Show sidebar

W-ZIP PLASTIC POUCHES WITH BOX/LABEL

Brand:

Thermo ScientificTM OxoidTM

Thermo Scientific™ Oxoid Compact Plastic Pouch is for use with Compact System.

O.G.Y.E. Selective Supplement 1 x 10 Vial

Brand:

Thermo ScientificTM OxoidTM

Oxoid OGYE Selective Supplement (Oxytetracycline Glucose Yeast Extract) is added to Oxytetracycline Glucose Yeast Extract Agar Base, Part No. CM0545B.

  • Add to Oxytetracycline Glucose Yeast Extract Agar Base, Part No. CM0545B
  • Each vial supplements 500mL of medium

OGYE Selective Supplement, Oxoid Composition

Vial contents (each vial is sufficient for 500 ml of medium)
per vial
per litre
Oxytetracycline (in buffered base)

50mg

100mg

 

OGYE Selective Medium Preparation:
Suspend 18.5g in 500ml of distilled water and bring gently to the boil to dissolve completely. Sterilise by autoclaving at 115°C for 10 minutes. Allow the medium to cool to 50°C and aseptically add the contents of one vial of Oxytetracycline GYE Selective Supplement (SR0073) reconstituted as directed. Mix thoroughly and pour into sterile Petri dishes. The pH of this medium should be 7.0±0.2 @ 25°C.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.

M.R.S. Broth 500g

Brand:

Thermo ScientificTM OxoidTM

Isolate and enumerate lactic acid bacteria from food with Thermo Scientific™ Oxoid™ MRS Broth (DeMan, Rogosa and Sharpe) (Dehydrated). This non-selective medium is designed to support profuse growth of lactic acid bacteria.

MRS Broth (DeMan, Rogosa and Sharpe), Oxoid Composition

Typical Formula*

gm/litre

Peptone

10.0

`Lab-Lemco’ powder

8.0

Yeast extract

4.0

Glucose

20.0

Sorbitan mono-oleate

1 ml

Dipotassium hydrogen phosphate

2.0

Sodium acetate 3H2O

5.0

Triammonium citrate

2.0

Magnesium sulphate 7H2O

0.2

Manganese sulphate 4H2O

0.05

pH 6.2 ± 0.2 @ 25°C

 

MRS Broth (DeMan, Rogosa and Sharpe), Oxoid Preparation:
Add 52g to 1 litre of distilled water at approximately 60°C. Mix until completely dissolved. Dispense into final containers and sterilise by autoclaving at 121°C for 15 minutes.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.

Tryptone Soya Agar 500g, Oxoid

Brand:

Thermo ScientificTM OxoidTM

Tryptone Soya Agar, Oxoid (dehydrated) is suitable to grow a wide variety of microorganisms. It’s a general-purpose agar medium containing two peptones, which supports the growth of both aerobes and anaerobes, the latter being grown either in deep cultures or by incubation under anaerobic conditions. Tryptone Soya Agar is recommended as a reference medium when testing selective media to measure the degree of inhibition.

Composition of Tryptone Soya Agar
Typical Formula
gm/litre
Pancreatic digest of casein

15.0

Enzymatic* digest of soya bean

5.0

Sodium chloride

5.0

Agar

15.0

pH 7.3 ± 0.2 @ 25°C

*Contains papain

Preparation of Tryptone Soya Agar, Oxoid

First, you add 40g of tryptone soya agar to 1 litre of distilled water (purified as required). You can boil to dissolve the powder completely. After dissolved, you can sterilise the medium by autoclaving at 121°C for 15 minutes.

Storage Condition and Shelf Life of Tryptone Soya Agar, Oxoid

You can store the dehydrated tryptone soya agar at 10-30°C and use before the expiry date on the label or store the prepared plates of a medium at 2-8°C.

Mannitol Salt Agar 500g

Brand:

Thermo ScientificTM OxoidTM

Presumptively detect, isolate and enumerate pathogenic staphylococci in milk, food, fish and other specimens with Thermo Scientific™ Oxoid™ Mannitol Salt Agar (Dehydrated). Due to high concentrations of salt in the medium, most unwanted bacteria are inhibited with the exception of some halophilic marine organisms. Presumptive coagulase-positive staphylococci produce colonies surrounded by bright yellow zones while non-pathogenic staphylococci produce colonies with reddish purple zones.

Mannitol Salt Agar, Oxoid Composition

Typical Formula*

gm/litre

`Lab-Lemco’ powder

1.0

Peptone

10.0

Mannitol

10.0

Sodium chloride

75.0

Phenol red

0.025

Agar

15.0

pH 7.5 ± 0.2 @ 25°C

 

Mannitol Salt Agar, Oxoid Preparation:
Suspend 111g in 1 litre of distilled water and bring to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared plates at 2-8°C.

Malt Extract Broth 500g

Brand:

Thermo ScientificTM OxoidTM

Oxoid Malt Extract Broth is used for the identification of yeast and molds in sterility testing.

Malt Extract Broth, Oxoid Composition

Typical Formula*

gm/litre

Malt extract

17.0

Mycological peptone

3.0

pH 5.4 ± 0.2

 

Malt Extract Broth, Oxoid Preparation:
Add 20g to 1 litre of distilled water. Mix well, distribute into final containers and sterilise by autoclaving at 115°C for 10 minutes. This liquid medium is recommended for the cultivation of moulds and yeasts, during tests for sterility, etc.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.

Defibrinated Sheep Blood (25ML)

Brand:

Thermo ScientificTM OxoidTM

Thermo Scientific™ Oxoid Defibrinated Sheep Blood is a blood product.

**This product is not available at the moment.

Chloramphenicol Supplement 500ml

Brand:

Thermo ScientificTM OxoidTM

For the isolation of yeast and molds associated with spoilage, add Oxoid Chloramphenicol Selective Supplement to DRBC Agar Base, Part No. CM0727B; for the enumeration of yeast and molds in foods, add to Rose Bengal Chloramphenicol Agar Base, Part No. CM0549B.

Chloramphenicol Selective Supplement, Oxoid Composition

Vial contents

SR0078E
(1 vial per 500ml medium

per litre
Chloramphenicol

50mg

100mg

 

Chloramphenicol Selective Medium, Oxoid Preparation:
Reconstitute one vial SR0078E per 500ml medium as directed. Add the vial contents to base medium and mix gently. Sterilise by autoclaving (see media for full details), cool to 50°C, mix gently and pour into Petri dishes.

T.T.C. And Malt Extract Flexi-Slide

Brand:

Thermo ScientificTM OxoidTM

Make colony counting simple for aerobic bacteria, yeast, mold, coliform bacteria and Enterobacteriaceae with the easily disposable Thermo Scientific™ Oxoid™ Dip-Slides™ Industrial. Simple-to-use for the operator and where laboratory facilities are limited, the Dip Slide is coated on both sides with a solid culture medium with the opportunity for different media to be carried on each side, making the process time- and cost-effective.

Fox30 Cefoxitin

Brand:

Thermo ScientificTM OxoidTM

Manually determine the antibiotic susceptibility of microorganisms using Antimicrobial Susceptibility Testing (AST) methods in conjunction with reliable, easy-to-use Thermo Scientific™ Oxoid™ Cefoxitin Antimicrobial Susceptibility Disks.

Ak30 Amikacin

Brand:

Thermo ScientificTM OxoidTM

Manually determine the antibiotic susceptibility of microorganisms using Antimicrobial Susceptibility Testing (AST) methods in conjunction with reliable, easy-to-use Thermo Scientific™ Oxoid™ Amikacin Antimicrobial Susceptibility Disks.

Amp10 Ampicillin

Brand:

Thermo ScientificTM OxoidTM

Manually determine the antibiotic susceptibility of microorganisms using Antimicrobial Susceptibility Testing (AST) methods in conjunction with reliable, easy-to-use Thermo Scientific™ Oxoid™ Ampicillin Antimicrobial Susceptibility Disks.

Sheep Blood Agar Base 500g

Brand:

Thermo ScientificTM OxoidTM

Cultivate and isolate fastidious microorganisms from clinical samples through improved hemolytic reactions with sheep blood with Thermo Fisher™ Oxoid™ Sheep Blood Agar Base (Dehydrated) when used with sheep blood. Sheep Blood Agar Base was developed to meet the demand for an especially nutritious blood agar base which would permit the maximum recovery of organisms without interfering with their hemolytic reactions when used with sheep blood.

Sheep Blood Agar Base (Dehydrated), Oxoid Composition

Typical Formula*

gm/litre

Tryptone

14.0

Peptone Neutralised

4.5

Yeast extract

4.5

Sodium chloride

5.0

Agar

12.0

Final pH 7.3 ± 0.2 @ 25°C

 

Sheep Blood Agar Base (Dehydrated), Oxoid Preparation:
Suspend 40g in 1 litre of distilled water and bring to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes. Cool to 50°C and aseptically add 7% sterile sheep blood.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.

Peptone Water 500g, Oxoid

Brand:

Thermo ScientificTM OxoidTM

Peptone water (CM0009B), Oxoid, is a basal medium that used as a growth medium or as the basis of carbohydrate fermentation media. A pure culture in Peptone Water is a convenient inoculum for a series of fermentation tubes or other diagnostic media.

Typical Formula*

gm/litre

Peptone

10.0

Sodium Chloride

5.0

pH 7.2 ± 0.2 @ 25°C

 

Directions

Add 15g to 1 litre of distilled water. Mix well and distribute into final containers. Sterilise by autoclaving at 121°C for 15 minutes.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium below 25°C.

Nutrient Agar 500g, Oxoid

Brand:

Thermo ScientificTM OxoidTM

Nutrient agar (500g, Oxoid) is a culture media that used to cultivate and isolate fastidious pathogens and other microorganisms. This non-selective medium contains beef extracts combined with peptone, yeast extracts and sodium chloride to provide the nitrogen compounds, carbon, vitamins and some trace ingredients necessary for the growth of bacteria. A general-purpose medium which may be enriched with up to 10% blood or other biological fluid.

Nutrient Agar, Oxoid Composition

Typical Formula *
gm/litre
`Lab-Lemco’ powder

1.0

Yeast extract

2.0

Peptone

5.0

Sodium chloride

5.0

Agar

15.0

pH 7.4 ± 0.2 @ 25°C

 

Nutrient Agar, Oxoid Preparation:

Powder: Suspend 28g of nutrient agar in 1 litre of distilled water. Bring to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.

OCLA (ISO) Differential Supplement

Brand:

Thermo ScientificTM OxoidTM

This product has been discontinued, please refer to SR0258E

Thermo Scientific™ Oxoid OCLA (ISO) Differential Supplement is a differential supplement for use with Chromogenic Listeria Agar (ISO).

OCLA (ISO) Differential Supplement, Oxoid Composition

Typical Formula

SR0244E
(1 vial per 500ml
medium)

per litre
L-α-phospotidylinositol solution

20.0ml

40.0ml

 

Modified ISO Preparation:
Suspend 34.5g of Chromogenic Listeria Agar (ISO) in 480ml of distilled water. Mix well and sterilize by autoclaving at 121°C for 15 minutes. Cool the medium to 46°C and add one vial of Chromogenic Listeria Selective Supplement (ISO), reconstituted as directed and one vial of Brilliance Listeria Differential Supplement. Mix well and pour into sterile Petri dishes.

ISO Preparation:
Suspend 34.5g of Chromogenic Listeria Agar (ISO) Base in 480ml of distilled water. Mix well and sterilise by autoclaving at 121ºC for 15 minutes. Cool the medium to around 50ºC, and add one vial of Chromogenic Listeria Selective Supplement (ISO), re-suspended as directed, and one vial of OCLA (ISO) Differential Supplement. Mix well and pour into sterile Petri dishes.

Storage conditions and Shelf life
The dehydrated medium should be stored at 10-30°C and used before the expiry date on the label.
Prepared medium may be stored for up to 2 weeks at 2-8°C.

PALCAM Supplement 1 X 10 Vials

Brand:

Thermo ScientificTM OxoidTM

Thermo Scientific™ Oxoid PALCAM Supplement is a selective supplement for use with PALCAM Agar Base.

PALCAM Supplement, Oxoid Composition

Typical Formula*
per litre
Polymyxin B

10.0mg

Acriflavine hydrochloride

5.0mg

Ceftazidime

20.0mg

 

PALCAM Agar, Oxoid Preparation:
Suspend 34.5g per 500ml of distilled water. Bring gently to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes. Cool to 50°C, and aseptically add PALCAM Selective Supplement (SR0150), reconstitutes as directed. Mix well and pour into sterile Petri dishes.

The addition of 2.5% (v/v) Egg Yolk Emulsion (SR0047) to the medium may aid the recovery of damaged Listeria.

Storage conditions and Shelf life
Store the selective supplement in the dark at 2-8°C and use before the expiry date on the label.
The prepared medium may be stored for up to 4 weeks at 2-8°C in the dark.

Egg Yolk Tellurite Emulsion

Brand:

Thermo ScientificTM OxoidTM

Thermo Scientific™ Oxoid Egg Yolk Tellurite Emulsion is an emulsion of egg yolk containing potassium tellurite for use in Baird-Parker Medium CM0275 and Baird-Parker Medium (ISO) CM1127.

Tryptone Soya Broth (acc. to EP/USP)

Brand:

Thermo ScientificTM OxoidTM

Thermo Scientific™ Oxoid Tryptone Soya Broth is tested according to EP/USP.

Tryptone Soya Broth, Oxoid Composition

Formula

gm/litre

Pancreatic digest of casein

17.0

Enzymatic digest of soya bean*

3.0

Sodium chloride

5.0

Dipotassium hydrogen phosphate

2.5

Glucose

2.5

pH 7.3 ± 0.2 @ 25°C

*Contains papain

Tryptone Soya Broth, Oxoid Preparation:
Add 30g to 1 litre of water (purified as required), mix well and distribute into final containers. Sterilise by autoclaving at 121°C for 15 minutes.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium away form the light at room temperature.

Disk Dispenser 8 Place 90mm Skirt

Brand:

Thermo ScientificTM OxoidTM

Accurately place antimicrobial susceptibility disks onto your media of choice when carrying out manual Antimicrobial Susceptibility Testing methods using a self-tamping Thermo Scientific™ Oxoid™ Antimicrobial Susceptibility Disk Dispenser.

Vancomycin Supplement (5mg)

Brand:

Thermo ScientificTM OxoidTM

Thermo Scientific™ Oxoid Vancomycin Supplement is for addition to selective media for the isolation of Vancomycin Resistant Enterococci (VRE) and High Level Aminoglycoside Resistant Enterococci (HLARE) from clinical specimens.

  • Each vial supplements 500mL of medium

Vancomycin Supplement, Oxoid Composition

Vial contents: (each vial sufficient for 500ml of medium)
per vial
per litre
Vancomycin
5mg
10mg

 

Cronobacter Screening Broth (CSB), Oxoid Preparation:
Dissolve 14.02g in 500ml of distilled water. Sterilize by autoclaving at 121°C for 15 minutes. Cool to approximately 50°C, and aseptically add the contents of 1 vial of Vancomycin Supplement (5mg) (SR0247E) reconstituted as directed. Mix well and aseptically dispense into sterile containers.

Modified Lauryl Sulphate Tryptose Broth, Oxoid Preparation:
Dissolve 32.3g in 500ml of distilled water. Sterilize by autoclaving at 121°C for 15 minutes. Cool to approximately 50°C, and aseptically add the contents of 1 vial of Vancomycin Supplement (5mg) (SR0247E) reconstituted as directed. Mix well and aseptically dispense into sterile containers.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.

ORSAB Selective Supplement

Brand:

Thermo ScientificTM OxoidTM

This product has been discontinued. Please contact us for more information.

Oxoid ORSAB Selective Supplement (Oxacillin Resistance Screening Agar Base Selective Supplement) is added to Oxacillin Resistance Screening Agar Base, Part No. CM1008B.

  • Add to Oxacillin Resistance Screening Agar Base, Part No. CM1008B
  • Each vial supplements 500mL of medium

ORSAB Selective Supplement, Oxoid Composition

Vial contents (each vial is sufficient for 500ml of medium)
per vial
per litre
Polymyxin B

25,000IU

50,000IU
Oxacillin

1.0mg

2.0mg

 

ORSAB Selective Medium Preparation:
Suspend 51.75g of Oxacillin Resistance Screening Agar Base in 500ml of distilled water and bring gently to the boil to dissolve. Sterilise by autoclaving at 121°C for 15 minutes. Cool to 50°C and aseptically add the contents of one vial of ORSAB Selective Supplement SR0195, reconstituted as directed below. Mix well and pour into sterile Petri dishes.

Storage conditions and Shelf life
ORSAB Selective Supplement should be stored at 2-8°C.
Store the prepared medium at 2-8°C.

Gram Safranin BTL/250ml

Brand:

Thermo Scientific™ Remel™

Thermo Scientific™ Remel Gram Safranin is a counterstain used in Gram stain procedures.

  • For qualitative procedures to differentiate gram-positive from gram-negative microorganisms
  • Selected Gram stains are CE marked

Gram Iodine 250ml Bottle

Brand:

Thermo Scientific™ Remel™

Thermo Scientific™ Remel Gram Iodine is a mordant used in Gram stain procedures.

  • For qualitative procedures to differentiate gram-positive from gram-negative microorganisms
  • Selected Gram stains are CE marked