents. Mix gently and pour into sterile Petri dishes. The final pH of the medium should be 6.9 ± 0.2.
Storage conditions and Shelf life
Store the dehydrated medium below 30°C and use before the expiry date on the label.
Store the prepared plates at 2-8°C away from light.
Legionella BCYE Supplement w/o L-Cysteine 1 x 10 Vials
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
Oxoid Legionella BCYE Supplement w/o L-cysteine is used for the isolation of Legionella spp.
- Add to Legionella CYE Agar Base, Part No. CM0655B
- Each vial supplements 100mL of medium
Legionella BCYE Growth Supplement without L-cysteine, Oxoid Composition
Vial contents (each vial is sufficient for 100ml of medium) | |
ACES Buffer/Potassium hydroxide | 1.0g |
Ferric pyrophosphate | 0.025g |
a -ketoglutarate | 0.1g |
Legionella BCYE Growth Medium Preparation:
Reconstitute one vial as directed, aseptically add the contents to 90ml of sterile Legionella CYE Agar Base (CM0655) cooled to approximately 50°C. Mix gently and pour into sterile Petri dishes.
Legionella BMPA-α Selective Supplement 1X10 Vials
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
Thermo Scientific™ Oxoid Legionella BMPA-α Selective Supplement is a selective supplement for the isolation of legionellae when used with Legionella BCYE Growth Supplement (SR0010) and Legionella CYE Agar Base (CM0655).
Legionella BMPA-α Selective Supplement, Oxoid Composition
Vial contents | SR0111E | per litre |
Cefamandole | 400µg | 4.0mg |
Polymyxin | 8,000IU | 80,000IU |
Anisomycin | 8.0mg | 80.0mg |
Legionella BMPA-α Selective Medium Preparation:
Reconstitute one vial SR0111E per 100ml medium as directed. Aseptically add the vial contents to BCYE-a Medium prepared from Legionella CYE Agar Base (CM0655) and Legionella BCYE Supplement (SR0110) and cooled to 50°C. Mix well and pour into sterile Petri dishes.
Legionella CYE Agar Base 500g
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
Isolate Legionella from environmental samples and clinical specimens using Thermo Scientific™ Oxoid™ Legionella CYE Agar Base when used with Legionella Growth Supplement SR01110. Legionella CYE Agar Base is a non-selective medium that exhibits optimal recovery of legionellaceae in short incubation periods from both environmental samples and clinical specimens.
Legionella CYE Agar Base, Oxoid Composition
Typical Formula* | gm/litre |
Activated charcoal | 2.0 |
Yeast extract | 10.0 |
Agar | 13.0 |
BCYE Agar, Oxoid Preparation:
Suspend 2.5g of Legionella CYE Agar Base per 90ml of distilled water and bring gently to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes. Reconstitute one vial SR0110A per 100ml medium or one vial SR0110C per 500ml medium, as directed. Allow medium to cool to 50°C and aseptically add the vial contents. Mix gently and pour into sterile Petri dishes. The final pH of the medium should be 6.9 ± 0.2.
Storage conditions and Shelf life
Store the dehydrated medium below 30°C and use before the expiry date on the label.
Store the prepared plates at 2-8°C away from light.
Lev1 Levofloxacin
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
Lev5 Levofloxacin
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
Levofloxacin 32 M.I.C.E. (10 Pack)
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
**This product is not available at the moment.
Effortlessly establish accurate Minimum Inhibitory Concentration (MIC) values manually using Thermo Scientific™ Oxoid™ Levofloxacin M.I.C.Evaluator Strips (M.I.C.E.™).
Levofloxacin 32 M.I.C.E. (50 Pack)
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
**This product is not available at the moment.
Effortlessly establish accurate Minimum Inhibitory Concentration (MIC) values manually using Thermo Scientific™ Oxoid™ Levofloxacin M.I.C.Evaluator Strips (M.I.C.E.™).
Linezolid 256 M.I.C.E. (10 pack)
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
**This product is not available at the moment.
Effortlessly establish accurate Minimum Inhibitory Concentration (MIC) values manually using Thermo Scientific™ Oxoid™ Linezolid M.I.C.Evaluator Strips (M.I.C.E.™).
Linezolid 256 M.I.C.E. (50 Pack)
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
**This product is not available at the moment.
Effortlessly establish accurate Minimum Inhibitory Concentration (MIC) values manually using Thermo Scientific™ Oxoid™ Linezolid M.I.C.Evaluator Strips (M.I.C.E.™).
Listeria Enrichment Broth Base 500g
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
- Oxoid Listeria Enrichment Broth is used for the enrichment of Listeria species.
- Also available Listeria Selective Supplement, Part No. SR0140E or SR0141E and Modified Listeria Selective Enrichment Supplement, Part No. SR0206E or SR0206B.
Listeria Enrichment Broth Base, Oxoid Composition
Typical Formula* | gm/litre |
Tryptone soya broth | 30.0 |
Yeast extract | 6.0 |
pH 7.3 ± 0.2 @ 25°C |
Listeria Enrichment Broth, Oxoid Preparation:
Suspend 18g in 500ml of distilled water. Add the contents of one vial of Listeria Selective Enrichment Supplement (SR0141), reconstituted with 2ml of distilled water. Sterilize by autoclaving at 121°C for 15 minutes. Cool to 50°C, mix well and distribute into sterile containers in volumes as required.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
Precautions
Note the precautions stated under Listeria Selective Medium (Oxford) CM0856 and SR0140. Broth cultures are more dangerous than colonies on agar plates.
Store prepared medium away from light. Acriflavine can photo-oxidise to form inhibitory compounds against Listeria.
Supplement SR0141 used in this medium contains a toxic concentration of cycloheximide. Note the precautions to be taken under HAZARDS.
Listeria Enrichment Broth Base UVM 500g
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
- Oxoid Listeria Enrichment Broth Base (UVM Formulation) is a two-step selective enrichment (USDA-FSIS) method.
- Also available Listeria Primary Enrichment Supplement-UVM I, Part No. SR0142E or SR0142B and Listeria Secondary Selective Enrichment Supplement-UVM II, Part No. SR0143E.
Listeria Enrichment Broth Base (UVM formulation) is to be used with the appropriate supplement for UVMI broth or UVMII broth.
Listeria Enrichment Broth Base (UVM formulation), Oxoid Composition
Typical Formula* | gm/litre |
Proteose peptone | 5.0 |
Tryptone | 5.0 |
`Lab-Lemco’ powder | 5.0 |
Yeast extract | 5.0 |
Sodium chloride | 20.0 |
Disodium hydrogen phosphate | 12.0 |
Potassium dihydrogen phosphate | 1.35 |
Aesculin | 1.0 |
pH 7.4 ± 0.2 @ 25°C |
Listeria Enrichment Broth, Oxoid Preparation:
Suspend 27.2g in 500ml of distilled water. Sterilise by autoclaving at 121°C for 15 minutes. Cool to 50°C.
To Prepare Listeria Primary Selective Enrichment Medium (UVM I):
Aseptically add the contents of 1 vial of Listeria Primary Selective Enrichment Supplement (UVM I) SR0142 reconsituted as directed. Mix well and distribute into sterile containers.
To Prepare Listeria Secondary Selective Enrichment Medium (UVM II):
Aseptically add the contents of 1 vial of Listeria Secondary Selective Enrichment Supplement (UVM II) SR0143 reconsituted as directed. Mix well and distribute into sterile containers.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
Precautions
Note the precautions stated under Listeria Selective Medium (Oxford) CM0856 and SR0140.
Broth cultures are more dangerous than colonies on agar plates.
Store prepared medium away from light. Acriflavine can photo-oxidise to form inhibitory compounds against listeriae.
Listeria Primary Enrichment Supplement (UVMI) 1X10Vials
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
Thermo Scientific™ Oxoid Listeria Primary Enrichment Supplement (UVMI) is a primary selective enrichment supplement for the isolation of listeria when used with Listeria Enrichment Broth Base (UVM Formulation) CM0863.
Oxoid Listeria Primary Enrichment Supplement (UVMI), Oxoid Composition
Vial contents (each vial is sufficient for 500ml of medium) | per vial | per litre |
Nalidixic acid | 10.0mg | 20.0mg |
Acriflavine hydrochloride | 6.0mg | 12.0mg |
Listeria Primary Selective Enrichment Medium, Oxoid Preparation:
Suspend 27.2g in 500ml of distilled water. Sterilise by autoclaving at 121°C for 15 minutes. Cool to 50°C.
Aseptically add the contents of 1 vial of Listeria Primary Selective Enrichment Supplement (UVM I) SR0142 reconsituted as directed. Mix well and distribute into sterile containers.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
Precautions
Note the precautions stated under Listeria Selective Medium (Oxford) CM0856 and SR0140.
Broth cultures are more dangerous than colonies on agar plates.
Store prepared medium away from light. Acriflavine can photo-oxidise to form inhibitory compounds against listeriae.
Listeria Secondary Enrichment Supplement (UVMII) 1x10v
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
Oxoid Listeria Secondary Selective Enrichment Supplement, UVMII is used in a two-step selective enrichment (USDS-FSIS) method for the enrichment of Listeria spp.
- Add to Listeria Enrichment Broth Base (UVM formulation), Part No. CM0863B
- Each vial supplements 500mL of medium
Listeria Secondary Selective Enrichment Supplement (UVMII), Oxoid Composition
Vial contents (each vial is sufficient for 500ml of medium) | per vial | per litre |
Nalidixic acid | 10.0mg | 20.0mg |
Acriflavine hydrochloride | 12.5mg | 25.0mg |
Listeria Secondary Selective Enrichment Medium, Oxoid Preparation:
Suspend 27.2g in 500ml of distilled water. Sterilise by autoclaving at 121°C for 15 minutes. Cool to 50°C.
Aseptically add the contents of 1 vial of Listeria Secondary Selective Enrichment Supplement (UVM II) SR0143 reconsituted as directed. Mix well and distribute into sterile containers.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
Precautions
Note the precautions stated under Listeria Selective Medium (Oxford) CM0856 and SR0140.
Broth cultures are more dangerous than colonies on agar plates.
Store prepared medium away from light. Acriflavine can photo-oxidise to form inhibitory compounds against listeriae.
Listeria Selective Agar Base 500g
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
- Oxoid Listeria Selective Oxford Agar Base is a selective and diagnostic medium for the detection of Listeria monocytogenes.
- Also available Listeria Selective Supplement, Part No. SR0140E and Modified Listeria Selective Supplement, Part No. SR0206E or SR0206B.
Listeria Selective Oxford Agar Base, Oxoid Composition
Typical Formula* | gm/litre |
Columbia Blood Agar Base | 39.0 |
Aesculin | 1.0 |
Ferric ammonium citrate | 0.5 |
Lithium chloride | 15.0 |
pH 7.0 ± 0.2 @ 25°C |
Listeria Selective Oxford Agar, Oxoid Preparation:
Suspend 27.75 of the Listeria Selective Agar Base (Oxford Formulation) in 500ml of distilled water. Bring gently to the boil to dissolve. Sterilise by autoclaving at 121°C for 15 minutes. Cool to 50°C and aseptically add the contents of one vial of Listeria Selective Supplement (Oxford Formulation) or Modified Listeria Selective Supplement (Oxford) SR0206, SR0140 reconstituted with 5ml of 70% ethanol. Mix well and pour into sterile Petri dishes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared plates at 2-8°C in the dark.
Listeria Selective Enrich Supplement 10×2.25 Litres
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
Oxoid Listeria Selective Enrichment Supplement, Modified is used for the enrichment of Listeria spp.
- Modified with 10mg/L acriflavin
- Add to Listeria Enrichment Broth, Part No. CM0862B
- Each vial supplements 2.25L of medium
Listeria Selective Enrichment Supplement (Modified), Oxoid Composition
Vial contents (each vial is sufficient for 2,250mls of medium) | per vial | per litre |
Nalidixic acid | 90.0mg | 40.0mg |
Cycloheximide | 112.5mg | 50.0mg |
Acriflavine hydrochloride | 22.5mg | 10.0mg |
Listeria Selective Enrichment Medium Preparation:
Aseptically add 10ml of distilled water to one vial and invert gently to dissolve. Add the vial contents to 2.25 litres of Listeria Enrichment Broth Base. Sterilize by autoclaving at 121°C for 15 minutes. Cool to 50°C, mix well and distribute into sterile containers in volumes as required .
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.
Listeria Selective Supplement (Oxford) 1 x 10 Vials
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
- Oxoid Listeria Selective Supplement (Oxford) is used for the detection of Listeria monocytogenes.
- Add to Listeria Selective Agar Base, Part No. CM0856B.
Listeria Selective Supplement (Oxford), Oxoid Composition
Vial contents (each vial is sufficient for 500ml of medium) | per vial | per litre |
Cycloheximide | 200mg | 400mg |
Colistin sulphate | 10.0mg | 20.0mg |
Acriflavine | 2.5mg | 5.0mg |
Cefotetan | 1.0mg | 2.0mg |
Fosfomycin | 5.0mg | 10.0mg |
Listeria Selective Medium Preparation:
Reconstitute one vial as directed, aseptically add the contents to 500 ml of Listeria Selective Agar Base (Oxford Formulation) CM0856, cooled to approximately 50°C. Mix well and pour into sterile Petri dishes.
Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared plates at 2-8°C in the dark.
Listeria Selective Supplement 1 x 10 Vials
Login to see pricesBrand:
Thermo ScientificTM OxoidTM
Oxoid Listeria Selective Enrichment Supplement is used for the enrichment of Listeria spp.
- Add to Listeria Enrichment Broth, Part No. CM0862B
- Each vial supplements 500mL of medium
Listeria Selective Enrichment Supplement, Oxoid Composition
Vial contents: (each vial is sufficient for 500ml of medium) | per vial | per litre |
Nalidixic acid | 20.0mg | 40.0mg |
Cycloheximide | 25.0mg | 50.0mg |
Acriflavine hydrochloride | 7.5mg | 15.0mg |
Listeria Selective Enrichment Medium Preparation:
Reconstitute one vial as directed, and add the contents to 500ml of Listeria Enrichment Broth Base (CM0862). Sterilize by autoclaving at 121°C for 15 minutes. Cool to 50°C and mix well before distributing into sterile containers in volumes as required.
Storage conditions and Shelf life
Listeria Selective Enrichment Supplement SR0141 as supplied should be stored at 2-8°C. When stored as directed the reagents are stable until the expiry date printed on the label.
Precautions
Listeria Selective Enrichment Supplement contains cycloheximide and is toxic if swallowed, inhaled or by skin contact. As a precaution when handling wear gloves and eye/face protection.
Acriflavine is activated by light and may form compounds inhibitory for Listeria.
Litmus Milk, for Microbiology, NutriSelect™ Plus, Sigma
Login to see pricesBrand:
Sigma-Aldrich
Application
For maintenance of Lactobacilli and for determining the action of bacteria on milk.
Typical Formula * | gm/litre |
Litmus | 0.5 |
Skim Milk Powder | 100 |
Sodium Sulfite | 0.5 |
Final pH: 6.8±0.2 (25 °C)