Showing 169–192 of 388 results

Show sidebar

Listeria Enrichment Broth Base UVM 500g

Brand:

Thermo ScientificTM OxoidTM

  • Oxoid Listeria Enrichment Broth Base (UVM Formulation) is a two-step selective enrichment (USDA-FSIS) method.
  • Also available Listeria Primary Enrichment Supplement-UVM I, Part No. SR0142E or SR0142B and Listeria Secondary Selective Enrichment Supplement-UVM II, Part No. SR0143E.
    Listeria Enrichment Broth Base (UVM formulation) is to be used with the appropriate supplement for UVMI broth or UVMII broth.

Listeria Enrichment Broth Base (UVM formulation), Oxoid Composition

Typical Formula*

gm/litre

Proteose peptone

5.0

Tryptone

5.0

`Lab-Lemco’ powder

5.0

Yeast extract

5.0

Sodium chloride

20.0

Disodium hydrogen phosphate

12.0

Potassium dihydrogen phosphate

1.35

Aesculin

1.0

pH 7.4 ± 0.2 @ 25°C

 

Listeria Enrichment Broth, Oxoid Preparation:
Suspend 27.2g in 500ml of distilled water. Sterilise by autoclaving at 121°C for 15 minutes. Cool to 50°C.

To Prepare Listeria Primary Selective Enrichment Medium (UVM I):
Aseptically add the contents of 1 vial of Listeria Primary Selective Enrichment Supplement (UVM I) SR0142 reconsituted as directed. Mix well and distribute into sterile containers.

To Prepare Listeria Secondary Selective Enrichment Medium (UVM II):
Aseptically add the contents of 1 vial of Listeria Secondary Selective Enrichment Supplement (UVM II) SR0143 reconsituted as directed. Mix well and distribute into sterile containers.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.

Precautions
Note the precautions stated under Listeria Selective Medium (Oxford) CM0856 and SR0140.
Broth cultures are more dangerous than colonies on agar plates.
Store prepared medium away from light. Acriflavine can photo-oxidise to form inhibitory compounds against listeriae.

Listeria Primary Enrichment Supplement (UVMI) 1X10Vials

Brand:

Thermo ScientificTM OxoidTM

Thermo Scientific™ Oxoid Listeria Primary Enrichment Supplement (UVMI) is a primary selective enrichment supplement for the isolation of listeria when used with Listeria Enrichment Broth Base (UVM Formulation) CM0863.

Oxoid Listeria Primary Enrichment Supplement (UVMI), Oxoid Composition

Vial contents (each vial is sufficient for 500ml of medium)
per vial
per litre
Nalidixic acid

10.0mg

20.0mg
Acriflavine hydrochloride

6.0mg

12.0mg

 

Listeria Primary Selective Enrichment Medium, Oxoid Preparation:
Suspend 27.2g in 500ml of distilled water. Sterilise by autoclaving at 121°C for 15 minutes. Cool to 50°C.
Aseptically add the contents of 1 vial of Listeria Primary Selective Enrichment Supplement (UVM I) SR0142 reconsituted as directed. Mix well and distribute into sterile containers.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.

Precautions
Note the precautions stated under Listeria Selective Medium (Oxford) CM0856 and SR0140.
Broth cultures are more dangerous than colonies on agar plates.
Store prepared medium away from light. Acriflavine can photo-oxidise to form inhibitory compounds against listeriae.

Listeria Secondary Enrichment Supplement (UVMII) 1x10v

Brand:

Thermo ScientificTM OxoidTM

Oxoid Listeria Secondary Selective Enrichment Supplement, UVMII is used in a two-step selective enrichment (USDS-FSIS) method for the enrichment of Listeria spp.

  • Add to Listeria Enrichment Broth Base (UVM formulation), Part No. CM0863B
  • Each vial supplements 500mL of medium

Listeria Secondary Selective Enrichment Supplement (UVMII), Oxoid Composition

Vial contents (each vial is sufficient for 500ml of medium)
per vial
per litre
Nalidixic acid

10.0mg

20.0mg
Acriflavine hydrochloride

12.5mg

25.0mg

 

Listeria Secondary Selective Enrichment Medium, Oxoid Preparation:
Suspend 27.2g in 500ml of distilled water. Sterilise by autoclaving at 121°C for 15 minutes. Cool to 50°C.
Aseptically add the contents of 1 vial of Listeria Secondary Selective Enrichment Supplement (UVM II) SR0143 reconsituted as directed. Mix well and distribute into sterile containers.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.

Precautions
Note the precautions stated under Listeria Selective Medium (Oxford) CM0856 and SR0140.
Broth cultures are more dangerous than colonies on agar plates.
Store prepared medium away from light. Acriflavine can photo-oxidise to form inhibitory compounds against listeriae.

Listeria Selective Agar Base 500g

Brand:

Thermo ScientificTM OxoidTM

  • Oxoid Listeria Selective Oxford Agar Base is a selective and diagnostic medium for the detection of Listeria monocytogenes.
  • Also available Listeria Selective Supplement, Part No. SR0140E and Modified Listeria Selective Supplement, Part No. SR0206E or SR0206B.

Listeria Selective Oxford Agar Base, Oxoid Composition

Typical Formula*

gm/litre

Columbia Blood Agar Base

39.0

 Aesculin

1.0

 Ferric ammonium citrate

0.5

 Lithium chloride

15.0

 pH 7.0 ± 0.2 @ 25°C

 

Listeria Selective Oxford Agar, Oxoid Preparation:
Suspend 27.75 of the Listeria Selective Agar Base (Oxford Formulation) in 500ml of distilled water. Bring gently to the boil to dissolve. Sterilise by autoclaving at 121°C for 15 minutes. Cool to 50°C and aseptically add the contents of one vial of Listeria Selective Supplement (Oxford Formulation) or Modified Listeria Selective Supplement (Oxford) SR0206, SR0140 reconstituted with 5ml of 70% ethanol. Mix well and pour into sterile Petri dishes.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared plates at 2-8°C in the dark.

Listeria Selective Enrich Supplement 10×2.25 Litres

Brand:

Thermo ScientificTM OxoidTM

Oxoid Listeria Selective Enrichment Supplement, Modified is used for the enrichment of Listeria spp.

  • Modified with 10mg/L acriflavin
  • Add to Listeria Enrichment Broth, Part No. CM0862B
  • Each vial supplements 2.25L of medium

Listeria Selective Enrichment Supplement (Modified), Oxoid Composition

Vial contents (each vial is sufficient for 2,250mls of medium)
per vial
per litre
Nalidixic acid

90.0mg

40.0mg
Cycloheximide

112.5mg

50.0mg
Acriflavine hydrochloride

22.5mg

10.0mg

 

Listeria Selective Enrichment Medium Preparation:
Aseptically add 10ml of distilled water to one vial and invert gently to dissolve. Add the vial contents to 2.25 litres of Listeria Enrichment Broth Base. Sterilize by autoclaving at 121°C for 15 minutes. Cool to 50°C, mix well and distribute into sterile containers in volumes as required .

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.

Listeria Selective Supplement (Oxford) 1 x 10 Vials

Brand:

Thermo ScientificTM OxoidTM

  • Oxoid Listeria Selective Supplement (Oxford) is used for the detection of Listeria monocytogenes.
  • Add to Listeria Selective Agar Base, Part No. CM0856B.

Listeria Selective Supplement (Oxford), Oxoid Composition

Vial contents (each vial is sufficient for 500ml of medium)

per vial

per litre
Cycloheximide
200mg
400mg

Colistin sulphate

10.0mg

20.0mg

Acriflavine

2.5mg

5.0mg

Cefotetan

1.0mg

2.0mg

Fosfomycin

5.0mg

10.0mg

 

Listeria Selective Medium Preparation:
Reconstitute one vial as directed, aseptically add the contents to 500 ml of Listeria Selective Agar Base (Oxford Formulation) CM0856, cooled to approximately 50°C. Mix well and pour into sterile Petri dishes.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared plates at 2-8°C in the dark.

Listeria Selective Supplement 1 x 10 Vials

Brand:

Thermo ScientificTM OxoidTM

Oxoid Listeria Selective Enrichment Supplement is used for the enrichment of Listeria spp.

  • Add to Listeria Enrichment Broth, Part No. CM0862B
  • Each vial supplements 500mL of medium

Listeria Selective Enrichment Supplement, Oxoid Composition

Vial contents: (each vial is sufficient for 500ml of medium)
per vial
per litre
Nalidixic acid

20.0mg

40.0mg
Cycloheximide

25.0mg

50.0mg
Acriflavine hydrochloride

7.5mg

15.0mg

 

Listeria Selective Enrichment Medium Preparation:
Reconstitute one vial as directed, and add the contents to 500ml of  Listeria Enrichment Broth Base (CM0862). Sterilize by autoclaving at 121°C for 15 minutes. Cool to 50°C and mix well before distributing into sterile containers in volumes as required.

Storage conditions and Shelf life
Listeria Selective Enrichment Supplement SR0141 as supplied should be stored at 2-8°C. When stored as directed the reagents are stable until the expiry date printed on the label.

Precautions
Listeria Selective Enrichment Supplement contains cycloheximide and is toxic if swallowed, inhaled or by skin contact. As a precaution when handling wear gloves and eye/face protection.
Acriflavine is activated by light and may form compounds inhibitory for Listeria.

Litmus Milk, for Microbiology, NutriSelect® Plus, Sigma

Brand:

Sigma-Aldrich

Application

For maintenance of Lactobacilli and for determining the action of bacteria on milk.

Typical Formula *
gm/litre
Litmus

0.5

Skim Milk Powder

100

Sodium Sulfite

0.5

Final pH: 6.8±0.2 (25 °C)

 

Liver Desic Bacteriological

Brand:

Thermo ScientificTM OxoidTM

Prepare Liver infusion media with Thermo Scientific™ Oxoid™ Liver Desiccated Bacteriological. Liver Desiccated is prepared by the dehydration of fresh pork livers under carefully controlled conditions designed to ensure maximum retention of nutritive properties, and is equivalent to five times its weight of fresh liver.

  • Dehydrated whole liver, specially manufactured for the preparation of infusion media.
  • Not all products are available for sale in all territories. Please inquire.
  • Remel™ and Oxoid™ products are now part of the Thermo Scientific brand.

Liver Digest Neutralised 500g

Brand:

Thermo ScientificTM OxoidTM

The Oxoid Liver Digest Neutralized is a biologically standardized papaic digest of ox liver for use as a source of nutrients in microbiological culture media.

Lysine Iron Agar 500g

Brand:

Thermo ScientificTM OxoidTM

Detect salmonellae including Salmonella arizonae with the diagnostic Thermo Scientific™ Oxoid™ Lysine Iron Agar (Dehydrated). This differential medium detects salmonellae (including lactose fermenting Salmonella arizonae) by lysine decarboxylase activity and H2S production.

Lysine Iron Agar, Oxoid Composition

Typical Formula*

gm/litre

Bacteriological peptone

5.0

Yeast extract

3.0

Glucose

1.0

L-lysine

10.0

Ferric ammonium citrate

0.5

Sodium thiosulphate

0.04

Bromocresol purple

0.02

Agar

14.5

pH 6.7 ± 0.2 @ 25°C

 

Lysine Iron Agar, Oxoid Preparation:
Suspend 34g in 1 litre of distilled water. Bring to the boil to dissolve completely. Dispense into tubes and sterilise by autoclaving at 121° C for 15 minutes. Cool the tubes in an inclined position to form slants with deep butts.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8° C.

Lysine Medium 500g

Brand:

Thermo ScientificTM OxoidTM

Isolate and enumerate wild yeasts encountered in brewing while suppressing pitching yeasts with Thermo Scientific™ Oxoid™ Lysine Medium (Dehydrated). This complex, synthetic medium is based on the original formula of Morris & Eddy which utilizes the susceptibility of pitching yeasts to lysine to differentiate it from the wild yeast.

Lysine Medium, Oxoid Composition

Typical Formula*

gm/litre

Glucose

44.5

Potassium dihydrogen phosphate

1.78

Magnesium sulphate

0.89

Calcium chloride fused

0.178

Sodium chloride

0.089

Adenine

0.00178

DL-methionine

0.000891

L-histidine

0.000891

DL-tryptophane

0.000891

Boric acid

0.0000089

Zinc sulphate

0.0000356

Ammonium molybdate

0.0000178

Manganese sulphate

0.0000356

Ferrous sulphate

0.0002225

Lysine

1.0

Inositol

0.02

Calcium pantothenate

0.002

Aneurine

0.0004

Pyridoxine

0.0004

p-aminobenzoic acid

0.0002

Nicotinic acid

0.0004

Riboflavin

0.0002

Biotin

0.000002

Folic acid

0.000001

Agar

17.8

pH (see directions)

 

Lysine Medium, Oxoid Preparation:
Suspend 6.6g in 100ml distilled water containing 1.0ml Potassium lactate SR0037. Bring to the boil to dissolve completely. Agitate frequently to prevent superheating. Cool to 50°C and add 0.1ml of lactic acid 10% SR0021 to adjust to pH 4.8 ± 0.2. Dispense into Petri dishes and remove surface moisture by drying at 37°C.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.

M-Endo Agar (LES) 500g

Brand:

Thermo ScientificTM OxoidTM

  • Oxoid Membrane Endo Agar LES (m Endo AgarLES) is an APHA recommended medium for the confirmation of coliforms.
  • Also available Basic Fuchsin Indicator, Part No. BR0050A.

Membrane Endo Agar LES, Oxoid Composition

Formula

gm/litre

Yeast extract1.2
Tryptone3.7
Peptone P3.7
Tryptose7.5
Lactose9.4
Dipotassium phosphate3.3
Monopotassium phosphate1.0
Sodium chloride3.7
Sodium desoxycholate0.1
Sodium lauryl sulphate0.05
Sodium sulphite1.6
Agar10.0
pH 7.2 ± 0.2

 

Membrane Endo Agar LES, Oxoid Preparation:
Suspend 45 grams in 1 litre of distilled water. Add 12ml of a 10% w/v solution of Basic Fuchsin. Heat gently with frequent agitation until the medium boils. DO NOT AUTOCLAVE. Cool to 45°C and dispense into 50-60 mm dishes in 4 ml volumes. For larger dishes use sufficient medium to give an equivalent depth (approx. 1.5 mm).
Plates should be protected from light and may be stored for up to two weeks in the refrigerator.

Storage conditions and Shelf life
Store the dehydrated medium below 25°C and use before the expiry date on the label.
Store the prepared medium in the dark and at 2-8°C.

M.R.S. Broth 500g

Brand:

Thermo ScientificTM OxoidTM

Isolate and enumerate lactic acid bacteria from food with Thermo Scientific™ Oxoid™ MRS Broth (DeMan, Rogosa and Sharpe) (Dehydrated). This non-selective medium is designed to support profuse growth of lactic acid bacteria.

MRS Broth (DeMan, Rogosa and Sharpe), Oxoid Composition

Typical Formula*

gm/litre

Peptone

10.0

`Lab-Lemco’ powder

8.0

Yeast extract

4.0

Glucose

20.0

Sorbitan mono-oleate

1 ml

Dipotassium hydrogen phosphate

2.0

Sodium acetate 3H2O

5.0

Triammonium citrate

2.0

Magnesium sulphate 7H2O

0.2

Manganese sulphate 4H2O

0.05

pH 6.2 ± 0.2 @ 25°C

 

MRS Broth (DeMan, Rogosa and Sharpe), Oxoid Preparation:
Add 52g to 1 litre of distilled water at approximately 60°C. Mix until completely dissolved. Dispense into final containers and sterilise by autoclaving at 121°C for 15 minutes.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.

M17 Agar 500g, Oxoid

Brand:

Thermo ScientificTM OxoidTM

M17 Agar, Oxoid is used for the improved growth of Lactic Streptococci and their bacteriophages and the selective enumeration of Streptococcus thermophilus from yogurt.

M17 Agar, Oxoid Composition

Typical Formula*

gm/litre

Tryptone

5.0

Soya peptone

5.0

Meat digest

5.0

Yeast extract

2.5

Ascorbic acid

0.5

Magnesium sulphate

0.25

Di-sodium-glycerophosphate

19.0

Agar

11.0

pH 6.9 ± 0.2 @ 25°C

 

M17 Agar, Oxoid Preparation:
Suspend 48.25g in 950ml of distilled water and bring gently to the boil. Sterilise by autoclaving at 121°C for 15 minutes. Cool to 50°C and add 50ml of sterile lactose solution (10% w/v).

Lactose solution 10% (w/v):
Dissolve 10g of Lactose Code LP0070 in 100ml of distilled water. Sterilise by autoclaving at 121°C for 15 minutes or by membrane filtration through a 0.2µm membrane.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.

M17 Broth 500g

Brand:

Thermo ScientificTM OxoidTM

Cultivate lactic streptococci and their bacteriophages with Thermo Scientific™ Oxoid™ M17 Broth (Dehydrated). The use of M17 Broth in conjunction with M17 Agar is recommended by Terzaghi and Sandine for bacteriophage assays.

M17 Broth, Oxoid Composition

Typical Formula*

gm/litre

Tryptone

5.0

Soya peptone

5.0

`Lab-Lemco’ powder

5.0

Yeast extract

2.5

Ascorbic acid

0.5

Magnesium sulphate

0.25

Di-sodium-glycerophosphate

19.0

pH 6.9 ± 0.2 @ 25°C

 

M17 Broth, Oxoid Preparation:
Suspend 37.25g in 950ml of distilled water and bring gently to the boil. Sterilize by autoclaving at 121°C for 15 minutes. Cool to 50°C and aseptically add 50ml of sterile lactose solution (10% w/v).

Lactose solution 10% (w/v):
Dissolve 10g of Lactose Code LP0070 in 100ml of distilled water. Sterilise by autoclaving at 121°C for 15 minutes or by membrane filtration through a 0.2mm membrane.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.

Mac-Conkey Agar (Without Salt) 500g

Brand:

Thermo ScientificTM OxoidTM

  • Oxoid MacConkey Agar w/o Salt (Dehydrated) is a differential medium on which swarming of Proteus species is suppressed.
  • For urine examination.

MacConkey Agar without Salt (Dehydrated), Oxoid Composition

Typical Formula*

gm/litre

Peptone

20.0

Lactose

10.0

Bile salts

5.0

Neutral red

0.075

Agar

12.0

pH 7.4 ± 0.2 @ 25°C

 

MacConkey Agar, Oxoid Preparation:
Suspend 47g in 1 litre of distilled water. Bring to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes. Mix well before pouring. Dry the surface of the gel before inoculation.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared plates of medium at 2-8°C.

Precautions
The colonial characteristics described give presumptive identification only of the isolated organisms. It is necessary to subculture and carry out confirmation tests for final identification.
To enhance the pigment of suspected Staphylococcus aureus, hold the plates on the bench at ambient temperature for 12-18 hours.
This medium may produce a discrete precipitate on cold storage of 2 – 10°C. This in no way affects the performance of the medium.

MacConkey Agar 500g, Oxoid

Brand:

Thermo ScientificTM OxoidTM

MacConkey agar, Oxoid is used to detect, isolate and enumerate coliforms and intestinal pathogens in water, dairy products and biological specimens. This differential medium gives a number of diagnostic indications such as bile tolerance, colony morphology and chromogenesis. MacConkey Agar corresponds to the medium recommended by the World Health Organizaton, the Department of Health for the bacterial examination of water.

Composition of MacConkey Agar (Oxoid)

Typical Formula *
gm/litre
Peptone

20.0

Lactose

10.0

Bile Salts

5.0

Sodium chloride

5.0

Agar

12.0

pH 7.4 ± 0.2 @ 25°C

 

Preparation of MacConkey Agar (Oxoid):

Suspend 52g of MacConkey agar powder in 1 litre of distilled water. Bring to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes.

Storage conditions and Shelf life of MacConkey Agar (Oxoid)
Store the dehydrated MacConkey agar powder at 10-30°C and use before the expiry date on the label.
Store the prepared MacConkey agar at 2-8°C.

MacConkey Agar No.2 500g

Brand:

Thermo ScientificTM OxoidTM

Oxoid MacConkey Agar No. 2 is a modification of MacConkey Agar No. 3 with addition of Bile Salts No. 2 for detection of Enterococci.

MacConkey Agar No. 2, Oxoid Composition

Typical Formula*

gm/litre

Peptone

20.0

Lactose

10.0

Bile salts No.2

1.5

Sodium chloride

5.0

Neutral red

0.05

Crystal violet

0.001

Agar

15.0

pH 7.2 ± 0.2 @ 25°C

 

MacConkey Agar, Oxoid Preparation:
Suspend 51.5g in 1 litre of distilled water. Bring to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared plates at 2-8°C.

MacConkey Agar No.3 500g

Brand:

Thermo ScientificTM OxoidTM

Detect and enumerate coliform organisms, including Escherichia coli, while isolating and detecting Salmonella and Shigella spp. in both clinical and food specimens using Thermo Scientific™ Oxoid™ MacConkey Agar No.3. A modification of the original MacConkey medium by the addition of selected bile salts, the medium gives improved differentiation of coliforms and non-lactose fermenting organisms while completely inhibiting Gram-positive cocci.

MacConkey Agar No.3, Oxoid Composition

Typical Formula*

gm/litre

Peptone

20.0

Lactose

10.0

Bile salts No.3

1.5

Sodium chloride

5.0

Neutral red

0.03

Crystal violet

0.001

Agar

15.0

pH 7.1 ± 0.2 @ 25°C

 

MacConkey Agar, Oxoid Preparation:
Suspend 51.5g in 1 litre of distilled water. Bring to the boil to dissolve completely. Sterilise by autoclaving at 121°C for 15 minutes.

Storage conditions and Shelf life
The dehydrated medium should be stored at 10-30°C and used before the expiry date on the label.
Store the prepared medium at 2-8°C.

MacConkey Broth 500g

Brand:

Thermo ScientificTM OxoidTM

Identify coliforms from water and milk samples with differential Thermo Scientific™ Oxoid™ MacConkey Broth (Dehydrated). MacConkey Broth is the standard medium for the primary isolation of coliform bacteria, and has been recommended for this purpose by the Public Health Laboratory Service Water Committee and the World Health Organization. MacConkey Broth also conforms to the formulation specified by the UK Dept. of Health for milk grading.

MacConkey Broth, Oxoid Composition

Typical Formula*

gm/litre

Peptone

20.0

Lactose

10.0

Bile salts

5.0

Sodium chloride

5.0

Neutral red

0.075

pH 7.4 ± 0.2

 

MacConkey Broth, Oxoid Preparation:
To prepare single strength broth, add 40g to 1 litre of distilled water. Mix well and distribute into containers fitted with fermentation (Durham) tubes. Sterilise by autoclaving at 121°C for 15 minutes.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.

Precautions
The neutral red indicator is carefully selected for this formulation and therefore shows no inhibitory effect. However, the more sensitive reaction of bromocresol purple in MacConkey Broth Purple (CM0505) is often preferred.

MacConkey Broth (Purple) (CM5a) 500g

Brand:

Thermo ScientificTM OxoidTM

Detect coliform organisms in water and milk examination with Thermo Scientific™ Oxoid™ MacConkey Broth Purple (Dehydrated). Bromocresol purple indicator in the medium provides more sensitive and definite indications of acid production as compared to neutral red indicator and is less inhibitory to Escherichia coli. The use of bromocresol purple corresponds to the alternative formulations recommended in ‘The Bacteriological Examination of Water Supplies’ and ‘International Standard for Drinking Water’.

MacConkey Broth Purple, Oxoid Composition

Typical Formula*

gm/litre

Peptone

20.0

Lactose

10.0

Bile salts

5.0

Sodium chloride

5.0

Bromocresol purple

0.01

pH 7.4 ± 0.2 @ 25°C

 

MacConkey Broth Purple, Oxoid Preparation:
To prepare single strength broth add 40g to 1 litre of distilled water. Distribute into containers fitted with fermentation (Durham) tubes. Sterilise by autoclaving at 121°C for 15 minutes.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at room temperature.

Malt Extract Agar 500g

Brand:

Thermo ScientificTM OxoidTM

Detect, isolate and enumerate yeasts and molds with Thermo Scientific™ Oxoid™ Malt Extract Agar (Dehydrated). Mycological peptone in the medium gives a luxuriant growth of yeasts and molds with typical morphology and pigmentation.

Malt Extract Agar, Oxoid Composition

Typical Formula*

gm/litre

Malt extract

30.0

Mycological peptone

5.0

Agar

15.0

pH 5.4 ± 0.2

 

Malt Extract Agar, Oxoid Preparation:
Suspend 50g in 1 litre of distilled water and boil to dissolve. Sterilise by autoclaving at 115°C for 10 minutes.

If it is desired to adjust the medium to pH 3.5, cool to 55°C and add approximately 2-3ml of 10% Lactic Acid SR0021 to 100ml Malt Extract Agar. Once acidified with lactic acid, the medium should not be re-heated.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.

Malt Extract Broth 500g

Brand:

Thermo ScientificTM OxoidTM

Oxoid Malt Extract Broth is used for the identification of yeast and molds in sterility testing.

Malt Extract Broth, Oxoid Composition

Typical Formula*

gm/litre

Malt extract

17.0

Mycological peptone

3.0

pH 5.4 ± 0.2

 

Malt Extract Broth, Oxoid Preparation:
Add 20g to 1 litre of distilled water. Mix well, distribute into final containers and sterilise by autoclaving at 115°C for 10 minutes. This liquid medium is recommended for the cultivation of moulds and yeasts, during tests for sterility, etc.

Storage conditions and Shelf life
Store the dehydrated medium at 10-30°C and use before the expiry date on the label.
Store the prepared medium at 2-8°C.